OPERATION AND PARTS MANUAL STREET PRO 1 SERIES MODEL SP113H18 (HONDA GX390 GASOLINE ENGINE) MODEL SP15E16 (5 HP ELECTRIC MOTOR) CONCRETE/ASPHALT SAW Revision #6 (06/09/08) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
MQ STREET PRO 1 SAW — PROPOSITION 65 WARNING Engine exhaust and some of its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Some examples of these chemicals are: Leadfromlead-basedpaints. Crystallinesilicafrombricks. Cementandothermasonryproducts. Arsenicandchromiumfromchemically treatedlumber.
MQ STREET PRO 1 SAW — SILICOSIS/RESPIRATORY WARNINGS WARNING WARNING SILICOSIS WARNING RESPIRATORY HAZARDS Grinding/cutting/drilling of masonry, concrete, metal and other materials with silica in their composition may give off dust or mists containing crystalline silica. Silica is a basic component of sand, quartz, brick clay, granite and numerous other minerals and rocks.
MQ STREET PRO 1 SAW — TABLE OF CONTENTS Proposition 65 Warning ............................................. 2 Silicosis/Respiratory Warnings .................................. 3 Table Of Contents ..................................................... 4 Parts Ordering Procedures ....................................... 5 Safety Message Alert Symbols .............................. 6-7 Rules For Safe Operation .................................... 8-10 Specifications (Saw) .......................................
www.multiquip.com MQ STREET PRO 1 SAW — PARTS ORDERING PROCEDURES Ordering parts has never been easier! Choose from three easy options: Effective: January 1st, 2006 Best Deal! Order via Internet (Dealers Only): If you have an MQ Account, to obtain a Username and Password, E-mail us at: parts@multiquip.com.
MQ STREET PRO 1 SAW — SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others. NOTE This Owner's Manual has been developed to provide complete instructions for the safe and efficient operation of the MULTIQUIP SP 1.
MQ STREET PRO 1 SAW — SAFETY MESSAGE ALERT SYMBOLS Accidental Starting Respiratory Hazard ALWAYS place the engine ON/OFF switch in the OFF position, when the saw is not in use. ALWAYS wear approved respiratory protection. Over Speed Conditions Sight and Hearing hazard NEVER tamper with the factory settings of the engine governor or settings. Personal injury and damage to the engine or equipment can result if operating in speed ranges above maximum allowable.
MQ STREET PRO 1 SAW — RULES FOR SAFE OPERATION RULES FOR SAFE OPERATION Gasoline Powered Saws CAUTION: ■ NEVER touch the hot exhaust manifold, muffler or cylinder. Allow these parts to cool before servicing the saw. Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the SP 1.
MQ STREET PRO 1 SAW — RULES FOR SAFE OPERATION Electric Saws ■ ALWAYS connect the motor to a power source in compliance with all local electrical codes. This must be performed by a qualified electrician. After this connection is made, it will be necessary to check the rotation of the motor shaft. The shaft rotation should be counter-clockwise when viewing the motor from the shaft extension end. If the rotation of the shaft is incorrect make necessary changes for the correct shaft rotation.
MQ STREET PRO 1 SAW — RULES FOR SAFE OPERATION Saw Transportation Safety Machine Operation And Safety Decals ■ Use appropriate lifting equipment to ensure the safe movement of the saw. The SP 1 is equipped with a number of operation and safety decals. Should any of these decals become unreadable, replacements can be obtained from your dealer. ■ DO NOT use the handle bars and/or front pointer as lifting points. ■ NEVER attempt to tow the untrailered saw behind a vehicle.
MQ STREET PRO 1 SAW — SPECIFICATIONS (SAW) C B G A F E Side View D Front View Figure 2. SP 1 Dimensions Table 1. SP 1 Specifications REFERENCE LETTER A B C D E F G DESCRIPTION Max Width Rear Wheel Base Front Wheel Base Handle Bar Width DIMENSION (cm) 37.0 In. (94 cm) 32.0 In. (80 cm) 54.5 In. (138 cm) 21.5 In. (55 cm) 17.0 In. (40 cm) 10.0 In. (25.4 cm) 21.5 In. (55 cm) SP 1, 13 HP HONDA ENGINE WEIGHT (KG) 214 Lb. (97.0 K.
MQ STREET PRO 1 SAW — SPECIFICATIONS (ENGINE) Table 2. Specifications (Engine) Model HONDA GX390K1QWT2/GX390U1QWT2 Type Air-cooled 4 stroke, Single Cylinder, OHV, Gasoline Engine Bore X Stroke 3.5 in. X 2.5 in. (88 mm x 64 mm) Displacement 23.7 cu-in. (389 cc) Max Output 13.0 H.P./3600 R.P.M. Engine Fuel Tank Capacity Fuel Lube Oil Capacity Approx. 1.72 U.S. Gallons (6.5 Liters) Unleaded Automobile Gasoline 86 Octane or higher 1.16 US qt (1.
MQ STREET PRO 1 SAW — GENERAL INFORMATION General Information The MQ Whiteman SP1 series walk-behind saws are designed for wet or dry cutting of concrete or asphalt utilizing Diamond Blades. These saws have been engineered for general and industrial flat sawing applications.The reinforced steel box frame design adds strength necessary to reduce vibrations while cutting. Minimizing vibrations enhances the performance of the blade and extends the life of the saw.
MQ STREET PRO 1 SAW — CONTROLS & COMPONENTS CONTROLS & COMPONENTS 8. Figures 3 shows the location of the basic controls or components for the SP 1. Listed below is a brief explanation of each control or component. (Gasoline-powered unit shown) Cutting Blade – Use appropriate type blades for cutting concrete or asphalt. 9. Blade Guard – Covers saw blade and flips up to allow blade to be changed. 10. Belt Tension Adjuster – Adjusts belt tension. 1.
MQ STREET PRO 1 SAW — BASIC ENGINE BASIC ENGINE Figure 4. Engine Controls and Components Initial Servicing 6. The engine (Figure 4) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers engine manual for instructions & details of operation and servicing. Choke Lever – Used in the starting of a cold engine, or in cold weather conditions. The choke enriches the fuel mixture. 7.
MQ STREET PRO 1 SAW — PREPARATION/PRE-INSPECTION PREPARATION / PRE-INSPECTION WARNING 1. Read and fully understand this manual, the safety intructions in particular, and the engine manufacturer's manual supplied with the saw. ALWAYS use a grounded (3-wire) extension cord and MAKE CERTAIN that the motor is connected to a properly grounded electric circuit to protect the operator from possible electric shock. 2. Select the correct blade for each application.
MQ STREET PRO 1 SAW — PREPARATION/PRE-INSPECTION 3. Insert and remove the dipstick without screwing it into the filler neck. Check the oil level shown on the dipstick. 4. If the oil level is low (Figure 7), fill to the edge of the oil filler hole with the recommended oil type (Table 4). Guards And Covers WARNING NEVER operate the saw without blade guards and covers in place. DO NOT operate with the front of the blade guard raised. The blade exposure cannot exceed 180 degrees during operation.
MQ STREET PRO 1 SAW — PREPARATION/PRE-INSPECTION V-belt Alignment and Tensioning This saw is equipped with a premium V-belt that has been aligned and tensioned by factory personnel. The V-belt must be aligned and tensioned for proper operation of the saw. Use the following procedure to check the alignment of V-belt: 1. Remove the bolts that secure the V-belt cover (Figure 9) to the saw frame. Figure 10. Pulley Alignment 3. Check V-belt tension by using a tension meter (3.0 lbs.
MQ STREET PRO 1 SAW— BLADES BLADES Saw blades, or cutting disks, are available in either an abrasive design or as diamond blades. Either blade will work on the SP 1, however, diamond blades are recommended. Ask your dealer about your specific cutting application. SAW BLADE INSPECTION WARNING Failure to thoroughly inspect the diamond blade (Figure 11) for operational safety could result in damage to the blades or the saw and may cause injury to the user or others in the operating area. 1.
MQ STREET PRO 1 SAW— BLADE PLACEMENT BLADE PLACEMENT WARNING WARNING Failure to thoroughly inspect the diamond blade for operational safety could result in damage to the blades or the saw and may cause injury to the user or others in the operating area. 1. Blade Guard - Pivot the blade guard front cover all the way back. The guard tension spring will keep the front cover in position. 2.
MQ STREET PRO 1 SAW — INITIAL START-UP INITIAL START-UP CAUTION 3. Place the Engine ON/OFF switch (Figure 13) in the "ON" position. DO NOT attempt to operate the saw until the Safety, General Information and Inspection sections of this manual have been read and thoroughly understood. Depending on engine manufacturer, operating steps may vary. See engine manufactures operating manual. CAUTION Figure 13.
MQ STREET PRO 1 SAW — INITIAL START-UP/OPERATION 5. Rotate the throttle lever (Figure 15) halfway between fast and slow for starting. All sawing is done at full throttle. The engine governor speed is factory set to ensure optimum blade operating speeds. 8. Before the saw is placed into operation, run the engine for several minutes. Check for fuel leaks, and noises that would associate with a loose guards and/or covers. OPERATION 1. Start the engine.
MQ STREET PRO 1 SAW — MAINTENANCE MAINTENANCE 3. Adjust the front pointer wheel so it just touches the side of the straight-edge or level. See the engine manual supplied with your machine for appropriate engine maintenance schedule and troubleshooting guide for problems. NOTE 4. Remove the straight-edge or level. 5. Position the front pointer and blade directly over the chalk line. 6. Start the saw and lower the blade onto the chalk line. CAUTION! ALWAYS allow the engine to cool before servicing.
MQ STREET PRO 1 SAW — MAINTENANCE NOTE Dispose of used oil properly. DO NOT pour used oil on the ground, down a drain, or throw in the trash. Used oil can generally be taken to your local recycling center or service station for reclamation. 4. Make sure the engine is in a level position and fill to the outer edge of the oil filler hole with the recommended oil. (See Table 4.) Engine oil capacity is 1.16 US quart (1.1 liter). 5. Screw in the filler cap/dipstick securely.
MQ STREET PRO 1 SAW — TROUBLESHOOTING (SAW) TABLE 5. BLADE TROUBLESHOOTING SYMPTOM Blade slows or stops cutting. Blade does not cut straight and/or true. Blade discoloring, crackling and/or wearing excessively. POSSIBLE PROBLEM SOLUTION Blade too hard for the material being cut? Consult Dealer or Multiquip for correct blade. Try cutting very soft material (sandstone, silica brick, cinder block) to "Redress" the blade. Engine torque diminished because of loose V-belt? Tighten and/or replace V-Belts.
MQ STREET PRO 1 SAW — TROUBLESHOOTING (ENGINE) TABLE 6. TROUBLESHOOTING (ENGINE) SYMPTOM Difficult to star t, "fuel is available, but no SPARK at spark plug". Difficult to star t, "fuel is available, and SPARK is present at the spark plug". Difficult to star t, "fuel is available, spark is present and compression is normal". Difficult to star t, "fuel is available, spark is present and compression is low". POSSIBLE CAUSE SOLUTION Spark plug bridging? Check gap, insulation or replace spark plug.
MQ STREET PRO 1 SAW — TROUBLESHOOTING (ENGINE) TABLE 6. TROUBLESHOOTING (ENGINE, CONTINUED) SYMPTOM POSSIBLE CAUSE Air cleaner not clean? SOLUTION Clean or replace air cleaner. Check float adjustment. "Weak in power" compression is proper and does not misfire. Improper fuel level in carburetor? Rebuild carburetor. Defective spark plug? Clean or replace spark plug. Improper spark plug gap? Set to proper gap. Water in fuel system? Flush fuel system and replace with correct type fuel.
MQ STREET PRO 1 SAW — SUGGESTED SPARE PARTS The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availibility of the parts listed. * * Numbers Used - Item quantity can be indicated by a number, a blank entry, or A/R.
MQ STREET PRO 1 SAW — SUGGESTED SPARE PARTS SUGGESTED SPARE PARTS MQ STREET PRO 1 CONCRETE/ASPHALT SAW 1 TO 3 UNITS WITH HONDA 13 HP GX390K1QWT2/GX390U1QWT2 ENGINES AND 5HP ELECTRIC MOTOR. 1 to 3 Units Qty. ......P/N ........................... Description 3 20478 ................... HAND GRIP 4 2621 ..................... GREASE ZERK, SPINDLE BEARING 4 1162 A .................. CAP, GREASE ZERK 3 13249 ................... BELT (3VX315) 13HP HONDA 3 16779-006 ............
MQ STREET PRO 1 SAW — DECALS DECALS WARNING TO GUARD AGAINST PERSONAL INJURY, OBSERVE THE FOLLOWING: 1 DO NOT REMOVE THIS TAG! WARNING TO GUARD AGAINST PERSONAL INJURY, OBSERVE THE FOLLOWING: DO NOT REMOVE THIS TAG! P/N 25215-001 (ELECTRIC MODEL ONLY) 5 “HOT” 4 C P/N 25783 P/N 25782 Engine exhaust and some of its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth d
MQ STREET PRO 1 SAW — DECALS DECALS NO. 1 2 3 4 5 6 7 8 9 10 10 11 12 13 PART NO. 25215-001 20525 13118 25782 25783 11247 22122-001 25250-001 25491 25678 23330-001 25249-001 11246 PART NAME QTY. REMARKS DECAL, WARNING .......................... 1 .......... ELECTRIC MODEL ONLY DECAL, PROP 65 WARNING 1 DECAL, POWDER COATED 1 DECAL, MQ DIAMONDBACK 3 DECAL, SP 1 3 DECAL, ISO SAFETY GEAR 1 DECAL, WARNING 1 DECAL, WARNING FEET 1 SERIAL NUMBER PLATE ............... 1 .......... CONTACT PARTS DEPT.
MQ STREET PRO 1 SAW — ENGINE, BELTS AND PULLEYS ENGINE, BELTS AND PULLEYS PAGE 32 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV.
MQ STREET PRO 1 SAW— ENGINE, BELTS AND PULLEYS ENGINE, BELTS AND PULLEYS NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 PART NO. 15103 9152 0669A 0300B 5283 23811-352 6059B 23665-001 25354 13249 23665-009 27044-001 26105-751 0202 161C 26112-354 10779-011 10133 10136 PART NAME QTY. ENGINE 13 HP HONDA RED 1 KEY, 1/4 X 1-3/4 1 SCREW.
MQ STREET PRO 1 SAW — ELECTRIC MOTOR ELECTRIC MOTOR 1 3 8 2 9 4 10 11 5 11 7 13 6 12 PAGE 34 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV.
MQ STREET PRO 1 SAW — ELECTRIC MOTOR ELECTRIC MOTOR NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 PART NO. 26142-754 16779-006 23665-005 26152-502 27084-002 23665-009 26145-351 25215-001 23865-001 2623 07030-005 26136-004 5283 PART NAME BELT GUARD RED BELT - 3VX300 PULLEY (MOTOR) MOTOR, 5 HP ELECTRIC SPACER PULLEY (SPINDLE) FRAME LABEL, WARNING SCREW, 10 - 24 X 3/4 SCREW, HHC 5/16 -18 x 1-1/4" FLAT WASHER 5/16 SPINDLE NUT, 5/16 - 18 LOCK QTY.
MQ STREET PRO 1 SAW — UNDERCARRIAGE UNDERCARRIAGE PAGE 36 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV.
MQ STREET PRO 1 SAW — UNDERCARRIAGE UNDERCARRIAGE NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 25A 25B 26 26 27 28 29 30 31 PART NO.
MQ STREET PRO 1 SAW — BLADE ASSEMBLY & WATER SYSTEM BLADE ASSEMBLY & WATER SYSTEM 1 2 3 4 5 7 19 18 20 27 26 17 16 25 16 6 10 9 4 8 2 21 2 24 28 12 15 11 13 23 14 22 26 25 30 29 32 31 35 36 41 30 40 39 37 33 35 38 26 1 PULLEY ASSEMBLY. SEE PAGE 30. 34 40 1 37 PAGE 38 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV.
MQ STREET PRO 1 SAW — BLADE ASSEMBLY & WATER SYSTEM BLADE ASSEMBLY & WATER SYSTEM NO. 1 2 3 4 5 6 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 PART NO. PART NAME QTY. REMARKS 22129-001 CLAMP 2 0948 FLATWASHER, 1/4 5 0181B LOCK WASHER 1/4 5 0949 HEX NUT 1/4 - 20 5 0424 SCREW, HHCS 1/4 - 20 X 1 4 29406-753 BLADE GUARD 18" RED (GAS) 1 29406-752 BLADE GUARD 16" RED (ELECT.) 1 18626-001 SPRING 2 23255-011 HOSE 26" 1 23566-001 BARBED FITTING 90 DEG.
MQ STREET PRO 1 SAW — POINTER ASSEMBLY POINTER ASSEMBLY 1 2 4 5 3 6 8 5 7 PAGE 40 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV.
MQ STREET PRO 1 SAW — POINTER ASSEMBLY POINTER ASSEMBLY NO. 1 2 3 4 5 6 7 8 PART NO. 21017 29043-001 1007 1456 10133 27073-001 10136 29042-501 PART NAME SCREW, POINTER ARM WHEEL, POINTER NUT, HEX JAM 3/8 - 16 NUT, HEX FINISH 3/8 - 16 NUT, NYLOC 3/8 - 16 ARM, POINTER WASHER, FLAT 3/8 INDICATOR ASSEMBLY QTY. 1 1 2 2 2 1 2 1 REMARKS SP 1 SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — AIR CLEANER ASSY. AIR CLEANER ASSY. PAGE 42 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — AIR CLEANER ASSY. AIR CLEANER ASSY. NO. 1 ◊ 1◊ 2 3 * 4# 5 6 * 7# 8# 9 10 ◊ 10◊ 11 12 13 14 15 16 PART NO. 16271ZE2000 16271ZE2010 17210ZE3010 17218ZE3000 17219ZE3840 17230ZE3841 17232891000 17238ZE2310 17239ZE3840 17410ZE3840 17470ZE3841 17470ZE3842 17475ZE3841 17476ZE3841 90142MB0000 90325044000 90009ZE2003 9405006000 NOTE PART NAME QTY. REMARKS GASKET, ELBOW 1 GASKET, ELBOW 1 ELEMENT, AIR CLEANER ........................ 1 .........
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CAMSHAFT ASSY. CAMSHAFT ASSY. PAGE 44 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CAMSHAFT ASSY. CAMSHAFT ASSY. NO. 1 2 3 4 5 6 * 7 8 9 10 11 12 13 14 15 16 17 PART NO. 14100ZF6W01 14410ZE3013 14431ZE2010 14441ZE2000 14451ZE1013 14568ZE1000 14711ZE3000 14721ZE3000 14751ZE2003 14771ZE2000 14773ZE2000 14775ZE2010 14781ZE2000 14791ZE2010 90012ZE0010 90206ZE1000 12209ZE8003 PART NAME QTY. REMARKS CAMSHAFT ASSEMBLY .......................... 1 .........
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CARBURETOR ASSY. CARBURETOR ASSY. PAGE 46 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CARBURETOR ASSY. CARBURETOR ASSY. NO. 1 2$ 3$ 4$ 4A+ 5$ 6$> 6A+ 7$ 7A+ 8$ 9$ 10$ 11$ 12$+ 13 14 15 16 20 22$ 23$ 24$ 25$+ 26$ 28$ 31 * 33$ 33$ 33$ 34$ 34A+ 35$ PART NO.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CONTROL ASSY. CONTROL ASSY. PAGE 48 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CONTROL ASSY. CONTROL ASSY. NO. 2 3 4 5 6 10 * 11 * 12 * 13 * 14 * 15 * 17 * 18 * 21 22 24 * 27 * 28 * 29 PART NO. 16551ZE3000 16555ZE3000 16561ZE3000 16562ZE3000 16570ZE3W20 16571ZE3W00 16574ZE1000 16575ZE2W00 16576891000 16578ZE1000 16581ZE3W00 16584883300 16592883310 90013883000 90015ZE5010 90114SA0000 93500050320A 93500050160A 9405006000 PART NAME QTY. REMARKS ARM, GOVERNOR 1 ROD, GOVERNOR 1 SPRING, GOVERNOR 1 SPRING, THROTTLE RETURN 1 CONTROL ASSY. (REMOTE) ......
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CRANKCASE ASSY. CRANKCASE COVER ASSY. PAGE 50 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CRANKCASE ASSY. CRANKCASE COVER ASSY. NO. 2 PART NO. 11300ZE3602 2 11300ZE3604 ◊ 2◊ 3 4 5 8# * 9 10>%$+ 11>%$+ 12>%$+ >$% 13 >%$ 13 ◊>%$ 13◊ 15>%$ 16 17>%$ 18>%$ 19 20>%$ 21>%$ 11300ZE3604 11381ZE3801 15600ZG4003 15600735003 15625ZE1003 16510ZE3000 16511ZE8000 16512ZE3000 16513ZE2000 16531ZE2000 16531Z0A000 16531Z0A000 90602ZE1000 90701HC4000 91201ZE3004 9410106800 957010804000 961006202000 961006207000 NOTE PART NAME QTY. REMARKS COVER ASSY.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PAGE 52 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CRANKSHAFT ASSY. CRANKSHAFT ASSY. NO. 2 ◊ 2◊ PART NO. 13310ZF6W10 13310ZF6W11 2◊ ◊ 13310ZF6W12 8 11 12 * ◊# 12◊ ◊+ 12◊ 13351ZE3010 90745ZE2600 91001ZF6003 91001ZF6003 91001ZF6013 NOTE PART NAME QTY. REMARKS CRANKSHAFT .......................................... 1 ......... INCLUDES ITEM W/ * CRANKSHAFT .......................................... 1 ......... INCLUDES ITEM W/# ...............................................................................
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. PAGE 54 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. NO. 1 ◊ 1◊ 2 ◊ 2◊ ◊ 2◊ 4 9 10 12 %# 13 14 17 18 19 20 21%# 22 ◊ 22◊ ◊ 22◊ 23 PART NO. 12000ZF6W13 12000ZF6417 15510ZE2043 15510ZE2043 15510ZE2053 16541ZE3010 90131883000 90446KE1000 91201ZE3004 91203952771 91353671004 9405010000 9410912000 9425110000 957010601200 961006202000 34150ZH7003 34150ZH7003 34150ZH7013 90013883000 NOTE PART NAME QTY. REMARKS CYLINDER ASSY. (ALERT) .................... 1 ..............
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 56 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. NO. 1 ◊ 1◊ 2 % * 3 % * 4 % * 5 6 7 8 10 11 12 13 14 16 17 ◊ 17◊ ◊ 17◊ 18 18 18 18 PART NO. 12200ZF6W01 12200ZF6406 12204ZE2306 12205ZE2305 12216ZE2300 12251ZF6W00 12310ZE3791 12315ZE3840 12391ZE2020 17316611000 90014ZE2000 90042ZE8000 92900080320E 90441ZE2010 9430112200 957251008000 957251008000 957011008000 9807955846 9807955855 9807956846 9807956855 NOTE PART NAME QTY. REMARKS CYLINDER HEAD ..............................
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — FAN COVER ASSY. FAN COVER ASSY. PAGE 58 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — FAN COVER ASSY. FAN COVER ASSY. NO. 4 7 10 13 ◊ 13◊ ◊ 13◊ 15 PART NO. 16731ZE2003 19610ZE3010ZB 19631ZE3W00 36100ZH7003 36100ZF6P81 36100ZF6P82 90013883000 NOTE PART NAME QTY. REMARKS CLIP, TUBE 1 COVER, FAN *NH1* (BLACK) 1 SHROUD 1 SWITCH ASSY., ENGINE STOP 1 SWITCH ASSY., ENGINE STOP ................. 1 .............. S/N 1412956 AND BELOW SWITCH ASSY., ENGINE STOP ................. 1 ..............
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — FLYWHEEL ASSY. FLYWHEEL ASSY. PAGE 60 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — FLYWHEEL ASSY. FLYWHEEL ASSY. NO. 1 3 7 10 ◊ 10◊ ◊ 10◊ 11 PART NO. 19511ZE3000 28450ZE3W11 31100ZE3701 90201ZE3V00 90201ZE3V00 90201ZE3790 90741ZE2000 NOTE PART NAME QTY. REMARKS FAN, COOLING 1 PULLEY, STARTER (SCREEN GRID) 1 FLYWHEEL 1 NUT, SPECIAL (16MM) (1) 1 NUT, SPECIAL (16MM) (1) ........................... 1 .............. S/N 1317976 AND BELOW NUT, SPECIAL (16MM) (1) ........................... 1 ..............
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 62 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — FUEL TANK ASSY. FUEL TANK ASSY. NO. 1 3 6 ◊ 6◊ ◊ 6◊ ◊ 6◊ 8 ◊ 8◊ 9 * 9# 15 17 18 ◊ 18◊ PART NO. 16854ZH8000 16955ZE1000 17510ZE3010ZB 17510ZE3020ZB 17510ZE3800ZA 17510ZE3801ZA 17620ZH7023 17620Z0T305 17631ZH7003 17631Z0T812 91353671004 9405008000 950014523540 950014523540 18◊ ◊ 20 ◊ 20◊ ◊ 20◊ 22 91424Z5L801 9500202080 9500202080 950024080008 957010802500 NOTE PART NAME QTY.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — IGNITION COIL ASSY. IGNITION COIL ASSY. PAGE 64 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — IGNITION COIL ASSY. IGNITION COIL ASSY. NO. 1 ◊ 1◊ ◊ 1◊ 2 8 12 17 18 PART NO. 30500ZF6W02 30500ZF6W02 30500ZF6W03 30700ZE1013 31512ZE2000 36101ZE2701 90015883000 90684ZA0601 NOTE PART NAME QTY. REMARKS COIL ASSY., IGNITION 1 COIL ASSY., IGNITION ..................................... 1.......... S/N 1411816 AND BELOW COIL ASSY., IGNITION ..................................... 1.......... S/N 1411817 AND ABOVE CAP ASSY.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — MUFFLER ASSY. MUFFLER ASSY. PAGE 66 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — MUFFLER ASSY. MUFFLER ASSY. NO. 2 3 5 6 ◊ 6◊ ◊ 6◊ 7 8 9 10 19 22 27 28 31 PART NO. 18310ZE2W61 18320ZE2W61 18330ZE2W00 18331ZE3810 18331ZE3810 18331ZE3811 18333ZF6W01 18355ZE2W00 18381ZE2W10 18381ZE2800 90050ZE1000 90055ZE1000 90006ZE2000 9405008000 90055ZE1000 NOTE PART NAME QTY. REMARKS MUFFLER 1 PROTECTOR, MUFFLER 1 PIPE, EX. 1 CAP, MUFFLER 1 CAP, MUFFLER ...................................................... 1 ......... S/N 1166160 AND BELOW CAP, MUFFLER ......
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — PISTON ASSY. PISTON ASSY. PAGE 68 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — PISTON ASSY. PISTON ASSY. NO. 1 1 1 1 2 2 2 2 3 4 4 5 * 6 PART NO. 13010ZF6005 13011ZF6005 13012ZF6005 13013ZF6005 13101ZF6W00 13102ZF6W00 13103ZF6W00 13104ZF6W00 13111ZF6W00 13200ZE3020 13200ZE3315 90001ZE8000 90601ZE3000 PART NAME QTY. REMARKS RING SET, PISTON (STD) 1 RING SET, PISTON (0.25) 1 RING SET, PISTON (0.50) 1 RING SET, PISTON (0.75) 1 PISTON (STD) 1 PISTON (0.25) 1 PISTON (0.50) 1 PISTON (0.75) 1 PIN, PISTON 1 ROD ASSY., CONNECTING (STD) ...................
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — RECOIL STATER ASSY. RECOIL STARTER ASSY. PAGE 70 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — RECOIL STATER ASSY. RECOIL STARTER ASSY. NO. 1 2 * 3 * 4 * 5 * 6 * 7 * 8 * 10 * 11 * ◊ 11◊ * 13 * 14 PART NO. 28400ZE3W01ZB 28410ZE3W01ZB 28421ZE3W01 28422ZE2W01 28441ZE2W01 28442ZE2W01 28443ZE2W01 28444ZE2W01 28461ZE2W02 28462ZV7003 28462ZE3W01 90004ZE2W01 90008ZE2003 NOTE PART NAME QTY. REMARKS STARTER ASSY., RECOIL *NH1* (BLACK) .............. 1 ......
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — LABELS ASSY. LABELS ASSY. PAGE 72 — SP 1 SAW — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — LABELS ASSY. LABELS ASSY. NO. 1 ◊ 1◊ ◊ 1◊ 2 ◊ 2◊ ◊ 2◊ ◊ 3◊ 4 ◊ 5◊ 6 7 PART NO. 87522ZH9010 87516ZH7000 87516ZH7810 87521ZF6W02 87521ZF6W03 87521ZF6W04 87532ZH7000 87534ZE1841 87535ZE1841 87532ZH8810 87528ZE2810 NOTE PART NAME QTY. REMARKS LABEL, CAUTION(ENGLISH ETC.) 1 MARK OPERATOR CAUTION 1 MARK OPERATOR PICTOGRAPH (OPTION) 1 EMBLEM (GX390 HONDA 13.0) 1 EMBLEM (GX390 HONDA 13.0) ............................ 1 ............
TERMS AND CONDITIONS OF SALE — PARTS PAYMENT TERMS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Terms of payment for parts are net 30 days. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments are F.O.B. point of origin.
NOTE PAGE SP 1 SAW — OPERATION AND PARTS MANUAL — REV.
OPERATION AND PARTS MANUAL HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING UNITED STATES Multiquip Corporate Office 18910 Wilmington Ave. Tel. (800) 421-1244 Carson, CA 90746 Fax (800) 537-3927 Contact: mq@multiquip.