OPERATION AND PARTS MANUAL SP2 StreetPro SERIES MODELS SP213H20A (PUSH) SP2S20H20A (SELF-PROPELLED) PROFESSIONAL PAVEMENT SAWS (HONDA GX390K1QWT2 GASOLINE ENGINE) (HONDA GX620TXF2 GASOLINE ENGINE) Revision #1 (05/17/10) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
PROPOSITION 65 WARNING Engine exhaust and some of its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Some examples of these chemicals are: Leadfromlead-basedpaints. Crystallinesilicafrombricks. Cementandothermasonryproducts. Arsenicandchromiumfromchemically treatedlumber.
SILICOSIS/RESPIRATORY WARNINGS WARNING WARNING SILICOSIS WARNING RESPIRATORY HAZARDS Grinding/cutting/drilling of masonry, concrete, metal and other materials with silica in their composition may give off dust or mists containing crystalline silica. Silica is a basic component of sand, quartz, brick clay, granite and numerous other minerals and rocks. Repeated and/or substantial inhalation of airborne crystalline silica can cause serious or fatal respiratory diseases, including silicosis.
TABLE OF CONTENTS SP213H20A/SP2S20H20A SP2 StreetPro SAWS Here's How To Get Help .................................................... 2 Table Of Contents ............................................................. 3 Saw Specifications ........................................................... 4 Engine Specifications ....................................................... 5 Dimensions ....................................................................... 6 Safety Message Alert Symbols ...................
www.multiquip.com PARTS ORDERING PROCEDURES Ordering parts has never been easier! Choose from three easy options: Order via Internet (Dealers Only): Best Deal! Effective: January 1st, 2006 If you have an MQ Account, to obtain a Username and Password, E-mail us at: parts@multiquip. com. Order parts on-line using Multiquip’s SmartEquip website! N View Parts Diagrams N Order Parts N Print Specification Information To obtain an MQ Account, contact your District Sales Manager for more information.
SPECIFICATIONS Saw Blade Capacity Cutting Depth Arbor Diameter Front Wheels Rear Wheels Nominal Mass* Maximum Operating Mass** lbs. (kg) Sound Pressure at Operator’s Position Hand/Arm Vibration (At Handle)*** Engine * Table 1. Specifications SP2 (Push) SP2 (Self-Propelled) SP213H20A SP2S20H20A 508 mm (20 in.) 191 mm (7.5 in.) 191 mm (7.5 in.) 125 mm Dia. x 50 mm Wide (5 in. x 2 in.) 203 mm Dia. x 50 mm Wide (8 in. x 2 in.) 141 kg (310 lbs.) 173 kg (380 lbs.) 170 kg (373 lbs.) 201 kg (443 lbs.
ENGINE SPECIFICATIONS TABLE 2. ENGINE SPECIFICATIONS Engine Model Honda GX390K1QWT2 Honda GX620TXF2 Engine Type Air-cooled 4-Stroke Single Cylinder OHV Horizontal Shaft Engine Air-cooled 4-Stroke OHV 90° V-Twin; Horizontal Shaft Bore x Stroke 88 mm x 64 mm (3.5 in. x 2.5 in.) 77 x 66 mm (3.0 x 2.6 in) Displacement 389 cc (23.7 cu. in.) 614 cc (37.4 cu. in.) Maximum Power Output 13 HP / 3,600 rpm 20 HP / 3,600 rpm Maximum Torque 2.7 kg-m (2,500 rpm) 19.5 ft-lbs (2,500 rpm) 4.
DIMENSIONS Figure 1. SP2 Dimensions TABLE 3. DIMENSIONS REFERENCE LETTER DESCRIPTION DIMENSIONS IN. (MM) A Max Height (Handle Bars fully lowered & Front Pointer raised) 914 mm (36 in.) B Max Handle Bar Height (fully raised) 1016 mm (40 in.) C Max Length (Handle Bars & Front Pointer fully raised) 1092 mm (43 in.) D Max Length (Handle Bars fully raised & Front Pointer lowered) 1727 mm (68 in.) E Max Handle Bar Width 610 mm (24 in.) F Max Width 622 mm (24.5 in.
SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! Safety precautions should be followed at all times when operating this equipment. Failure to read, understand and comply with the Safety Messages and Operating Instructions could result in injury to yourself and others. NOTE This Owner's Manual has been developed to provide instructions for the safe and efficient operation of the SP2 Series Pavement Saws.
SAFETY MESSAGE ALERT SYMBOLS Accidental Starting ALWAYS place the ON/OFF switch in the OFF position, when the saw is not in use. Over Speed Conditions NEVER tamper with the factory settings of the engine governor. Personal injury and damage to the engine or equipment can result if operating in speed ranges above maximum allowable. Guards and Covers In Place NEVER operate the saw without blade guards and covers in place. Adhere to safety guidelines or other applicable local regulations.
RULES FOR SAFE OPERATION RULES FOR SAFE OPERATION WARNING Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. ■ Replace nameplate, operation and safety decals when they become difficult to read. ■ ALWAYS check the saw for loosened hardware such as nuts and bolts before starting. ■ NEVER touch the hot exhaust manifold, muffler or cylinder.
RULES FOR SAFE OPERATION General Safety Diamond Blade Safety ■ ALWAYS read, understand, and follow procedures in Operator's Manual before attempting to operate equipment. ■ Use appropriate steel centered diamond blades manufactured for use on pavement saws. See further blade information on pages 17 and 19. ■ ALWAYS be sure the operator is familiar with proper safety precautions and operating techniques before using the saw. ■ NEVER leave the machine unattended while running.
RULES FOR SAFE OPERATION Maintenance Safety NEVER lubricate components or attempt service on a running machine. ALWAYS allow the machine a proper amount of time to cool before servicing. Keep the machinery in proper running condition. Fix damage to the machine immediately and ALWAYS replace broken parts. Dispose of hazardous waste properly. Examples of potentially hazardous waste are used motor oil, fuel and fuel filters. DO NOT use food or plastic containers to dispose of hazardous waste.
GENERAL INFORMATION GENERAL INFORMATION Intended Use Operate the SP2 Saw, tools and components in accordance with the manufacturer's instructions. Use of any other tools for stated operation is considered contrary to designated use. The risk of such use lies entirely with the user. The manufacturer cannot be held liable for damages as a result of misuse. This saw is not intended for dry cutting. General Information The SP213H20A and SP2S20H20A pavement saws are CEcompliant.
NOTES SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
MAJOR COMPONENTS Figure 3. SP2 Saw Major Components Figure 3 displays the location of the various operational control features of the SP2 saw. Features are dependent on the specific model saw selected. The function of each console component or indicator is explained below: 1. Handle Bars – Used to steer and push the SP2 saw during cutting operations. The handle can be folded down for transportation. 2. 3. 4. Forward/Reverse Speed Lever – Controls forward and reverse speeds for self-propelled operation.
13HP HONDA ENGINE COMPONENTS INITIAL SERVICING Figure 4. Engine Controls and Components (Honda GX390K1QWT2) The engine (Figure 4) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers Engine manual for instructions & details of operation and servicing. 1. Fuel Filler Cap – Remove this cap to add unleaded gasoline to the fuel tank. Make sure cap is tightened securely. DO NOT over fill. 6.
20HP HONDA ENGINE COMPONENTS Figure 5. Engine Controls and Components (Honda GX620TXF2) INITIAL SERVICING The engine (Figure 5) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturer's engine manual for instructions & details of operation and servicing. 1. Engine ON/OFF Switch – ON position permits engine starting, OFF position stops engine operations. 2. Fuel Tank - Holds unleaded gasoline. For additional information refer to engine owner's manual.
INSPECTION PREPARATION / PRE-INSPECTION 1. Read and fully understand this manual, the safety intructions in particular, and the engine manufacturer's manual supplied with the saw. 2. Select the correct blade for each application. Refer to the Blades and Blade Placement sections on pages 17 through 19 for further information. 3. Check blade for wear or damage. Handle all blades with care and ALWAYS replace a damaged blade. 4.
INSPECTION Gasoline Check WARNING Motor fuels are highly flammable and can be dangerous if mishandled. DO NOT smoke while refueling. DO NOT attempt to refuel the saw if the engine is hot or running. The transmission is factory filled with approved hydraulic fluid that has a viscosity equivalent to SAE 20W-20. Should additional servicing be required, the following hydraulic fluids are recommended: General Motors Dextron B Ford MM2C-33F Ford M2C-41A International harvester Hy-Tran Fluids 1.
INSPECTION Battery (Self-Propelled models only) Self-Propelled models use a single 12-volt DC battery. (Figure 10) It is shipped ready to use. WARNING Electrolyte is an acid and must be handled with caution. Servicing instructions from the electrolyte manufacturer must ALWAYS be followed to ensure safety. Serious injury can result from careless handling and noncompliance to safety handling instructions.
INSPECTION -BLADE SPECIFIC TOOLS TO BE USED 1. Drive Pin Hole – A commonly located hole on the diamond blade core that prevents operational blade slippage between the inner & outer blade flanges (collars). Inspect the diameter of the hole to ensure there is no distortion, and that a snug fit develops between the hole and drive pin. 2. Stress Relief Holes (Gullets) – Check the steel core for cracks that may have propagated from the slots and/or gullets.
BLADE PLACEMENT Table 5. MATERIAL LISTING AND BLADE SELECTION Material Blade Cured Concrete Cured Concrete Blade Green Concrete Green Concrete Blade Asphalt Asphalt Blade Asphalt over Concrete Asphalt/Concrete Blade Block, Brick, Masonry, Refractories Masonry Blade Tile, Ceramic, Stone Tile Blade Diamond Blades Selecting the diamond blade TYPE and GRADE defines how the blade will perform both in cutting speed and blade life.
INSPECTION - BLADE PLACEMENT 1. Blade Guard – Raise the front half of the blade guard to expose the blade shaft nut & outer flange. 5. Blade Pin Hole – Align this hole with the drive pin hole on the inner flange collar. 2. Blade Nut Wrench – Remove the blade nut wrench (3) from the tool holder and unscrew the blade shaft nut (right-side). This nut loosens clockwise and tightens counterclockwise. 6. Diamond Blade – Ensure that the proper blade has been selected for the job.
INSPECTION -GUARDS, COVERS & BELTS Guards and Covers Check WARNING V-Belts and Covers D NEVER operate the saw without blade guards and covers (Figures 13 and14) in place. DO NOT operate with the front of the blade guard raised. The blade exposure cannot exceed 180 degrees during operations. CAUTI CAUTION D NEVER attempt to check the V-belt with the engine running because severe injury can occur. Keep fingers, hands, hair and clothing away from all moving parts.
INSPECTION - BELTS & WATER TANK 3. Check V-belt tension (Figure 17) by using a tensionmeter (2.7 - 4.1 kg/6.0 - 9.0 lbs.) against the inside belt at a mid point between the two pulleys, or by deflecting the center belt at a mid point 10 mm (3/8”) - 13 mm (1/2”). Water Tank The SP2 Saw is equipped with a removable 19-liter (5-gallon) on-board water tank fitted in the top of the console which can be connected to the brass hose fitting on the rear of the operators console (Figure 18).
INSPECTION - ADJUSTMENTS CAUTI CAUTION NEVER stop the engine while cutting at high speeds, except in case of an emergency.This can damage your SP2 Saw. Adjusting the Blade Height The SP2 saw uses a manual raise/lower crank handle located on the console with clockwise rotation providing lowering action, and counter-clockwise rotation providing raising and lowering action (Figure 21). Adjusting the Handle Bars To adjust the blade height: The SP2 has adjustable height handle bars.
MANUAL START-UP (13HP HONDA ENGINE) The following start-up procedure makes reference to a HONDA 13 HP Engine (Manual Start). MANUAL START-UP (13HP HONDA ENGINE) CAUTI CAUTION D DO NOT attempt to operate the saw until this manual has been read and thoroughly understood. Engine operating steps may vary. See included engine manufacturer's operating manual. WARNING When the engine is running the cutting blade is ALWAYS rotating . Keep hands and feet clear of rotating blade.
MANUAL START-UP (13HP HONDA ENGINE) 7. If operating the SP2 in cold weather conditions, skip this step and proceed to step 8. Place the Choke Lever (Figure 26) in the OPEN position. Skip to step9. Figure 24. Engine ON/Off Switch (Engine) 3. Ensure the diamond blade has been mounted correctly and that it is raised above the surface you are about to saw. 4. Ensure the water tank is filled to capacity (19 liters/5 gallons).
MANUAL START-UP (13HP HONDA ENGINE) Figure 28. Throttle Lever 10. Grasp the starter grip (Figure 29) and slowly pull it out. The resistance becomes the hardest at a certain position, corresponding to the compression point. Pull the starter grip briskly and smoothly for starting. CAUTI CAUTION DO NOT pull the starter rope all the way to the end. DO NOT release the starter rope after pulling. Allow it to rewind as soon as possible. Figure 29. Starter Grip 11.
ELECTRIC START-UP (20HP HONDA ENGINE) The following start-up procedure makes reference to a HONDA 20 HP Engine (Electric Start) ELECTRIC START-UP (20HP HONDA ENGINE) CAUTI CAUTION D DO NOT attempt to operate the saw until this manual has been read and thoroughly understood. Engine operating steps may vary. See included engine manufacturer's operating manual. WARNING When the engine is running the cutting blade is ALWAYS rotating . Keep hands and feet clear of rotating blade.
ELECTRIC START-UP (20HP HONDA ENGINE) The CLOSED position of the choke lever enriches the fuel mixture for starting a COLD engine. The OPEN position provides the correct NOTE fuel mixture for normal operation after starting, and for restarting a warm engine. 6. Place the throttle lever (Figure 35) halfway between FAST and SLOW for starting. Figure 32. Engine Start Switch (OFF Position) 3. Ensure the diamond blade has been mounted correctly and that it is raised above the surface you are about to saw. 4.
OPERATION OPERATION WARNING Emergency Stop Procedure ALWAYS cut with the saw at FULL THROTTLE. Attempting to cut with the saw at less than full throttle could cause the blade to bind or stop abruptly in the slab resulting in serious injury to the operator or others in the area. If the engine must be stopped in an emergency situation: Toggle the engine Shutdown switch located on the handlebars (Figure 31) in EITHER DIRECTION to the "OFF" position.
OPERATION 5. When the end of the cut has been reached, use the raise/ lower crank on the console to raise the blade out of the cut. 6. When cutting is complete, turn the engine OFF using the ENGINE STOP TOGGLE SWITCH on the handlebars, and wait for the blade to stop rotating. 3. Move the travel lever towards the FORWARD position to increase forward travel speed during cutting (Figure 40). Placing the travel lever fully forward will move the saw at maximum speed. 7.
OPERATION Cutting WARNING The operator MUST wear the appropriate protective equipment and clothing while engaged in sawing. Failure to do so can result in SERIOUS INJURY. DANGER DO NOT operate this machine without the Blade Guard or V-belt Guards in place.While the blade is spinning, DO NOT place hands, feet, or other body parts near the blade to avoid SERIOUS INJURY or DEATH. When cutting, determine the required cutting depth and use an appropriately sized blade.
OPERATION Finishing A Cut 1. Raise the blade out of the cut by cranking the Raise/Lower handle COUNTER-CLOCKWISE (Figure 37). Raise the blade high enough out of the cut to clear the surface and allow the saw to be maneuvered. 2. Shut the engine down according to the SHUT-DOWN PROCEDURES in the next section. WARNING Engine components can generate EXTREME heat. Restarting After Intervention If cutting is interrupted where the engine stops or is turned off while the blade is still in the cut: a.
SHUT-DOWN PROCEDURES Stopping the Engine (Push Model) Stopping the Engine (Self-Propelled Models) Stopping the engine under normal conditions: 1. Place the engine throttle lever (Figure 45) in the SLOW position, and listen for the engine speed to decrease. Allow engine to run for 2 or 3 minutes for proper cooldown. Stopping the engine under normal conditions: Figure 45. Throttle Lever 2. Turn the engine Shutdown switch located on the handlebars (Figure 46) to the "OFF" position.
MAINTENANCE Maintenance See the engine manual supplied with your machine for appropriate engine maintenance schedule and troubleshooting guide for problems. WARNING WARNING ALWAYS ensure that both ENGINE ON/ OFF switches (on the handlebar and on the engine) are in the "OFF" position, and that the spindle has COMPLETELY STOPPED ROTATING before performing any of the the following operations: General maintenance practices are crucial to the performance and longevity of your saw.
MAINTENANCE Engine tank & strainer: Clean every year/or 300 hours. Fuel line: Replace every two years/or as necessary. Spark plug: Clean/adjust every 6 months/or 100 hours. Replace every year/ or 300 hours. Servicing: The transmission reservoir is factory filled. Should servicing be required, use SAE20W-20, API classification (SE,CC,CD) or better, General Motors Dexron B, Ford M2C-33F, M2C41A or International Harvester Hy-Tran fluids.
MAINTENANCE 3. Loosen the linkage adjustment nut and slightly lengthen the linkage rod (see Transmission Engage Lever Assy., items 11 and 13). 4. Move the transmission engage/disengage lever to the ENGAGE position to observe the proper spline-to-rear wheel contact. 5. Retighten the adjustment nut. 8. Retighten the (4) 1-1/2” HHC screws. 9. Replace all guards and covers. WARNING CLUTCH PULLEY NEVER attempt to check the V-belt with the engine running.
MAINTENANCE Figure 55. Pulley Alignment Figure 57. Blade Side Bearing (Right Side) Figure 56. V-Belt Alignment Blade Shaft Bearing Replacement Figure 58. Pulley Side Bearing (Left Side) Although the steps for this operation are listed here, it is recommended that this procedure be performed by an authorized service center. The SP2 saw is supported by “tapped base lock collar (w/set screw)" self-aligning Blade Shaft Bearings (Figures 57 and 58).
MAINTENANCE Battery Maintenance Mishandling of the battery shortens the service life of the battery and adds to maintenance cost. When handling the battery do the following: Be careful not to let the battery electrolyte come in contact with your body or clothing. Always wear eye protection and rubber gloves, since the battery contains sulfuric acid which burns skin and eats through clothing. Always check the battery terminals periodically to ensure that they are in good condition.
MAINTENANCE Decommissioning Saw/Components Decommissioning is a controlled process used to safely retire a piece of equipment that is no longer serviceable. If the equipment poses an unacceptable and unrepairable safety risk due to wear or damage or is no longer cost effective to maintain, (beyond lifecycle reliability) and is to be decommissioned, (demolition and dismantlement), the following procedure must take place: 1. Drain all fluids completely.
13HP ENGINE WIRING DIAGRAM (RECOIL START) Figure 60. 13HP Honda Engine Wiring Diagram PAGE 44 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
20HP ENG. WIRING DIAGRAM (ELECTRIC START) Figure 61. 20HP Honda Engine Wiring Diagram SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
TROUBLESHOOTING (ENGINE) Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take a remedial action following the diagnosis based on the Engine Troubleshooting (Table 7) information shown below and on the proceeding page. If the problem cannot be remedied, please leave the unit just as it is and consult our company's business office or service plant. TABLE 8.
TROUBLESHOOTING (ENGINE) TABLE 8. ENGINE TROUBLESHOOTING (CONTINUED) SYMPTOM "Weak in power" compression is proper and does not misfire. "Weak in power" compression is proper but misfires. Engine overheats. Rotational speed fluctuates. Recoil star ter malfunction. NOTE POSSIBLE CAUSE SOLUTION Air cleaner not clean? Replace air cleaner Improper level in carburetor? Check float adjustment, re-build carbureator. Defective Spark plug? Clean or replace spark plug.
TROUBLESHOOTING (BLADE) Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take a remedial action following the diagnosis based on the Blade Troubleshooting (Table 9) information shown below and on the proceeding page. If the problem cannot be remedied, please leave the unit just as it is and consult our company's business office or service plant. TABLE 9.
NOTES SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
EXPLANATION OF CODE IN REMARKS COLUMN The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. NOTICE The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availability of the parts listed. SAMPLE PARTS LIST NO. 1 2% 2% 3 4 PART NO. PART NAME QTY. REMARKS 12345 BOLT......................1 .....
SUGGESTED SPARE PARTS SP213H20A (13HP PUSH) 1 to 3 Units Qty. ..... P/N ..................... Description 3 .......... 16052 ................. V-BELTS, DRIVE 1 .......... 29013-001 .......... WRENCH, BOX END 1-1/2 IN. 1 .......... 60087 ................. ROPE, FRONT POINTER 1/4 IN. 2 .......... 15081 ................. GRIPS, HANDLE BAR 1 IN. 1 .......... 06922-003 .......... BLADE SHAFT NUT, RIGHT SIDE 1 .......... 07038-016 .......... BLADE SHAFT NUT, LEFT SIDE 1 .......... 26928-002 ..........
NAME PLATE AND DECALS NAME PLATE AND DECALS. A C B 1 12 3 11 6 4 21 D 17 18 20 5 19 2 15 7 16 1 13 7 14 MO SERIA DEL LN O. 8 1 1 4 9 10 3 PAGE 52 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
NAME PLATE AND DECALS NAME PLATE AND DECALS NO PART NO PART NAME QTY. REMARKS 1 38213 DECAL, MULTIQUIP 4 2 23596-001 DECAL, RECOMMENDED MAINTENANCE 1 3 38224 DECAL, SP2 2 4 NAMEPLATE ................................................................... 1 ......... CONTACT MQ PARTS DEPT. 5 28853-001 DECAL, FORWARD/REVERSE LEVER 1 6 25678 DECAL, CCW ROTATION ................................................ 1 ......... SAFETY ITEM 7 22122-001 DECAL, SERIOUS INJURY WARNING ........................... 1 .........
UNDERCARRIAGE ASSY. UNDERCARRIAGE ASSY. 15 1 2 16 4 6 13 6 14 9 8 7 10 10 11 12 3 6 6 5 8 PAGE 54 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
UNDERCARRIAGE ASSY. UNDERCARRIAGE ASSY. NO PART NO 1 28777-352 2 28781-002 3 28782-351 4 28086-001 5 28085-001 6 8151 7 10065-090 8 25181-001 9 8081 10 0447 11 3216 12 0685 13 2621 14 1162 A 15 35152 16# PART NAME QTY. REMARKS FRAME ASSY. 16”/18”/20” 1 AXLE, REAR & FRONT 1 FRAME, UNDERCARRIAGE ASSY. 1 WHEEL, 8 X 2 .75 ROLLER BEARING REAR 2 WHEEL, 5 X 2 .75 ROLLER BEARING FRONT 2 WASHER, FLAT SAE 3/4 8 BEARING PLAIN 2 COLLAR, SET 0.75 X 1.50 X .
BLADE SHAFT ASSY. BLADE SHAFT ASSY. PAGE 56 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
BLADE SHAFT ASSY. BLADE SHAFT ASSY. NO PART NO 1 28807-002 2 28081-001 3 28811-002 4 26928-002 26928-004 5 0125 6 6059 B 7 06922-003 8 06502-012 9 2955 10 0448 11 25172-003 11 12 13 14 15 16 17 23280-001 1528 28841-001 0424 2621 1162 A 16052 17 18 19 20 15897 23250-002 07038-016 15046 PART NAME QTY. REMARKS SPINDLE, BLADE 1 BEARING, PILLOW BLOCK 1.25ID AS206-20 2 FLANGE, BLADE INSIDE 4.0OD X 1.0ID 1 FLANGE, BLADE OUTSIDE 1.0ID X5.0OD X 56 1 FLANGE, BLADE OUTSIDE 1.0ID X4.
LIFTING BALE ASSY. LIFTING BALE ASSY. PAGE 58 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
LIFTING BALE ASSY. LIFTING BALE ASSY. NO PART NO 1 28890-351 1 28890-352 2 28893-001 2 28893-002 3 0205 4 10133 5 10136 6 5283 7 0300 B 8 0202 PART NAME 13HP, LIFT BALE ASSY. 20HP, LIFT BAIL ASSY. BRACE, 13HP BAIL BRACE, 20HP BAIL SCREW, HHC 3/8-16 X 1.0 NUT, NYLOC 3/8-16 WASHER, FLAT SAE 3/8 NUT, NYLOC 5/16-18 WASHER, FLAT SAE 5/16 SCREW, HHC 5/16-18 X 1 ZINC QTY. 1 1 1 1 2 2 4 2 4 2 REMARKS SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
CONSOLE ASSY. (PUSH MODELS) CONSOLE ASSY. (PUSH MODELS) PAGE 60 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
CONSOLE ASSY. (PUSH MODELS) CONSOLE ASSY. (PUSH MODELS) NO PART NO PART NAME QTY. REMARKS 1 28796-351 HANDLE ASSY. 1 2 15081 GRIP, 1”ID, H/W #40001610055 2 3 4196 SCREW, HHC 3/8-16 X .75 4 4 0166 A WASHER, LOCK 3/8 MED. 4 5 10136 WASHER, FLAT SAE 3/8 4 6 28791-751 HOUSING ASSY. - RED 1 7 28805-701 COVER, CONSOLE SIDE - RED 1 8 29013-001 WRENCH, BOX END 1 1/2 1 9 1579 SCREW, HHC 1/4-20 X 1/2 4 10 0181 B WASHER, LOCK 1/4 MED. 8 11 0948 WASHER, FLAT SAE 1/4 4 12 0205 SCREW, HHC 3/8-16 X 1.
CONSOLE ASSY. (SELF-PROPELLED MODELS) CONSOLE ASSY. (SELF- PROPELLED MODELS) PAGE 62 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
CONSOLE ASSY. (SELF-PROPELLED MODELS) CONSOLE ASSY. (SELF- PROPELLED MODELS) NO PART NO PART NAME QTY. REMARKS 1 28796-351 HANDLE ASSY. 1 2 15081 GRIP, 1” ID 2 3 4196 SCREW, HHC 3/8-16 X .75 4 4 0166 A WASHER, LOCK 3/8 MED. 4 5 10136 WASHER, FLAT SAE 3/8 4 6 28091-401 SHIFT CONTROL ASSY. 1 8 28834-001 COVER, REAR 1 9 0131 A SCREW, HHC 1/4-20 X 3/4 2 10 1002 4 NUT, NYLOC 1/4-20 2 11 4001 WASHER, FLAT USS 3/8 PLD 8 12 1579 SCREW, HHC 1/4-20 X 1/2 8 13 0181 B WASHER, LOCK 1/4 MED. 8 14 28791-751 HOUSING ASSY.
13HP HONDA ENGINE MOUNT ASSY. 13HP HONDA ENGINE MOUNT ASSY. PAGE 64 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
13HP HONDA ENGINE MOUNT ASSY. 13HP HONDA ENGINE MOUNT ASSY. NO 1 2 3 4 5 6 7 8 9 PART NO 15868-032 0447 968011 10176 3214 9154 10136 10133 28804-351 PART NAME SCREW, SQHS 1/2-13 X 4, CUP PLAIN WASHER, FLAT SAE 1/2 NUT, HEX FINISH 1/2-13 NUT, NYLOC 1/2-13 SCREW, HHC 1/2-13 X 1 1/4 SCREW, HHC 3/8-16 X 1 3/4 WASHER, FLAT SAE 3/8 NUT, NYLOC 3/8-16 ENGINE BASE ASSY. QTY. 1 9 1 4 4 4 8 4 1 REMARKS SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
20HP HONDA ENGINE MOUNT ASSY. 20HP HONDA ENGINE MOUNT ASSY. PAGE 66 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
20HP HONDA ENGINE MOUNT ASSY. 20HP HONDA ENGINE MOUNT ASSY. NO PART NO PART NAME 1 15868-032 SCREW, SQHS 1/2-13 X 4, CUP PLAIN 2 0447 WASHER, FLAT SAE 1/2 3 968011 NUT, HEX FINISH 1/2-13 4 10176 NUT, NYLOC 1/2-13 5 3214 SCREW, HHC 1/2-13 X 1 1/4 6 4370 SCREW, HHC 3/8-16 X 2 1/4 7 10136 WASHER, FLAT SAE 3/8 8 10133 NUT, NYLOC 3/8-16 9 28804-351 ENGINE BASE ASSY. 10 27044-001 SPACER QTY. 1 9 1 4 4 4 8 4 1 2 REMARKS SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
13HP HONDA ENGINE ASSY. 13HP HONDA ENGINE ASSY. PAGE 68 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
13HP HONDA ENGINE ASSY. 13HP HONDA ENGINE ASSY. NO PART NO PART NAME QTY. REMARKS 1 15103 ENGINE, HONDA 13HP, GX390K1QWT2 1 2 23665-001 PULLEY, ENGINE 13 HP, 3F3V26X1 ............................ 1 .......... 13HP PUSH MODELS 2 23703-003 PULLEY, ENGINE 13 HP, 4F3V26X1 1 13HP SELF-PROP MODELS 3 6059 B KEY 1/4" SQ. X 2, 1018 STOCK 1 SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
20HP HONDA ENGINE ASSY. 20HP HONDA ENGINE ASSY. PAGE 70 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
20HP HONDA ENGINE ASSY. 20HP HONDA ENGINE ASSY. NO PART NO PART NAME 1 15104 ENGINE, HONDA 20HP GX620TXF2 2 28833-002 PULLEY, ENGINE C3 20H20, 4F3V412 3 28099-001 MOUNT, IDLER SPRING 4 923203 SCREW, SHC 1/4-20 X 3/4 5 6059 B KEY 1/4" SQ. X 2, 1018 STOCK 6 28088-002 PULLEY, TRANSMISSION QTY. 1 1 1 2 1 2 REMARKS SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
POINTERS AND COVERS ASSY. POINTERS AND COVERS ASSY. PAGE 72 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
POINTERS AND COVERS ASSY. POINTER AND COVERS ASSY. NO PART NO PART NAME QTY. REMARKS 1 28646-351 BLADE GUIDE WELDMENT 1 2 28649-001 SPANNER BUSHING CSI 1 3 28648-001 WHEEL, 3.00 X 1.25 .50 ID POLY CSI 1 4 28647-001 POINTER 1 5 1456 NUT, HEX FINISH 3/8-16 2 6 10133 NUT, NYLOC 3/8-16 2 7 15114 SLEEVE, SASH 2 8 60087 ROPE, 1/4” NYLON, BRAIDED, WHITE 7 9 0655 SCREW, HHC 5/16-18 X 3/4 7 10 0161 C WASHER, LOCK 5/16 MED.
WATER SYSTEM ASSY. WATER SYSTEM ASSY. 13 11 3 10 12 2 A 14 15 8 6 9 7 1 CONNECT WATER SOURCE HERE A 2 5 2 4 3 NOTES: 1 2 3 INCLUDED WITH ITEM 4 INCLUDED WITH ITEM 6 INCLUDED WITH ITEM 11 PAGE 74 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
WATER SYSTEM ASSY. WATER SYSTEM ASSY. NO 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PART NO 23255-004 23566-001 23259-001 23254-001 16378-009 15544 24778-001 1662 28861-501 28089-001 27040-001 28861-001 28860-001 06499-004 PART NAME HOSE, WATER 1/2 X 37 FITTING, PLASTIC 90 1/2MP X 1/2BARB VALVE, BALL 1/2 MPT BRASS NIBCO T585-70 FITTING, NIPPLE 1/2MP X 2 GALV. U-BOLT W/NUTS FITTING, BRASS 1/2FP-3/4F GRDN., STR FITTING, BRASS 1/2 BARB X 3/4 GRDN TIE, CABLE TY-RAP BLACK TRIM KIT, WATER TANK RUBBER TANK, 5 GAL.
BLADE GUARD ASSY. BLADE GUARD ASSY. 8 6 3 10 14 11 13 17 12 18 9 15 4 11 15 17 18 2 1 5 15 20 15 4 19 14 PAGE 76 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
BLADE GUARD ASSY. BLADE GUARD ASSY. NO PART NO 1 29406-754 2 28729-002 3 60021 4 0131 A 5 10024 6 24642-001 8 24778-001 9 18626-001 10 22129-001 11 21168 12 0424 13 0949 14 0181 B 15 0948 16 0205 17 0166 A 18 10136 19 35224 20 11534 PART NAME QTY. REMARKS BLADE GUARD W/A - RED ....................................... 1 ......... SAFETY ITEM GUARD, SPLASH BLADE ......................................... 1 ......... SAFETY ITEM HOSE, 3/8ID X 5/8OD BRAIDED PVC “PAC” 1.
MANUAL RAISE AND LOWER ASSY. (20 IN. ) MANUAL RAISE AND LOWER ASSY. (20 IN.) 13 PAGE 78 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
MANUAL RAISE AND LOWER ASSY. (20 IN. ) MANUAL RAISE AND LOWER ASSY. (20 IN.) NO PART NO PART NAME 1 28793-352 JACKPOST ASSY. 2 2621 ZERK, GREASE STR. 1/4-28 3 28806-001 JACKSCREW 4 28083-001 BEARING, FLANGE 5 28809-001 SPACER, JACKSCREW 6 4568 PIN, ROLL 3/16 X 1 7 28877-751 SCREW COVER ASSY., RED 8 1579 SCREW, HHC 1/4-20 X 1/2 9 0948 WASHER, FLAT SAE 1/4 10 0181 B WASHER, LOCK 1/4 MED.
BATTERY ASSY. BATTERY ASSY. PAGE 80 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
BATTERY ASSY. BATTERY ASSY. NO PART NO 1 4671 2 28096-001 3 28095-401 4 28093-001 5 28094-001 6 0131 A 7 0948 8 0949 9 0655 10 0161 D 11 0161 C 12 0300 B 13 0181 B PART NAME QTY. BATTERY, WET GR.U1, GT-X GOLD LA 1 BRACKET BATTERY 1 BATTERY HOLD DOWN KIT 425-405 1 CABLE, BATTERY POS 6GA X 42” RING TONGUE 1 STRAP, GROUND 1 SCREW, HHC 1/4-20 X 3/4 2 WASHER, FLAT SAE 1/4 2 NUT, HEX FINISH 1/4-20 PLATED 2 SCREW, HHC 5/16-18 X 3/4 3 NUT, HEX FINISH 5/16-18 3 WASHER, LOCK 5/16 MED.
TRANSMISSION ENGAGE LEVER ASSY. TRANSMISSION ENGAGE LEVER ASSY. PAGE 82 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
TRANSMISSION ENGAGE LEVER ASSY. TRANSMISSION ENGAGE LEVER ASSY. NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 PART NO 28825-351 3360 28822-351 0655 10136 6014 B 08326-005 07028-031 5283 08326-019 2199 08327-012 28830-001 28819-351 35444 2584 2906 PART NAME QTY. REMARKS LEVER ASSY. TRANS. ENGAGE 1 GRIP, 1/4 X 1 BLACK 1 MOUNT ASSY., LEVER RED 1 SCREW, HHC 5/16-18 X 3/4 4 WASHER, FLAT SAE 3/8 6 PIN, COTTER 3/32D X 1.
HYDROSTATIC TRANSMISSION ASSY. HYDROSTATIC TRANSMISSION ASSY. PAGE 84 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HYDROSTATIC TRANSMISSION ASSY. HYDROSTATIC TRANSMISSION ASSY. NO PART NO PART NAME 1 20559-001 SPRING, EXT. 3.38FL X 71OD X .105 2 1493 SCREW, HHC 3/8-18 X 3.25 3 28836-001 LINK, RETURN SPRING 4 10133 NUT, NYLOC 3/8-16 5 10136 WASHER, FLAT SAE 3/8 6 1023 SCREW, HHC 3/8-16 X 1 1/4 GR 5 7 15354 TRANSMISSION, HYD EATON 8 1578 KEY, WOODRUFF #3 9 0166 A WASHER, LOCK 3/8 MED. 10 1456 NUT, HEX FINISH 3/8-16 11 28828-351 SHIFT ARM ASSY.
HYDROSTATIC DRIVE ASSY. HYDROSTATIC DRIVE ASSY. PAGE 86 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HYDROSTATIC DRIVE ASSY. HYDROSTATIC DRIVE ASSY. NO PART NO PART NAME QTY. 1 23227-001 SPROCKET, TRANSMISSION 12 TOOTH MACH 1 2 25039 SCREW, SHS 10-24 X 1/4 2 3 23231-503 CHAIN, ROLLER .375 PITCH X 21.75 1 4 10504-035 LINK, CHAIN 1 5 5283 NUT, NYLOC 5/16-18 8 6 28084-001 SPROCKET, 3548 X 3/4 1 7 0126 KEY, WOODRUFF #9 3 8 28832-001 JACKSHAFT 1 9 23284-001 BEARING, FLANGE .
HONDA GX390K1QWT2 ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. PAGE 88 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. NO. 1 2 3 * 4# 5 6 * 7# 8# 9 10 11 12 13 14 15 16 PART NO. 16271ZE2000 17210ZE3505 17218ZE3505 17219HA2405 17230ZE3841 17232891000 17238ZE2310 17239ZE3840 17410ZE3840 17470ZE3841 17475ZE3841 17476ZE3841 90142MB0000 90325044000 90009ZE2003 0405006000 PART NAME QTY. REMARKS GASKET, ELBOW 1 ELEMENT, AIR CLEANER ........................ 1 .........
HONDA GX390K1QWT2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. PAGE 90 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. NO. 1 2 3 4 5 6 * 7 8 9 10 11 12 13 14 15 16 17 PART NO. 14100ZF6W01 14410ZE3013 14431ZE2010 14441ZE2000 14451ZE1013 14568ZE1000 14711ZE3000 14721ZE3000 14751ZE2003 14771ZE2000 14773ZE2000 14775ZE2010 14781ZE2000 14791ZE2010 90012ZE0010 90206ZE1000 12209ZE8003 PART NAME QTY. REMARKS CAMSHAFT ASSEMBLY .......................... 1 .........
HONDA GX390K1QWT2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. PAGE 92 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. NO. 1 #+ * 2 * 3 * 4 * 5 * 6 + * 7 * 8 * 9 10 * 11 * 12 * 13 14 15 16 20 22 * 23 * 24 * 25 * 26 * 28 * 31$ 33 * 33 33 * 34 * 35 * PART NO.
HONDA GX390K1QWT2 ENGINE — CONTROL ASSY. CONTROL ASSY. PAGE 94 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — CONTROL ASSY. CONTROL ASSY. NO. 2 3 4 5 6 10 * 11 * 12 * 13 * 14 * 15 * 17 * 18 * 21 22 24 * 27 * 28 * 29 PART NO. 16551ZE3000 16555ZE3000 16561ZE3000 16562ZE3000 16570ZE3W20 16571ZE3W00 16574ZE1000 16575ZE2W00 16576891000 16578ZE1000 16581ZE3W00 16584883300 16592883310 90013883000 90015ZE5010 90114SA0000 93500050320A 93500050160A 9405006000 PART NAME QTY. REMARKS ARM, GOVERNOR 1 ROD, GOVERNOR 1 SPRING, GOVERNOR 1 SPRING, THROTTLE RETURN 1 CONTROL ASSY. (REMOTE) ................
HONDA GX390K1QWT2 ENGINE — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. PAGE 96 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. NO. 2 3 4 5 8# 9 10 + * 11 + * 12 + * 13 * 13 * 15 * 16 17 * 18 * 19 20 * 21 * PART NO. 11300ZE3602 11381ZE3801 15600ZG4003 15600735003 15625ZE1003 16510ZE3000 16511ZE8000 16512ZE3000 16513ZE2000 16531ZE2000 16531Z0A000 90602ZE1000 90701HC4000 91201ZE3004 9410106800 957010804000 961006202000 961006207000 PART NAME QTY. REMARKS COVER ASSY., CRANKCASE (Q-TYPE) .........1 ................
HONDA GX390K1QWT2 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PAGE 98 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. NO. 2 8 11 12 * PART NO. 13310ZF6W10 13351ZE3010 90745ZE2600 91001ZF6003 PART NAME QTY. REMARKS CRANKSHAFT (Q-TYPE) .......................... 1 ......... INCLUDES ITEM W/ * WEIGHT, BALANCER 1 KEY(6.3X6.3X43) 1 BEARING, RADIAL BALL (6207S) 1 SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. PAGE 100 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. NO. 1 2 4 9 10 12 * 13 * 14 17 18 19 20 21 * 22 23 PART NO. 12000ZF6W13 15510ZE2043 16541ZE3010 90131896650 90446KE1000 91201ZE3004 91201ZE9003 91353671003 9405010000 9410912000 9425110000 957010601200 961006202000 34150ZH7003 90013883000 PART NAME QTY. REMARKS CYLINDER ASSY. (ALERT) ....................... 1 ......... INCLUDES ITEMS W/ * SWITCH ASSY., OIL LEVEL 1 SHAFT, GOVERNOR ARM 1 BOLT, DRAIN PLUG 2 WASHER (8.2X17X0.
HONDA GX390K1QWT2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 102 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. NO. 1 2 * 3 * 4 * 5 6 7 8 10 11 12 13 14 16 17 18 18 PART NO. 12200ZF6W01 12204ZE2306 12205ZE2305 12216ZE2300 12251ZF6W00 12310ZE3791 12315ZE3840 12391ZE2020 17316611000 90014ZE2000 90042ZE8000 92900080320E 90441ZE2010 9430112200 957011008000 9807955846 9807956846 PART NAME QTY. REMARKS CYLINDER HEAD .............................................1 ................ INCLUDES ITEMS W/ * GUIDE, VALVE (OS) (OPTIONAL) 1 GUIDE, EX.
HONDA GX390K1QWT2 ENGINE — FAN COVER ASSY. FAN COVER ASSY. PAGE 104 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — FAN COVER ASSY. FAN COVER ASSY. NO. 4 7 10 13 15 PART NO. 16731ZE2003 19610ZE3010ZB 19631ZE3W00 36100ZH7003 90013883000 PART NAME CLIP, TUBE COVER, FAN *NH1* (BLACK) SHROUD SWITCH ASSY., ENGINE STOP BOLT, FLANGE (6X12) (CT200) QTY. 1 1 1 1 6 REMARKS SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. PAGE 106 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. NO. 1 3 7 10 11 PART NO. 19511ZE3000 28450ZE3W11 31100ZE3701 90201ZE3V00 90741ZE2000 PART NAME FAN, COOLING PULLEY, STARTER (SCREEN GRID) FLYWHEEL NUT, SPECIAL (16MM) (1) KEY, SPECIAL WOODRUFF (25X18) QTY. 1 1 1 1 1 REMARKS SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 108 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. NO. 1 3 6 8 9 * 15 17 18 20 22 PART NO. 16854ZH8000 16955ZE1000 17510ZE3010ZB 17620ZH7023 17631ZH7003 91353671003 9405008000 950014500360M 9500202080 957010802500 PART NAME QTY. REMARKS RUBBER, SUPPORTER (107MM) 1 JOINT, FUEL TANK 1 TANK, FUEL *NH1* (BLACK) 1 CAP, FUEL FILLER ................................................ 1 ......... INCLUDES ITEM W/ * GASKET, FUEL FILLER CAP 1 O-RING (13.5X1.5) (ARAI) 1 NUT, FLANGE (8MM) 2 BULK HOSE, FUEL (4.
HONDA GX390K1QWT2 ENGINE — IGNITION COIL ASSY. IGNITION COIL ASSY. PAGE 110 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — IGNITION COIL ASSY. IGNITION COIL ASSY. NO. 1 2 8 12 17 18 PART NO. 30500ZF6W01 30700ZE1013 31512ZE2000 36101ZE2701 90015883000 90684ZA0601 PART NAME COIL ASSY., IGNITION CAP ASSY., NOISE SUPPRESSOR GROMMET, WIRE WIRE, STOP SWITCH (430MM) BOLT, FLANGE (6X28) CLIP, WIRE HARNESS QTY. 1 1 1 1 2 1 REMARKS SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — MUFFLER ASSY. MUFFLER ASSY. PAGE 112 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — MUFFLER ASSY. MUFFLER ASSY. NO. 2 3 5 6 7 8 9 10 19 22 27 28 31 PART NO. 18310ZE2W61 18320ZE2W61 18330ZE2W00 18331ZE3810 18333ZF6W01 18355ZE2W00 18381ZE2W10 18381ZE2800 90050ZE1000 90055ZE1000 90006ZE2000 9405008000 90055ZE1000 PART NAME QTY. MUFFLER 1 PROTECTOR, MUFFLER 1 PIPE, EX. 1 CAP, MUFFLER 1 GASKET, EX.
HONDA GX390K1QWT2 ENGINE — PISTON ASSY. PISTON ASSY. PAGE 114 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — PISTON ASSY. PISTON ASSY. NO. 1 1 1 1 1 2 2 2 2 3 4 4 5 * 6 PART NO. 13010ZF6003 13011ZF6003 13012ZF6003 13012ZF6005 13013ZF6003 13101ZF6W00 13102ZF6W00 13103ZF6W00 13104ZF6W00 13111ZF6W00 13200ZE3010 13200ZE3315 90001ZE8000 90601ZE3000 PART NAME QTY. REMARKS RING SET, PISTON (STD) 1 RING SET, PISTON (OS 0.25) (OPTIONAL) 1 RING SET, PISTON (OS 0.50) (OPTIONAL) 1 RING SET, PISTON (OS 0.50) (OPTIONAL) 1 RING SET, PISTON (0.75) (NIPPON) 1 PISTON (STD) 1 PISTON (OS 0.
HONDA GX390K1QWT2 ENGINE — RECOIL STATER ASSY. RECOIL STARTER ASSY. PAGE 116 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — RECOIL STATER ASSY. RECOIL STARTER ASSY. NO. 1 2 * 3 * 4 * 5 * 6 * 7 * 8 * 10 * 11 * 13 * 14 PART NO. 28400ZE3W01ZB 28410ZE3W01ZB 28421ZE3W01 28422ZE2W01 28441ZE2W01 28442ZE2W01 28443ZE2W01 28444ZE2W01 28461ZE2W02 28462ZV7003 90004ZE2W01 90008ZE2003 PART NAME QTY. REMARKS STARTER ASSY., RECOIL *NH1* (BLACK) .............. 1 ......
HONDA GX390K1QWT2 ENGINE — LABELS ASSY. LABELS ASSY. PAGE 118 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — LABELS ASSY. LABELS ASSY. NO. 2 4 7 9 12 13 PART NO. 87521ZF6W01 87522ZH9000 87528ZE2810 87532ZH8810 87534ZE1841 87535ZE1840 PART NAME EMBLEM LABEL, CAUTION MARK, CHOKE (EXTERNAL) MARK, OIL ALERT (E) LABEL, AIR CLEANER CAUTION MARK, AIR CLEANER SALES POINT QTY. 1 1 1 1 1 1 REMARKS SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. PAGE 120 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. NO PART NO 1 17200ZJ0U70 2 17207ZJ0U70 3 17208ZJ0U70 4 17209ZJ0U70 5 * 17210759013 17230759003 6 * 17232891000 7 8* 17251ZJ0U70 9 17253759003 * 17255758000 10 11 17320ZG5801 * 12 * 17330ZG5801 13 * 90113759003 14 * 90203ZA0800 15 90502759003 * 16 95018750250 17# 935000402100A 18+ 93500040250G 19 957010601200 PART NAME QTY. REMARKS AIR CLEANER ASSY. .................................. 1 ................
HONDA GX620TXF2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. PAGE 122 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY.
HONDA GX620TXF2 ENGINE — CONTROL ASSY. CONTROL ASSY. PAGE 124 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — CONTROL ASSY. CONTROL ASSY. NO PART NO 1 16263ZE3790 3 16500ZJ1000 5 16534ZJ1000 7 16550ZJ1000 8 16555ZJ1000 9 16561ZG1000 10* 16561ZJ1000 11 16562ZJ1000 12 16570ZJ1000 * 16574ZE1000 13 * 16575ZH8000 14 * 16578ZE1000 16 * 16584883300 17 * 16628ZJ1000 22 23* 16649ZJ1000 24 17951ZG1000 25* 90013883000 26 90015ZE3790 27 * 90114SA0000 30 93500050120H * 31 * 93500050250H 34 94001050000S 35* 9405006000 PART NAME QTY. REMARKS JOINT, ROD 1 CONTROL ASSY. ....................................
HONDA GX620TXF2 ENGINE — CONTROL BOX ASSY. CONTROL BOX ASSY. PAGE 126 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — CONTROL BOX ASSY. CONTROL BOX ASSY. NO PART NO 1 * 31612ZE2003 2 31614ZE2003 3* 31620ZG5003 5 32103759000 6 29153-501 7 32340ZJ1812 8 32345ZJ1811 9* 29054-001 10 * 32902892003 11 * 35100ZJ1812 12 # 35111880003 13* 36103ZE1000 14 87529ZE2860 * 15 16 17 18 19* 20 21 22 24 # * 90380MA6010 90676SA8003 91408ZJ1810 93500040120H 94001043900S 9411104800 957010601000 957010601200 9820032500 PART NAME QTY. REMARKS CASE, CONTROL 1 BRACKET, CASE MOUNTING 1 RECTIFIER ASSY.
HONDA GX620TXF2 ENGINE — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. PAGE 128 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. NO PART NO PART NAME QTY. REMARKS 1 11300ZJ1600 COVER ASSY., CRANKCASE ..... 1 ............. INCLUDES ITEMS W/ * 2 11381ZJ1000 GASKET, CASE COVER 1 4 BEARING A, MAIN OPTIONAL ... 1 ............. SEE HONDA SERVICE MANUAL * 13321ZJ1000 4 13322ZJ1000 BEARING B, MAIN OPTIONAL ... 1 ............. SEE HONDA SERVICE MANUAL * 13323ZJ1000 BEARING C, MAIN OPTIONAL ... 1 ............. SEE HONDA SERVICE MANUAL 4 5* 15120ZJ1000 COVER ASSY.
HONDA GX620TXF2 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PAGE 130 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. NO PART NO 1 13310ZJ0U60 4 90401ZJ1000 PART NAME CRANKSHAFT, T-TYPE WASHER, CRANKSHAFT THRUST QTY. 1 1 REMARKS SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. PAGE 132 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. NO PART NO 1 12000ZJ1810 2 12356ZJ1000 3 12358ZJ1000 4 12372ZE2300 13321ZJ1000 5 * 5 * 13322ZJ1000 5 13323ZJ1000 7* 15400P0H305PE 9 15558ZJ1010AH 10 25523VD6010 11 31511ZJ1000 12 35480ZJ1812 16 90018PN3000 17 90029888000 18 90031ZE1000 20 91201ZJ1003 22* 91353671003 23 9280014000 24 9405010000 25 9410914000 26 957010607509 27 961406003010 PART NAME QTY. REMARKS CYLINDER ASSY. ........................... 1 .........
HONDA GX620TXF2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 134 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. NO PART NO 1 12210ZJ1000 2 12220ZJ1000 3 12205ZE2305 * 4 12216ZE2300 5* 12251ZJ1003 6 12311ZJ1000 7 12314ZJ1000 8 1239ZJ1000 9 15611921000 10 17101ZJ1000 11 17151ZJ1003 12 90121ZJ1000 13 91301805000 14 92900080250B 15 9430112200 16 957010603200 17 957011007500 18 957011013000 19 9807956846 PART NAME QTY. REMARKS CYLINDER HEAD, R. ................................... 1 ......... INCLUDES ITEMS W/ * CYLINDER HEAD, L. ............................
HONDA GX620TXF2 ENGINE — FAN COVER ASSY. FAN COVER ASSY. PAGE 136 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — FAN COVER ASSY. FAN COVER ASSY. NO PART NO 1 19611ZJ1000ZB 4 19612ZJ1000 5 19641ZJ1000 6 19615ZJ0U60 6 19615ZJ0U70 7 19618ZJ0U70 8 19631ZJ1000 9 19632ZJ1000 11 33713GC2000 12 90013883000 13 90018ZE1000 14 90042ZJ1000 15 90104GF6000 16 90113GE4000 17 90320MM5000 18 9405006000 19 957010600800 PART NAME COVER, FAN R8, BRIGHT RED PLATE, R SIDE PLATE, L SIDE HOOD, FAN COVER HOOD, FAN COVER PLUG, FAN COVER HOLE SHROUD, R. SHROUD, L.
HONDA GX620TXF2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. PAGE 138 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. NO PART NO 1 19511ZJ1000 2 19513ZJ1000 4 28452ZJ1811 6 28454ZJ1801 7 31110ZJ1801 9 90201ZG3000 10 90401ZG3000 11 90741ZE2000 12 957010801600 PART NAME FAN, COOLING PLATE, COOLING FAN START GRID, SCREEN P.T.O. HOLDER, SCREEN GRID OPTIONAL FLYWHEEL NUT, FLANGE 20MM WASHER, 20MM KEY, SPECIAL WOODRUFF 25X18 BOLT, FLANGE 8X16 QTY. 1 1 1 1 1 1 1 1 4 REMARKS SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — IGNITION COIL ASSY. IGNITION COIL ASSY. PAGE 140 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — IGNITION COIL ASSY. IGNITION COIL ASSY. NO PART NO 1 30500ZJ1013 2 30518ZJ1000 3 30550ZJ1013 4 30700ZJ1003 6 31630ZJ1801 7 31740ZJ1003 8 63312ZA7000 * 10 90031ZE1000 11 90121952000 12 90658SA0003 13 90673GJ5003 14 915047540003 15 957010600800 PART NAME QTY. REMARKS COIL ASSY., R. IGNITION 1 GROMMET, IGNITION WIRE 2 COIL ASSY., L. IGNITION 1 CAP ASSY., NOISE SUPPRESSOR 2 COIL ASSY., CHARGHE 1 DIODE ASSY., ENGINE STOP .................... 1 .........
HONDA GX620TXF2 ENGINE — MUFFLER ASSY. MUFFLER ASSY. PAGE 142 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — MUFFLER ASSY. MUFFLER ASSY. NO PART NO 1 06183ZJ1821 2 18310ZJ1003 * 3 * 18321ZJ1003 4 * 18330ZJ1600 5 * 18338ZJ1003 6 18396ZJ1003 * 7 * 957010600800 8 * 957010801400 9 957010802000 * PART NAME QTY. REMARKS MUFFLER KIT, HIGH-B OPTIONAL ............. 1 ......... INCLUDES ITEMS W/ * MUFFLER, HIGH OPTIONAL 1 PROTECTOR, MUFF., HIGH OPTIONAL 1 PIPE, EX. HIGH-L OPTIONAL 1 STAY, MUFFLER, HIGH OPTIONAL 1 BAND ASSY.
HONDA GX620TXF2 ENGINE — PISTON & CONNECTING ROD ASSY. PISTON AND CONNECTING ROD ASSY. PAGE 144 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — PISTON & CONNECTING ROD ASSY. PISTON AND CONNECTING ROD ASSY. NO PART NO PART NAME QTY. REMARKS 1 13010ZE8601 RING SET, PISTON STANDARD 2 1 13011ZE8601 RING SET, PISTON OS 0.25 ............................ 2 ....... OPTIONAL 1 13012ZE8601 RING SET, PISTON OS .050 ............................ 2 ....... OPTIONAL 1 13013ZE8601 RING SET, PISTON OS .075 ............................ 2 ....... OPTIONAL 2 13101ZJ1000 PISTON 2 2 13102ZJ1000 PISTON, OS 0.25 ...................................
HONDA GX620TXF2 ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 146 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. NO PART NO 2 15282 3 17510ZE3010ZB 4 17560ZJ0U70 5 17620ZH7023 6 17631ZH7023 7 29219-001 8 90018ZE1000 9 90022888010 10 15229 12 9405008000 13 6004 15 22994-010 16 29066-001 17 957010801600 18 957010802500 19 957010803000 PART NAME JOINT, FUEL TANK FUEL TANK SUPPORT, FUEL TANK CAP, FUEL GASKET, FUEL FILLER CAP COLLAR, FR. ENGINE HANGER BOLT, FLANGE (6X23) BOLT, FLANGE (6X20) O-RING (13.5X1.
HONDA GX620TXF2 ENGINE — FUEL PUMP ASSY. FUEL PUMP ASSY. PAGE 148 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — FUEL PUMP ASSY. FUEL PUMP ASSY. NO PART NO 2 16700ZJ1003 3 16711ZJ1800 5 16910ZE8015 7 19905ZA8701 8 35806752630 9 90617SA0003 10 950014500360M 11 950015500840M 12 950015500840M 13 9500202080 14 950024105008 15 950033600310M 16 957010600800 17 957010601400 PART NAME QTY. REMARKS PUMP ASSY., FUEL 1 STAY, FUEL PUMP 1 FILTER, FUEL 1 GROMMET, WIRE 1 BASE, CLIP 1 CLIP, WIRE HARNESS 1 BULK HOSE, FUEL 4.5X3000 X 4.5X110 1 BULK HOSE, FUEL 5.5X8000 X 5.5X195 1 BULK HOSE, FUEL 5.5X8000 X 5.
HONDA GX620TXF2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. PAGE 150 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY.
HONDA GX620TXF2 ENGINE — STARTER MOTOR ASSY. STARTER MOTOR ASSY. PAGE 152 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — STARTER MOTOR ASSY. STARTER MOTOR ASSY. NO PART NO 1 31200ZJ1004 2 31243ZJ1800 3 32402ZJ1810 4+ 32411KB9930 5+ 32411402000 6 35850ZJ1811 7 94050060000 8+ 9407006080 9 9430110120 10 957010811000 11 31213ZJ1004 * 31217ZJ1004 12 * 31225ZJ1004 13 * 31226ZJ1004 14 * 31231ZJ1004 15 * 31235ZJ1004 16 * 31237ZJ1004 17 * 31281ZJ1004 18 * 90407ZJ1004 19 * PART NAME QTY. REMARKS MOTOR ASSY., STARTER ................................ 1 ...........
HONDA GX620TXF2 ENGINE — GASKET KIT ASSY. GASKET KIT ASSY. NO ARTWORK AVAILABLE PAGE 154 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — GASKET KIT ASSY. GASKET KIT ASSY. NO PART NO 1 061A1ZJ1000 2 12251ZJ1003 * 3 * 12358ZJ1000 4 * 12391ZJ1000 5 * 16221ZG8000 171541ZJ1003 6 * 7 * 17228ZG8003 8 * 18333ZJ1000 91301805000 9 * PART NAME QTY. REMARKS GASKET KIT ............................................... 1 ......... INCLUDES ITEMS W/ * GASKET, CYLINDER HEAD 2 GASKET, BREATHER COVER 1 GASKET, HEAD COVER 2 GASKET, CARBURETOR 2 GASKET, IN. MANIFOLD 2 GASKET, AIR CLEANER 1 GASKET, EX. PIPE 2 O-RING, 26X2.
HONDA GX620TXF2 ENGINE — LABELS ASSY. LABEL ASSY. PAGE 156 — SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — LABELS ASSY. LABEL NO 1 2 4 5 6 7 ASSY. PART NO 87101ZJ1000 87152ZJ1000 87522ZJ1000 22994-012 22994-013 87532ZH8810 PART NAME MARK, EMBLEM, GX620 LABEL, SPECIFICATION GX620 LABEL, CAUTION LABEL READ OWNER’S MANUAL LABEL, GAS TANK (MATCH/FLAME) MARK, OIL ALERT( E) QTY. 1 1 1 1 1 1 REMARKS SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
TERMS AND CONDITIONS OF SALE — PARTS PAYMENT TERMS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Multiquip reserves the right to quote and sell direct to Government agencies, and to Original Equipment Manufacturer accounts who use our products as integral parts of their own products. a. SPECIAL EXPEDITING SERVICE Terms of payment for parts are net 30 days.
NOTES SP213H20A / SP2S20H20A SAWS — OPERATION AND PARTS MANUAL — REV.
OPERATION AND PARTS MANUAL HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING UNITED STATES Multiquip Corporate Office 18910 Wilmington Ave. Carson, CA 90746 Contact: mq@multiquip.com MQ Parts Department Tel. (800) 421-1244 Fax (800) 537-3927 Mayco Parts 800-427-1244 310-537-3700 Fax: 800-672-7877 Fax: 310-637-3284 Warranty Department 800-306-2926 310-537-3700 Fax: 800-672-7877 Fax: 310-637-3284 Service Department 800-421-1244, Ext. 279 310-537-3700, Ext.
