Cut Sheet

ManualsBrandsMultiple Manuals& Cord2/0 AWG THHN/THWN-2 Stranded Aluminum, Red, 1000'

APPLICATION:

THHN / THWN-2 / T90 building wire is intended for general

purpose applications, and is permitted for use in new

construction and rewiring of 600 volt applications. The cable’s

conductors may be used in wet or dry locations at temperatures

not to exceed 90°C. The cable should be installed without the

application of pulling lubricant.

CONDUCTORS:

• Compact bare AA-8000 series aluminum, with Class B

stranded per ASTM

INSULATION:

• Low coefficient of friction (“slick”), abrasion, heat and

moisture resistant Polyvinyl Chloride (PVC)

Aluminum THHN/THWN-2/T90 600V

PVC/Nylon Insulation

#1010-01

ALUMINUM BUILDING WIRE

1-800-945-5542

www.PriorityWire.com

JACKET:

• A clear abrasion, heat, moisture resistant and low coefficient

of friction nylon jacket. Standard stock colors include: black,

red, blue, white, brown, orange, yellow, gray, purple and green

STANDARDS:

• UL 83, UL 1685, cUL

• CSA C22.2 No. 75

• 1/0 & larger are rated for CT use

• NEC & CEC

• NEMA WC-70 / ICEA S-95-658

• ASTM B800, B801, B836

• Federal Specification AA-59544

• VW-1/FT1 Flame Test

• Sunlight resistant / Gas and Oil Resistant II

All values are nominal and subject to correction.

**Ampacities shown are for general use as specified by the National Electrical Code 2017 Edition, Section 310.15 and 240.4(D). Unless the

equipment is marked for use at higher temperatures, the conductor ampacities shall be limited to the follwing per NEC 110.14(C): 60°C - When

terminated to equipment for circuits rated 100 amperes or less marked for 14 through 1 AWG conductors. 75°C - When terminated to equipment for

circuits rated over 100 amperes or marked for conductors larger than 1 AWG. 90°C - THHN dry locations and THWN wet or dry locations for ampacity

adjustment purposes using NEC section 310.15.

10-2021

Part Number

Conductor

Size

Conductor

Diameter

Insulation

Thickness

Jacket

Thickness

Overall

Diameter

Net

Weight

Ampacity**

AWG/KCM inches inches inches inches lbs/kft at 60°C at 75°C at 90°C

8-01AL-THHN 8 0.134 0.030 0.005 0.204 27 35 40 45

6-01AL-THHN 6 0.169 0.030 0.005 0.239 38 40 50 55

4-01AL-THHN 4 0.213 0.040 0.006 0.305 62 55 65 75

2-01AL-THHN 2 0.268 0.040 0.006 0.360 91 75 90 100

1-01AL-THHN 1 0.299 0.050 0.007 0.413 117 85 100 115

1/0-01AL-THHN 1/0 0.335 0.050 0.007 0.450 141 100 120 135

2/0-01AL-THHN 2/0 0.378 0.050 0.007 0.490 172 115 135 150

3/0-01AL-THHN 3/0 0.423 0.050 0.007 0.537 210 130 155 175

4/0-01AL-THHN 4/0 0.476 0.050 0.007 0.589 257 150 180 205

250-01AL-THHN 250 0.520 0.060 0.008 0.656 311 170 205 230

300-01AL-THHN 300 0.571 0.060 0.008 0.706 365 190 230 260

350-01AL-THHN 350 0.614 0.060 0.008 0.752 418 210 250 280

400-01AL-THHN 400 0.657 0.060 0.008 0.795 471 225 270 305

500-01AL-THHN 500 0.736 0.060 0.008 0.872 576 260 310 350

600-01AL-THHN 600 0.816 0.070 0.009 0.971 700 285 340 385

700-01AL-THHN 700 0.877 0.070 0.009 1.035 804 315 375 425

750-01AL-THHN 750 0.909 0.070 0.009 1.066 856 320 385 435

900-01AL-THHN 900 0.999 0.070 0.009 1.139 1013 355 425 480

1000-01AL-THHN 1000 1.059 0.070 0.009 1.218 1117 375 445 500