Cut Sheet

ManualsBrandsMultiple ManualsConduitEMT Conduit, 3", Steel, 10'

ALLIED E-Z PULL

EMT

E-Z Pull

EMT Specifications

Kwik-Fit, E-Z Pull, Allied Tube & Conduit, AFC Cable Systems, Power-Strut, Cope, and Allied Electrical Group are trademarks or registered trademarks of Tyco and/or its affiliates in the

United States and in other countries. All other brand names, product names, or trademarks belong to their respective owners.

• Allied Tube & Conduit • AFC Cable Systems

• Power-Strut

Metal & Fiberglass Framing • Cope

Cable Tray

www .alliedeg.com

•

Allied Tube & Conduit - Electrical

16100 S. Lathrop Avenue, Harvey, IL 60426

Tel. 800-882-5543 Fax 708-339-0615

Manufactured for Long Life

Allied EMT is precision manufactured from high

grade mild strip steel for exceptional durability and

long-lasting life. Allied EMT is hot galvanized using

Allied’s patented in-line Flo-Coat

process.

This process combines zinc, a conversion coating, and

a clear organic polymer top-coat to form a triple layer of

protection against corrosion and abrasion.

EMI SHIELDING

Allied EMT greatly reduces electromagnetic fields,

effectively shielding computers and sensitive

electronic equipment from the electromagnetic

interference caused by power distribution systems.

FULL CODES & STANDARDS COMPLIANCE

Allied EMT is listed to Underwriters Laboratories Safety

Standard UL 797 and meets ANSI C80.3, which have

been adopted as federal specifications in lieu of WWC

563. EMT is recognized as an equipment grounding

conductor by NEC Section 250-118. Documentation for

compliance with NEC Article 250 is also available in the

GEMI (Grounding and Electro-Magnetic Interference)

analysis software and related research studies found at

the www.alliedeg.com website.

Installation of EMT shall be in accordance with the

National Electrical Code and the UL listing information.

Allied EMT is listed in category FJMX. Master bundles

conform to NEMA Standard RN2.

SPECIFICATION DATA

To specify Allied EMT, include the following: Electrical

Metallic Tubing shall be equal to that manufactured by

Allied Tube & Conduit Corporation. EMT shall be hot

galvanized steel O.D. with an organic corrosion

resistant I.D. coating and shall be produced in

accordance with U.L. Safety Standard #797 and

ANSI C80.3 and shall be listed by a nationally

recognized testing laboratory with follow-up service.

Where Kwik-Fit

EMT is used it shall also meet U.L.

Safety Standard #514-B. Note that these U.L. and

ANSI standards have been adopted by the federal

government and separate military specifications no

longer exist.

U.S. Metric lb. kg. in. mm in. mm ft. m

1/2 16 30 13.6 0.706 17.9 0.042 1.07 7000 2135.0

3/4 21 46 20.9 0.922 23.4 0.049 1.25 5000 1525.0

1 27 67 30.4 1.163 29.5 0.057 1.45 3000 915.0

1-1/4 35 101 45.8 1.510 38.4 0.065 1.65 2000 610.0

1-1/2 41 116 52.6 1.740 44.2 0.065 1.65 1500 457.5

2 53 148 67.1 2.197 55.8 0.065 1.65 1200 366.0

2-1/2 63 216 98.0 2.875 73.0 0.072 1.83 610 186.1

3 78 263 119.3 3.500 88.9 0.072 1.83 510 155.6

3-1/2 91 249 158.3 4.000 101.6 0.083 2.11 370 112.9

4 103 393 178.2 4.500 114.3 0.083 2.11 300 91.5

Outside diameter tolerances

+/- .005 in. (.13mm) for trade sizes 1/2 (16mm) through 2 (53mm);

+/- .010 in. (.25mm) for trade sizes 2-1/2 (63mm);

+/- .015 in. (.38mm) for trade size 3 (78mm);

+/- .020 in. (.51mm) for trade sizes 3-1/2 (91mm) and 4 (103mm).

NOTE: Length = 10 ft. (3.05m) with a tolerance of

.25 in. (6.35 mm)

Weights and Dimensions for Electrical Metallic Tubing

U.S. Metric lb. kg. in. mm in. mm ft. m

2 53 148 67.1 2.197 55.8 0.065 1.65 500 152.4

2-1/2 63 216 98.0 2.875 73.0 0.072 1.83 350 106.8

3 78 263 119.3 3.500 88.9 0.072 1.83 300 91.5

3-1/2 91 349 158.3 4.000 101.6 0.083 2.11 250 76.3

4 103 393 178.2 4.500 114.3 0.083 2.11 250 76.3

Weights and Dimensions for Kwik-Fit EMT

Outside diameter tolerances

+/- .005 in. (.13mm) for trade size 2 (53mm);

+/- .010 in. (.25mm) for trade size 2-1/2 (63mm);

+/- .015 in. (.38mm) for trade size 3 (78mm);

+/- .020 in. (.51mm) for trade sizes 3-1/2 (91mm) and 4 (103mm).

NOTE: Length = 10 ft. (3.05m) with a tolerance of

.25 in. (6.35 mm)

Trade Size

Designator

Approx. Wt. Per

100 Ft. (30.5M)

Nominal Outside

Diameter

Nominal

Wall

Thickness

Quantity In

Master Bundle