OPERATION AND PARTS MANUAL MODEL QP-2TZ TRASH PUMP (Diesel Engine) Revision #0 (03/25/05) THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
PAGE 2 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV.
HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING MULTIQUIP CORPORATE OFFICE 18910 Wilmington Ave. Carson, CA 90746 Email: mq@multiquip.com Internet: www.multiquip.com PARTS DEPARTMENT 800-427-1244 310-537-3700 MAYCO PARTS 800-306-2926 310-537-3700 SERVICE DEPARTMENT 800-421-1244 310-537-3700 TECHNICAL ASSISTANCE 800-478-1244 WARRANTY DEPARTMENT 800-421-1244, EXT. 279 310-537-3700, EXT.
QP-2TZ — TABLE OF CONTENTS MQ QP-2TZ Trash Pump Hatz 1B20 Diesel Engine Here’s How To Get Help ............................................ 3 Table of Contents ...................................................... 4 Parts Ordering Procedures ....................................... 5 Safety Message Alert Symbols .............................. 6-7 Rules For Safe Operation ...................................... 8-9 Pump Specifications/Dimensions .............................10 Engine Specifications ........
PARTS ORDERING PROCEDURES When ordering parts, please supply the following information: ❒ ❒ ❒ ❒ ❒ ❒ ❒ Dealer account number Dealer name and address Shipping address (if different than billing address) Return fax number Applicable model number Quantity, part number and description of each part Specify preferred method of shipment: ✓ FedEx or UPS Ground ✓ FedEx or UPS Second Day or Third Day Note: Unless otherwise indicated by customer, all orders are treated as “Standard Orders”, and will ✓ FedEx or UPS Nex
QP-2TZ — SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others. This Owner's Manual has been developed to provide complete instructions for the safe and efficient operation of the Multiquip Model QP-2TZ Trash Pump.
QP-2TZ — SAFETY MESSAGE ALERT SYMBOLS Accidental Starting Respiratory Hazard ALWAYS place the engine ON/OFF switch in the OFF position when the pump is not in use. ALWAYS wear approved respiratory protection. Equipment Damage Messages Sight and Hearing hazard ALWAYS wear approved eye and hearing protection. Other important messages are provided throughout this manual to help prevent damage to your pump, other property, or the surrounding environment.
RULES FOR SAFE OPERATION DANGER Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the trash pump: GENERAL SAFETY ■ DO NOT operate or service this equipment before reading this entire manual. ■ This equipment should not be operated by persons under 18 years of age.
RULES FOR SAFE OPERATION ■ NEVER Run engine without air cleaner. Severe engine damage may occur. ■ ALWAYS read, understand, and follow procedures in Operator’s Manual before attempting to operate equipment. ■ ALWAYS be sure the operator is familiar with proper safety precautions and operation techniques before using pump. ■ ALWAYS store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children.
QP-2TZ — SPECIFICATIONS/DIMENSIONS (PUMP) Table 1. Specifications (Pump) Pump Dimension (L x W x H) Dry Net Weight Model QP-2TZ Type Trash Pump Suction & Discharge Size 2.00 in. (50 mm.) Maximum Pumping Capacity 198 gallons/minute (750 liters/minute) Max. Solids Diameter 1.50 in. (25.4 mm.) Max. Lift 25 ft. (7.62 meters) Max. Head 95 ft. (29.0 meters) 26.5 x 18.3 X 23.2 in. (67.5 X 46.5 X 59.0 cm.) 131 lbs. (59.5 Kg.) 18.3 IN. (46.5 CM.) 23.2 IN. (59 CM.) 26.5 IN. (67.5 CM.) Figure 1.
QP-2TZ — SPECIFICATIONS (ENGINE) Table 2. Engine Specifications (HATZ 1B20) HATZ Diesel Model 1B20 Air-Cooled No. Cylinders Displacement 1 14.5 in3 (.232 liters) Idle Speed Lube Oil Capacity Type Air Cleaner Starting Method Weight 800 RPM 0.95 qts. (0.9 liters) Dry Element Recoil Star t 72 lbs. (33 kg.) Engine Oil Type CCMC - D4 - D5 - PD@ or API - CDCE - CF -CG or SHPD Type Fuel EN 590 - DIN 51601 BS 2869 A1/A2ASTM D 975-1D/2D TOTAL HEAD FT. 110 100 90 80 70 60 50 40 30 20 10 0 1.6 FT.
QP-2TZ — GENERAL INFORMATION APPLICATION The QP-2TZ Trash Pump is designed to be used for dewatering applications. Both the suction and discharge ports on the QP-2TZ trash pump use a 2-inch diameter opening, which allows the pump to pump at a rate of approximately 211 gallons/ minute (gpm) or 800 liters/minute (lpm). Trash or self-priming pumps are designed to purge air from the suction line and create a partial vacuum in the pump body.
QP-2TZ — PUMP COMPONENTS Figure 2 shows a typical application using the QP-2TZ Trash pump. Please note that this pump is intended for the removal of clean water and water containing some debris and solids. Maximum size of solids should not exceed 1.0 inch (25 mm) in diameter. DO NOT set strainer on bottom of water bed. Placing the strainer above the water bed will prevent the pump from drawing in excessive amounts of sand and foreign debris. Figure 2. QP-2TZ Pump Application 1.
QP-2TZ — REFUELING DANGER Adding fuel to the tank should be done only when the engine is stopped and has had an opportunity to cool down. In the event of a fuel spill, DO NOT attempt to start the engine until the fuel residue has been completely wiped up, and the area surrounding the engine is dry. If pump is placed in a truck bed with a plastic liner, REMOVE pump from truck bed and place on ground (Figure 3) to refuel. The possibility of fire or explosion exists, due to static electricity.
QP-2TZ — BASIC ENGINE Figure 4. Engine Controls and Components INITIAL SERVICING The engine (Figure 4) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturer’s Engine manual for instructions & details of operation and servicing. 1. Fuel Filler Cap/Fuel Tank – Pull this latch to add diesel fuel to the tank. After refueling, always make sure the fuel cap is latched properly. DO NOT over fill. For additional information refer to engine owner's manual. 6.
QP-2TZ — PRE-INSPECTION (ENGINE) CAUTION NEVER operate the pump in a confined area or enclosed area structure that does not provide ample free flow of air. 3. Insert and remove the dipstick without screwing it into the filler neck. Check the oil level shown on the dipstick. 4. If the oil level is low (Figure 6), fill to the edge of the oil filler hole with the recommended oil type (Table 5). Maximum oil capacity is 1.16 quarts (1.
QP-2TZ — PRE-SETUP (PUMP) Before Starting 1. Read safety instructions at the beginning of manual. NOTE 2. Place pump as near to water as possible, on a firm flat, level surface. 3. To prime pump, remove fill cap (Figure 2) and fill pump casing with water. If the pump casing is not filled with water before starting, it will not begin pumping. CAUTION Pump casing must be filled with water before using pump. Otherwise pump will not be able to begin pumping.
QP-2TZ — INITIAL START-UP (ENGINE) CAUTION CAUTION DO NOT attempt to operate the pump until the Safety, General Information and Inspection sections of this manual have been read and thoroughly understood. This section is intended to assist the operator with the initial start-up of the trash pump. It is extremely important that this section be read carefully before attempting to use the pump in the field. Starting the Engine (HATZ engine) 3. Move the engine speed lever to the START position (Figure 8).
QP-2TZ — MAINTENANCE (PUMP) Pump Vacuum Test CAUTI CAUTION DO NOT attempt to start the engine unless the pump has previously been primed with water. Severe pump damage will occur if pump has not been primed. To perform the pump vacuum test do the following: 1. Remove the pump fill cap (Figure 2), and fill the pump with water. 2. Start the engine as outlined in the initial start-up section, and wait for the pump to begin pumping. 3.
QP-2TZ — MAINTENANCE (PUMP) NOTE Pressure reading may vary depending on altitude. See Tables 3 and 4 on page 12. Figure 13. Pump Vacuum Tester PAGE 20 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV.
QP-2TZ — MAINTENANCE (ENGINE) Engine Maintenance Perform engine maintenance procedures as referenced by Table 6 below: Table 6. Engine Maintenance Schedule DESCRIPTION (3) OPERATION BEFORE CHECK X FIRST EVERY MONTH 3 MONTHS OR OR 10 HRS. 25 HRS. EVERY 6 MONTHS OR 50 HRS. EVERY YEAR OR 100 HRS. EVERY 2 YEARS OR 200 HRS.
QP-2TZ — MAINTENANCE (ENGINE) Maintenance Perform the engine maintenance procedures as indicated below: DAILY ■ Thoroughly remove dirt and oil from the engine and control area. Clean or replace the air cleaner elements as necessary. Check and retighten all fasteners as necessary. Check the spring box and bellows for oil leaks. Repair or replace as needed. WEEKLY ■ Remove the fuel filter cap and clean the inside of the fuel tank. ■ Remove or clean the filter at the bottom of the tank. ENGINE OIL 1.
QP-2TZ — PREPARATION FOR LONG -TERM STORAGE Pump Storage For storage of the pump for over 30 days, the following is required: z Drain the fuel tank completely. z Run the engine for about 3 minutes and then stop. z Stop the engine. Drain the engine crankcase oil while the engine is still warm. Fill engine crankcase with fresh oil. z Pull the recoil starter grip (Figure 17) 2 or 3 times. DO NOT start the engine. z Pull the recoil starter grip slowly. STOP when it feels tight.
QP-2TZ — TROUBLESHOOTING (ENGINE) TABLE 7. ENGINE TROUBLESHOOTING SYMPTOM POSSIBLE PROBLEM SOLUTION Speed control lever is in "STOP" position? Set speed control lever to "START" position. No fuel reaching injection pump? Add fuel. Check entire fuel system. Defective fuel pump? Replace fuel pump. Fuel filter clogged? Replace fuel filter and clean tank. Faulty fuel supply line? Replace or repair fuel line. Compression too low? Check piston, cylinder and valves.
QP-2TZ — TROUBLESHOOTING (PUMP) TABLE 8. PUMP TROUBLESHOOTING SYMPTOM Pump does not take on water. POSSIBLE PROBLEM Not enough priming water in the housing? Add water. Engine speed too low? Increase throttle. Strainer plugged? Clean strainer. Suction hose damaged? Replace or repair hose, and clamps Air leak at suction por t? Check that fittings are tight and properly sealed. Pump is located too high above water line? Move pump closer to water.
QP-2TZ — EXPLANATION OF CODE IN REMARKS COLUMN How to read the marks and remarks used in this parts book. Items Found In the “Remarks” Column Serial Numbers-Where indicated, this indicates a serial number range (inclusive) where a particular part is used. NOTE The contents of this catalog are subject to change without notice. Model Number-Where indicated, this shows that the corresponding part is utilized only with this specific model number or model number variant.
QP-2TZ — SUGGESTED SPARE PARTS QP-2TZ TRASH PUMP 1 TO 3 UNITS W/ HATZ IB20 Qty. P/N Description 2 ............ KIT2T .................... KIT, MECHANICAL SEAL, O-RINGS 1 ............ 2257040030 .......... IMPELLER 2 ............ 0631211159 .......... FLOODING CAP 3 ............ 50426000 .............. AIR FILTER ELEMENT 1 ........... 01548800 ............ ROPE RECOIL STARTER 1 ............ 01535302 .............. CAP, FUEL TANK 1 ............ 01635200 ..............
QP-2TZ — PUMP ASSY. PUMP ASSY. PAGE 28 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV.
QP-2TZ — PUMP ASSY. PUMP ASSY. NO. PART NO.
QP-2TZ — PUMP ASSY. PUMP ASSY. PAGE 30 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV.
QP-2TZ — PUMP ASSY. PUMP ASSY. NO. PART NO. 38 0151191250 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 0520030413 43592012400011 0204490060 0205490080 0205490100 0205490100 0451290100 0401650080 0457290080 0451290080 0451290100 0451290080 0451290080 0451290080 0458220080 0742214050 1889068050 0741310700 1B20 KIT2T PART NAME QTY. REMARKS STUD BOLT (DRAIN COVER HANDLE), 4 M12 X 50 X15 X 20 KEY, 4.7 X 16 1 IMPELLER WASHER, 35 X 9 T4.
HATZ 1B20 — SPARE PARTS KIT ASSY. SPARE PARTS KITS ASSY. PAGE 32 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV.
HATZ 1B20 — SPARE PARTS KIT ASSY. SPARE PARTS KITS ASSY. NO. 1 2 3 4 PART NO. 01554100 01554200 01554300 01554400 PART NAME GASKET SET CYL. HEAD GASKET SET CRANKCASE MAINTENANCE KIT- 1000 HRS EMERGENCY KIT QTY. 1 1 1 1 REMARKS QP-2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV.
HATZ 1B20 — ACCESSORIES ASSY. ACCESSORIES ASSY. PAGE 34 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV.
HATZ 1B20 — ACCESSORIES ASSY. ACCESSORIES ASSY. NO. 1 2 3 4 PART NO. 01331001 05110401 05130000 05130100 PART NAME TOOL KIT DECAL MAINTENANCE DECAL START DECAL QTY. 1 1 1 1 REMARKS QP-2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV.
HATZ 1B20 — CRANKCASE AND ENGINE MOUNT ASSY. CRANKCASE AND ENGINE MOUNT ASSY. NOTE: Refer to Table 9 at the end of the manual for letter ( A to L) call-outs. PAGE 36 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV.
HATZ 1B20 — CRANKCASE AND ENGINE MOUNT ASSY. CRANKCASE AND ENGINE MOUNT ASSY. NO. 1 2 * 3 * 5 * 6 * 7 * 8 * 9 * 10 * 11 * 12 * 13 14 15 16 17% 18% 19 20 21 22 23 24 25 PART NO.
HATZ 1B20 — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PAGE 38 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV.
HATZ 1B20 — CRANKSHAFT ASSY. CRANKSHAFT ASSY. NO. 1 2 * 3 * 9 10 11 12 13 15 16 PART NO. 01552700 04125300 05100000 40032500 50120600 04114201 50443600 05107301 50463400 PART NAME QTY. REMARKS CRANKSHAFT NO. X W/ PLUG .......................... 1 ................. INCLUDES ITEMS W/ * CRANKSHAFT .................................................... 1 ................. NOT SOLD SEPARATELY CLOSING PLUG 12 MM 1 STUB SHAFT 20 DIA. 1 SUPPORTING DISK 40X50X2.5 1 CIRCLIP A40X1.75 1 DISK 18.5X37X5 1 HEX.
HATZ 1B20 — CAMSHAFT ASSY. CAMSHAFT ASSY. PAGE 40 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV.
HATZ 1B20 — CAMSHAFT ASSY. CAMSHAFT ASSY. NO. 1 3 * 4 * 5 * 6 * 7 * 8 * 9 10 11 12 13 14 PART NO. 01503520 01326400 50123200 01326600 50255300 01326500 04121700 04112100 04112200 04112300 04125100 04125200 PART NAME QTY. REMARKS CAMSHAFT ASSY. ..................................... 1 .............. INCLUDES ITEMS W/ * CAMLEVER 1 SHIM 5X10X0.5 DIN988 2 FLYWEIGHT 1 LOCK WASHER 2 FLYWEIGHT 1 CAMSHAFT................................................. 1 .............. NOT SOLD SEPARATELY WASHER 0.9MM 23X38X0.
HATZ 1B20 — PISTON ASSY. PISTON ASSY. PAGE 42 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV.
HATZ 1B20 — PISTON ASSY. PISTON ASSY. NO. 1 2 % * 3 % * 4 % * 5 % * 6% 7 8 9$ 10$ 11 12 PART NO. 01317100 50425500 50425400 01317200 01554500 01500100 05046900 01575700 01581900 PART NAME QTY. REMARKS PISTON 69MM ASSY. ................................. 1 .............. INCLUDES ITEMS W/ * PISTON 69MM ............................................ 1 .............. NOT SOLD SEPARATELY CIRCLIP 2 PISTON PIN 1 PISTON RING SET 69MM 1 CYLINDER .................................................. 1 ..............
HATZ 1B20 — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 44 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV.
HATZ 1B20 — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. NO. 1 2 * 3 * 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 PART NO. 01500221 24 25 05047310 01509600 26+ 27+ 28 29 30 32 33 34 35 36 37 38 39 40 50425900 05119400 05062500 05054000 04107500 05053200 05053300 50425800 04093700 04093600 04093800 50425700 50445100 05091101 50358000 05054700 05050900 05061201 50364300 05055700 50081200 50374900 04117600 50129500 05059400 05059500 05059600 05059700 05059800 05059900 05060000 05060100 PART NAME QTY.
HATZ 1B20 — OIL PUMP/GOVERNOR ASSY. OIL PUMP/GOVERNOR NOTE: Refer to Table 9 at the end of the manual for letter ( A to L) call-outs. PAGE 46 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV.
HATZ 1B20 — OIL PUMP/GOVERNOR ASSY. OIL PUMP/GOVERNOR NO. 1 2 * 3 * 4 * 5 * 6 * 7 8 9 10 11 12 13 14 15 16 17 18 18 19 20 21 22 23 25 26 27 28 29 30 31 32 34 35 36 37 38 39 PART NO. 01530210 50434901 05097100 50447900 50429400 05097300 04102900 50447400 50447500 05078600 50434800 05079400 01530402 50422400 50125800 50435000 05079800 05131600 05078900 05148600 50144400 50144500 04095600 03927300 05079301 50092700 50347100 01333000 50114300 50144500 50144400 50423900 04122900 01316402 PART NAME QTY.
HATZ 1B20 — OIL PUMP/GOVERNOR ASSY. (CONT.) OIL PUMP/GOVERNOR NOTE: Refer to Table 9 at the end of the manual for letter ( A to L) call-outs. PAGE 48 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV.
HATZ 1B20 — OIL PUMP/GOVERNOR ASSY. (CONT.) OIL PUMP/GOVERNOR NO. 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 PART NO. 40022401 50138100 50004200 05079601 05078501 50475300 05151300 50475400 50328300 04122800 04000200 05130900 05130800 50465300 05146900 05147001 05151700 50475800 50475700 PART NAME O- RING 8X2 THREADED PIN M6X35 THREADED PIN M6X18 CENTRIFUGAL WEIGHT GOVERNOR SLEEVE FILL. HEAD SCREW 5X25 SUPPORT PIN 5X8 HEX. NUT M6 PLATE SPRING TENSION SPRING GOVERNOR SPRING STOP PLATE CYL.
HATZ 1B20 — TIMING COVER ASSY. TIMING COVER ASSY. NOTE: Refer to Table 9 at the end of the manual for letter ( A to L) call-outs. PAGE 50 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV.
HATZ 1B20 — TIMING COVER ASSY. TIMING COVER ASSY. NO. 1 2 * 3 * 4 * 5 * 5 6 * 7 * 8 9 10 11 12$ 13$ 14$ 15$ 16$ 17$ 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 * 39 40 41 42 43 44 45 46 PART NO.
HATZ 1B20 — FLYWHEEL ASSY. FLYWHEEL ASSY. PAGE 52 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV.
HATZ 1B20 — FLYWHEEL ASSY. FLYWHEEL ASSY. NO. 1 2 * 3 * 4 * 5 * PART NO. 01579710 01321310 50327300 50003400 04117300 PART NAME QTY. REMARKS FLYWHEEL W/ BLOWER ................................ 1 ............... INCLUDES ITEMS W/ * BLOWER RING 1 ALL. SCREW M4X20 6 SPRING WASHER A4 6 STICKER “TDC” 1 QP-2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV.
HATZ 1B20 — FUEL INJECTION ASSY. FUEL INJECTION ASSY. PAGE 54 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV.
HATZ 1B20 — FUEL INJECTION ASSY. FUEL INJECTION ASSY. NO. 1 2$ 3#$ 4#$ 4 5#$ 6#$ 8$ 9$ 10$ 11$ 12$ 13$ 14$ 15$ 16$ 17$ 18$ 19$ 20$ 21$ 22$ 23$ 24$ 25$ 26$ 27$ 28+$ 29+$ 30+$ 31+$ 32+ 33 PART NO. 01621600 01577110 05096101 05070601 05081500 50436400 50436500 50436600 50436700 50436800 50436900 50437000 50437100 50437200 50437300 50437400 50437500 50437600 50437700 50437800 50437900 50438000 50438100 50438200 50438300 50442200 05070500 PART NAME QTY. REMARKS INJECTOR ASSY. .................................
HATZ 1B20 — FUEL INJECTION ASSY. (CONT.) FUEL INJECTION ASSY. PAGE 56 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV.
HATZ 1B20 — FUEL INJECTION ASSY. (CONT.) FUEL INJECTION ASSY. NO. 34 35 * 36 37* 38* 39* 40* * 41 42* 43* 44* 45* 46* * 47 48* * 49 50 51 52 53 54 55 56$ 57$ 58$ 59$ 60 PART NO. 01322200 01330800 04096300 04096400 04096500 04096600 04096700 50471600 50476900 50476500 50445900 50476000 50433900 04097700 50323900 05089300 05056700 01326100 50464500 50110800 05129000 05130200 05084201 PART NAME QTY. REMARKS INJECTION PUMP ............................... 1 .............
HATZ 1B20 — RECOIL STARTER ASSY. RECOIL STARTER ASSY. NOTE: Refer to Table 9 at the end of the manual for letter ( A to L) call-outs. PAGE 58 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV.
HATZ 1B20 — RECOIL STARTER ASSY. RECOIL STARTER ASSY. NO. 1 2 * 3 # * 4 # * 5 * 6 * 7 * 8 * 9 * 10 * 11 * 12 * 13 * 14 * 15 * 16 * 17 18 19 20 PART NO. 01515002 01497800 03665200 05045201 01569300 50081200 50062700 05088901 01548800 05044901 05045001 50146300 50165600 05044800 05061300 50062700 50170900 50445800 05109100 PART NAME QTY. REMARKS RECOIL STARTER ASSY. ............................... 1 ............... INCLUDES ITEMS W/ * HANDLE ASSY. ............................................... 1 ..........
HATZ 1B20 — AIR DUCT ASSY. AIR DUCT ASSY. NOTE: Refer to Table 9 at the end of the manual for letter ( A to L) call-outs. PAGE 60 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV.
HATZ 1B20 — AIR DUCT ASSY. AIR DUCT ASSY. NO. 1 2 3 4 5 6 7 8 * 9 * 10 * 11 12 13 14 15 17 18 19 20 21 22 23 24# 25# 26 27 PART NO. 01533504 01316800 50170900 50146300 50461700 50144400 01316600 04097600 50334800 50163801 50441600 50445400 50335600 50170700 50392610 50392800 01607000 04099500 04139000 01607100 01316500 04097600 04124500 04124600 PART NAME QTY. REMARKS HOOD 1 BLOWER DUCTING 1 SPRING WASHER 6 7 HEX SCREW M6X18 1 RUBBER SLEEVE 2 HEX NUT M6 6 COOLING AIR DUCTING ..............................
HATZ 1B20 — AIR DUCT ASSY. (CONT.) AIR DUCT ASSY. NOTE: Refer to Table 9 at the end of the manual for letter ( A to L) call-outs. PAGE 62 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV.
HATZ 1B20 — AIR DUCT ASSY. (CONT.) AIR DUCT ASSY. NO. 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 PART NO. 50170800 03575500 00921400 04124400 50453300 01599500 04123200 50328000 50095100 50344700 50144500 50170900 50144400 04119100 50458100 05007300 04042000 04124300 04113800 01579300 50334800 05144100 PART NAME ALLEN SCREW M6X25 SEALING RING SPACER BUSHING SPACER 57MM RUBBER SLEEVE SUPPORT THREAD, BUSH M6 CTR. SUNK SCREW AM6X16 SPRING WASHER A8 HEX.
HATZ 1B20 — CRANKCASE BREATHER ASSY. CRANKCASE BREATHER ASSY. PAGE 64 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV.
HATZ 1B20 — CRANKCASE BREATHER ASSY. CRANKCASE BREATHER ASSY. NO. 1 2 * 3 * 4 * 5 PART NO. 01556400 05102900 01583700 01551600 PART NAME QTY. REMARKS OIL SEPARATOR ASSY. ................................. 1 ............... INCLUDES ITEMS W/ * OIL SEPARATOR ............................................. 1 ............... NOT SOLD SEPARATELY FILTER BREATHER SYSTEM 1 BREATHER TUBE ........................................... 1 ...............
HATZ 1B20 — FUEL TANK ASSY. FUEL TANK ASSY. NOTE: Refer to Table 9 at the end of the manual for letter ( A to L) call-outs. PAGE 66 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV.
HATZ 1B20 — FUEL TANK ASSY. FUEL TANK ASSY. NO. 1 2 3* * 4 5* 6* * 7 8* 9* * 11 12* 13* 14 15 16 17 18 19* 20* 21* 22 23 24 25 26 27* * 28 # * 29 30* 31* 32 34 35 36 37 38 39 40 41 42 43 44 49 50 51 52 53 54 55 * PART NO.
HATZ 1B20 — AIR FILTER ASSY. AIR FILTER ASSY. NOTE: Refer to Table 9 at the end of the manual for letter ( A to L) call-outs. PAGE 68 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV.
HATZ 1B20 — AIR FILTER ASSY. AIR FILTER ASSY. NO. 1 $ * 2 3 4 5 6 7 8 9 10 11 12 $ * 13 14 $ * 15 16 17 $ * 18$ 19$ 20$ 21$ 22 PART NO. $05082900 05056400 50171500 50426000 50454300 05054900 50435800 01515100 50452200 04104200 04103000 05056100 50095100 05056300 05088300 05098100 05147100 05147200 03599000 05043810 01603600 PART NAME QTY. REMARKS SEALING STRIP 1 WASHER 1 ALL. SCREW M8X25 3 AIR FILTER ELEMENT ................................... 1 ...............
HATZ 1B20 — MUFFLER ASSY. MUFFLER ASSY. PAGE 70 — QP- 2TZ TRASH PUMP — OPERATION & PARTS MANUAL — REV.
HATZ 1B20 — MUFFLER ASSY. MUFFLER ASSY. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 25 26 27 PART NO. 40028300 50144500 01531311 05081101 05081410 50422500 01531201 05081611 50128100 05080100 50144500 40028300 50039500 50028800 50450500 01587800 05081002 05077810 05127000 50445000 40028400 50148100 50123000 01532300 05100300 05135000 PART NAME QTY. REMARKS HEX. NUT M6 1 FLAT WASHER 6,4 1 EXHAUST END PIPE 1 THREADED BOLT M6 1 EXHAUST TUBE 1 CTR.
HATZ 1B20 — SEALING AND BONDING ADHESIVES TABLE 9. SEALING AND BONDING ADHESIVES Item Part Number Description Amount A 50223001 Loctite Activator 500 ml B 50223100 Loctitie 573 50 ml C 50223200 Loctite 601 50 ml D 50223300 Loctitie 221 50 ml E 50223400 Loctite 648 10 ml F 50223800 + 50223900 Technicoll 8058 Technicoll 8367 0.75 kg 0.
Effective: October 1, 2002 PAYMENT TERMS TERMS AND CONDITIONS OF SALE — PARTS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Terms of payment for parts are net 10 days. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments are F.O.B. point of origin.
OPERATION AND PARTS MANUAL HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING MULTIQUIP CORPORATE OFFICE 18910 Wilmington Ave. Carson, CA 90746 Email: mq@multiquip.com Internet: www.multiquip.com PARTS DEPARTMENT 800-427-1244 310-537-3700 MAYCO PARTS 800-306-2926 310-537-3700 SERVICE DEPARTMENT 800-421-1244 310-537-3700 TECHNICAL ASSISTANCE 800-478-1244 WARRANTY DEPARTMENT 800-421-1244, EXT. 279 310-537-3700, EXT.
