Cut Sheet

ManualsBrandsMultiple ManualsConduit5" Rigid Steel 90 Degree Sweep Elbow, 60" Radius

Galvanized Rigid Conduit (GRC)

• Hot-dip galvanized for excellent corrosion resistance

• High strength ductile steel for long life and easy bending

• Smooth, continuous raceways for fast wire pulling

• Kwik-Release End Cap to protect threads

• True Color

™

GRC special orders available

• Listed to Safety Standard UL 6

• Manufactured in accordance with ANSI C80.1

• Available in sizes 1/2 (16) - 6 (155)

Kwik-Couple Galvanized Rigid Conduit (GRC)

• Similar Beneﬁts to standard GRC Conduit*

• Factory installed Kwik-Couple

™

couplings are available on

GRC conduit

Just line up the ends, spin the coupling

forward onto the next piece and wrench

tighten. It’s that easy!

• No separate couplings to purchase, inventory or install

• Kwik-Release End Cap to protect threads

• True Color

™

Kwik-Couple

GRC special orders available

• Manufactured in accordance with ANSI C80.1

• Available in sizes 2 1/2 (63) - 5 (129)

*Kwik-Couple GRC does not contain a listing for wet locations and is not

approved for Class I Division I locations.

Chart on the following page

Galvanized Rigid Conduit (GRC) and Kwik-Couple

GRC

in mm in mm lb kg ft m

1/2 16 0.840 21.34 0.104 2.64 82 37.2 2500 762.5

3/4 21 1.050 26.67 0.107 2.72 109 49.4 2000 610.0

1 27 1.315 33.40 0.126 3.20 161 73.0 1250 381.3

1 1/4 35 1.660 42.16 0.133 3.38 218 98.9 900 274.5

1 1/2 41 1.900 48.26 0.138 3.51 263 119.3 800 244.0

2 53 2.375 60.33 0.146 3.71 350 158.8 600 183.0

2 1/2 63 2.875 73.03 0.193 4.90 559 253.6 370 112.9

3 78 3.500 88.90 0.205 5.21 727 329.8 300 91.5

3 1/2 91 4.000 101.60 0.215 5.46 880 399.2 250 76.3

4 103 4.500 114.30 0.225 5.72 1030 467.2 200 61.0

5 129 5.563 141.30 0.245 6.22 1520 689.5 150 45.8

6 155 6.625 168.28 0.266 6.76 1785 809.7 100 30.5

Galvanized Rigid Conduit (GRC)

isted to UL 6, manufactured in accordance with ANSI C80.1

Tolerances: Trade Size 1/2 to 1-1/2: ±0.015” (0.38mm); Trade Size 2-6: ±1%

Length equals 10 ft. (3.05m) with a tolerance of +/- .25 in. (6.35mm)

For information only. Not a requirement of the UL standard.

* NEMA RN-3 Standard

Quality, Long Lasting Heavy Duty

Steel Conduit

For Faster Installations Use the

Kwik-Couple GRC Connection

* U.S. Patent Numbers 7,404,582 and 7,726,001.

Trade

Size

Metric

Designator

Approximate

Weight Per

100 Ft. (30.5M)

Outside

Diameter

Nominal Wall

Thickness

Quantity in

Master Bundle*

Kwik-Couple Rigid Elbows

• Also available with pre-installed Kwik-Couple Couplings

• Made to order, contact us for lead times

Project Information

Company Name:

Address:

City:

State & Zip:

Phone:

Project Name:

City:

State:

NOTE: Special orders are non-cancelable, non-returnable and

non-refundable

www.alliedeg.com

Summary of content (8 pages)

PAGE 1
Galvanized Rigid Conduit (GRC) and Kwik-Couple® GRC Galvanized Rigid Conduit (GRC) Quality, Long Lasting Heavy Duty Steel Conduit Kwik-Couple Galvanized Rigid Conduit (GRC) For Faster Installations Use the Kwik-Couple GRC Connection • • • • • • • • • • • • • • • Hot-dip galvanized for excellent corrosion resistance High strength ductile steel for long life and easy bending Smooth, continuous raceways for fast wire pulling Kwik-Release End Cap to protect threads True Color™ GRC special orders availabl
PAGE 2
Galvanized Rigid Conduit (GRC) and Kwik-Couple® GRC FEATURES & SPECIFICATIONS Full Electrical System Protection Manufactured from mild steel, Allied’s Rigid Conduit is highly resistant to damage from impact yet ductile to facilitate bending. The 3/4” taper NPT threads (ANSI B1.20.1) are full cut and hot galvanized after cutting. Color-coded end cap thread protectors keep the threads clean, sharp and also provide instant trade size recognition.
PAGE 3
Galvanized Rigid Conduit (GRC) Couplings & Elbows GRC Nipples & Couplings A = Diam B = Leng Galvanized Rigid Conduit (GRC) Couplings Manufactured to Underwriters Laboratory Safety Standards UL 6 Manufactured in accordance with ANSI C80.1 Trade Size 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 Metric Designator Nominal O.D. (A) 2 in 1.01 1.25 1.53 1.87 2.16 2.65 3.25 3.87 4.50 4.88 6.00 7.
PAGE 4
Galvanized Rigid Conduit (GRC) Elbows Galvanized Rigid Conduit (GRC) 45 Degree Elbows Listed to UL Safety Standard 6 Manufactured in accordance with ANSI C80.
PAGE 5
Galvanized Rigid Conduit (GRC) Elbows Galvanized Rigid Conduit (GRC) Large Radius 90 Degree Elbows (continued) Listed UL Safety Standard 6 Manufactured in accordance with ANSI C80.
PAGE 6
Galvanized Rigid Conduit (GRC) Elbows & Nipples Galvanized Rigid Conduit (GRC) Large Radius 90 Degree Elbows (continued) 45˚ 60˚ Listed to UL Safety Standard 6 Manufactured in accordance with ANSI C80.
PAGE 7
Galvanized Rigid Conduit (GRC) Nipples GRC Nipples & Couplings A = Diameter B = Length Galvanized Rigid Conduit (GRC) Nipples (continued) Listed to UL Safety Standard 6 Manufactured in accordance with ANSI C80.
PAGE 8
Galvanized Rigid Conduit (GRC) Nipples GRC Nipples & Couplings A = Diameter B = Length Galvanized Rigid Conduit (GRC) Nipples (continued) Listed to UL Safety Standard 6 Manufactured in accordance with ANSI C80.