Cut Sheet

Copper-Bonded Ground Rod, Pointed–613400

• 99.9% pure electrolytic copper coating

• Molecular bond to nickel-sealed high strength steel core

• Rods have a high carbon steel core and tip that provide superior strength when driving

• Copper coating will not crack when bent or tear when driven

• Minimum copper coating of 10 mils on rods listed to UL

467

• nVent ERICO name, length, diameter and part number is roll-stamped within 12" (304,8 mm) of chamfered end

• UL logo and control number where applicable stamped on each rod for easy inspection after installation

Part Number 613400

Material Copper-Bonded Steel

Tensile Strength 80,000 psi Min

Ground Rod Diameter, Nominal 3/4"

Ground Rod Diameter, Actual (Ø) 0.681"

Length (L) 10'

Plating Thickness 10 mil

Unit Weight 12.6 lb

UPC Label No

Complies With IEC® EN 62561-2

ANSI®/NEMA® GR1

Certifications CSA 46866

cULus

Qualifoudre

RUS

PAGE 1
Copper-Bonded Ground Rod, Pointed – 613400 • • • • • • • 99.
PAGE 2
Part Number 613400 Standard Packaging Quantity 5 pc UPC 78285630617 EAN-13 8711893093636 For rods to be listed to UL® 467, they must be at least 8' (2.43 m) in length. IEC® EN 62561-2 supercedes EN 50164-2. Additional lengths available. ANSI is a registered trademark of American National Standards Institute. CSA, CSA-US and C-CSA-US are registered trademarks of Canadian Standards Association. IEC is a registered trademark of the International Electrotechnical Commission.