Cut Sheet

Pipe
Medium
Weight
• Zinc Plated Steel (After Fabrication)
• Inverted Rib For Strength
• For E.M.T. / Pipe
One Hole Straps are used to secure cables,
tubing, pipe or E.M.T. to a surface
One Hole Straps | PC 5160
• 12 Gauge Steel
• 16 Gauge Steel
• Various Lengths
FITTINGS & STAMPINGS
C4
Plate Straps | PC 5150
To Order: Phone [phone] / Fax [phone]
PS129 60010 1-1/2 x 9" 50 50 16.66# C
PS1212 60012 1-1/2 x 12" 50 50 23.50# C
PS1218 60014 1-1/2 x 18" 50 50 36.00# C
PS1224 60016 1-1/2 x 24" 50 50 41.20# C
PS169 60018 1-1/2 x 9" 50 50 9.14# C
PS1612 60020 1-1/2 x 12" 50 50 15.40# C
PS1618 60022 1-1/2 x 18" 50 50 19.58# C
PS1624 60024 1-1/2 x 24" 50 50 28.50# C
CAT NO UPC SIZE STD MSTR WT/STD UNIT
16 Gauge
12 Gauge
TW14 27745 1/4" 18 GA 100 1000 0.57# C
TW38 27750 3/8" 18 GA 100 1000 1.15# C
TW50-1 27700 1/2" 18 GA 100 1000 2.22# C
TW75 27705 3/4" 18 GA 100 1000 3.12# C
TW100 27710 1" 18 GA 100 500 3.45# C
TW125 27715 1-1/4" 15 GA 100 500 5.49# C
TW150 27720 1-1/2" 15 GA 50 500 3.86# C
TW200 27725 2" 13 GA 50 500 7.10# C
TW250 27726 2-1/2" 9 GA 25 100 10.13# C
TW300 27727 3" 9 GA 25 100 13.38# C
TW350 27728 3-1/2" 7 GA 25 100 16.61# C
TW400 27729 4" 7 GA 25 100 19.02# C
MTW50 27730 1/2" 14 GA 100 1000 3.62# C
MTW75 27735 3/4" 14 GA 100 1000 4.17# C
MTW100 27740 1" 14 GA 100 500 5.45# C
HW50 27800 1/2" 18 GA 100 1000 2.53# C
HW75 27805 3/4" 18 GA 100 1000 3.19# C
HW100 27810 1" 14 GA 100 1000 6.66# C
HW125 27815 1-1/4" 13 GA 50 500 5.49# C
HW150 27820 1-1/2" 11 GA 50 500 8.36# C
HW200 27825 2" 11 GA 50 500 10.66# C
MHW50 27830 1/2" 14 GA 100 1000 3.82# C
MHW75 27835 3/4" 14 GA 100 1000 5.00# C
MHW100 27840 1" 14 GA 100 1000 6.71# C
* Accommodates 12-2, 12-3, 10-2, 10-3 BX
CAT NO UPC TYPE SIZE GAUGE STD MSTR WT/STD UNIT
BX
*
E.M.T.
E.M.T./Pipe
Coaxial
Pipe
E.M.T.
Medium
Weight
UPC Approved (Plumbing Code)
Plate straps are nailed across studs to
restrain pipe between studs; installed
over utility pipes & electrical wire that
pass through framing members to
prevent piercing.