Instructions / Assembly

ManualsBrandsMultinautic ManualsBoat DocksQP-427D 12 ft. L x 52 in. W Aluminum Stationary Dock Kit

ALUMINUM

STATIONARY DOCK KIT

QP-427D

21114)

Assembly and

Installation

Guide

This booklet will guide you through the steps you need to take to complete this project.

Please read the instructions carefully to ensure that the assembly is carried out correctly

and safely. To do so, please respect the following:

> Make sure that all bolts and nuts are bolted properly.

> Do not modify this dock system beyond the recommendations described in this manual.

The warranty will be void if altered or repaired.

> Wear protection glasses, gloves and work boots when assembling the dock.

> Keep children and pets away while assembling your dock.

> The load capacity of this structure is limited to 4 persons or 800 lbs (363 kg).

Toll-free line : 1-800-585-1237 l info@multinautic.com

Congratulations

on your new dock!

ASSEMBLE - ENJOY - SHARE

Summary of content (6 pages)

PAGE 1
Congratulations on your new dock! ALUMINUM STATIONARY DOCK KIT QP-427D This booklet will guide you through the steps you need to take to complete this project. Please read the instructions carefully to ensure that the assembly is carried out correctly and safely. To do so, please respect the following: > Make sure that all bolts and nuts are bolted properly. > Do not modify this dock system beyond the recommendations described in this manual. The warranty will be void if altered or repaired.
PAGE 2
INCLUDED PARTS QP-427D # 21114 Components included in the box for assembling the frame Aluminum Side Beam x4 Fusion Plate x2 End Cross Member with Leg Holder x2 Cross Member x2 Central Support x2 Spacer x4 Union Plate x1 Components included in the box for the installation Junction S.S. Hex bolt 1/2" x 1" Plate x8 x2 Parallel Round head Adapter 1/4" x 2" x1 x2 Corner Adapter x1 S.S.
PAGE 3
STRUCTURE Before starting assembly, we strongly recommend reading the instructions on page 5 as conﬁguration adaptors may be combined with the structural parts. Place the parts to be assembled on the ﬂoor to visualize the steps to follow. Combine the aluminum parts by following the steps illustrated below. Screw the nuts by hand to start and once completed, tighten the assembly. If it is diﬃcult to insert a bolt into a hole, you can enlarge it by passing a metal drill bit through it.
PAGE 4
DECKING As indicated on page 2, diﬀerent types of decking can complete this dock. Multinautic® oﬀers pre-conﬁgured packages of cedar or polymer decking. Those Decking Kits have their own installation guide. If you prefer to install your own wood, here are the required elements for its construction and the steps to follow: > 150 deck screws #8 x 1 ¾” > 18 ﬂat head stainless steel screws #10 x 1 ¾’’ > 17 cedar planks: 5/4 in. (actually one-inch thick) x 6 in. x 8 ft (2.
PAGE 5
INSTALLATION A B JUNCTION PLATES AND LAYOUT ADAPTERS Plan the installation of your docks according to the possibilities shown in the diagrams beside. Whether end-to-end (A), "L" shaped (B) or parallel (C), there are many possible combinations. Note that: > the Junction Plates (A), for a straight line installation, will be combined with the Leg Holders with the stainless steel hexagonal bolts; > the Corner Adapters (B) will use the bolts of a Leg Holder and their own 1/2" bolts with nut.
PAGE 6
Discover a whole range of accessories and ramps on Multinautic.com Suggestions of complementary products for your QP-427D™ Stationary Dock Installation Accessories > Diagonal Brace #22034 > Additional Posts (4, 6 or 8 ft.) and Base Plates for special conﬁgurations > 24 in. Dock Wheels with galvanized steel Hubs Mooring Accessories > Aluminum & PVC 30 in.