Cut Sheet

#8
#10
2WS612 58162 6 x 1/2 100 500 5000 0.20# C
2WS634 58164 6 x 3/4 100 500 5000 0.27# C
2WS61 58166 6 x 1 100 500 5000 0.34# C
2WS6114 58168 6 x 1-1/4 100 500 5000 0.42# C
2WS6112 58170 6 x 1-1/2 100 500 5000 0.49# C
2WS62 58172 6 x 2 100 500 5000 0.64# C
2WS812 58150 8 x 1/2 100 500 5000 0.31# C
2WS834 58152 8 x 3/4 100 500 5000 0.41# C
2WS81 58154 8 x 1 100 500 5000 0.51# C
2WS8114 58156 8 x 1-1/4 100 500 5000 0.61# C
2WS8112 58158 8 x 1-1/2 100 500 5000 0.69# C
2WS82 58160 8 x 2 100 500 3000 0.89# C
2WS1012 58200 10 x 1/2 100 500 5000 0.43# C
2WS1034 58202 10 x 3/4 100 500 5000 0.54# C
2WS101 58204 10 x 1 100 500 5000 0.69# C
2WS10114 58206 10 x 1-1/4 100 500 5000 0.80# C
2WS10112 58208 10 x 1-1/2 100 500 3000 0.91# C
2WS102 58210 10 x 2 100 500 3000 1.26# C
2WS1212 58174 12 x 1/2 100 500 5000 0.61# C
2WS1234 58176 12 x 3/4 100 500 5000 0.81# C
2WS121 58178 12 x 1 100 500 5000 0.96# C
2WS12114 58180 12 x 1-1/4 100 500 3000 1.15# C
2WS12112 58182 12 x 1-1/2 100 500 3000 1.30# C
2WS122 58184 12 x 2 100 3000 1.61# C
2WS1412 58186 14 x 1/2 100 500 5000 0.86# C
2WS1434 58188 14 x 3/4 100 500 5000 1.09# C
2WS141 58190 14 x 1 100 500 3000 1.28# C
2WS14114 58192 14 x 1-1/4 100 500 3000 1.57# C
2WS14112 58194 14 x 1-1/2 100 500 3000 1.77# C
2WS142 58196 14 x 2 100 3000 2.21# C
2WST834 58161 8 x 3/4 500 3000 2.24# C
2WST81 58163 8 x 1 500 3000 3.29# C
2WST1034 58165 10 x 3/4 500 3000 3.70# C
2WST101 58167 10 x 1 500 3000 3.60# C
• Sheet Metal Screws
• Pan Head
• Slotted/Phillips
• Zinc Plated Steel
CAT NO UPC SIZE STD SLEEVE MSTR WT/STD UNIT
Pan head combo (slotted/phillips) sheet metal
screws will tap their own mating threads when
driven into preformed holes in metal. Length is
determined from the base of the fastener head.
A20
Pan Head Slotted/Phillips ( 2 Way ) Sheet Metal Screws • Zinc Plated | PC 4000
To Order: Phone [phone] / Fax [phone]
#6
#8
#10
#12
Tu ff
Pack
#14
• Sheet Metal Screws
• Pan Head
•
Phillips
• Stainless Steel
Stainless steel pan head phillips sheet metal screws will
tap their own mating threads when driven into preformed
holes in metal. Length is determined from the base of
the fastener. Stainless steel resists corrosion and is ideal
for applications where chemical resistance is required.
Phillips Pan Head Sheet Metal Screws • Stainless Steel | PC 4010
PHSMSS612 70204 6 x 1/2 100 500 5000 0.20# C
PHSMSS634 70206 6 x 3/4 100 500 5000 0.27# C
PHSMSS61 70208 6 x 1 100 500 5000 0.34# C
PHSMSS6114 70210 6 x 1-1/4 100 500 5000 0.42# C
PHSMSS6112 70212 6 x 1-1/2 100 500 5000 0.49# C
PHSMSS62 70214 6 x 2 100 500 5000 0.64# C
PHSMSS812 70220 8 x 1/2 100 500 5000 0.31# C
PHSMSS834 70222 8 x 3/4 100 500 5000 0.41# C
PHSMSS81 70224 8 x 1 100 500 5000 0.51# C
#6
#8
CAT NO UPC SIZE STD SLEEVE MSTR WT/STD UNIT
SHEET METAL SCREWS