Cut Sheet

ManualsBrandsMultiple Manuals& Cord5/8kV 1/C 750 Kcmil CU MV-105 133% EPR

CME Wire and Cable | 495 Horizon Drive NE, Suite 100, Suwanee, Georgia 30024 | www.cmewire.com | 770.623.0001

Medium Voltage Cables - Single Conductor

A l u m i n u m

C o n d u C t o r

5 kV – 35 kV, Copper Tape Shielded

MV-105 EPR Insulated, PVC Jacketed

Features

UL listed as MV-105.

Rated as Sunlight Resistance

for CT use, 1/0 AWG and larger.

Jacket is rated as Oil Resistance I.

True Triple extrusion system and

closed handling raw materials

system, to eliminate any contact

with ambient, until extrusion

process ends.

Application

Primary power and distribution

circuits in industrial and

commercial installations,

power circuits in generating

plants where line to ground

fault current are within shield

capabilities.

May be used in wet or dry

locations, installed in cable

trays, raceways, duct, and

open air, aerially or directly

buried as permitted by NEC.

Standards

UL 1072

Medium Voltage Power Cables.

ICEA S-93-639/NEMA WC74

5 kV – 46 kV Shielded Power

Cables.

ICEA S-97-682

Standard for Utility Shielded

Power Cables Rated 5 kV – 46 kV.

AEIC CS8

Specification for Extruded

Dielectric, Shielded Power Cables

Rated 5 kV – 46 kV.

Specifications

Maximum operating voltage:

• 5 kV to 35 kV 100% and 133% IL

Maximum conductor operation

temperatures:

Wet and dry locations

• Normal: 105 °C

• Emergency: 140 °C

• Short Circuit: 250 °C

Engineering

Information

1. Conductor: Soft annealed

uncoated copper compacted

Class B per ASTM B496 or hard

drawn Aluminum-1350 compacted

Class B per ASTM B400 or

annealed AA-8000 Aluminum

compacted Class B per ASTM B80.

On request, strand filled or

compressed strand or tinned

copper conductor.

Sizes: 8 AWG (6 AWG Aluminum)

up to 1000 kcmil.

On request, larger conductor

sizes available.

2. Conductor Shield: Semi

conducting cross-linked

polyethylene (XLPE).

3. Insulation: Thermoset ethylene

propylene rubber (EPR).

On request, Amorphous EPR.

4. Insulation Shield: Semi

conducting cross-linked

polyethylene (XLPE).

5. Metallic Shield: Soft annealed

uncoated copper tape, 5 mil thick,

25% minimum overlap.

Optional: Tinned copper tape.

6. Jacket: Black sunlight

resistance and flame retardant

polyvinyl chloride (PVC) jacket.

Configuration Options:

On request, Triplex or Paralleled

configurations.

Summary of content (4 pages)

PAGE 1
MV-105 EPR Insulated, PVC Jacketed 5 kV – 35 kV, Copper Tape Shielded Features ICEA S-97-682 UL listed as MV-105. Standard for Utility Shielded Power Cables Rated 5 kV – 46 kV. Jacket is rated as Oil Resistance I. True Triple extrusion system and closed handling raw materials system, to eliminate any contact with ambient, until extrusion process ends.
PAGE 2
Medium Voltage / MV-105 EPR Insulated, PVC Jacketed, 5 kV – 35 kV, Copper Tape Shielded Technical Data 5 kV EPR Insulated 100% and 133% Insulation Levels (90 mil) Size AWG or kcmil Number of Strands Approximate Net Weight Conductor Nominal OD Insulation Thickness Jacket Thickness Approximate Outside Diameter Copper Aluminum in mil mil in lb/kft lb/kft 6 7 0.17 0.39 60 0.60 260 204 4 7 0.21 0.43 60 0.65 328 238 2 7 0.27 0.49 60 0.70 430 287 1 19 0.30 0.52 60 0.
PAGE 3
Medium Voltage / MV-105 EPR Insulated, PVC Jacketed, 5 kV – 35 kV, Copper Tape Shielded Technical Data continued 15 kV EPR Insulated 100% Insulation Level (175 mil) Size AWG or kcmil Number of Strands Nominal Conductor Diameter Diameter Over Insulation Jacket Thickness Approximate Outside Diameter 133% Insulation Level (220 mil) Approximate Net Weight Copper Nominal Diameter Aluminum Over Insulation lb/kft Jacket Thickness Approximate Net Weight Approximate Outside Diameter Copper Aluminum in
PAGE 4
Medium Voltage / MV-105 EPR Insulated, PVC Jacketed, 5 kV – 35 kV, Copper Tape Shielded Technical Data continued 35 kV EPR Insulated 100% Insulation Level (345 mil) Nominal Conductor Diameter Diameter Over Insulation Approximate Outside Diameter 133% Insulation Level (420 mil) Approximate Net Weight Nominal Diameter Aluminum Over Insulation Approximate Outside Diameter Approximate Net Weight Size AWG or kcmil Number of Strands in in mil in in mil in 1/0 19 0.34 1.08 80 1.