Cut Sheet

• UL Listed
• Steel Locknut
• PVC Sealing Ring
• Zinc Plated
Used wherever a liquid tight application
is needed when fastening threaded
conduit to an unthreaded opening in a
box or enclosure.
Sealing Locknuts | PC 5665
LNS50 12330 1/2" 100 1000 1.34# C
LNS75 12331 3/4" 100 1000 2.05# C
LNS100 12332 1" 100 500 2.78# C
LNS125 12333 1-1/4" 50 250 2.08# C
LNS150 12334 1-1/2" 50 250 2.95# C
LNS200 12336 2" 50 100 3.22# C
LNS250 12338 2-1/2" 25 100 3.30# C
LNS300 12340 3" 25 100 3.94# C
LNS350 12342 3-1/2" 25 50 5.00# C
LNS400 12344 4" 25 50 6.06# C
CAT NO UPC SIZE STD MSTR WT/STD UNIT
PB50 10100 1/2" 100 1000 0.49# C
PB75 10105 3/4" 100 1000 0.64# C
PB100 10110 1" 50 500 0.58# C
PB125 10115 1-1/4" 25 250 0.44# C
PB150 10120 1-1/2" 25 250 0.50# C
PB200 10125 2" 25 250 0.74# C
PB250 10130 2-1/2" 25 100 1.32# C
PB300 10135 3" 25 100 1.55# C
PB350 10140 3-1/2" 10 50 0.85# C
PB400 10145 4" 10 20 0.98# C
PB500 10150 5" 10 10 2.93# C
PB600 10155 6" 10 10 3.85# C
• Steel
• Zinc Plated
Locknuts are used to secure conduit by
running or threading conduit into a box
or panel and attaching the locknut and
cinching up until tight.
Locknuts | PC 5660
LN38* 12300 3/8" 100 1000 3.02# C
LN50 12301 1/2" 100 1000 1.34# C
LN75 12302 3/4" 100 1000 2.05# C
LN100 12303 1" 100 500 2.78# C
LN125 12304 1-1/4" 50 250 2.08# C
LN150 12305 1-1/2" 50 250 2.95# C
LN200 12306 2" 50 100 3.22# C
LN250 12307 2-1/2" 25 100 3.30# C
LN300 12308 3" 25 100 3.94# C
LN350 12309 3-1/2" 25 50 5.00# C
LN400 12310 4" 25 50 6.06# C
LN500 12311 5" 10 10 8.95# C
LN600 12312 6" 10 10 9.90# C
* LN38 Square Fixture Locknut
CAT NO UPC SIZE STD MSTR WT/STD UNIT
• UL Listed
• Thermoplastic
• 105° C
• Fits Rigid Conduit
Plastic bushings are threaded onto the
end of conduit and are used to protect
wires coming through the conduit.
C11
UPC Vendor ID Code: 78-1002
Plastic Bushings | PC 5670
See new products at www.lhdottie.com
CAT NO UPC SIZE STD MSTR WT/STD UNIT
FITTINGS