Cut Sheet

ManualsBrandsMultiple Manuals& Cord25kV 1/C 350 Kcmil AL Primary UD 133% EPR FN

CME Wire and Cable | 495 Horizon Drive NE, Suite 100, Suwanee, Georgia 30024 | www.cmewire.com | 770.623.0001

Primary UD Cable

Primary UD EPR / LLDPE, Concentric Neutral

5 kV – 46 kV

Primary UD Cable

A l u m i n u m

C o n d u C t o r

C o p p e r

C o n d u C t o r

Features

Low tension stripping

compounds.

True Triple extrusion system and

closed handling raw materials

system, to eliminate any contact

with ambient, until extrusion of

insulation and shields.

On request, Sealed conductor

with strand filled compound

passes the production

water penetration tests per

ICEA-T-31-610 at 15 psi for 60

minutes.

When requested, Strand Filled

compound meets compatibility

test requirements in accordance

with ICEA-T-32-610.

On request, Dual sealed cable

(Strand Filled on conductor

+ WSP on Neutral wires)

meets the water penetration

requirements in accordance with

ICEA-T-34-664.

On request, can be UL Listed as

MV90 for use in accordance with

Article 328 of the NEC.

Application

Underground primary residential

and commercial distribution

circuits.

May be used in wet or

dry locations, installed in

underground ducts or

direct burial.

Standards

ICEA S-94-649: Standard for

Concentric Neutral Rated Cables

5 – 46 kV.

AEIC CS8: Specifications for

Extruded Dielectric, Shielded

Power Cable, rated 5 – 46 kV.

Specifications

Maximum operating voltage:

• 5 kV – 46 kV 100% and 133% IL

Maximum conductor operation

temperatures:

Wet and dry locations

• Normal: 105 °C

• Emergency: 140 °C

• Short Circuit: 250 °C

Engineering

Information

1. Conductor: Soft annealed

uncoated copper Class B

compressed or unilay

compressed per ASTM B8

or hard drawn aluminum

Class B compressed or unilay

compressed stranding per

ASTM B231.

On request, strand filled.

Sizes: 8 AWG – 1000 kcmil.

On request, larger sizes available.

2. Conductor Shield: Semi

conducting cross-linked

polyethylene (XLPE).

On request, super clean and

super smooth materials.

3. Insulation: Thermoset

ethylene propylene rubber (EPR).

On request, amorphous EPR.

4. Insulation Shield: Semi

conducting cross-linked

polyethylene (XLPE).

5. Concentric Neutral: Soft

annealed solid copper wires per

ASTM B3, helically applied and

uniformly spaced.

Full or 1/3 Neutral.

On request, alternate neutral

construction and Water

Swellable Powder (WSP).

6. Jacket: Extruded to fill

(Encapsulated) Black sunlight

resistant linear low density

polyethylene (LLDPE), with three

Red Stripes.

On request, semiconducting PE or

Black HDPE.

Configuration Options:

On request, Triplex or Paralleled

configurations.

Summary of content (8 pages)

PAGE 1
Primary UD EPR / LLDPE, Concentric Neutral 5 kV – 46 kV Standards Low tension stripping compounds. ICEA S-94-649: Standard for Concentric Neutral Rated Cables 5 – 46 kV. True Triple extrusion system and closed handling raw materials system, to eliminate any contact with ambient, until extrusion of insulation and shields. On request, Sealed conductor with strand filled compound passes the production water penetration tests per ICEA-T-31-610 at 15 psi for 60 minutes.
PAGE 2
Primary UD EPR / LLDPE, Concentric Neutral, 5 kV – 46 kV Technical Data 5 kV EPR Insulated 1/3 Neutral Size AWG or kcmil Number of Strands Nominal OD Over Number Insulation of in Wires Size AWG Full Neutral Approximate Jacket Outside Approximate Thickness Diameter Net Weight mil in lb/kft Size AWG or kcmil Number of Strands Nominal OD Over Number Insulation of in Wires Approximate Approximate Outside Net Diameter Weight Size Jacket Thickness AWG mil in lb/kft Copper 100% Insulation Level (
PAGE 3
Primary UD EPR / LLDPE, Concentric Neutral, 5 kV – 46 kV Technical Data continued 15 kV EPR Insulated 1/3 Neutral Size AWG or kcmil Number of Strands Nominal OD Over Number Insulation of in Wires Size AWG Full Neutral Approximate Approximate Jacket Outside Net Thickness Diameter Weight mil in lb/kft Size AWG or kcmil Number of Strands Nominal OD Over Number Insulation of in Wires Approximate Approximate Outside Net Diameter Weight Size Jacket Thickness AWG mil in lb/kft Copper 100% Insulat
PAGE 4
Primary UD EPR / LLDPE, Concentric Neutral, 5 kV – 46 kV Technical Data continued 15 kV EPR Insulated 1/3 Neutral Size AWG or kcmil Number of Strands Nominal OD Over Number Insulation of in Wires Size AWG Full Neutral Approximate Jacket Outside Approximate Thickness Diameter Net Weight mil in lb/kft Size AWG or kcmil Number of Strands Nominal OD Over Number Insulation of in Wires Approximate Approximate Outside Net Diameter Weight Size Jacket Thickness AWG mil in lb/kft Copper 133% Insulat
PAGE 5
Primary UD EPR / LLDPE, Concentric Neutral, 5 kV – 46 kV Technical Data continued 25 kV EPR Insulated 1/3 Neutral Size AWG or kcmil Number of Strands Nominal OD Over Number Insulation of in Wires Size AWG Full Neutral Approximate Jacket Outside Approximate Thickness Diameter Net Weight mil in lb/kft Size AWG or kcmil Number of Strands Nominal OD Over Number Insulation of in Wires Approximate Approximate Outside Net Diameter Weight Size Jacket Thickness AWG mil in lb/kft Copper 100% Insulat
PAGE 6
Primary UD EPR / LLDPE, Concentric Neutral, 5 kV – 46 kV Technical Data continued 25 kV EPR Insulated 1/3 Neutral Size AWG or kcmil Number of Strands Nominal OD Over Number Insulation of in Wires Size AWG Full Neutral Approximate Jacket Outside Approximate Thickness Diameter Net Weight mil in lb/kft Size AWG or kcmil Number of Strands Nominal OD Over Number Insulation of in Wires Approximate Approximate Outside Net Diameter Weight Size Jacket Thickness AWG mil in lb/kft Copper 133% Insulat
PAGE 7
Primary UD EPR / LLDPE, Concentric Neutral, 5 kV – 46 kV Technical Data continued 35 kV EPR Insulated 1/3 Neutral Size AWG or kcmil Number of Strands Nominal OD Over Number Insulation of in Wires Size AWG Full Neutral Approximate Jacket Outside Approximate Thickness Diameter Net Weight mil in lb/kft Size AWG or kcmil Number of Strands Nominal OD Over Number Insulation of in Wires Approximate Approximate Outside Net Diameter Weight Size Jacket Thickness AWG mil in lb/kft Copper 100% Insulat
PAGE 8
Primary UD EPR / LLDPE, Concentric Neutral, 5 kV – 46 kV Technical Data continued 35 kV EPR Insulated 1/3 Neutral Size AWG or kcmil Number of Strands Nominal OD Over Number Insulation of in Wires Size AWG Full Neutral Approximate Jacket Outside Approximate Thickness Diameter Net Weight mil in lb/kft Size AWG or kcmil Number of Strands Nominal OD Over Number Insulation of in Wires Approximate Approximate Outside Net Diameter Weight Size Jacket Thickness AWG mil in lb/kft Copper 133% Insulat