vorgesehen für den MULTIPLEX Brushless-Antrieb # 33 2638 BK / KIT ParkMaster D F GB I E # 21 4231 Bauanleitung 3 ... 8 Notice de construction 9 ... 14 Building instructions 15 ... 25 Instruzioni di montaggio 26 ... 31 Instrucciones de montaje 32 ... 37 Ersatzteile Replacement parts 38 ... 39 Pièces de rechanges Parti di ricambio Repuestos © Copyright by MULTIPLEX 2008 Version 1.
# 21 4231 Examine your kit carefully! MULTIPLEX model kits are subject to constant quality checks throughout the production process, and we sincerely hope that you are completely satisfied with the contents of your kit. However, we do ask you to check all the parts before you start construction (referring to the Parts List), as we cannot exchange components which you have already worked on. If you find any part is not acceptable, we will readily correct or exchange it once we have examined it.
1. Before assembling the model Check the contents of your kit before you start working on it. You will find Figs. 1 + 2 and the Parts List helpful here. Note: the GRP spars and longerons 40 - 43 are supplied in the kit as one full-length strip 14, and have to be cut to the correct length. Please cut them as follows: 40 41 42 43 2 2 2 2 x x x x L.H. and R.H. fuselage longerons L.H. and R.H. motor mount supports top and bottom wing spars top and bottom tailplane spars 1.3 Ø x 745 mm 1.3 Ø x 120 mm 1.
Attach the rudder 10 to the fin using the hinges 22. Fig. 30 13. Connecting the servos to the elevator and rudder If you are using servos other than those recommended, you may need to use different linkage holes - adjust as necessary. Connect the pre-formed end of the rudder pushrod to the outermost hole in the servo output arm. The swivel connector should be mounted in the third hole from the outside of the horn in the rudder 10.
yourself or others. Bear in mind that even the best RC system in the world is subject to outside interference. No matter how many years of accident-free flying you have under your belt, you have no idea what will happen in the next minute. We - the MULTIPLEX team - hope you have many hours of pleasure building and flying your new model. MULTIPLEX Modellsport GmbH & Co. KG Product development and maintenance Klaus Michler ParkMaster 3D Part No. No.
The basics of flying - using a model aircraft as an example Any aircraft - full-size or model - can be controlled around three primary axes: the vertical (yaw) axis, the lateral (pitch) axis and the longitudinal (roll) axis. Operating the elevator produces a change in the model’s flight attitude around the lateral axis (nose up or down).
9 10 3 8 7 5 6 11 4 12 Abb. 1 29 30 31 37 28 21 35 36 13 38 20 23 26 25 24 34 27 32 33 39 22 14 Abb.
26 25 43 23 24 27 9 9 Abb. 4 Abb. 3 27 24 23 25 26 10 10 Abb. 6 Abb. 5 27 25 6 23 24 26 6 Abb. 8 Abb. 7 3 3 41 35 41 36 Abb. 9 20 Abb.
5 40 3 40 4 Abb. Abb. 12 12 Abb. 11 4 39 24 mm 3 13 37 13 37 39 39 Abb. 13 Abb. 14 13 11 39 38 39 Abb. 16 Abb. 15 11 5 4 Abb. 17 Abb.
42 42 4 5 4 5 Abb. 19 Abb. 20 Abb. 21 Abb. 22 5 mm 5 4 42 3 4 4x22 5 6 6 4 Abb. 24 Abb. 23 54 1-1,5 mm 1-1,5 mm 5 4x22 7 Abb. 25 22 Abb.
! ! 29 3te/3rd Abb. 27 Abb. 28 9 8 8 10 9 3 4x22 Abb. 29 Abb. 30 Antriebssatz / Powerset # 33 2638 2x34 4x33 32 30 31 Abb. 32 Abb. 31 2x Nano Karbonite Akku Motor ESC 110 120 mm RX 6 Abb. 33 2x Nano Karbonite Abb.
Ersatzteile Replacement parts Pièces de rechanges Parti di ricambio Repuestos # 22 4132 Rumpf mit Fahrwerksverkleidungen Fuselage and undercarriage fairings Fuselage avec habillage de roue Fusoliera con carenature carrello Fuselaje con revestimientos del tren de aterrizaje # 22 4133 Tragflächen Wing panels Aile principale Semiali Alas # 22 4134 Leitwerkssatz Tail set Kit de stabilisateurs Piani di coda Kit de empenajes # 22 4135 Kleinteile Tail set Petites pièces Minuteria Piezas pequeñas 38 (bitt
Ersatzteile Replacement parts Pièces de rechanges Parti di ricambio Repuestos (bitte bei Ihrem Fachhändler bestellen) (please order from your model shop) (S.V.P.
MULTIPLEX Modellsport GmbH & Co.KG Westliche Gewerbestrasse D-75015 Bretten Gölshausen www.multiplex-rc.
