Cut Sheet

Trade Size
Designator
Approx Wt per
100 Ft (30.5M)
Nominal Outside
Diameter
Nominal
Inside Diameter
Quantity in
Primary Bundle
Master Bundle
Quantity Approx. Wt. Volume
U.S. Metric lb. kg. in. mm in mm ft. m ft. m lb. kg. cu. ft. cu. m
1/2 16 10.3 4.7 0.706 17.9 0.622 15.80 200 61 7000 2135.0 721 327.7 28.7 0.81
3/4 21 15.8 7.2 0.922 23.4 0.824 21.00 200 61 5000 1525.0 790 359.1 35.6 1.01
1 27 23.3 10.6 1.163 29.5 1.049 26.60 200 61 3000 915.0 699 317.7 33.7 0.95
1-1/4 35 34.7 15.8 1.510 38.4 1.380 35.05 50 15.2 2000 610.0 694 315.5 35.0 0.99
1-1/2 41 40.2 18.3 1.740 44.2 1.610 40.89 50 15.2 1500 457.5 603 274.1 34.2 0.97
2 53 51.2 23.3 2.197 55.8 2.067 52.50 - - 1200 366.0 614 279.3 46.7 1.32
2-1/2 63 74.6 33.9 2.875 73.0 2.731 69.36 - - 610 186.1 455 206.8 41.5 1.18
3 78 91.1 41.4 3.500 88.9 3.356 85.24 - - 510 155.6 465 211.2 48.9 1.38
3-1/2 91 120.1 54.6 4.000 101.6 3.834 97.38 - - 370 112.9 444 202.0 48.6 1.38
4 103 135.5 61.6 4.500 114.3 4.334 110.08 - - 300 91.5 407 184.8 48.3 1.37
Outside diameter tolerances: +/- .005 in. (.13mm) for trade sizes 1/2” through 2”, +/- .010 in. for trade size 2-1/2”, +/- .015 in. for trade
size 3”, +/- .020 in. for trade sizes 3-1/2” and 4”
Length = 10 ft. with a tolerance of +/- 0.25”.
WEIGHTS AND DIMENSIONS FOR ALUMINUM EMT
Frequently Asked Questions
About Aluminum EMT
• Does Aluminum EMT Meet the Same Code Requirements
As Steel EMT?
YES – Sapa Aluminum EMT meets UL797 and ANSI C80 3.
• Can I Use Galvanized Fittings With Aluminum EMT?
YES – NEC 344.10(A) allows the use of either aluminum or
galvanized  ttings.
• Will Cutting & Threading Aluminum Be Harder Than Steel?
NO – Use your standard cutting tools & dies and you’ll get
fast, easy cuts & threads.
• Any Differences for Bending Aluminum EMT?
NO – Use your standard equipment, but it will be much easier.
• Is It Harder to Pull Cables Through Aluminum EMT?
NO – Independent tests show that aluminum & steel are
comparable.
• How Is Aluminum EMT Less Expensive Than Steel?
The savings come from a combination of extrusion technology
and the weight of the material. Aluminum extrusion can be
much more productive than steel to manufacture. Since
aluminum weighs 1/3 as much as steel, you save money
during shipping and installation.
www.americanconduit.com
American Conduit by Sapa
1512 Industry Drive
Burlington, NC 27216
Phone: [phone]
The American Conduit Advantage
• Part of the largest extrusion company in North America
• The leading producer of aluminum EMT, with sizes
from ½” to 4”
• Over 35 years experience producing extruded
aluminum conduit for the Electrical Industry
• 33 representatives nationwide
• 20 stocking warehouses nationwide
• Nearly 1 million pounds of material in-stock and
ready to ship
• Coast to coast distribution