OPERATION AND PARTS MANUAL BA-SERIES WALK-BEHIND TROWEL © COPYRIGHT 2004, MULTIQUIP INC. EXPORT VERSION ORIGINAL INSTRUCTIONS MODEL # SERIAL # Revision #2 (03/19/04) MULTIQUIP (UK) HANOVER MILL Atlanta • Boise • Newark • Montreal, Canada • Manchester, UK Rio De Janiero, BR • Puebla, MX FITZROY STREET ASHTON-UNDER-LYNE LANCASHIRE, OL7 OTL UNITED KINGDOM PH. 0161-339-2223 FAX. 0161-339-3226 E-MAIL: mq@multiquip.com www.multiquip.
HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING UNITED STATES MULTIQUIP CORPORATE OFFICE 18910 Wilmington Ave. Tel. (800)-421-1244 Carson, CA 90746 Fax (310)-537-3927 Contact: mq@multiquip.com MEXICO MQ CIPSA Carr. Fed. Mexico-Puebla KM 126.5 Tel. (52) 222-225-9900 Momoxpan, Cholula, Puebla 72760 Mexico Fax (52) 222-285-0420 Contact: pmastretta@cipsa.com.mx UNITED KINGDOM MULTIQUIP (UK) LIMITED HEAD OFFICE Hanover Mill, Fitzroy Street, Tel.
BA-SERIES TROWEL— TABLE OF CONTENTS Here's How To Get Help ............................................ 3 Table Of Contents ..................................................... 4 Dimensions ............................................................... 6 Specifications (Engines)............................................ 7 Specifications (Trowel Weights) ................................ 7 Training Checklist ...................................................... 8 Daily Pre-Operation Checklist ...........
NOTE PAGE BA-SERIES WALK-BEHIND TROWEL — OPERATION & PARTS MANUAL — REV.
BA-SERIES TROWEL— DIMENSIONS Side View Figure 1. BA-Series Trowel Dimensions Table 1. BA-Series Trowel Specifications A– Height (Lifting Hook) 87.62 cm (34.5 in.) B– Height Engagement Lever) 104.4 cm (41.1 in.) 116.84 cm (46.0 in.) C–Width 191.0 cm (75.2 in.) D–Length Weight – Operating See Table 3 Sound Pressure 97 db Vibration (6.3 m/s2) Ring Diameter 117 cm (46 in.) Number of Blades 3 or 4 Blade Tip Speed – FPM (m/s) 1,478 fpm (7.5 m/s) Rotor – RPM (Gasoline) 60 to 125 Path Width – cm (in.
BA-SERIES TROWEL— SPECIFICATIONS (ENGINES) Table 2. Specifications (Engines) Engine Model HONDA GX240K1 ROBIN EH-25-2 Type Air-cooled 4 stroke, Single Cylinder, OHV, Horizontal Shaft Gasoline Engine Air-cooled 4 stroke, Single Cylinder, OHV, Horizontal Shaft Gasoline Engine Bore X Stroke 73 mm x 58 mm (2.90 in. X 2.30 in.) 75 mm x 57 mm (2.95 in. x 2.24 in.) Displacement 14.81 cc 15.31 cc 5.97kW (8.0 H.P.)/3600 R.P.M. 6.34kW (8.5 H.P.)/4000 R.P.M. Approx. 6 Liters (1.59 U.S.
BA-SERIES TROWEL— TRAINING CHECKLIST TRAINING CHECKLIST This checklist will lists some of the minimum requirements for machine maintenance and operation. Please feel free to detach it and make copies. Use this checklist whenever a new operator is to be trained or it can be used as a review for more experienced operator’s. TRAINING CHECKLIST NO. DESCRIPTION 1 Read Operator’s Manual completely. 2 Machine layout, location of components, checking of engine and gearbox fluid level.
BA-SERIES TROWEL— DAILY PRE-OPERATION CHECKLIST DAILY PRE-OPERATION CHECKLIST DAILY PRE-OPERATION CHECKLIST 1 Engine Oil Level. 2 Gearbox Fluid Level. 3 Condition of Blades. 4 Blade Pitch Operation. 5 Clutch Operation. 6 Engine Shutdown Safety Switch Operation COMMENTS: BA-SERIES WALK-BEHIND TROWEL — OPERATION & PARTS MANUAL — REV.
BA-SERIES TROWEL — SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! Safety precautions should be followed at all times when operating this equipment. Failure to read and understand and comply with the Safety Messages and Operating Instructions could result in injury to yourself and others. NOTE This Owner's Manual has been developed to provide complete instructions for the safe and efficient operation of the MQ Whiteman BA SERIES TROWEL.
BA-SERIES TROWEL — SAFETY MESSAGE ALERT SYMBOLS Accidental Starting Respiratory Hazard ALWAYS place the engine ON/OFF switch in the OFF position, when the trowel is not in use. Over Speed Conditions ALWAYS wear approved respiratory protection. Sight and Hearing hazard NEVER tamper with the factory settings of the engine governor or settings. Personal injury and damage to the engine or equipment can result if operating in speed ranges above maximum allowable.
BA-SERIES TROWEL — RULES FOR SAFE OPERATION RULES FOR SAFE OPERATION WARNING Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the BA Series. ■ NEVER operate this equipment when not feeling well due to fatigue, illness or taking medicine.
BA-SERIES TROWEL — RULES FOR SAFE OPERATION ■ NEVER Run engine without air filter. Severe engine damage may occur. Service air filter frequently to prevent carburetor malfunction. ■ NEVER place your feet or hands inside the guard rings while starting or operating this equipment. ■ AVOID wearing jewelry or loose fitting clothing that may snag on the controls or moving parts as this can cause a serious injury. ■ ALWAYS keep clear of rotating or moving parts while operating the trowel.
BA-SERIES TROWEL— OPERATION AND SAFETY DECALS OPERATION AND SAFETY DECALS The BA-Series walk-behind trowel is equipped with a number of operation,safety, and maintenance decals. Should any of these decals become unreadable, replacements can be obtained from your dealer. P/N 11092 P/N 20936 P/N 2942 WHITE TEXT 13” QU ICK ICK QU PITCH™ HAN DLE TE FL OO R CRE ON C FINISHER TCH BOISE, IDAHO USA PO P/N 12405 P/N: 13118 W U. S.
BA-SERIES TROWEL— GENERAL INFORMATION Intended Use Spider Operate the BA Series Trowel, tools and components in accordance with the manufacturer's instructions. Use of any other tools for stated operation is considered contrary to designated use. The risk of such use lies entirely with the user. The manufacturer cannot be held liable for damages as a result of misuse. The vertical output shaft of the gearbox connects to a cast hub called the spider.
BA-SERIES TROWEL— CONTROLS AND COMPONENTS 4 5 3 6 2 1 QUICK PITCH ™ HANDLE 7 8 O R MB O CO T A IC D B IN H IS IM IN R F T O D MB A CO O L E R J 13 P F H IS IN 4 9 W 5 11 3 6 2 20 12 15 Figure 3. BA-Series Walk-Behind Trowels 7 8 STANDARD HANDLE 13 14 W 18 10 16 17 PAGE 16 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
BA-SERIES TROWEL— CONTROLS AND COMPONENTS Figures 3 shows the location of the basic controls or components, for the BA-Series trowel. Listed below is a brief explanation of each control or component 1. Quick Pitch™ Control Handle – To adjust the pitch of the blades, grasp the handle then squeeze and either move the handle forward or backward to achieve the desired blade pitch. 2.
BA-SERIES TROWEL— BASIC ENGINE Figure 4. Engine Controls and Components INITIAL SERVICING The engine (Figure 4) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers engine manual for instructions & details of operation and servicing. The engine shown above is a HONDA engine, operation for other types of engines may vary somewhat. 1. 5. Fuel Valve Lever – OPEN to let fuel flow, CLOSE to stop the flow of fuel. 6.
BA-SERIES TROWEL — ASSEMBLY AND INSTALLATION Assembly and Installation Before the trowel can be put into operation there are some components that must be installed before the trowel can be used. This section provided general instructions on how to install those components. Instruction sheet P/N 20485 provides further details for the handle assembly. Handle Tube Installation (All Models) 1. Install the handle tube to the gearbox as shown in (Figure 5).
BA-SERIES TROWEL — ASSEMBLY AND INSTALLATION ENGINE-OFF SAFETY SWITCH RED WIRE FROM SWITCH Figure 9. Throttle Cable Connection (ROBIN) 4. Tighten cable clamp screw and swivel stop screw. 5. After the cable has been installed on the engine, adjust and tighten operator position of the handle to lock the throttle cable at the proper length. 6. Adjust cable tension by rotating the barrel adjuster. (Figure 10) RED WIRE FROM ENGINE Figure 11.
BA-SERIES TROWEL — ASSEMBLY AND INSTALLATION Pre-load Adjustment (Quick-Pitch™ Models Only) 2. 3. 4. Lock the spring in the compressed position, by releasing the blade pitch adjustment trigger, (Quick-Pitch™ model). Remove one brass set nut from the blade pitch cable end as shown in (Figure 14). 1. After the Quick-Pitch™ handle has been installed on the trowel, spring pre-load adjustment will be required. 2. Locate the adjustment screw on the underside of the handle tube (Figure 16).
BA-SERIES TROWEL— PRE-INSPECTION DANGER NEVER operate the trowel in a confined area or enclosed area structure that does not provide ample free flow of air. CAUTION ALWAYS wear approved eye and hearing protection before operating the trowel. NEVER place hands or feet inside the guard rings while the engine is running. ALWAYS shut the engine down before performing any kind of maintenance service on the trowel.
BA-SERIES TROWEL— PRE-INSPECTION Blade Check DANGER Check for worn or damaged blades. Check to see if one blade is worn out while the others look new. If this is the case there could be a blade pitch problem. Refer to the maintenance section of this manual for blade pitch adjustment procedure. Replace any worn blades. EXPLOSIVE FUEL! Motor fuels are highly flammable and can be dangerous if mishandled. DO NOT smoke while refueling. DO NOT attempt to refuel the trowel if the engine is hot or running.
BA-SERIES TROWEL — INITIAL START-UP CAUTION The trowel is heavy and awkward to move around. Use proper heavy lifting procedures and DO NOT lift the trowel by the guard rings. Lifting the Trowel Onto a Slab. Auxiliary Lifting Tube Remove the auxiliary lifting tube located on top of the main handle. Insert the tube into the socket located on the opposite side of the gearbox (Figure 21) from the handle. Make sure that the hole in the tube engages with the pin in the socket.
BA-SERIES TROWEL — INITIAL START-UP 3. Place the centrifugal Engine-Off switch (Figure 24) in the "ON" position. For models that use this feature. WARNING NEVER disable or disconnect the centrifugal Engine-Off switch. It is provided for the operators’ safety and injury may result if it is disabled, disconnected or improperly maintained. Figure 26. Starter Grip 6. If the engine has started, slowly return the choke lever (Figure 25) to the CLOSED position.
BA-SERIES TROWEL — OPERATION The following steps are intended as a basic guide to machine operation, and are not to be considered a complete guide to concrete finishing. We suggest that all operators (experienced and novice) read “Slabs on Grade” published by the American Concrete Institute, Detroit, Michigan. Read the “Training” section of this manual for more information. Pitching The Blades Quick Pitch Handle 1.
BA-SERIES TROWEL — OPERATION Figure 32 below illustrates a typical walk-behind trowel application. Practice maneuvering the trowel. The trick is to "let the trowel do the work". Continue to practice maneuvering the trowel. Try to practice as if you were finishing a slab of concrete. Practice edging and covering a large area. Remember a good finishing technique is to work backwards. Be careful when moving backwards so that hazards can be avoided. The best way to get accustomed to the trowel is repeated use.
BA-SERIES TROWEL — OPTIONS Clip-On Float Blades (Optional) Blades Blades should be changed when they fail to finish concrete in a satisfactory manner. NOTE These blades will clip (Figure 34) on to an existing installed blade, allowing your finisher to float on “wet” concrete so that the troweling operation can begin as early as possible.
BA-SERIES TROWEL — OPTIONS Grinding Attachments Trowel Arm Adjustment Tool Available grinding attachments are used for grinding surface imperfections or joints. These attachments allow greater utilization of your trowel. Figure 36 illustrates a typical grinding disk assembly, complete with hub and stone mounting plate. If blades show uneven wear patterns or some tend to wear out faster than others, the trowel arms may need to be adjusted.
BA-SERIES TROWEL — MAINTENANCE NOTE See the engine manual supplied with your machine for appropriate engine maintenance schedule and troubleshooting guide for problems. At the front of the book (Page 7) there is a “Daily Pre-Operation Checklist ”. Make copies of this checklist and use it on a daily basis. WARNING ALWAYS disconnect spark plug and secure away from the engine before performing service or maintenance. CAUTION ALWAYS allow the engine to cool before servicing.
BA-SERIES TROWEL — MAINTENANCE 2. Start engine, and bring trowel blades up to full speed and look for the following conditions: ■ Does the trowel have a perceived rolling or bouncing motion when in use? ■ Look at the trowel while it is running, does the guard ring “rock up and down” relative to the ground? Spider Removal b. Loosen the jam nut and cone point square head set screw, and carefully lift the upper trowel assembly off of the spider assembly.
BA-SERIES TROWEL — MAINTENANCE 3. Should the trowel arm inserts (bronze bushing ) come out with the trowel arm, remove the bushing from the trowel arm and set aside in a safe place. If the bushing is retained inside the spider plate, carefully remove the bushing. 4. Examine the bronze trowel arm bushing insert (Figure 44), clean if necessary. Replace bushing if out of round or worn. Trowel Arm Flatness Test 1. Using a piece of 19 mm (3/4 in.
BA-SERIES TROWEL — MAINTENANCE Trowel Arm Adjustment Shown in Figure 47 is the adjustment fixture with a trowel arm inserted. As each trowel arm is locked into the fixture, the arm bolt is adjusted to where it contacts a stop on the fixture. This will consistently adjust all of the trowel arms, keeping the finisher as flat and evenly pitched as possible. 1. Locate the trowel arm adjustment tool P/N 1817.
BA-SERIES TROWEL — MAINTENANCE 11. Carefully lift the upper trowel assembly, line up the keyway on gear box main shaft and insert into spider assembly. 12. Reinstall square head cone point into spider plate and tighten in place. Tighten jam nut. Use care in making sure point of set screw engages groove in gear box main shaft. 13. Lubricate all grease points (zerk fittings) with premium "Lithum 12" based grease, conforming to NLG1 Grade #2 consistency. Testing 1.
BA-SERIES TROWEL — MAINTENANCE 1. Lower finisher onto pan with blades (item #1) adjacent to ZClips (item #4). Installing Pans Onto Finisher Blades 2. Rotate blades into position under Z-Clips. Ensure that the blades are rotated in the direction of travel when the machine is in operation or use the engine to rotate the blades into position. 3. Attach the blade tie-downs (item #3) to the far side of the ZClip brackets (item #4) with tie-down knobs (item #2) as shown in figure 49.
BA-SERIES TROWEL — TROUBLESHOOTING (TROWEL) TABLE 6. TROUBLESHOOTING SYMPTOM Engine running rough or not at all. Safety Engine-Offl switch not functioning. If trowel “bounces, rolls concrete, or makes uneven swirls in concrete”. Machine has a perceptible rolling motion while running. POSSIBLE PROBLEM SOLUTION Engine-Off switch malfunction? Make sure that the Engine-Off switch is ON or replace switch if necessary. Fuel? Look at the fuel system. Make sure there is fuel being supplied to the engine.
BA-SERIES TROWEL — TROUBLESHOOTING (TROWEL) TABLE 6. TROUBLESHOOTING (CONTINUED) SYMPTOM Clutch slipping or sluggish response to engine speed change. POSSIBLE PROBLEM SOLUTION Worn V-belts? Replace V-belt. Dir ty centrifugal clutch? Disassemble and clean clutch. Defective or worn out centrifugal clutch? Replace entire clutch. Hand clutch out of adjustment? Adjust per instructions in maintenance section of this manual. Worn or defective hand clutch par ts? Replace par ts as necessary.
BA-SERIES TROWEL — TROUBLESHOOTING (ENGINE) TABLE 7. TROUBLESHOOTING (ENGINE) SYMPTOM Difficult to star t, "fuel is available, but no SPARK at spark plug". Difficult to star t, "fuel is available, and SPARK is present at the spark plug". Difficult to star t, "fuel is available, spark is present and compression is normal". Difficult to star t, "fuel is available, spark is present and compression is low". POSSIBLE CAUSE SOLUTION Spark plug bridging? Check gap, insulation or replace spark plug.
NOTE PAGE BA-SERIES WALK-BEHIND TROWEL — OPERATION & PARTS MANUAL — REV.
BA-SERIES TROWEL — EXPLANATION OF CODES IN REMARKS COLUMN How to read the marks and remarks used in this parts book. Items Found In the “Remarks” Column Serial Numbers-Where indicated, this indicates a serial number range (inclusive) where a particular part is used. Model Number-Where indicated, this shows that the corresponding part is utilized only with this specific model number or model number variant. All parts with same symbol in the number column, , #, +, %, or ■, belong to the same assembly or kit.
BA-SERIES TROWEL — SUGGESTED SPARE PARTS BA-SERIES TROWEL 1 TO 3 UNITS WITH HONDA GX-240K1 ENGINE. 1 to 3 Units Qty. ........ P/N .............................. Description 3 ............ 20478 .................... GRIP 2 ............ 20856 .................... SAFETY SWITCH 1 ............ 20285 .................... CABLE STANDARD HANDLE 1 ............ 20297 .................... CABLE QUICK-PITCH™ 1 ............ 20435 .................... THROTTLE CABLE 4 ............ 1157 A .................. BUSHING 1 ..
BA-SERIES TROWEL — NAMEPLATE AND DECALS NAMEPLATES AND DECALS 3 2 4 1 QUICK PITCH ™ HANDLE 5 O 9 R MB O CO T A IC D B IN H 8 IS IM IN R F T O D MB A CO O L E R J P F 6 H IS IN 7 W 12 10 STANDARD HANDLE 11 13 14 15 16 W 19 17 18 PAGE 42 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
BA-SERIES TROWEL — NAMEPLATE AND DECALS NAMEPLATE AND DECALS NO. 1 2 3 4 5 6 7 8 9 PART NO. 1758 12405 20527 20526 2942 1736 1735 11246 10 11 12 1940 11092 11246 13 14 1492 1147 15 11246 16 17 18 19 1261 1848 2938 11246 20 21 22 35137 35168 21455 PART NAME QTY. REMARKS DECAL: QUICK-PITCH™ HANDLE 1 DECAL: QUICK-PITCH™ HANDLE INSERT 2 DECAL: QUICK-PITCH™ WARNING ................. 1 ....... SAFETY ITEM DECAL: QUICK-PITCH™ LATCH WARNING ....... 1 .......
BA-SERIES TROWEL — STANDARD HANDLE STANDARD HANDLE 40 3 21 5 7 4 8 6 9 10 22 18 DETAIL “A” 17 43 16 11 14 42 15 19 2 20 44 SEE DETAIL “B” 21 22 SEE DETAIL “A” 1 12 3 13 24 23 39 27 30 31 25 26 41 ASM 32 38 12 3 37 33 2 36 28 1 35 29 DETAIL “B” 34 1 APPLY THREAD LOCK (LOCTITE 242 BLUE OR EQUIVALENT). 2 PART OF ENGINE ASSEMBLY. 3 CABLE IS ATTACHED TO THROTTLE AND SEALED AT THE FACTORY. ORDERABLE AS A UNIT ONLY.
BA-SERIES TROWEL — STANDARD HANDLE STANDARD HANDLE NO. 1 2 3 4* 5* 6* 7* 8* 9* 10 11 12 13 14 15 16 17 18 19 20 21 PART NO. 20463 20774 20818 20817 0281 20282 0122 C 3615 1478 20478 12556 20435 20439 1492 20438 0786 0786 A 20287 20285 20856 1602 22 23 24 25# 26# 27# 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 20988 20514 1662 20275 1118 20279 21017 1493 12567 2942 20434 20845 1116 10133 20392 20471 1261 20280 20819 20299 20301 20421 A8638 PART NAME QTY.
BA-SERIES TROWEL — QUICK-PITCH™ HANDLE QUICK-PITCH ™ T-HANDLE 2 3 25 55 4 1 20 19 5 18 26 21 14 DETAIL “A” 22 58 3 6 10 24 25 17 SEE DETAIL “A” 7 8 26 16 9 10 60 23 59 27 15 11 SEE DETAIL “B” 28 11 ASM 54 46 12 48 13 49 ASM 50 30 45 29 57 31 3 6 51 47 2 32 43 44 33 1 34 52 42 38 DETAIL “B” 40 41 39 37 36 35 56 53 1 APPLY THREAD LOCK (LOCTITE 242 BLUE OR EQUIVALENT). 2 PART OF ENGINE ASSEMBLY.
BA-SERIES TROWEL — QUICK-PITCH™ HANDLE QUICK-PITCH HANDLE NO. 1 2 3 4 5 6 7 8* 9* 10* 11 12* 13* 14 15 16 17 18 19+ 20+ 21+ 22+ 23+ 24 25 26 27 28 29 30 31 32 33 34 35# 36# 37# 38 39 40 PART NO. 20463 20774 20478 12556 20526 20435 20527 20389 1746 12405 1729 1706 20437 4568 1711 1719 20439 20438 1731 20443 1709 20269 20276 20856 1602 20988 20514 20297 2942 1715 20270 1735 21017 1662 20275 1118 20279 1493 1737 1733 PART NAME QTY.
BA-SERIES TROWEL — QUICK PITCH™ HANDLE QUICK PITCH HANDLE NO. 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 PART NO. 1736 1718 1732 1717 12642 1758 20845 20434 1261 20471 20392 10133 1116 20390 20293 20280 12645 20421 A8638 20271 PART NAME QTY. REMARKS DECAL, ARROW 1 NUT, QP TRIM CTRL ADJ 1 BOLT, STRIPPER 3/8 X 1/2 1 SCREW, QP TRIM ADJUSTMENT 1 TUBE, MAIN HANDLE 1 DECAL, PATENT QP 1 SWIVEL, ENGINE THROTTLE CABLE 1 HOUSING, THROTTLE CABLE 1.88 m (74”) 1 DECAL, CAUTION, LIFT HANDLE ...........
NOTE PAGE BA-SERIES WALK-BEHIND TROWEL — OPERATION & PARTS MANUAL — REV.
BA-SERIES TROWEL — THRUST BEARING KIT ASSY THRUST BEARING KIT ASSEMBLY. PAGE 50 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
BA-SERIES TROWEL — THRUST BEARING KIT ASSY THRUST BEARING KIT ASSEMBLY. NO. 1 * 2 * 3 * 4 * 5 * 6 PART NO. 12208 12778 10793 1471 1154 A 10968 PART NAME WEAR RING FLANGE BEARING THRUST COLLAR W/BUSHING BUSHING LOWER WEAR PLATE THRUST BEARING KIT QTY. 1 1 1 1 1 1 REMARKS INCLUDES ITEM W/ * BA-SERIES WALK-BEHIND TROWEL — OPERATION & PARTS MANUAL — REV.
BA-SERIES TROWEL — 3 AND 4-BLADE SPIDER ASSY 3 AND 4 BLADE SPIDER ASSY PAGE 52 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
BA-SERIES TROWEL — 3 AND 4-BLADE SPIDER ASSY 3 AND 4 BLADE SPIDER ASSY NO. 1 * 2 * 3 * 4 * 5% 6% 7% 8% 9% 10% 11% 12% 12% 13% 14% 15% 16% 17% 18% 19% 20% 21 21 22 23 24 # * PART NO. 12208 12778 10793 1154 A 1157 A 0164 B 1875 1876 0105 0161 C 1156 2827 2828 1163 4164 1316 1161 1322 1456 1167 A 0166 A 1210 1215 1162 A 10968 1471 PART NAME QTY. REMARKS WEAR RING 1 FLANGE BEARING 1 THRUST COLLAR ............................................................. 1 ...........
BA-SERIES TROWEL — GEARBOX AND ENGINE MOUNTS ASSY GEARBOX AND ENGINE MOUNTS ASSY 1 2 1 36 37 35 3 12 13 8 4 39 5 4 6 34 7 38 11 9 7 6 14 2 10 15 17 31 32 16 18 30 6 19 GEARBOX OIL 20 QTY. 1 19 33 40 GEARBOX ASSEMBLY 41 GASKET/SEAL KIT 42 BEARING KIT GEARBOX REQUIRES 283 g (22 U.S.OZ.) OF LUBRICATING OIL FOR OPERATION. 18 32 31 22 1 APPLY THREAD LOCK (LOCTITE 242 BLUE OR EQUIVALENT). 2 APPLY SEALANT (LOCTITE 572 OR EQUIVALENT). 3 TORQUE TO 20.3 N.m (15 LB/FT.
BA-SERIES TROWEL — GEARBOX AND ENGINE MOUNTS ASSY GEARBOX AND ENGINE MOUNTS ASSY NO. 1%* 2% 3% 4%* 5%* 6%# 7%# 8% 9% 10% 11% 12 13 14% 15% 16% 17% 18%# 19%# 20% 21% 22% 23 24%* 25%* 26% 27% 28% 29%* 30 31 32 33 34 35 PART NO.
BA-SERIES TROWEL — GEARBOX AND ENGINE MOUNTS ASSY GEARBOX AND ENGINE MOUNTS ASSY NO. 36 36 36 37 37 37 37 38 39 40 41 42 PART NO. 1958 1965 20536 1964 20954 20545 20558 1247 1245 20407 21046 21047 PART NAME QTY. REMARKS FRONT ENGINE MOUNT (HONDA) 1 FRONT ENGINE MOUNT (ROBIN) 1 FRONT ENGINE MOUNT (BRIGGS) 1 REAR ENGINE MOUNT (HONDA 8HP) 1 REAR ENGINE MNT. (HONDA W/HAND CLUTCH) 1 REAR ENGINE MOUNT (ROBIN) 1 REAR ENGINE MOUNT (BRIGGS) 1 GROMMET 1/4 X .875 ID X 1-5/8 OD 4 BUSHING, GUARD RING 4 GEARBOX ASSY...
NOTE PAGE BA-SERIES WALK-BEHIND TROWEL — OPERATION & PARTS MANUAL — REV.
BA-SERIES TROWEL — ENGINES, HONDA, ROBIN, BRIGGS & STRATTON ENGINES, 5.96 Kw HONDA, 5.96 Kw ROBIN, & 5.96 Kw HP BRIGGS AND STRATTON ENGINES, 8 HP HONDA, 8 HP ROBIN, & 8 HP BRIGGS AND STRATTON PAGE 58 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
BA-SERIES TROWEL — ENGINES, HONDA, ROBIN, BRIGGS & STRATTON ENGINES, 5.96 Kw HONDA, 5.96 Kw ROBIN, & 5.96 Kw HP BRIGGS AND STRATTON ENGINES, 8 HP HONDA, 8 HP ROBIN, & 8 HP BRIGGS AND STRATTON NO. 1 1 1 2 3 4* 5* 6* 7* 8* 9* 10* 11* 12 13 14 15 16 17 18 19 20 21 PART NO. 1387 20469 1256 0310 0250 0252 0251 0458 0454 0855 0253 0457 0456 0261 1127 1335 0181 B 2577 0300 B 0161 C 10181 1391 28 0152 1 PART NAME QTY. REMARKS ENGINE 5.96 kW HONDA 1 ENGINE 5.96 kW B & S 1 ENGINE 5.
BA-SERIES TROWEL — MANUAL CLUTCH ASSY CE COMPLIANT OPTION MANUAL CLUTCH ASSY- CE COMPLIANT OPTION 1 2 13 4 3 4 6 10 5 9 25 24 12 26 23 7 22 21 14 4 20 19 11 1 8 8 16 17 16 18 15 SEE GEARBOX AND ENGINE 1 MOUNTS ITEM 36 PAGE 52. PAGE 60 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
BA-SERIES TROWEL — MANUAL CLUTCH ASSY CE COMPLIANT OPTION MANUAL CLUTCH ASSY- CE COMPLIANT OPTION NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 PART NO. PART NAME QTY. REMARKS 1387 ENGINE DR ASSY 5.96kW HONDA 1 10036 CLUTCH ASSIST HANDLE ASSY 1 6014 C HEX FINISH NUT 5/16-24 1 0300 B FLAT WASHER 5/16” 5 10181 SCREW, HHC 5/16-24X1.1/4” 1 10450 SHSS 10-32X1/4” 1 0310 KEY, CLUTCH 1/4 x 1/4 x 1.
BA-SERIES TROWEL — GUARD RING ASSY GUARD RING ASSY PAGE 62 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
BA-SERIES TROWEL — GUARD RING ASSY GUARD RING ASSY NO. 1 PART NO. 2273 2 2 1489 1490 PART NAME QTY. REMARKS STATIONARY GUARD RING ................................ 1 ......... SAFETY ITEM, .......................................................................................... REPLACES P/N 1244 SPIDER PLATE ASSY 16-1/2" ARM (EXT) ........ 1 ......... 3-BLADE MODEL SPIDER PLATE ASSY 16 1/2" ARM (EXT) ........ 1 ......... 4-BLADE MODEL BA-SERIES WALK-BEHIND TROWEL — OPERATION & PARTS MANUAL — REV.
BA-SERIES TROWEL — STABILIZER RING ASSY STABILIZER RING ASSY SEE DETAIL “A” 5 4 DETAIL “A” 1 4 3 1 1 2 1 APPLY LOCTITE 242 BLUE OR EQUIVALENT. PAGE 64 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
BA-SERIES TROWEL — STABILIZER RING ASSY STABILIZER RING ASSY NO PART NO 1 0161 C 2 1237 3 1723 4 6014 C 5 1482 5 1483 PART NAME QTY. REMARKS WASHER, LOCK, 5/16 MED 4 SCREW, SCH 5/16-18 X 7/8 ........... 4 .......... NYL, NP ROD END, 5/16-24 MALE 4 NUT, HEX FINISH 5/16-24 8 RING, STABILIZER, ........................ 1 .......... 368 mm/14-1/2" ARM ...................................................................... 3-BLADE MODEL, REPLACES P/N 1234 RING, STABILIZER, ........................ 1 ..........
BA-SERIES TROWEL — BLADES & ADJUSTMENT FIXTURE ASSY (OPTIONS) BLADES & ADJUSTMENT FIXTURE ASSY PAGE 66 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
BA-SERIES TROWEL — BLADES & ADJUSTMENT FIXTURE ASSY BLADES & ADJUSTMENT FIXTURE ASSY NO. PART NO. PART NAME QTY. REMARKS 20 COMBO FLOAT & FINISH BLADE ........... 3,4 .... CONTACT UNIT SALES DEPT./ACC. ITEM 20 ENDURO COMBO FLOAT &FINISH BLD . 3,4 .... CONTACT UNIT SALES DEPT./ACC. ITEM 21 FLOAT BLADE .......................................... 3,4 .... CONTACT UNIT SALES DEPT./ACC. ITEM 22 FINISH BLADE ......................................... 3,4 .... CONTACT UNIT SALES DEPT./ACC.
BA-SERIES TROWEL — LIFTING BALE ASSY (OPTION) LIFTING BALE ASSY (OPTION) PAGE 68 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
BA-SERIES TROWEL — LIFTING BALE ASSY (OPTION) LIFTING BALE ASSY (OPTION) NO. PART NO. PART NAME QTY. REMARKS 1 LIFTING BALE ASSY ..................... 1 .......... SAFETY ITEM ...................................................................... CONTACT UNIT SALES DEPT./ACC. ITEM 2 10229 HHCS 5/16-24X1" 4 3 0161 C LOCK WASHER 5/16" 4 4 LIFTING BALE ASSY ..................... 1 .......... SAFETY ITEM ...................................................................... CONTACT UNIT SALES DEPT. /ACC.
HONDA GX-240K1 ENGINE — AIR CLEANER ASSY AIR CLEANER ASSY PAGE 70 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
HONDA GX-240K1 ENGINE — AIR CLEANER ASSY AIR CLEANER ASSY NO. 1 2 2 3 3 5 6 8 9 10 12 13 14 15 PART NO. 16271ZE2000 17210ZE2505 17210ZE2822 17218ZE2505 17218ZE2821 17231ZH9820 17232891000 17238ZE2310 17239ZE1000 17410ZE2020 90203ZA0800 90325044000 90009ZE2003 9405006000 PART NAME GASKET, ELBOW ELEMENT, AIR CLEANER, DUAL ELEMENT, AIR CLEANER, DUAL FILTER, OUTER FILTER, OUTER COVER, AIR CLEANER GROMMET, AIR CLEANER COLLAR, AIR CLEANER COLLAR B, AIR CLEANER ELBOW COMP.
HONDA GX-240K1 ENGINE — CAMSHAFT ASSY CAMSHAFT ASSY PAGE 72 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
HONDA GX-240K1 ENGINE — CAMSHAFT ASSY CAMSHAFT ASSY NO. 1 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PART NO. 14100ZE2W00 14100ZE2W01 14100ZE2306 14410ZE2013 14431ZE2010 14441ZE2000 14451ZE1013 14568ZE1000 14711ZE2000 14721ZE2000 14751ZE2003 14771ZE2000 14773ZE2000 14781ZE2000 14791ZE2010 90012ZE0010 90206ZE1000 PART NAME CAMSHAFT ASSY CAMSHAFT ASSY CAMSHAFT ROD PUSH ARM VALVE ROCKER LIFTER VALVE PIVOT ROCKER ARM SPRING, WEIGHT RETURN VALVE, IN. VALVE, EX. SPRING, VALVE RETAINER, IN. VALVE SPRING RETAINER, EX.
HONDA GX-240K1 ENGINE — CARBURETOR ASSY CARBURETOR ASSY PAGE 74 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
HONDA GX-240K1 ENGINE — CARBURETOR ASSY CARBURETOR ASSY NO. 1 2 3 4 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 19 19 20 20 21 22 23 24 24 25 26 26 26 27 28 PART NO.
HONDA GX-240K1 ENGINE — CONTROL ASSY CONTROL ASSY PAGE 76 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
HONDA GX-240K1 ENGINE — CONTROL ASSY CONTROL ASSY NO. 2 3 4 5 8 10 11 12 13 14 15 16 17 19 20 21 24 26 27 PART NO.
HONDA GX-240K1 ENGINE — CRANKCASE COVER ASSY CRANKCASE COVER ASSY PAGE 78 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
HONDA GX-240K1 ENGINE — CRANKCASE COVER ASSY CRANKCASE COVER ASSY NO. 2 3 3 4 5 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 PART NO.
HONDA GX-240K1 ENGINE — CRANKSHAFT ASSY CRANKSHAFT ASSY PAGE 80 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
HONDA GX-240K1 ENGINE — CRANKSHAFT ASSY CRANKSHAFT ASSY NO. 2 8 10 12 PART NO. 13320ZE2601 13351ZE2010 90745ZE2600 961006206000 PART NAME CRANKSHAFT COMP., Q- TYPE WEIGHT, BALANCER KEY 6.3 X 6.3 X 43 BEARING, RADIAL BALL 6206 QTY. 1 1 1 1 REMARKS BA-SERIES WALK-BEHIND TROWEL — OPERATION & PARTS MANUAL — REV.
HONDA GX-240K1 ENGINE — CYLINDER BARREL ASSY CYLINDER BARREL ASSY PAGE 82 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
HONDA GX-240K1 ENGINE — CYLINDER BARREL ASSY CYLINDER BARREL ASSY NO. 1 2 2 2 3 3 4 5 6 7 8 9 10 11 12 12 13 14 15 16 PART NO.
HONDA GX-240K1 ENGINE — CYLINDER HEAD ASSY CYLINDER HEAD ASSY PAGE 84 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
HONDA GX-240K1 ENGINE — CYLINDER HEAD ASSY CYLINDER HEAD ASSY NO. 1 2 3 4 5 6 7 8 10 11 12 12 13 14 15 16 17 17 17 17 PART NO. 12200ZH9000 12204ZE2306 12205ZE2305 12216ZE2300 12251ZE2800 12310ZE2020 12391ZE2020 14775ZE2010 90014ZE2000 90042ZE2000 90047ZE2000 92900080320E 90441ZE2010 9430112200 950051100130M 957011008000 9807955846 9807955855 9807956846 9807956855 PART NAME QTY. CYLINDER HEAD COMP. 1 GUIDE, VALVE, OS, OPTIONAL 1 GUIDE, EX.
HONDA GX-240K1 ENGINE — FAN COVER ASSY FAN COVER ASSY PAGE 86 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
HONDA GX-240K1 ENGINE — FAN COVER ASSY FAN COVER ASSY NO. 1 2 2 3 4 5 5 7 9 PART NO. 16731ZE2003 19610ZE2010ZA 19610ZE2010ZC 19631ZE2D00 32197ZH8003 36100ZE1015 36100ZH7003 90013883000 90684ZA0601 PART NAME CLIP, TUBE COVER COMP., FAN *R8* BRIGHT RED COVER COMP., FAN *NH1* BLACK SHROUD SUB-HARNESS SWITCH ASSY, ENGINE STOP SWITCH ASSY, ENGINE STOP BOLT, FLANGE 6X12, CT200 CLIP, WIRE HARNESS QTY. 1 1 1 1 1 1 1 6 1 REMARKS BA-SERIES WALK-BEHIND TROWEL — OPERATION & PARTS MANUAL — REV.
HONDA GX-240K1 ENGINE — FLYWHEEL ASSY FLYWHEEL ASSY PAGE 88 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
HONDA GX-240K1 ENGINE — FLYWHEEL ASSY FLYWHEEL ASSY NO. 1 2 4 7 8 PART NO. 19511ZE2000 28450ZE2W11 31100ZE2010 90201ZE3V00 90741ZE2000 PART NAME FAN, COOLING PULLEY COMP., STARTER, SCREEN GRID FLYWHEEL COMP. NUT, SPECIAL 16MM KEY, SPECIAL WOODRUFF 25X18 QTY. 1 1 1 1 1 REMARKS BA-SERIES WALK-BEHIND TROWEL — OPERATION & PARTS MANUAL — REV.
HONDA GX-240K1 ENGINE — FUEL TANK ASSY FUEL TANK ASSY PAGE 90 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
HONDA GX-240K1 ENGINE — FUEL TANK ASSY FUEL TANK ASSY NO. 1 2 3 3 4 5 6 7 8 9 10 11 12 13 14 15 PART NO. 16854ZH8000 16955ZE1000 17510ZE2010ZA 17510ZE2020ZD 17620ZE2W00 17620ZH7023 17631ZH7003 17631329003 17672ZE2W01 17672880000 17673893000 91353671003 9405008000 950014500360M 9500202080 957010802500 PART NAME QTY. RUBBER SUPPORTER 107MM 1 JOINT, FUEL TANK 1 TANK COMP., FUEL *NH31*, MCKINLEY WHITE 1 TANK COMP., FUEL *NH1*, BLACK 1 CAP COMP., FUEL FILLER 1 CAP COMP.
NOTE PAGE PAGE 92 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
HONDA GX-240K1 ENGINE — GASKET KIT GASKET KIT ASSY NO. 1 1 2 3 4 5 6 6 PART NO. 06111ZE2408 11381ZE2800 11381ZE2801 12251ZE2800 12391ZE2020 16221ZA0800 16223ZA0800 18333ZE3800 18333ZK6Y00 PART NAME GASKET KIT GASKET, CASE COVER GASKET, CASE COVER GASKET, CYLINDER HEAD GASKET, CYLINDER HEAD COVER GASKET, CARBURETOR GASKET, INSULATOR GASKET, EX. PIPE GASKET, EX. PIPE, WACKER QTY. 1 1 1 1 1 1 1 1 1 REMARKS BA-SERIES WALK-BEHIND TROWEL — OPERATION & PARTS MANUAL — REV.
HONDA GX-240K1 ENGINE — IGNITION COIL ASSY IGNITION COIL ASSY PAGE 94 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
HONDA GX-240K1 ENGINE — IGNITION COIL ASSY IGNITION COIL ASSY NO. 1 2 6 8 11 PART NO. 30500ZE2023 30700ZE1013 31512ZE2000 36101ZE1010 90015883000 PART NAME COIL ASSY, IGNITION CAP ASSY, NOISE SUPPRESSOR GROMMET, WIRE WIRE, STOP SWITCH 370MM BOLT, FLANGE 6X28 QTY. 1 1 1 1 2 REMARKS BA-SERIES WALK-BEHIND TROWEL — OPERATION & PARTS MANUAL — REV.
HONDA GX-240K1 ENGINE — MUFFLER ASSY MUFFLER ASSY PAGE 96 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
HONDA GX-240K1 ENGINE — MUFFLER ASSY MUFFLER ASSY NO. 1 2 3 4 5 6 6 7 8 10 11 12 13 14 PART NO. 18310ZE2W00 18320ZE2W01 18323ZE2W00 18330ZE2W00 18331ZE2810 18333ZE3800 18333ZK6Y00 18355ZE2010 18381ZE2W10 90013883000 90050ZE1000 90055ZE1000 90050ZE1000 9405008000 PART NAME MUFFLER COMP. PROTECTOR COMP., MUFFLER PROTECTOR, EX. PIPE PIPE, EX. CAP, MUFFLER GASKET, EX. PIPE GASKET, EX.
HONDA GX-240K1 ENGINE — PISTON ASSY PISTON ASSY PAGE 98 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
HONDA GX-240K1 ENGINE — PISTON ASSY PISTON ASSY NO. 1 1 1 1 1 2 2 2 2 3 4 4 5 6 PART NO. 13010ZE2013 13011ZE2013 13011ZE2014 13012ZE2013 13013ZE2013 13101ZE2W00 13102ZE2W00 13103ZE2W00 13104ZE2W00 13111ZE2000 13200ZE2000 13200ZE2305 90001ZE8000 90551ZE1000 PART NAME RING SET, PISTON, STD. RING SET, PISTON, OS 0.25, OPTIONAL RING SET, PISTON, OS 0.25, OPTIONAL RING SET, PISTON, OS 0.50, OPTIONAL RING SET, PISTON, 0.75, OPTIONAL PISTON, STANDARD PISTON, OS 0.25, OPTIONAL PISTON, OS 0.50, OPTIONAL PISTON, 0.
HONDA GX-240K1 ENGINE — RECOIL STARTER ASSY RECOIL STARTER ASSY PAGE 100 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
HONDA GX-240K1 ENGINE — RECOIL STARTER ASSY RECOIL STARTER ASSY NO. 1 1 2 2 3 4 5 6 7 8 10 11 PART NO. 28400ZE2W01ZA 28400ZE2W01ZB 28410ZE2W01ZA 28410ZE2W01ZB 28421ZE2W01 28422ZE2W01 28441ZE2W01 28442ZE2W01 28443ZE2W01 28444ZE2W01 28461ZE2W02 28462ZE2W01 11 12 13 14 28462ZE2W11 28469ZE2W01 90004ZE2W01 90008ZE2003 PART NAME STARTER ASSY, RECOIL *R8* BRIGHT RED STARTER ASSY, RECOIL *NH1*, BLACK CASE COMP., RECOIL STARTER *R8* BRT. RED CASE COMP.
HONDA GX-240K1 ENGINE — TOOLS TOOLS ASSY PAGE 102 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
HONDA GX-240K1 ENGINE — TOOLS TOOLS ASSY NO. 4 PART NO. 89218ZE1000 PART NAME WRENCH COMP., SPARK PLUG QTY. 1 REMARKS BA-SERIES WALK-BEHIND TROWEL — OPERATION & PARTS MANUAL — REV.
HONDA GX-240K1 ENGINE — LABELS LABELS ASSY PAGE 104 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
HONDA GX-240K1 ENGINE — LABELS LABELS ASSY NO. 1 2 3 5 8 8 15 16 PART NO. 87521ZE2W01 87522ZE1810 87522ZH9000 87528ZE2810 87532ZB4G60 87532ZB4H50 87586ZH7W00 87532ZH8810 PART NAME EMBLEM, INTERNAL MARK, CAUTION, EXTERNAL LABEL, CAUTION MARK, CHOKE, EXTERNAL MARK, OIL ALERT, GERMAN MARK, OIL ALERT, FRENCH LABEL, FUEL CAUTION MARK, OIL ALERT, E QTY. 1 1 1 1 1 1 1 1 REMARKS BA-SERIES WALK-BEHIND TROWEL — OPERATION & PARTS MANUAL — REV.
ROBIN EH25-2 ENGINE — CRANKCASE ASSY CRANKCASE ASSY PAGE 106 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
ROBIN EH25-2 ENGINE — CRANKCASE ASSY CRANKCASE ASSY NO. 10 20 30 40 45 50 55 60 80 90 210 220 230 235 250 260 270 -280 290 300 330 340 610 620 630 680 690 700 710 810 820 830 840 850 960 PART NO.
ROBIN EH25-2 ENGINE — CRANKSHAFT ASSY CRANKSHAFT ASSY PAGE 108 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
ROBIN EH25-2 ENGINE — CRANKSHAFT ASSY CRANKSHAFT ASSY NO. 10 40 50 60 70 210 310 320 350 360 370 380 PART NO. 2542090101 2542100101 2542120101 2542020101 2542030101 2542070101 0230300170 0230300180 0230300190 0021808000 0032018000 0323030010 2542410103 2542250100 2462300103 2702330103 2702340103 2702340203 2702340303 2542350107 2542350207 2542350307 0565180010 PART NAME QTY. REMARKS CRANKSHAFT CP ..................................... 1................... SAE 1” KEYED SHAFT CRANKSHAFT CP .................
ROBIN EH25-2 ENGINE — INTAKE AND EXHAUST ASSY INTAKE AND EXHAUST ASSY PAGE 110 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
ROBIN EH25-2 ENGINE — INTAKE AND EXHAUST ASSY INTAKE AND EXHAUST ASSY NO. 10 35 36 37 50 60 70 80 90 95 210 220 230 240 260 310 320 340 350 360 363 365 430 440 445 500 505 510 -2 -3 510 -2 -13 -520 520 540 555 556 560 570 580 650 PART NO.
ROBIN EH25-2 ENGINE — GOVERNOR ASSY GOVERNOR ASSY PAGE 112 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
ROBIN EH25-2 ENGINE — GOVERNOR ASSY GOVERNOR ASSY NO. 10 20 30 40 50 60 70 80 310 320 330 340 345 346 350 360 370 380 410 440 450 PART NO. 2544230123 2464220123 2544270101 2544280103 0031306000 0011406300 0186060020 2544250113 2704330200 2704330100 2704330201 2704330101 2274360103 2704350103 0043104250 2694550303 2274500203 0043106300 0022706000 0110060050 0110060030 2544420123 0043104080 0022706000 PART NAME QTY.
ROBIN EH25-2 ENGINE — COOLING AND STARTING ASSY COOLING AND STARTING ASSY PAGE 114 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
ROBIN EH25-2 ENGINE — COOLING AND STARTING ASSY COOLING AND STARTING ASSY NO. 10 20 40 45 90 210 -1 -2 -3 -4 -5 -6 -11 -35 -49 220 PART NO. 2545345001 2545355011 2709170303 0110060020 0732004950 2545270103 2705020100 2705011508 2705012008 2705011008 2615010008 2705012508 2275013108 2705014508 2705026108 2275015208 0110060010 PART NAME QTY. REMARKS BLOWER HOUSING CP ....................... 1 ............. BLACK BLOWER HOUSING CP ....................... 1 .............
ROBIN EH25-2 ENGINE — FUEL TANK ASSY FUEL TANK ASSY PAGE 116 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
ROBIN EH25-2 ENGINE — FUEL TANK ASSY FUEL TANK ASSY NO. 10 20 30 40 50 -1 -2 -3 -4 -8 -15 70 80 90 105 PART NO. 2546105011 0732003900 0430430015 0641360010 0642008600 0642004110 0642001430 0642001410 0642002360 0642002790 0642003230 2346260101 0851060000 0561110020 0011308200 PART NAME QTY. REMARKS FUEL TANK CP ..................................... 1 .............
ROBIN EH25-2 ENGINE — CARBURETOR ASSY CARBURETOR ASSY PAGE 118 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
ROBIN EH25-2 ENGINE — CARBURETOR ASSY CARBURETOR ASSY NO. 210 -1 -2 -3 -4 -5 -6 -7 -8 -9 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -22 -23 -24 -32 -40 -41 -61 -62 -89 -101 -121 PART NO.
ROBIN EH25-2 ENGINE — RECOIL START ASSY RECOIL START ASSY PAGE 120 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
ROBIN EH25-2 ENGINE — RECOIL START ASSY RECOIL START ASSY NO. 10 11 30 60 70 90 100 110 PART NO. 2347020111 2547943021 0011406250 0660000361 0150040090 0566000190 0566120050 0650140031 0650140150 0650141030 RL86C 0655000051 PART NAME QTY. REMARKS FLYWHEEL CP 1 IGNITION COIL CP 1 BOLT AND WASHER ASSY 2 SWITCH ASSY 1 TAPPING SCREW 2 CLAMP 1 CLAMP .................................................. 1 ............. W/OIL SENSOR SPARK PLUG ........................................ 1 .............
ROBIN EH25-2 ENGINE — OIL SENSOR ASSY OIL SENSOR ASSY PAGE 122 — BA-SERIES WALK-BEHIND TROWEL— OPERATION & PARTS MANUAL — REV.
ROBIN EH25-2 ENGINE — OIL SENSOR ASSY OIL SENSOR ASSY NO. 700 760 790 PART NO. KS31102801 2147312201 2147900301 PART NAME QTY. REMARKS OIL SENSOR CP 19 ............................. 1 ............. W/OIL SENSOR WIRE 22 CP .......................................... 1 ............. W/OIL SENSOR CLAMP CP ............................................ 1 ............. W/OIL SENSOR BA-SERIES WALK-BEHIND TROWEL — OPERATION & PARTS MANUAL — REV.
TERMS AND CONDITIONS OF SALE — PARTS Effective: October 1, 2002 PAYMENT TERMS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Muiltiquip part numbers clearly marked. PRICING AND REBATES a. Obsolete parts. (If an item is in the price book and shows as being replaced by another item, it is obsolete.) Prices are subject to change without prior notice.
NOTE PAGE BA-SERIES WALK-BEHIND TROWEL — OPERATION & PARTS MANUAL — REV.
OPERATION & PARTS MANUAL HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING UNITED STATES MULTIQUIP CORPORATE OFFICE 18910 Wilmington Ave. Tel. (800)-421-1244 Carson, CA 90746 Fax (310)-537-3927 Contact: mq@multiquip.com MEXICO MQ CIPSA Carr. Fed. Mexico-Puebla KM 126.5 Tel. (52) 222-225-9900 Momoxpan, Cholula, Puebla 72760 Mexico Fax (52) 222-285-0420 Contact: pmastretta@cipsa.com.mx UNITED KINGDOM MULTIQUIP (UK) LIMITED HEAD OFFICE Hanover Mill, Fitzroy Street, Tel.
