OPERATION AND PARTS MANUAL SERIES HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL (HONDA GX240K1QA2 GASOLINE ENGINE) Revision #3 (07/06/10) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
HPLA/HPHA-SERIES 36" TROWEL— PROPOSITION 65 WARNING Engine exhaust and some of its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Some examples of these chemicals are: Leadfromlead-basedpaints. Crystallinesilicafrombricks. Cementandothermasonryproducts. Arsenicandchromiumfromchemically treatedlumber.
NOTES HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV.
HPLA/HPHA-SERIES 36" TROWEL— TABLE OF CONTENTS Here's How To Get Help ............................................ 3 Table Of Contents ..................................................... 4 Parts Ordering Procedures ....................................... 5 Training Checklist ...................................................... 6 Daily Pre-Operation Checklist ................................... 7 Safety Message Alert Symbols .............................. 8-9 Rules For Safe Operation ....................
www.multiquip.com HPLA/HPHA-SERIES 36" TROWEL— PARTS ORDERING PROCEDURES Ordering parts has never been easier! Choose from three easy options: Order via Internet (Dealers Only): Best Deal! Effective: January 1st, 2006 If you have an MQ Account, to obtain a Username and Password, E-mail us at: parts@multiquip. com.
HPLA/HPHA-SERIES 36" TROWEL— TRAINING CHECKLIST TRAINING CHECKLIST This checklist will lists some of the minimum requirements for machine maintenance and operation. Please feel free to detach it and make copies. Use this checklist whenever a new operator is to be trained or it can be used as a review for more experienced operator’s. TRAINING CHECKLIST NO. DESCRIPTION 1 Read Operator’s Manual completely. 2 Machine layout, location of components, checking of engine and gearbox fluid level.
HPLA/HPHA-SERIES 36" TROWEL— DAILY PRE-OPERATION CHECKLIST DAILY PRE-OPERATION CHECKLIST DAILY PRE-OPERATION CHECKLIST 1 Engine Oil Level. 2 Gearbox Fluid Level. 3 Condition of Blades. 4 Blade Pitch Operation. 5 Safety Stop Switch Operation. 6 V-Belt Clutch Operation. COMMENTS: HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV.
HPLA/HPHA-SERIES 36" TROWEL- SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others. NOTE This Owner's Manual has been developed to provide complete instructions for the safe and efficient operation of the MultiQuip HPLA/HPHA-SERIES 36" WALKBEHIND TROWEL.
HPLA/HPHA-SERIES 36" TROWEL- SAFETY MESSAGE ALERT SYMBOLS Accidental Starting ALWAYS place the engine ON/OFF switch in the OFF position, when the trowel is not in use. Over Speed Conditions NEVER tamper with the factory settings of the engine governor or settings. Personal injury and damage to the engine or equipment can result if operating in speed ranges above maximum allowable. Respiratory Hazard ALWAYS wear approved respiratory protection.
HPLA/HPHA-SERIES 36" TROWEL— RULES FOR SAFE OPERATION CAUTION: Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the HPLA/HPHA-SERIES 36" walk-behind trowel. SAFETY ■ DO NOT operate or service this equipment before reading this entire manual.
HPLA/HPHA-SERIES 36" TROWEL— RULES FOR SAFE OPERATION ■ DO NOT operate this trowel unless all guards and safety devices are attached and in place. See pages 16 and 17. ■ ALWAYS use proper lifting techniques when moving the trowel. See page 24. ■ ALWAYS check to make sure that the operating area is clear before starting the engine. ■ ALWAYS test the safety stop switch devices before operating the trowel. ■ NEVER place your feet or hands inside the guard rings while starting or operating this equipment.
HPLA/HPHA-SERIES 36" TROWEL— OPERATION AND SAFETY DECALS Machine Safety Decals The HPLA/HPHA-SERIES 36" walk-behind trowel is equipped with a number of safety decals. These decals are provided for operator safety and maintenance information. Figure 1 below illustrates these decals as they appear on the machine. Should any of these decals become unreadable, replacements can be obtained from your dealer. CAUTION WARNING! DO NOT LIFT MACHINERY BY GUARD RING.
HPLA/HPHA-SERIES 36" TROWEL— SPECIFICATIONS (TROWEL) Side View Figure 2. HPLA/HPHA-SERIES 36" Trowel Dimensions Table 1. HPLA/HPHA-Series 36" Trowel Specifications A– Height (Lifting Hook) 36.7 in (931.6 mm) B– Height Engagement Lever) 41.4 in (1,044.2 mm) 36.5 (927.1 mm) C–Width 70.5 (1,789.4 mm) D–Length Weight – Operating 174 lbs./79.1 Kg. Sound Pressure 94 db Vibration 2.0g (19.6 m/s2) Ring Diameter 36.5 in (92.7 cm) Number of Blades 4 Blade Tip Speed – FPM (m/s) 1,182 fpm (6.
HPLA/HPHA-SERIES 36" TROWEL— SPECIFICATIONS (ENGINE) Table 2. Specifications (Engine) Model HONDA GX240K1QA2 Type Air-cooled 4 stroke, Single Cylinder, OHV, Horizontal Shaft Gasoline Engine Bore X Stroke 2.9 in. x 2.3 in. (73 mm x 58 mm) Displacement 14.81 cu-in. (242cc) Max Output 8.0 H.P./3600 R.P.M. Fuel Tank Capacity Fu e l Lube Oil Capacity Speed Control Method Star ting Method Dimension (L x W x H) Dry Net Weight 1.59 U.S. gal. (6 liters) Unleaded Automobile Gasoline 1.16 U.S. qt. (1.
HPLA/HPHA-SERIES 36" TROWEL— GENERAL INFORMATION HPLA/HPHA-SERIES Familiarization 36" Walk-Behind Trowel This walk-behind trowel is designed for the floating and finishing of concrete slabs. Take a walk around the trowel. Take notice of all the major components (see Figure 3, pages 16 and 17) like the engine, blades, quick pitch control, air cleaner, centrifugal stop switch etc. Check that there is always oil in the engine. Read all the safety instructions carefully.
HPLA/HPHA-SERIES 36" TROWEL— CONTROLS AND COMPONENTS Figure 3. HPLA/HPHA-SERIES 36" WalkBehind Trowels PAGE 16 — HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HPLA/HPHA-SERIES 36" TROWEL— CONTROLS AND COMPONENTS (Figures 3) shows the location of the basic controls or components, for the HPLA/HPHA-SERIES 36" trowel. Listed below is a brief explanation of each control or component 1. Quick Pitch™ Control Handle – To adjust the pitch of the blades, grasp the handle then squeeze and either move the handle forward or backward to achieve the desired blade pitch. 2.
HPLA/HPHA-SERIES 36" TROWEL— BASIC ENGINE Figure 4. Engine Controls and Components INITIAL SERVICING The engine (Figure 4) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers engine manual for instructions & details of operation and servicing. 6. Choke Lever – Used in the starting of a cold engine, or in cold weather conditions. The choke enriches the fuel mixture. 1. 7. Air Cleaner – Prevents dirt and other debris from entering the fuel system.
HPLA/HPHA-SERIES 36" TROWEL — ASSEMBLY AND INSTALLATION Assembly and Installation Before the trowel can be put into operation there are some components that must be installed before the trowel can be used. This section provided general instructions on how to install those components. Instruction sheet P/N 20485 provides further details for the handle assembly. Handle Tube Installation (All Models) 1. Install the handle tube to the gearbox as shown in (Figure 5).
HPLA/HPHA-SERIES 36" TROWEL — ASSEMBLY AND INSTALLATION 4. Tighten cable clamp screw and swivel stop screw. 5. After the cable has been installed on the engine, adjust and tighten operator position of the handle to lock the throttle cable at the proper length. 6. Adjust cable tension loosening the lock nut on the throttle cable receiver (Figure 9), loosening or tightening the adjuster nut below it, then retightening the lock nut. Figure 9. Throttle Adjust 7. These are general instructions.
HPLA/HPHA-SERIES 36" TROWEL — ASSEMBLY AND INSTALLATION Pre-load Adjustment (Quick-Pitch™ Models Only) 2. 3. 4. Lock the spring in the compressed position, by releasing the blade pitch adjustment trigger, (Quick-Pitch™ model). Remove one brass set nut from the blade pitch cable end as shown in (Figure 13). 1. After the Quick-Pitch™ handle has been installed on the trowel, spring pre-load adjustment will be required. 2. Locate the adjustment screw on the underside of the handle tube (Figure 15).
HPLA/HPHA-SERIES 36" TROWEL— PRE-INSPECTION CAUTION NEVER operate the trowel in a confined area or enclosed area structure that does not provide ample free flow of air. ALWAYS wear approved eye and hearing protection before operating the trowel. NEVER place hands or feet inside the guard rings while the engine is running. ALWAYS shut the engine down before performing any kind of maintenance service on the trowel. Figure 16. Engine Oil Dipstick (Removal) 3.
HPLA/HPHA-SERIES 36" TROWEL— PRE-INSPECTION Blade Check Explosive Fuel Fuel Check Motor fuels are highly flammable and can be dangerous if mishandled. DO NOT smoke while refueling. DO NOT attempt to refuel the trowel if the engine is hot! or running. 1. Remove the gasoline cap located on top of fuel tank. 2. Visually inspect to see if fuel level is low. If fuel is low, replenish with unleaded fuel. Check for worn or damaged blades. Check to see if one blade is worn out while the others look new.
HPLA/HPHA-SERIES 36" TROWEL — INITIAL START-UP CAUTION The trowel is heavy and awkward to move around. Use proper heavy lifting procedures and DO NOT lift the trowel by the guard rings. LIFTING THE TROWEL ONTO THE SLAB. Auxiliary Lifting Tube Remove the auxiliary lifting tube located on top of the main handle. Insert the tube into the socket located on the opposite side of the gearbox (Figure 20) from the handle. Make sure that the hole in the tube engages with the pin in the socket.
HPLA/HPHA-SERIES 36" TROWEL — INITIAL START-UP 3. Place the centrifugal safety stop switch (Figure 23) in the "ON" position. 6. If the engine has started, slowly return the choke lever (Figure 24) to the OPEN position. If the engine has not started repeat steps 1 through 5. 7. Before the trowel is placed into operation, run the engine for several minutes. Check for fuel leaks, and noises that would associate with a loose guard ring and/or covers. 8. Test the Safety Stop Switch. a. Figure 23.
HPLA/HPHA-SERIES 36" TROWEL — OPERATION The following steps are intended as a basic guide to machine operation, and are not to be considered a complete guide to concrete finishing. We suggest that all operators (experienced and novice) read “Slabs on Grade” published by the American Concrete Institute, Detroit, Michigan. Read the “Training” section of this manual for more information. PITCHING THE BLACES Quick Pitch Handle 1.
HPLA/HPHA-SERIES 36" TROWEL — OPERATION (Figure 30) below illustrates a typical walk-behind trowel application. Practice maneuvering the trowel. The trick is to let the trowel do the work. Continue to practice maneuvering the trowel. Try to practice as if you were finishing a slab of concrete. Practice edging and covering a large area. Remember a good finishing technique is to work backwards. Be careful when moving backwards so that hazards can be avoided.
HPLA/HPHA-SERIES 36" TROWEL — OPTIONS Clip-On Float Blades (Optional) Blades Blades should be changed when they fail to finish concrete in a satisfactory manner. NOTE Blades are a vital part of finishing concrete. This trowel, or finisher, has been designed to finish concrete and the blades are built to stringent quality standards out of the finest trowel steel.
HPLA/HPHA-SERIES 36" TROWEL — OPTIONS Grinding Attachments Trowel Arm Adjustment Tool Available grinding attachments are used for grinding surface imperfections or joints.These attachments allow greater utilization of your trowel. (Figure 35) illustrates a typical grinding disk assembly, complete with hub and stone mounting plate. If blades show uneven wear patterns or some tend to wear out faster than others, the trowel arms may need to be adjusted.
HPLA/HPHA-SERIES 36" TROWEL — MAINTENANCE (ENGINE) QP40TH — MAINTENANCE (ENGINE) Engine Maintenance Perform engine maintenance procedures as referenced by Table 4 below: Table 4. Engine Maintenance Schedule DESCRIPTION (3) OPERATION BEFORE CHECK X FIRST EVERY MONTH 3 MONTHS OR OR 10 HRS. 25 HRS. EVERY 6 MONTHS OR 50 HRS. EVERY YEAR OR 100 HRS. EVERY 2 YEARS OR 200 HRS.
HPLA/HPHA-SERIES 36" TROWEL — MAINTENANCE (ENGINE) Maintenance DANGER : Perform the engine maintenance procedures as indicated below: DAILY ■ Thoroughly remove dirt and oil from the engine and control area. Clean or replace the air cleaner elements as necessary. Check and retighten all fasteners as necessary. Check the spring box and bellows for oil leaks. Repair or replace as needed. WEEKLY ■ Remove the fuel filter cap and clean the inside of the fuel tank.
HPLA/HPHA-SERIES 36" TROWEL — MAINTENANCE See the engine manual supplied with your machine for appropriate engine maintenance schedule and troubleshooting guide for problems. NOTE At the front of the book (Page 7) there is a “Daily Pre-Operation Checklist ”. Make copies of this checklist and use it on a daily basis. CAUTION! ALWAYS allow the engine to cool before servicing. NEVER attempt any maintenance work on a hot! engine. MAINTENANCE SCHEDULE Daily (8-10 Hours) 1.
HPLA/HPHA-SERIES 36" TROWEL — MAINTENANCE 2. Start engine, and bring trowel blades up to full speed and look for the following conditions: ■ Does the trowel have a perceived rolling or bouncing motion when in use? ■ Look at the trowel while it is running, does the guard ring “rock up and down” relative to the ground? Spider Removal 1. Once it is determined that an adjustment is required, remove the spider assembly from the gearbox shaft as follows: a.
HPLA/HPHA-SERIES 36" TROWEL — MAINTENANCE Trowel Blade Removal 1. Remove the trowel blades from the trowel arm by removing the three hex head bolts (Figure 46) from the trowel arm. Set blades aside. 3. If the trowel arm is found to be uneven or bent, replace the trowel arm. A bent trowel will not allow the trowel to operate in a smooth fluid rotation. 4. Next, check each of the six sides of the round machined shaft section of the trowel arm.
HPLA/HPHA-SERIES 36" TROWEL — MAINTENANCE 2. Trowels manufactured prior to June of 1982 require that the distance from the end of the adjusting bolt and the fixture arm must be 7/8" (Figure 45). Conversely, trowels manufactured after June of 1982 require that the distance from the end of the adjusting bolt and the fixture arm must be 1/2". 10. Reinstall lower wear plate, thrust collar and upper wear ring in the reverse order that they were dis-assembled onto the spider shaft.
HPLA/HPHA-SERIES 36" TROWEL — MAINTENANCE Changing The V- Belt 1. Unscrew the two (2) t-bolts from the belt guard and remove the lockwashers.(Figure 49). Figure 49. Removing The Belt Guard 2. Work belt around and off the bottom pulley and remove belt. 3. Replace with the appropriate belt for your machine: HPLA36 uses p/n 0261 (A-31) HPHA36 uses p/n 0152 3 (A-28) 4. Place the belt in the groove of the upper pulley then work the belt over the bottom pulley into place.
HPLA/HPHA-SERIES 36" TROWEL — TROUBLESHOOTING (TROWEL) TABLE 5. TROWEL TROUBLESHOOTING SYMPTOM Engine running rough or not at all. Safety switch not functioning. If trowel “bounces, rolls concrete, or makes uneven swirls in concrete”. Machine has a perceptible rolling motion while running. POSSIBLE PROBLEM SOLUTION Safety switch malfunction? Make sure that the safety switch is ON or replace switch if necessary. Fuel? Look at the fuel system. Make sure there is fuel being supplied to the engine.
HPLA/HPHA-SERIES 36" TROWEL — TROUBLESHOOTING (TROWEL) TABLE 5. TROWEL TROUBLESHOOTING (CONTINUED) SYMPTOM Clutch slipping or sluggish response to engine speed change. POSSIBLE PROBLEM SOLUTION Worn V-belts? Replace V-belt. Dir ty centrifugal clutch? Disassemble and clean clutch. Defective or worn out centrifugal clutch? Replace entire clutch. Worn bearings in gearbox? Rotate input shaft by hand. If shaft rotates with difficulty, check the input and output shaft bearings. Replace as necessary.
HPLA/HPHA-SERIES 36" TROWEL — TROUBLESHOOTING (ENGINE) TABLE 6. ENGINE TROUBLESHOOTING (CONTINUED) SYMPTOM POSSIBLE PROBLEM SOLUTION Difficult to start Fuel is available but spark plug will not ignite. (Power available at high tension cable). Fuel is available but spark plug will not ignite. (Power NOT available at high tension cable). Fuel is available and spark plug ignites (compression normal). Fuel is available and spark plug ignites (compression low ).
HPLA/HPHA-SERIES 36" TROWEL — EXPLANATION OF CODES The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. NOTICE The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availability of the parts listed. SAMPLE PARTS LIST NO. 1 2% 2% 3 4 PART NO. PART NAME QTY. REMARKS 12345 BOLT....................
HPLA/HPHA-SERIES 36" TROWEL — SUGGESTED SPARE PARTS HPLA/HPHA-SERIES 36" TROWEL 1 TO 3 UNITS WITH HONDA GX-240K1QA2 ENGINE. 1 to 3 Units Qty. ..... P/N .................. Description 1 ......... 20478 .............. GRIP, LEFT 1 ......... 20463 .............. GRIP, RIGHT 2 ......... 20856 .............. SAFETY SWITCH 1 ......... 20285 .............. CABLE STANDARD HANDLE 1 ......... 20297 .............. CABLE QUICK-PITCH™ 1 ......... 21172 .............. THROTTLE CABLE 1 ......... 21171 ..............
HPLA/HPHA-SERIES 36" TROWEL — NAMEPLATE AND DECALS NAMEPLATES AND DECALS PAGE 42 — HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HPLA/HPHA-SERIES 36" TROWEL — NAMEPLATE AND DECALS NAMEPLATE AND DECALS NO. 1 2 3 4 5 6 7 8 9 PART NO. 1758 12405 20527 20526 2942 1736 1735 11246 10 11 12 13 14 15 16 17 18 19 1940 11092 11246 1492 1147 11246 1261 1848 2938 11246 PART NAME QTY. REMARKS DECAL: QUICK-PITCH™ HANDLE 1 2 DECAL: QUICK-PITCH™ HANDLE INSERT DECAL: QUICK-PITCH™ WARNING 1 DECAL: QUICK-PITCH™ LATCH WARNING 1 DECAL: MQ WHITEMAN 13" 1 DECAL: ARROWS 1 DECAL: PRE-LOAD INDICATOR 1 DECAL: OIL CHECK .....................................
HPLA/HPHA-SERIES 36" TROWEL — STANDARD HANDLE ASSY. STANDARD HANDLE ASSY. 40 3 21 5 7 4 8 6 9 10 22 18 DETAIL “A” 17 43 16 14 3 12 42 15 19 2 20 44 SEE DETAIL “B” 21 22 11 SEE DETAIL “A” 1 13 24 23 39 27 30 31 32 25 26 41 ASM 38 37 28 1 36 45 35 29 33 2 DETAIL “B” 34 1 APPLY THREAD LOCK (LOCTITE 242 BLUE OR EQUIVALENT). 2 PART OF ENGINE ASSEMBLY. PAGE 44 — HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HPLA/HPHA-SERIES 36" TROWEL — STANDARD HANDLE ASSY. STANDARD HANDLE ASSY. NO. 1 2 3 PART NO. 20463 20774 20818 4 * 5 * 6 * 7 * 8 * 9 * 10 11 12 13 14 15 16 17 18 19 20 21■ 22 23 24 25# 26# 27# 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 20817 0281 20282 0122C 3615 1478 20478 12556 21171 20439 1492 20438 0786 0786A 20287 20285 20856 1602 20988 20514 1662 20275 1118 20279 21017 1493 12567 2942 21173 20845 1116 10133 20392 20280 20819 20301 20421 A8638 21172 PART NAME QTY.
HPLA/HPHA-SERIES 36" TROWEL — QUICK-PITCH™ HANDLE ASSY. QUICK-PITCH ™ T-HANDLE 2 3 25 55 6 5 1 18 20 19 26 21 14 58 4 10 24 25 17 8 26 16 10 60 23 SEE DETAIL “A” 7 9 DETAIL “A” 22 59 27 15 11 SEE DETAIL “B” 28 11 ASM 54 48 12 13 46 30 45 49 ASM 50 29 57 31 32 51 43 44 52 33 1 34 42 61 38 DETAIL “B” 40 41 47 2 39 37 36 35 56 53 1 APPLY THREAD LOCK (LOCTITE 242 BLUE OR EQUIVALENT). 2 PART OF ENGINE ASSEMBLY.
HPLA/HPHA-SERIES 36" TROWEL — QUICK-PITCH™ HANDLE ASSY. QUICK-PITCH ™ HANDLE NO. 1 2 3 4 5 6 7 8 * 9 * 10 * 11 12 * 13 * 14 15 16 17 18 19+ 20+ 21+ 22+ 23+ 24 25■ 26 27 28 29 30 31 32 33 34 35# 36# 37# 38 39 40 PART NO. 20463 20774 20478 12556 20526 21171 20527 20389 1746 12405 1729 1706 20437 4568 1711 1719 20439 20438 1731 20443 1709 20269 20276 20856 1602 20988 20514 20297 2942 1715 20270 1735 21017 1662 20275 1118 20279 1493 1737 1733 PART NAME QTY.
HPLA/HPHA-SERIES 36" TROWEL — QUICK PITCH™ HANDLE ASSY. QUICK PITCH HANDLE ASSY. 2 3 25 55 6 5 1 18 20 19 26 21 14 58 4 10 24 25 17 8 26 16 10 60 23 SEE DETAIL “A” 7 9 DETAIL “A” 22 59 27 15 11 SEE DETAIL “B” 28 11 ASM 54 48 12 13 46 30 45 49 ASM 50 29 57 31 32 51 43 44 52 33 1 34 42 61 38 DETAIL “B” 40 41 47 2 39 37 36 35 56 53 1 APPLY THREAD LOCK (LOCTITE 242 BLUE OR EQUIVALENT). 2 PART OF ENGINE ASSEMBLY.
HPLA/HPHA-SERIES 36" TROWEL — QUICK PITCH™ HANDLE ASSY. QUICK PITCH HANDLE ASSY. NO. 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 PART NO. 1736 1718 1732 1717 12642 1758 20845 21173 20392 10133 1116 20390 20293 20280 20421 A8638 20271 21172 PART NAME QTY. REMARKS DECAL, ARROW 1 NUT, QP TRIM CTRL ADJ 1 BOLT, STRIPPER 3/8 X 1/2 1 SCREW, QP TRIM ADJUSTMENT 1 TUBE, MAIN HANDLE 1 DECAL, PATENT QP 1 SWIVEL, ENGINE THROTTLE CABLE 1 HOUSING, THROTTLE CABLE 74” 1 DECAL, CAUTION, LIFT HANDLE .....
HPLA/HPHA-SERIES 36" TROWEL — 4-BLADE SPIDER ASSY. 4-BLADE SPIDER ASSY. PAGE 50 — HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HPLA/HPHA-SERIES 36" TROWEL — 4-BLADE SPIDER ASSY. 4-BLADE SPIDER ASSY. NO. 1 * 2 * 3 * 4 * 5% 6% 7% 8% 9% 10% 11% 12% 13% 14% 15% 16% 17% 18% 19% 20% 21 22 # * 23 PART NO. 12208 12778 10793 1154A 1157A 0164B 1875 1876 0105 0161C 1162A 2826 1163 4164 1316 1161 1322 1456 1167A 0166A 1215 1471 10968 PART NAME QTY. REMARKS WEAR RING 1 FLANGE BEARING 1 THRUST COLLAR ............................................................. 1 ...........
HPLA/HPHA-SERIES 36" TROWEL — GEARBOX & ENGINE MOUNTS ASSY. GEARBOX & ENGINE MOUNTS ASSY. 1 2 1 36 37 12 13 3 8 4 35 5 4 6 34 7 38 11 9 7 6 14 2 10 15 17 31 32 16 18 30 6 19 20 GEARBOX OIL 28 0Z. QTY. 1 19 33 39 GEARBOX ASSEMBLY 40 GASKET/SEAL KIT 41 BEARING KIT GEARBOX REQUIRES 28 OZ. OF LUBRICATING OIL FOR OPERATION. 18 32 31 22 1 APPLY THREAD LOCK (LOCTITE 242 BLUE OR EQUIVALENT). 2 APPLY SEALANT (LOCTITE 572 OR EQUIVALENT). 3 TORQUE TO 15 LB/FT.
HPLA/HPHA-SERIES 36" TROWEL — GEARBOX & ENGINE MOUNTS ASSY. GEARBOX & ENGINE MOUNTS ASSY. NO. 1% * 2% 3% 4% * 5% PART NO.
HPLA/HPHA-SERIES 36" TROWEL — GEARBOX & ENGINE MOUNTS ASSY. GEARBOX & ENGINE MOUNTS ASSY. 1 2 1 36 37 12 13 3 8 4 35 5 4 6 34 7 38 11 9 7 6 14 2 10 15 17 31 32 16 18 30 6 19 20 GEARBOX OIL 28 0Z. QTY. 1 19 33 39 GEARBOX ASSEMBLY 40 GASKET/SEAL KIT 41 BEARING KIT GEARBOX REQUIRES 28 OZ. OF LUBRICATING OIL FOR OPERATION. 18 32 31 22 1 APPLY THREAD LOCK (LOCTITE 242 BLUE OR EQUIVALENT). 2 APPLY SEALANT (LOCTITE 572 OR EQUIVALENT). 3 TORQUE TO 15 LB/FT.
HPLA/HPHA-SERIES 36" TROWEL — GEARBOX & ENGINE MOUNTS ASSY. GEARBOX & ENGINE MOUNTS ASSY. NO. 30 31 32 33 34 35 36 37 38 40 41 42 PART NO. 1150 20802 20803 20801 20797 1245 10700 1948 1247 20407 21046 21047 PART NAME QTY. REMARKS ARM, YOKE 1 RING, SNAP, TRUARC 5100-37 OR EQUIV. 2 SPACER, .50 OD X .40 ID X 0.25L 2 PIN, YOKE 1 STATIONARY GUARD RING 1 BUSHING, GUARD RING 4 FRONT ENGINE MOUNT 1 REAR ENGINE MOUNT 1 GROMMET 1/4 X .875 ID X 1-5/8 OD 4 GEARBOX ASSY. ...............................................
HPLA/HPHA-SERIES 36" TROWEL — ENGINE ASSY. ENGINE ASSY. PAGE 56 — HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HPLA/HPHA-SERIES 36" TROWEL — ENGINE HONDA ASSY. ENGINE ASSY. NO. PART NO. 1 1387 2 1391 3 0161C 4 0300B 5 20845 6 0310 7 1488 8 1475 9 1127 9 0740 10 0250 11 0261 11 152 3 12 1335 13 0181B 14 2577 15 1284 16 0166A 17 20982 18 1480 19 1949 20 1958 21 1245 22 1247 0252 23 * 0456 24 * 0251 25 * 0458 26 * B1766 27 * 0855 28 * 0253 29 * 1868 30 * 31 PART NAME QTY. REMARKS ENGINE 8HP HONDA 1 HHCS 5/16-24 x 1-1/2" 4 LOCK WASHER 5/16" 4 FLAT WASHER 5/16" 4 SWIVEL, THROTTLE CABLE 1 SQUARE KEY 1/4X1/4X1.
HPLA/HPHA-SERIES 36" TROWEL — GUARD RING ASSY. GUARD RING ASSY. 2 1 PAGE 58 — HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HPLA/HPHA-SERIES 36" TROWEL — GUARD RING ASSY. GUARD RING ASSY. NO. 1 2 PART NO. 20808 1940 PART NAME GUARD RING ASSEMBLY DECAL QTY. 1 1 REMARKS HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV.
HPLA/HPHA-SERIES 36" TROWEL — BLADES & ARM ADJ. FIXTURE ASSY. BLADES & ARM ADJUSTMENT FIXTURE ASSY. PAGE 60 — HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HPLA/HPHA-SERIES 36" TROWEL — BLADES & ARM ADJ. FIXTURE ASSY. BLADES & ARM ADJUSTMENT FIXTURE ASSY. NO. PART NO. PART NAME QTY. REMARKS 20 COMBO FLOAT & FINISH BLADE ................. 4 ........ CONTACT UNIT SALES DEPT./ACC. ITEM 20 ENDURO COMBO FLOAT &FINISH BLADE . 4 ........ CONTACT UNIT SALES DEPT./ACC. ITEM 21 FLOAT BLADE ............................................... 4 ........ CONTACT UNIT SALES DEPT./ACC. ITEM 22 FINISH BLADE ............................................... 4 ........
HPLA/HPHA-SERIES 36" TROWEL — LIFTING BAIL ASSY. (OPTION) LIFTING BAIL ASSY. (OPTION) PAGE 62 — HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HPLA/HPHA-SERIES 36" TROWEL — LIFTING BAIL ASSY. (OPTION) LIFTING BAIL ASSY. (OPTION) NO. PART NO. PART NAME QTY. REMARKS 1 LIFTING BAIL ASSY. ........................... 1 ............ CONTACT UNIT SALES DEPT./ACC. ITEM 2 10229 HHCS 5/16-24X1" 4 3 0161C LOCK WASHER 5/16" 4 4 LIFTING BAIL ASSY. ........................... 1 ............ CONTACT UNIT SALES DEPT. /ACC.
HONDA GX240K1QA2 ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. PAGE 64 — HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. NO. 1 2 3 * 5 6 8% 9% 10 13 14 15 PART NO. 16271ZE2000 17210ZE2822 17218ZE2505 17231ZH9820 17232891000 17238ZE2310 17239ZE1000 17410ZE2020 90325044000 90009ZE2003 9405006000 PART NAME QTY. REMARKS GASKET, ELBOW 1 ELEMENT, AIR CLEANER, DUAL ............. 1 ............. INCLUDES ITEMS W/ * FILTER, OUTER 1 COVER, AIR CLEANER 1 GROMMET, AIR CLEANER 1 COLLAR, AIR CLEANER 2 COLLAR B, AIR CLEANER 1 ELBOW COMP., AIR CLEANER ............... 1 .........
HONDA GX240K1QA2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. PAGE 66 — HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. NO. 1 2 3 4 5 6 * 7 8 9 10 11 12 13 14 15 PART NO. 14100ZE2W01 14410ZE2013 14431ZE2010 14441ZE2000 14451ZE1013 14568ZE1000 14711ZE2000 14721ZE2000 14751ZE2003 14771ZE2000 14773ZE2000 14781ZE2000 14791ZE2010 90012ZE0010 90206ZE1000 PART NAME QTY. REMARKS CAMSHAFT ASSY. ................................... 1 ............. INCLUDES ITEMS W/ * ROD PUSH 2 ARM VALVE ROCKER 2 LIFTER VALVE 2 PIVOT ROCKER ARM 2 SPRING, WEIGHT RETURN 1 VALVE, IN. 1 VALVE, EX.
HONDA GX240K1QA2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. PAGE 68 — HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. NO. 1 %+ * 2 * 3 * 5 * 6 + * 7 * 8 * 9 10 * 11 * 12 * 13 * 14 15 16 17 18 19 * 20 * 21 * 22 * 23 * 24 25■ 26 26 26 * 27 * 28 * PART NO.
HONDA GX240K1QA2 ENGINE — CONTROL ASSY. CONTROL ASSY. PAGE 70 — HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — CONTROL ASSY. CONTROL ASSY. NO. 1 2 3 4 5 8 10 * 11 * 12 * 13 * 14 * 15 * 16 * 17 * 19 20 21 24 * 26 * 27 PART NO. 16550ZE2700 16551ZE2000 16555ZE2000 16561ZE2000 16562ZE2000 16570ZE2W20 16571ZE2W00 16574ZE1000 16575ZE2W00 16576891000 16578ZE1000 16581ZE2W00 16584883300 16592883310 90013883000 90015ZE5010 90114SA0000 93500050280A 93500050160A 9405006000 PART NAME QTY.
HONDA GX240K1QA2 ENGINE — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. PAGE 72 — HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. NO. 2 3 4 5 8+ 9% 10 * 11 $ * 12 $ * 13 $ * 14 * 15 * 16 * 17 18 * 19 * 20 21 * 22 * PART NO. 11400ZE2601 11381ZE2801 15600ZG4003 15600735003 15625ZE1000 15625ZE1003 16510ZE2811 16511ZE2000 16512ZE2811 16513ZE2000 16531ZE2000 90473147000 90602ZE1000 90701HC4000 91201890003 9410106800 957010803500 961006202000 961006206000 PART NAME QTY. REMARKS COVER ASSY., CRANKCASE .................. 1 .............
HONDA GX240K1QA2 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PAGE 74 — HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. NO. 2 8 10 12 * PART NO. 13320ZE2601 13351ZE2010 90745ZE2600 961006206000 PART NAME QTY. REMARKS CRANKSHAFT COMP., Q- TYPE .............. 1 ............. INCLUDES ITEMS W/ * WEIGHT, BALANCER 1 KEY 6.3 X 6.3 X 43 1 BEARING, RADIAL BALL 6206 1 HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. PAGE 76 — HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. NO. 1 3 6 7 8 * 11 12 14 * 15 16 PART NO. 12000ZE2834 16541ZE2010 90131896650 90446KE1000 91201890003 9410912000 9425110000 961006202000 90013883000 34150ZH7003 PART NAME QTY. REMARKS CYLINDER ASSY., BALANCER + OIL ALERT ...... 1 .......... INCLUDES ITEMS W/ * SHAFT, GOVERNOR ARM 1 BOLT, DRAIN PLUG 2 WASHER 8.2 X17X0.
HONDA GX240K1QA2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 78 — HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. NO. 1 2 * 3 * 4 * 5 6 7 8 10 11 12 13 14 15 16 17 17 17 17 PART NO. 12200ZH9000 12204ZE2306 12205ZE2305 12216ZE2300 12251ZE2800 12310ZE2020 12391ZE2020 14775ZE2010 90014ZE2000 90042ZE2000 92900080320E 90441ZE2010 9430112200 950051100130M 957011008000 9807955846 9807955855 9807956846 9807956855 PART NAME QTY. REMARKS CYLINDER HEAD COMP. ....................................... 1 ..........
HONDA GX240K1QA2ENGINE — FAN COVER ASSY. FAN COVER ASSY. PAGE 80 — HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2ENGINE — FAN COVER ASSY. FAN COVER ASSY. NO. 1 2 3 4 5 7 9 PART NO. 16731ZE2003 19610ZE2010ZC 19631ZE2D00 32197ZH8003 36100ZH7003 90013883000 90684ZA0601 PART NAME CLIP, TUBE COVER COMP., FAN *NH1* BLACK SHROUD SUB-HARNESS SWITCH ASSY., ENGINE STOP BOLT, FLANGE 6X12, CT200 CLIP, WIRE HARNESS QTY. 1 1 1 1 1 6 1 REMARKS HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. PAGE 82 — HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. NO. 1 2 4 7 8 PART NO. 19511ZE2000 28450ZE2W11 31100ZE2010 90201ZE3V00 90741ZE2000 PART NAME FAN, COOLING PULLEY COMP., STARTER, SCREEN GRID FLYWHEEL COMP. NUT, SPECIAL 16MM KEY, SPECIAL WOODRUFF 25X18 QTY. 1 1 1 1 1 REMARKS HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 84 — HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. NO. 1 2 3 5 6 * 8 11 12 13 14 15 PART NO. 16854ZH8000 16955ZE1000 17510ZE2020ZD 17620ZH7023 17631ZH7003 17672ZE2W01 91353671003 9405008000 950014500360M 9500202080 957010802500 PART NAME QTY. REMARKS RUBBER SUPPORTER 107MM 1 JOINT, FUEL TANK 1 TANK COMP., FUEL *NH1*, BLACK 1 CAP COMP., FUEL FILLER .................................... 1 ..........
HONDA GX240K1QA2 ENGINE — IGNITION COIL ASSY. IGNITION COIL ASSY. PAGE 86 — HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — IGNITION COIL ASSY. IGNITION COIL ASSY. NO. 1 2 6 8 11 PART NO. 30500ZE2023 30700ZE1013 31512ZE2000 36101ZE1010 90015883000 PART NAME COIL ASSY., IGNITION CAP ASSY., NOISE SUPPRESSOR GROMMET, WIRE WIRE, STOP SWITCH 370MM BOLT, FLANGE 6X28 QTY. 1 1 1 1 2 REMARKS HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — MUFFLER ASSY. MUFFLER ASSY. PAGE 88 — HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — MUFFLER ASSY. MUFFLER ASSY. NO. 1 2 3 4 5 6 7 8 10 11 12 13 14 PART NO. 18310ZE2W00 18320ZE2W01 18323ZE2W00 18330ZE2W00 18331ZE2810 18333ZE3800 18355ZE2010 18381ZE2W10 90013883000 90050ZE1000 90055ZE1000 90050ZE1000 9405008000 PART NAME MUFFLER COMP. PROTECTOR COMP., MUFFLER PROTECTOR, EX. PIPE PIPE, EX. CAP, MUFFLER GASKET, EX. PIPE ARRESTER, SPARK GASKET, MUFFLER, ARRESTER BOLT, FLANGE 6X12 CT200 SCREW, TAPPING 5X8 SCREW, TAPPING 4X6 SCREW, TAPPING 5X8 NUT, FLANGE 8MM QTY.
HONDA GX240K1QA2 ENGINE — PISTON ASSY. PISTON ASSY. PAGE 90 — HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — PISTON ASSY. PISTON ASSY. NO. 1 1 1 1 2 2 2 2 3 4 4 5 * 6 PART NO. 13010ZE2013 13011ZE2013 13012ZE2013 13013ZE2013 13101ZE2W00 13102ZE2W00 13103ZE2W00 13104ZE2W00 13111ZE2000 13200ZE2000 13200ZE2305 90001ZE8000 90551ZE1000 PART NAME QTY. REMARKS RING SET, PISTON, STD. 1 RING SET, PISTON, OS 0.25, OPTIONAL 1 RING SET, PISTON, OS 0.50, OPTIONAL 1 RING SET, PISTON, 0.75, OPTIONAL 1 PISTON, STANDARD 1 PISTON, OS 0.25, OPTIONAL 1 PISTON, OS 0.50, OPTIONAL 1 PISTON, 0.
HONDA GX240K1QA2 ENGINE — RECOIL STARTER ASSY. RECOIL STARTER ASSY. PAGE 92 — HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — RECOIL STARTER ASSY. RECOIL STARTER ASSY. NO. 1 2 * 3 * 4 * 5 * 6 * 7 * 8 * 10 * 11 * 13 * 14 PART NO. 28400ZE2W01ZB 28410ZE2W01ZB 28421ZE2W01 28422ZE2W01 28441ZE2W01 28442ZE2W01 28443ZE2W01 28444ZE2W01 28461ZE2W02 28462ZE2W11 90004ZE2W01 90008ZE2003 PART NAME QTY. REMARKS STARTER ASSY., RECOIL *NH1*, BLACK ................... 1 ....... INCLUDES ITEMS W/ * CASE COMP.
HONDA GX240K1QA2 ENGINE — ENGINE LABELS ENGINE LABELS PAGE 94 — HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — ENGINE LABELS ENGINE LABELS NO. 1 3 5 16 PART NO. 87521ZE2W01 87522ZH9000 87528ZE2810 87532ZH8810 PART NAME EMBLEM, INTERNAL LABEL, CAUTION MARK, CHOKE, EXTERNAL MARK, OIL ALERT, E QTY. 1 1 1 1 REMARKS HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV.
TERMS AND CONDITIONS OF SALE — PARTS PAYMENT TERMS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Multiquip reserves the right to quote and sell direct to Government agencies, and to Original Equipment Manufacturer accounts who use our products as integral parts of their own products. a. SPECIAL EXPEDITING SERVICE Terms of payment for parts are net 30 days.
NOTE PAGE HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV.
OPERATION AND PARTS MANUAL HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING UNITED STATES Multiquip Corporate Office 18910 Wilmington Ave. Carson, CA 90746 Contact: mq@multiquip.com MQ Parts Department Tel. (800) 421-1244 Fax (800) 537-3927 Mayco Parts 800-427-1244 310-537-3700 Fax: 800-672-7877 Fax: 310-637-3284 Warranty Department 800-306-2926 310-537-3700 Fax: 800-672-7877 Fax: 310-637-3284 Service Department 800-421-1244, Ext. 279 310-537-3700, Ext.