Cut Sheet

CONDUIT COUPLINGS
Galvanized Steel, Aluminum and Stainless Steel 304
Size Threads OD Min.
per inch Length
1/2 14 1.010 1-5/8
3/4 14 1.250 1-41/64
1 11-1/2 1.525 1-31/32
1-1/4 11-1/2 1.869 2-1/32
1-1/2 11-1/2 2.155 2-1/16
2 11-1/2 2.650 2-1/8
2-1/2 8 3.250 3-3/16 Notes:
3 8 3.870 3-5/16 Galvanized Couplings meet UL6 and C80.1
3-1/2 8 4.500 3-13/32 Stainless Steel 304 Couplings meet UL6A
4 8 4.875 3-33/64 Stainless Steel 304 Couplings available only upto 4" size
5 8 6.000 3-61/64 OD for Stainless Steel Couplings may be larger than shown
6 8 7.100 4-1/4
CONDUIT NIPPLES
Galvanized Steel, Aluminum and Stainless Steel 304
Size Close
Length 1-1/2 2 2-1/2 3 3-1/2 4 4-1/2 5 5-1/2 6 8 10 12
1/2 1-1/8
3/4 1-3/8
1 1-1/2
1-1/4 1-5/8
1-1/2 1-3/4
2 2
2-1/2 2-1/2
3 2-5/8
3-1/2 2-3/4
4 2-7/8
5 3
6 3-1/8
Notes:
Sizes shown in yellow are available from stock
Lengths longer than 12" and Special Threading available upon request
Both ends NPT threads conform to ANSI B1.20.1
RUNNING THREAD
Size Threads OD
per inch
1/2 14 0.823
3/4 14 1.034
1 11-1/2 1.293
1-1/4 11-1/2 1.638
1-1/2 11-1/2 1.877
2 11-1/2 2.351
2-1/2 8 2.841
3 8 3.467
3-1/2 8 3.968
4 8 4.466 Notes:
5 8 5.528 Running Threads have NPSM Threads
6 8 6.585 Running Threads are Galvanized
Conduit Pipe Products Company Phone: [phone]
A Member of The Phoenix Forge Group
Toll Free:
800 848-6125
1501 West Main Street Fax: [phone]
West Jefferson, OH 43162
Website:
www.conduitpipe.com
Length