Cut Sheet

www.carlon.com
13
Accessories
Std.
Part No. Size Ctn. Qty.
CC120B 8" 10
Std.
Part No. Size Ctn. Qty.
CC125 9" 12
Std.
Part No. Size Ctn. Qty.
CC122 17
1
/2"1
Hand held cutter makes fast square, smooth
field cuts on conduit, sizes
1
/ 2 " through 1
1
/ 4 ".
Produces burr-free cut with no shavings.
Fits into pocket or pouch.
For clean cuts of conduit, sizes
1
/ 2 " through 2".
For fast, smooth field cuts of
1
/ 2 " through 1" Flex-Plus
®
Blue ENT.
Small Cutter
Medium Cutter
Large Cutter
Other tapes are available. Consult your sales service location for additional information.
Part. No. Size Tensile Strength Reel Lengths
TL14505
1
/2" 12 50 lbs. 5,000 ft.
TL14510
1
/2" 1250 lbs. 10,000 ft.
TL38203
5
/8" 1800 lbs. 3,000 ft.
TL38265
5
/8" 1800 lbs. 6,500 ft.
TL38210
5
/8" 1800 lbs. 10,000 ft.
PVC Conduit Cutters
Tape
Prelubricated, woven polyester tape made from low friction, high abrasion resistant yarns
providing a low coefficient of friction. Tape is printed with sequential footage markings for
accurate measurements.
Cement
(MSDS sheets available at www.carlon.com)
All Weather – ENT Blue
Meets ASTM D-2564
Recommended pipe
application and sizes
Set-up time
(Evaporation Rate)
Recommended
installation
temperature
Lap Shear
@ 73˚F
Viscosity at
75˚ as
manufactured
Required for use with Flex-Plus
®
Blue
ENT (Electrical Nonmetallic Tubing),
Riser-Gard
®
, P&C Flex
®
, and Carlon PVC
fittings.
Up through 6" diameter.
-5˚–10˚F 6-8 minutes
10˚–30˚F 4-5 minutes
30˚–50˚F 3-4 minutes
50˚–70˚F 1-2 minutes
70˚–90˚F
1
/2-1
1
/2 minutes
-5˚ to 100˚F 2 hrs. 350 psi
16 hrs. 800 psi
72 hrs. 1,500 psi
400-700 cps
Part No Size Applicator Description Ctn. Qty. Ctn. Wt. (lbs.)
VC9992 Quart Dauber All Weather “Quick-Set” Blue 12 29.0
ENT cement required for use
with ENT and Rigid
Nonmetallic Conduit fittings
2B43_12-07 1/10/08 11:33 AM Page 13