User Manual

Seite 15
Parts List - Pilatus PC-6 Turbo Porter # 264290 / # 264291:
Part No. Qty Description Material Dimensions
1 1 Pilatus PC-6 building instructions Paper DIN A4
2 1 Model complaint processing form Paper DIN A4
3 1 Fuselage (factory-assembled, with motor controller, ELE and RUD servos),
Elapor foam Ready made
4 1 Battery access hatch Elapor foam Ready made
5 1 Servo access hatch Elapor foam Ready made
6 1 Aerial strake Plastic Ready made
7 1 Main undercarriage (factory-assembled) Plastic / metal Ready made
8 2 Main undercarriage compression spring Metal 7 Ø x 23 mm
9 2 Upper spring strut Plastic Ready made
10 2 Mushroom-head screw Metal M 3 x 20 mm
11 1 Tailplane (tailplane and elevator, factory-assembled), Elapor foam Ready made
12 1 Fin and rudder (glued to fuselage) Elapor foam Ready made
13 1 Left wing (factory-assembled, with AIL servo), Elapor foam Ready made
14 1 Right wing (factory-assembled, with AIL servo), Elapor foam Ready made
15 1 Wing joiner tube CFRP tube 10 Ø, length 395 mm
16 1 Propeller, 11 x 5.5“ Plastic 12 x 8“, 3-blade
17 1 Spinner backplate Plastic 50 mm Ø
18 1 Spinner cone Plastic 50 mm Ø
19 2 Spinner cone retaining screw Metal 2.3 x 8 mm
20 1 Taper collet Aluminium 4 mm I.D., 6 mm O.D.
21 1 Taper collet adapter Aluminium Ready made
22 1 Washer Steel 6.2 mm I.D.
23 1 Nut Steel M6
24 1 Cross-point mushroom-head screw for tailplane, Metal M4 x 45 mm
25 2 Wire body clip Metal Ready made
26 2 Hook-and-loop tape, hook Plastic Strip, 20 x 140
27 2 Hook-and-loop tape, loop Plastic Strip,20 x 140
28 1 Flame sticker, r + l Plastic ! lm Ready made
29 1 Mini-catalogue Paper DIN A5