Cut Sheet
TMC63212 11646 6/32 x 1/2 100 500 5000 0.20# C
TMC63234
11647 6/32 x 3/4 100 500 5000 0.26# C
TMC6321 11648 6/32 x 1 100 500 5000 0.37# C
TMC632114 11649 6/32 x 1-1/4 100 500 5000 0.40# C
TMC632112 11650 6/32 x 1-1/2 100 500 5000 0.49# C
TMC632 11651 6/32 x 2 100 500 5000 0.62# C
CAT NO
UPC SIZE STD SLEEVE MSTR WT/STD UNIT
• Machine Screws
• Round Head
• Square/Slotted
• Zinc Plated Steel
CAT NO UPC SIZE STD SLEEVE MSTR WT/STD UNIT
Round head machine screws project
above the material surface. This head
style is used when clearance is not an
important factor. Length is determined
from the base of the fastener head.
A3
MACHINE SCREWS
UPC Vendor ID Code: 78-1002
Round Head Square/Slotted Machine Screws • Zinc Plated | PC 4020
See new products at www.lhdottie.com
6/32
RMDS63238 65480 6/32 x 3/8 100 500 5000 0.19# C
RMDS63212 65484 6/32 x 1/2 100 500 5000 0.26# C
RMDS63234 65488 6/32 x 3/4 100 500 5000 0.26# C
RMDS6321 65492 6/32 x 1 100 500 5000 0.33# C
RMDS632114 65496 6/32 x 1-1/4 100 500 5000 0.40# C
RMDS632112 65501 6/32 x 1-1/2 100 500 5000 0.49# C
RMDS6322 65505 6/32 x 2 100 500 5000 0.29# C
RMDS83238 65512 8/32 x 3/8 100 500 5000 0.23# C
RMDS83212 65511 8/32 x 1/2 100 500 5000 0.40# C
RMDS83234 65515 8/32 x 3/4 100 500 5000 0.40# C
RMDS8321 65519 8/32 x 1 100 500 5000 0.50# C
RMDS832114 65523 8/32 x 1-1/4 100 500 5000 0.72# C
RMDS832112 65430 8/32 x 1-1/2 100 500 3000 0.72# C
RMDS8322 65520 8/32 x 2 100 500 3000 0.93# C
RMDS102412 65434 10/24 x 1/2 100 500 5000 0.49# C
RMDS102434 65438 10/24 x 3/4 100 500 5000 0.62# C
RMDS10241 65442 10/24 x 1 100 500 5000 0.75# C
RMDS1024114 65446 10/24 x 1-1/4 100 500 5000 0.95# C
RMDS1024112 65450 10/24 x 1-1/2 100 500 3000 1.03# C
RMDS10242 65454 10/24 x 2 100 500 3000 1.32# C
RMDS103238 65458 10/32 x 3/8 100 500 5000 0.32# C
RMDS103212 65457 10/32 x 1/2 100 500 5000 0.49# C
RMDS103234 65464 10/32 x 3/4 100 500 5000 0.62# C
RMDS10321 65468 10/32 x 1 100 500 5000 0.75# C
RMDS1032114 65469 10/32 x 1-1/4 100 500 3000 0.85# C
RMDS1032112 65471 10/32 x 1-1/2 100 500 3000 0.94# C
RMDS10322 65467 10/32 x 2 100 500 3000 1.32# C
RMDS1412 65400 1/4 x 1/2 100 500 5000 0.97# C
RMDS1434 65404 1/4 x 3/4 100 500 5000 1.19# C
RMDS141 65408 1/4 x 1 100 500 3000 1.45# C
RMDS14114 65412 1/4 x 1-1/4 100 500 3000 1.69# C
RMDS14112 65416 1/4 x 1-1/2 100 500 3000 1.97# C
RMDS142 65420 1/4 x 2 100 1500 2.42# C
RMDS14212 65424 1/4 x 2-1/2 100 1500 2.73# C
8/32
10/24
10/32
1/4
-20
Truss Head Slotted/Phillips (Combo) Machine Screws • Zinc Plated
| PC 4005
• Machine Screws
• Truss Head
• Slotted/Phillips
• Zinc Plated Steel
Truss Head Machine Screws are needed
when installing wiring devices behind wall
plates. The perfect scr
ew when a low pro-
file fastener is needed.
6/32