Cut Sheet

Galvanized Ground Rod, Pointed–811380
Meets ANSI
®
/NEMA
®
GR1
Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion, in accordance with ASTM
®
specification
A153-78
Surfaces are rigidly inspected to eliminate seams, slivers and other defects
L
Ø
Part Number 811380
Material Steel
Finish Hot-Dip Galvanized
Tensile Strength 80,000 psi Min
Ground Rod Diameter, Nominal 1/2"
Ground Rod Diameter, Actual (Ø) 0.507"
Length (L) 8'
Unit Weight 5.4 lb
UPC Label No
Standard Packaging Quantity 10 pc
UPC 78285633912
ANSI is a registered trademark of American National Standards Institute. ASTM is a registered trademark of American Society for Testing and Materials. NEMA is a registered service
mark of National Electrical Manufacturers Association.
WARNING
Pentair products shall be installed and used only as indicated in Pentair’s product instruction sheets and training materials. Instruction sheets are available at erico.pentair.com and
from your Pentair customer service representative. Improper installation, misuse, misapplication or other failure to completely follow Pentair’s instructions and warnings may cause
product malfunction, property damage, serious bodily injury and death and/or void your warranty.
© 2016PentairAll rights reserved
Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates.
All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

Summary of content (1 pages)