Cut Sheet
PRODUCT DATA SHEET
Controlled Document - Engineering Drive
1530 Shields Drive
Waukegan, IL 60085
Toll-Free (800) 323-9355
Fax: (847) 689-1192
PART NUMBER: 41104
DESCRIPTION: 12 AWG MTW CABLE
CONSTRUCTION: This cable consists of one bare copper conductor with integral insulation and jacket.
APPROVALS: UL Standards 83, 758, 1063 and 1426, CSA 22.2 No's 127 and 210.
APPLICATION: Boat Cable, Thermoplastic Wire, Machine Tool Wire, Appliance Wiring Material, and Equipment Wire
Construction Parameters:
Conductor 12 AWG Bare Copper
Stranding 65/30
Insulation Material PVC
Insulation Thickness 0.031'' Nom.
Insulated Conductor Diameter 0.155'' Nom.
Approximate Cable Weight 26.8 Lbs/1M' Nom.
Flame Rating VW-1 or FT1 Vertical Flame Test
Electrical Properties:
Temperature Rating
-30
O
C to 105
O
C Dry
60
O
C Oil
60
O
C Water
Operating Voltage 600 V RMS Max., 1000V AWM Style 1032
DC Resistance per Conductor @ 20
O
C
1.62 Ohms/1M' Nom.
Ampacity per NFPA 79 Table 12.5.1* 29 Amps Max.
Insulation/Jacket Color
Colors vary - Consult factory for availablity.
Legend (Surface Ink Print)
12 AWG (3.31mm2) E125352 (UL) BC-5W2 OR MTW FLEXING OR THHW OR AWM
1011/1015/1230/1335 600V OR 1032 1000V MOISTURE RESISTANT VW-1 -- 156016 CSA TEW
105C 600V FT1 OR AWM I A/B 105C 600V FT1
This product complies with European Directive 2002/95/EC (RoHS)
* Ampacities converted to 105C ampacity using 60C cable temperature and 30C ambient from NFPA 79 Table 12.5.1.
Final determination of wire size/ampacity will be governed by local jurisdiction.
Ampacities are provided for engineering information only. Coleman cannot recommend or express the use of this ampacity.
On special orders, the customer will accept all factory lengths and +/- 10 percent of total order requested.
The information presented here is, to the best of our knowledge, true and accurate. Since conditions of use are beyond Southwire's
control all product data presented is for informational purposes only and does not create a binding obligation or liability on Southwire
or confer any rights on any customer. The sale of products(s) is conditioned upon acceptance of a purchase order subject to
Southwire's standard terms and conditions contained therein, including without limitation Southwire's standard warranty. Southwire
disclaims all liability in connection with the use of information contained herein or otherwise.
This specification is proprietary intellectual property of Southwire. Any information contained herein shall not be disclosed to any
party without written consent of Southwire.
Specification Issue Date: August 18, 2015
1-800-323-9355 (Phone)
1-847-689-1192 (Fax)
41104.xls
Designed By: PEP
© 2015 Southwire