Cut Sheet

F. SURFACE MARKING:
Two sides of the cable shall be printed using an ink of a contrasting color and
with the following information:
“TelcoFlex
®
III / KS24194™L3 NON
FT4 (UL) or AWM 3578 60°C WET VW
AWM I B 105° 600V. FT4 (YEAR) M_____*”
Add “FOR CT USE” before “(UL)” on Sizes 1/0 AWG and larger.
Sequential footage markings shall be applied at 2 foot intervals on one
the cable.
G. TESTING:
Physical and electrical tests in accordance with the requirements of UL
Standard 44, Subject 509 and 758, and CSA Standard C22.2 No. 210.2 M90 as
AWM.
H. LABELS:
UL and CSA tags and labels shall be applied to all packages.
I. LENGTHS:
All put-
ups one length only unless agreed to otherwise. Maximum lengths per
size will be advised.
J. PACKAGING:
The ends of the cable shall be capped or taped to prevent the entran
moisture during shipment or storage.
Two sides of the cable shall be printed using an ink of a contrasting color and
with the following information:
III / KS24194™L3 NON
-
HAL (SIZE) AWG (or KCMIL) 600 V.
FT4 (UL) or AWM 3578 60°C WET VW
-1 E18321 --- A.I.W. CORP.
---
AWM I B 105° 600V. FT4 (YEAR) M_____*”
Add “FOR CT USE” before “(UL)” on Sizes 1/0 AWG and larger.
Sequential footage markings shall be applied at 2 foot intervals on one
Physical and electrical tests in accordance with the requirements of UL
Standard 44, Subject 509 and 758, and CSA Standard C22.2 No. 210.2 M90 as
UL and CSA tags and labels shall be applied to all packages.
ups one length only unless agreed to otherwise. Maximum lengths per
The ends of the cable shall be capped or taped to prevent the entran
moisture during shipment or storage.
Two sides of the cable shall be printed using an ink of a contrasting color and
HAL (SIZE) AWG (or KCMIL) 600 V.
RHH/ST1
---
LL 8825 CSA
Sequential footage markings shall be applied at 2 foot intervals on one
side of
Physical and electrical tests in accordance with the requirements of UL
Standard 44, Subject 509 and 758, and CSA Standard C22.2 No. 210.2 M90 as
ups one length only unless agreed to otherwise. Maximum lengths per
The ends of the cable shall be capped or taped to prevent the entran
ce of