Cut Sheet

NOTE: Special orders are non-cancelable, non-returnable and
non-refundable
www.alliedeg.com
16100 S. Lathrop Ave., Harvey, IL 60426
Phone / 708.339.1610 • Toll-Free / 800.882.5543
Galvanized Rigid Conduit (GRC) Elbows & Nipples
Galvanized Rigid Conduit (GRC) Large Radius 90 Degree Elbows (continued)
Listed to UL Safety Standard 6
Manufactured in accordance with ANSI C80.1
Trade
Size
Metric
Designator
Radius (A) Offset (B)
2
Straight (D)
2
Approximate
Weight Per
100 Pieces
in mm in mm in mm lb kg
5 129 36 914 50 3/4 1289 14 3/4 375 10033 4551.0
5 129 48 1219 65 1/4 1657 17 1/4 438 12833 5821.0
5 129 60 1524 75 7/8 1927 15 7/8 403 14700 6667.9
6 155 36 914 50 3/4 1289 14 3/4 375 13187 5981.6
6 155 48 1219 65 1/4 1657 17 1/4 438 16867 7650.9
6 155 60 1524 75 7/8 1927 15 7/8 403 19320 8763.6
15˚
30˚
22.5˚
45˚ 60˚ 90˚
GRC Elbow - Dimensions
A = Radius
B = Oset
C = Straight
Galvanized Rigid Conduit (GRC) Nipples
Listed to UL Safety Standard 6
Manufactured in accordance with ANSI C80.1
Trade
Size
Metric
Designator
Length (A)
Total Thread
Length (B)
1
Threads
Per Inch
1
Approximate
Weight Per
100 Pieces
Standard
Package
in mm in mm lb kg
1/2 16 (Close) 1 1/8 29 0.78 19.8 14 6 2.7 25
1/2 16 1 1/2 38 0.78 19.8 14 8 3.6 25
1/2 16 2 51 0.78 19.8 14 12 5.4 25
1/2 16 2 1/2 64 0.78 19.8 14 15 6.8 25
1/2 16 3 76 0.78 19.8 14 19 8.6 25
1/2 16 3 1/2 89 0.78 19.8 14 22 10.0 25
1/2 16 4 102 0.78 19.8 14 26 11.8 25
1/2 16 5 127 0.78 19.8 14 33 15.0 25
1/2 16 6 152 0.78 19.8 14 40 18.1 25
1/2 16 8 203 0.78 19.8 14 54 24.5 25
1/2 16 10 254 0.78 19.8
14 68 30.8 25
1/2 16 12 305 0.78 19.8 14 82 37. 2 25
3/4 21 (Close) 1 3/8 35 0.79 20.1 14 9 4.1 25
3/4 21 1 1/2 38 0.79 20.1 14 10 4.5 25
3/4 21 2 51 0.79 20.1 14 14 6.4 25
3/4 21 2 1/2 64 0.79 20.1 14 19 8.6 25
3/4 21 3 76 0.79 20.1 14 24 10.9 25
3/4 21 3 1/2 89 0.79 20.1 14 28 12.7 25
3/4 21 4 102 0.79 20.1 14 34 15.4 25
3/4 21 5 127 0.79 20.1 14 43 19.5 25
3/4 21 6 152 0.79 20.1 14 52 23.6 25
3/4 21 8 203 0.79 20.1 14 73 33.1 25
3/4 21 10 254 0.79 20.1 14 89 40.4 25
3/4 21 12 305 0.79 20.1 14 109 49.4 25
1
Mimimum requirement as per UL Standard Chart continued on the next page
A tolerance of minus one thread applies to Total length of Thread
2
For information only, not a requirement as per UL Standard
Shipped in palletized cartons or bulk.
Also available in the following Degrees (60°, 45°, 30°, 22-1/2°, 15° & 11-1/4°)
GRC Nipples & Couplings
A = Diameter
B = Length
B
A
B
B
A
D
D
KWIK-COUPLE AVAILABLE
Trade Size 2-1/2 to 5 by special order