Cut Sheet

ManualsBrandsMultiple ManualsConduitLiquidtight, Type UA, 1-1/2", Gray, 150' Coil

Anaconda SEALTITE

UL Listed, CSA Certiﬁ ed

Liquid-Tight Flexible Metal Conduit (LFMC)

Type UA

ANAMET Electrical, Inc. CAT-UA-120701 7

Construction

• Constructed of continuously interlocked hot dipped

zinc galvanized steel core for exceptional crush and

corrosion resistance.

• Durable, sunlight resistant and ﬂ ame retardant

thermoplastic PVC jacket that resists heat, oil and

chemical breakdown.

• Convenient markings in feet for easy measurement.

Installation

• Conduit used with standard liquid-tight connector

for easy installation. IP 67 Rated when installed with

approved connectors.

• Approved for both exposed and concealed locations.

Rated for temperature ranges -4ºF to + 140ºF (-20ºC

to +60ºC).

• Approved as an equipment grounding conductor in

sizes 3/8" through 1-1/4" if the total grounding path is 6

ft. or less and the circuit conductors are protected by

over 20 amps for 3/8" and 1/2" and 60 amps or less for

3/4" through 1-1/4".

• Suitable for use in hazardous locations per NEC

Articles 501 Class I Div. 2, Article 502 Class II

Div. 1 & 2, Article 503 Class III Div. 1 & 2.

• Manufactured in a full range of trade sizes from 3/8"

through 4".

• Approved for direct burial and in concrete trade sizes

3/8" through 4".

• Complies with UL Standard 360 File No. E18917; CSA

C22.2 File No. 158897; and NEC Article 350.

Square-Locked Design with integral bonding wire 3/8" through 1-1/4"

Interlocked Design 1-1/2" through 4" with no bonding wire

NEC Articles

• Article 250.118 (6) Equipment Grounding

• Article 300.22 (D) Information Technology Equipment

• Article 350 Liquid-Tight Flexible Metal Conduit (LFMC)

• Article 501.10 (B) (2) Class I Div. 2

• Article 502.10 (A) (2) and (B) (2) Class II Div. 1 & 2

• Article 503.10 (A) (3) and (B) Class III Div. 1 & 2

• Article 620.21 Elevator Wiring Methods

• Article 645.5 (E) (2) Under Raised Floors

www.ul.com www.csa-international.org

www.nfpa.org www.naed.org

www.nema.org www.anametelectrical.com

U.L. LISTED • CSA CERTIFIED • RoHS WEEE COMPLIANT

Type UA

Gray or Black thermoplastic PVC jacket with integral

bonding wire 3/8" through 1-1/4"

Product Speciﬁ cations Ordering Information

Approx

Inside Approx

Electrical Bend Weight

Trade Size Inside Diameter Outside Diameter Radius lbs. Small Carton Standard Carton Small Reels Standard Reels

Inches mm Inches Inches Inches PER Length NAED Length NAED Length NAED Length NAED

MIN. MAX. MIN. MAX. 100 FT. Feet PIN Feet PIN Feet PIN Feet PIN

3/8 12 .484 – .504 .690 – .710 3.0 25 100 34202 200 34201 800 34204 1500 34203

1/2 16 .622 – .642 .822 – .840 3.5 29 100 34212 200 34211 500 34214 1000 34213

3/4 21 .820 – .840 1.030 – 1.050 5.0 44 100 34222 150 34221 500 34228 1000 34229

1 27 1.041 – 1.066 1.290 – 1.315 6.0 73 100 34231 400 34238

1-1/4 35 1.380 – 1.410 1.630 – 1.660 7.0 100 50 34241 250 34248

1-1/2 41 1.575 – 1.600 1.865 – 1.900 5.5 112 50 34251 150 34254

2 53 2.020 – 2.045 2.340 – 2.375 7.0 148 50 34261 100 34268

2-1/2 63 2.480 – 2.505 2.840 – 2.875 9.5 182 25 34272 100 34274

3 78 3.070 – 3.100 3.460 – 3.500 15 255 25 34281 100 34284

3-1/2 91 3.500 – 3.540 3.960 – 4.000 16 314 25 34301 100 34304

4 103 4.000 – 4.040 4.460 – 4.500 17 362 25 34291 100 34294

Note: 1. Gray - Speciﬁ cation above.

2. Black - Change third number in NAED code to “0”.

3. Other Colors are available upon request.

TYPICAL SPECIFICATION:

Conduit shall be Anaconda SEALTITE

Type UA. Conduit shall provide a ﬂ exible liquid-tight raceway for wiring and shall be constructed of continuously

interlocked hot dipped zinc galvanized steel core with an integral bonding wire in sizes 3/8" thru 1-1/4". Conduit shall have a sunlight resistant and ﬂ ame

retardant PVC jacket in electrical trade sizes 3/8" thru 4". Conduit shall be UL listed, CSA certiﬁ ed and IP 67 rated when installed with approved end connectors.