Cut Sheet

Alcan Cable’s Multiplexed Overhead Service and Secondary Cables provide
exceptional performance and reliability. Alcan provides a full range of overhead
service and secondary cables available in constructions of one or more insulated
conductors and one bare neutral conductor. Insulation on the phase conductors
can be black low density crosslinked polyethylene (XLPE) or black high molecular
weight – low density polyethylene (PE) depending upon the application. To ensure
exceptional product quality, Alcan Multiplexed Overhead Service and Secondary
cables meet or exceed requirements of ANSI/ICEA S-76-474.
The bare neutral conductor is available as:
1. Stranded All Aluminum (AAC); ASTM – B-231
2. Aluminum Conductor Steel Reinforced (ACSR); ASTM – B-232
3. Aluminum Alloy Conductor 6201 (AAAC); ASTM – B-399
Product Application and Features:
• Designedforuseasaservicedropfromthepowerpoletotheserviceentrance
or as a secondary cable from pole to pole.
• XLPEinsulatedcablesareratedfor90°Coperation.
• Polyethyleneinsulatedcablesareratedfor75°Coperation.
Alcan Aluminum Multiplexed
Overhead Service Cable
This catalog is intended to provide introductory technical data
to aid the correct selection of wire and cable for permanent
installation. Wire and cable products supplied by Alcan
comply with the codes, standards and product specifications
as indicated in this catalog. Weights and measurements are
subject to manufacturing tolerances and product design
changes. Consequently, Alcan does not accept responsibility
for costs incurred by a purchaser as a result of weights and
measurements not conforming exactly to those indicated.

Summary of content (6 pages)