OPERATION AND PARTS MANUAL MULTIQUIP/STOW MODEL: BP-25H CE GASOLINE BACKPACK VIBRATOR (Honda Gasoline Engine) Revision #4 (12/19/07) THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
BP-25H CE GASOLINE VIBRATOR — SILICOSIS/RESPIRATORY WARNINGS PAGE 2 — BP-25H CE GASOLINE VIBRATOR — OPERATION MANUAL — REV.
BP-25H CE GASOLINE VIBRATOR — TABLE OF CONTENTS Multiquip BP-25H CE Honda GXH50QXA Engine Concrete Gasoline Vibrator Air Cleaner Assembly......................................... 36-37 Camshaft Assembly ........................................... 38-39 Carburetor Assembly ......................................... 40-41 Control Assembly ............................................... 42-43 Crankcase Cover Assembly ............................... 44-45 Crankshaft/Balancer Assembly .........................
BP-25H GAS VIBRATOR — SPECIFICATIONS (NOISE AND VIBRATION) EC Declaration of Conformity We of Multiquip (UK) Ltd.
BP-25H CE GASOLINE VIBRATOR — SPECIFICATIONS (ENGINE) Table 1. Specifications (Engine) Model HONDA GXH50QXA Type 4 stroke, Single Cylinder, OHV, Gasoline Engine Bore X Stroke 1.65 in. x 1.42 in. (41.8 mm x 36 mm) Displacement 49 cm3 (3.0 cu-in) Max Output 2.5 H.P./7,000 R.P.M. Fuel Tank Capacity Approx. 0.32 U.S. gallons (1.2 liters) Fuel Unleaded Gasoline Octane Rating of 86 or Higher Engine Lube Oil Capacity 0.26 qts (.
BP-25H CE GASOLINE VIBRATOR — DIMENSIONS Figure 1. Dimensions (Frame) TABLE 2. Dimensions (Frame) Reference Letter Dimension ft. (mm.) A 23.0 in. (584 mm.) B 13.75 in. (349 mm.) C 13.0 in. (330 mm.) D 21.0 in. (533 mm.) PAGE 6 — BP-25H CE GASOLINE VIBRATOR — OPERATION MANUAL — REV.
BP-25H CE GASOLINE VIBRATOR — SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others. This Owner's Manual has been developed to provide complete instructions for the safe and efficient operation of the Multiquip Model BP25H CE Gasoline Backpack Vibrator.
BP-25H CE GASOLINE VIBRATOR — SAFETY MESSAGE ALERT SYMBOLS WARNING - ROTATING PARTS NEVER operate equipment with covers, or guards removed. Keep fingers, hands, hair and clothing away from all moving parts to prevent injury. CAUTION - ACCIDENTAL STARTING ALWAYS place the engine ON/OFF switch in the OFF position when the vibrator is not in use. CAUTION - OVER-SPEED CONDITIONS NEVER tamper with the factory settings of the engine governor or settings.
BP-25H CE GASOLINE VIBRATOR — RULES FOR SAFE OPERATION DANGER - READ THIS MANUAL! Failure to follow instructions in this manual may lead to serious injury or even DEATH! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the vibrator. GENERAL SAFETY ■ DO NOT operate or service this equipment before reading this entire manual.
BP-25H CE GASOLINE VIBRATOR — RULES FOR SAFE OPERATION ■ NEVER run engine without air cleaner. Severe engine damage may occur. ■ ALWAYS read, understand, and follow procedures in Operator’s Manual before attempting to operate equipment. ■ ALWAYS be sure the operator is familiar with proper safety precautions and operating techniques before using vibrator. ■ ALWAYS store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children.
BP-25H CE GASOLINE VIBRATOR — GENERAL INFORMATION General Information The BP-25H CE utilizes a 2.5 HP Honda GXH50 4-stroke, overhead valve, single cylinder, gasoline engine. The vibrator comes standard with a quick-disconnect coupling for easy removal of the flexible shaft. In addition, the frame is mounted on rubber isolators (3) to help reduce engine vibration. When operating the BP-25H CE Vibrator, always wear rubber insulated gloves and boots. Safety glasses and ear protection are also recommended.
BP-25H CE GASOLINE VIBRATOR — VIBRATOR COMPONENTS Figure 3. BP-25H CE Gasoline Vibrator Application 1. Hard Hat – Always wear a hard hat for head protection. 8. 2. Safety Glasses – Always wear safety glasses to protect eyes from foreign matter and debris. Quick Disconnect Fitting – Allows for the quick and easy removal of the flexible shaft from the vibrator. 9. Throttle Grip – Turn clockwise (rabbit) to increase engine speed, turn counterclockwise (turtle) to decrease engine speed. 3.
BP-25H CE GASOLINE VIBRATOR — ENGINE COMPONENTS INITIAL SERVICING The engine (Figure 4) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturer’s engine manual for instructions and details of operation and servicing. Figure 4. Honda GXH50 Engine Components 1. Choke Lever – Used in the starting of a cold engine, or 8. Fuel Tank/Fuel Filler Cap – Fuel tanks holds 0.32 in cold weather conditions. The choke enriches the fuel gallons (1.
BP-25H CE GASOLINE VIBRATOR — INSPECTION (ENGINE) Before Starting Before starting and operating the BP-25H CE Gasoline Vibrator, perform the following: ■ ■ ■ ■ ■ ■ ■ ■ Read safety instructions at the beginning of the manual. Clean the engine, removing dirt and dust, particularly the engine cooling air inlet, carburetor and air cleaner. Check the air filter for dirt and dust. If air filter is dirty, replace air filter with a new one as required. Check carburetor for external dirt and dust.
BP-25H CE GASOLINE VIBRATOR — HEAD AND SHAFT SELECTIONS Flexible Shaft and Vibrator Head Selections WARNING - EQUIPMENT HAZARD Use Tables 4, 5, and 6 when selecting a flexible shaft or vibrator head for your unit. Longer shaft lengths (382V Series only) can be obtained with the use of a shaft coupler (P/N 3883-501). The 314V Series flexible shafts cannot be extended. Never use vibrator heads that are not recommended by the manufacturer as they may create a hazardous condition when using the vibrator.
BP-25H CE GASOLINE VIBRATOR — HEAD AND SHAFT CONNECTIONS Follow the instructions below when connecting the flexible shaft, vibrator head, and vibrator, before using the BP-25H CE. 382V Series Connecting the Flexible Shaft and Vibrating Head GREASING INSTRUCTIONS Perform the following instructions to attach the flexible shaft to 1. Before installing a new flexshaft assembly, pull out the core the vibrator, reference Figure 7: and lightly grease before first use.
BP-25H CE GASOLINE VIBRATOR — HEAD AND SHAFT CONNECTIONS 25H BP- QUICK DISCONNECT SPINDLE KNOB SHAFT 4 (FEMALE) 1 2 3 PARTS ECCENTRIC END BELL QUICK DISCONNECT COUPLER (FEMALE) P/N 36249 MALE 314V SERIES FLEXIBLE SHAFT P/N 29953-001 PIPE THREAD SEALANT D EA HR T N ET PIP EALA S 25H BP- QUICK DISCONNECT SPINDLE SHAFT KNOB (MALE) 4 P/N 25013-001 2 5 VIBRATOR HEAD 3 1 PARTS QUICK DISCONNECT COUPLER (MALE) P/N 36248 FEMALE PIPE THREAD SEALANT 382V SERIES FLEXIBLE SHAFT PIP E SE THR AL EA AN
BP-25H CE GASOLINE VIBRATOR — PROTECTIVE SLEEVE INSTALLATION Casing Coupling Protective Sleeve When rubber vibrator heads are used, it is advisable to place a protective sleeve over the flexible shaft casing coupler. This will protect epoxy coated rebar from being damaged. Please follow the instructions listed below to install the protective sleeve. Reference Figure 8 when performing the installation of the protective sleeve.
BP-25H CE GASOLINE VIBRATOR — INITIAL START-UP (ENGINE) This section is intended to assist the operator with the initial start-up of the BP-25H CE vibrator. It is extremely important that this section be read carefully before attempting to use the vibrator in the field. 4. Place the Ignition ON/OFF switch (Figure 12) in the "ON " position. Starting the Engine 1. Place the engine fuel valve lever (Figure 9) to the "ON" position. Figure 12. Ignition ON/OFF Switch (ON Position) 6.
BP-25H CE GASOLINE VIBRATOR — OPERATION CAUTION - READ MANUAL DO NOT attempt to operate the vibrator until the Safety, General Information and Inspection sections of this manual have been read thoroughly and understood. Backpack Placement 1. With the engine running at idle speed, place the backpack on an elevated flat level surface (workbench or tailgate of a truck). This will enable the operator to place the unit on his back more easily. 2. The backpack unit attaches very much like a hiker’s knapsack.
BP-25H CE GASOLINE VIBRATOR — ENGINE SHUTDOWN Stopping The Engine Normal Shutdown 1. Remove the flexible shaft and vibrator head from the mix. 2. Rotate the throttle grip CCW to the “TURTLE” position (Figure 18) and run the engine for three minutes at idle speed. CCW ROTATION 4. Place the fuel shut-off lever (Figure 20) in the OFF position. DECREASES ENGINE SPEED (IDLE) THROTTLE GRIP Figure 18. Throttle Lever (Turttle/Idle) 3. Press and hold the engine KILL switch (Figure 19) to shutdown the engine .
BP-25H CE GASOLINE VIBRATOR — MAINTENANCE (ENGINE) Engine Maintenance Perform engine maintenance procedures as referenced by Table 7 below: Table 7. Engine Maintenance Schedule DESCRIPTION (3) OPERATION BEFORE CHECK X FIRST EVERY MONTH 3 MONTHS OR OR 10 HRS. 25 HRS. EVERY 6 MONTHS OR 50 HRS. EVERY YEAR OR 100 HRS. EVERY 2 YEARS OR 200 HRS.
BP-25H CE GASOLINE VIBRATOR — MAINTENANCE (ENGINE) Maintenance Instructions To receive trouble-free service from your MQ BP-25H CE gasoline vibrator, follow these instructions, as well as the instructions contained in the engine operating manual, flexible shaft operations manual and the vibrator head operations manual. The flexible shafting requires cleaning and lubrication every 100 hours of operation. See flexible shaft maintenance instructions shipped with shaft.
BP-25H CE GASOLINE VIBRATOR — MAINTENANCE Engine Air Cleaner V-Belt Tension 1. Press the latch tabs on the top of the air cleaner cover and remove the cover and foam filter element as shown in Figure 24. The V-belt (Figure 25) can be adjusted by loosening the bearing block housing screws, and rotating the eccentric end bell housing until the desired tension is achieved.
BP-25H CE GAS VIBRATOR — PREPARATION FOR LONG -TERM STORAGE For storage of the vibrator for over 30 days, the following is required: ■ Drain the fuel tank completely, or add STA-BIL to the fuel. ■ Run the engine until the gasoline in the carburetor is completely consumed. ■ Completely drain the oil from the crankcase and refill with fresh oil. ■ Remove the spark plug, pour 2 or 3 cc of SAE 30 oil into the cylinder and crank slowly to distribute the oil.
BP-25H CE GASOLINE VIBRATOR — TROUBLESHOOTING (ENGINE) Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, use Table 8 (Engine Troubleshooting) and Table 9 (Flexible Shaft Troubleshooting) as basic guideline for troubleshooting. If the problem cannot be remedied, consult our company's business office or service plant. TABLE 8.
BP-25H CE GASOLINE VIBRATOR — TROUBLESHOOTING (ENGINE) TABLE 8. ENGINE TROUBLESHOOTING (Continued) SYMPTOM POSSIBLE PROBLEM SOLUTION Operation not satisfactory Rotational speed fluctuates. Recoil star ter not working properly. Governor adjustment improper? Adjust governor to correct lever. Governor spring defective? Clean or replace ignition. Fuel flow erratic? Check fuel line. Air taken in through suction line? Check suction line. Dust in rotating par t? Clean recoil star ter assembly.
BP-25H CE GASOLINE VIBRATOR — EXPLANATION OF CODE IN REMARKS The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availibility of the parts listed. * * Numbers Used - Item quantity can be indicated by a number, a blank entry, or A/R.
BP-25H CE GASOLINE VIBRATOR — SUGGESTED SPARE PARTS BP-25H CE GASOLINE VIBRATOR 1 TO 3 UNITS W/HONDA GXH50QXA ENGINE Qty. 2 3 3 1 1 3 P/N Description 17211ZM7000 ................ ELEMENT AIR 9805655777 ................... SPARK PLUG (NKG) 28462ZM7003 ................ ROPE STARTER 17620ZL8003 ................. CAP, FUEL S/N 1159947 AND BELOW 17620ZL8013 ................. CAP, FUEL S/N 1159948 AND ABOVE ZT37D5 ..........................
BP-25H CE GASOLINE VIBRATOR — NAMEPLATE AND DECALS ASSY. NAMEPLATE AND DECALS ASSY. PAGE 30 — BP-25H CE GASOLINE VIBRATOR — OPERATION MANUAL — REV.
BP-25H CE GASOLINE VIBRATOR — NAMEPLATE AND DECALS ASSY. NAMEPLATE AND DECALS ASSY. NO. 1# 2# 3# 4# 5# 6# 7 8 9 PART NO. DCLKITBP25 ZT101AE1 ZT101AD1 PART NAME QTY. REMARKS DECAL, MULTI/GASOLINE 1 DECAL, CAUTION 1 DECAL, CE LOGO 1 DECAL, NAMEPLATE ..................................... 1 ........CONTACT MQ PARTS DEPT. DECAL, MQ LOGO 1 DECAL, NOISE LEVEL ................................... 1 ........
BP-25H CE GASOLINE VIBRATOR — VIBRATOR ASSY. VIBRATOR ASSY.ASSY. PAGE 32 — BP-25H CE GASOLINE VIBRATOR — OPERATION MANUAL — REV.
BP-25H CE GASOLINE VIBRATOR — VIBRATOR ASSY. VIBRATOR ASSY. NO. 1 2 3 4 4 * 5 5 * 6 7 8 9 10# 11# 12# 13# 14# 15#% 16 17 18 19 20 21 22 23 24 PART NO. ZT111N109 ZT346T1 ZT1145AN1 36249 36248 29957-001 25013-001 ZT58A29 ZT130A10 ZT127A12 ZT6750K1 ZT389A1 ZT81A78 ZT385B1 ZT90G1 445C1 ZT207R4 ZT130A9 ZT127A11 ZT58A3 ZT363A1 ZT58B3 ZT130A9 ZT386CT1 ZT37D3 ZT229A1 PART NAME QTY. REMARKS 10-32 X 2-3/4” SLOTTED PAN HEAD SCREW 7 BELT GUARD 1 QD ADAPTER .............................................................
BP-25H CE GASOLINE VIBRATOR — FRAME ASSY. FRAME ASSY. 4 3 2 1 5 16 18 17 6 7 8 15 14 9 12 10 13 12 11 PAGE 34 — BP-25H CE GASOLINE VIBRATOR — OPERATION MANUAL — REV.
BP-25H CE GASOLINE VIBRATOR — FRAME ASSY. FRAME ASSY. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 PART NO. ZT316AG2 ZT177S1 ZT6850X1 ZT374AR1 ZT45B1 ZT478C1 ZT130A9 ZT111T28 ZT127A11 ZT58A1 ZT58A27 ZT130A10 ZT72F2 ZT319D1 ZT58A8 ZT74A8 ZT127A11 ZT81F8 PART NAME RH THROTTLE ARM ASSY. KILL SWITCH, MOMENTARY PUSHBUTTON RED ENGINE, HONDA GXH50 FRAME BACKPACK PAD W/VELCRO STRAP BACKPACK SHOULDER STRAP ASSY.
HONDA GXH50QXA ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. PAGE 36 — BP-25H CE GASOLINE VIBRATOR — OPERATION MANUAL — REV.
HONDA GXH50QXA ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. NO. 1 2 3# 4 5 6# 7 8 * 9 PART NO. 17211ZM7000 17220ZM7000 17227ZM7000 17228ZM7000 17230ZM7000 17231ZM7000 90004ZM7000 91503ZM7000 950057000330M PART NAME QTY. REMARKS AIR CLEANER ELEMENT 1 AIR CLEANER HOUSING ............................... 1 ........INCLUDES ITEMS W/ * AIR CLEANER SEAL 1 AIR CLEANER GASKET 1 AIR CLEANER COVER ASSY. ........................ 1 ........
HONDA GXH50QXA ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. PAGE 38 — BP-25H CE GASOLINE VIBRATOR — OPERATION MANUAL — REV.
HONDA GXH50QXA ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. NO. 2 3 3 4 5 6 7 8 9 10 11 12 13 14 PART NO. 14100ZM7010 14126Z0G003 90702P6R008 14410ZM7000 14431ZM7000 14435ZM7003 14451ZM7000 14711ZM7000 14721ZM7000 14731ZM7013 14751ZM7000 14754ZM7000 14771ZM3000 90206KM3000 PART NAME CAMSHAFT ASSY. ROLLER 5X29.8 OIL PUMP PIN PUSH ROD VALVE ROCKER ARM ROLLER 4X37.8 ROCKER ARM PIVOT IN. VALVE EX. VALVE LIFTER VALVE VALVE SPRING LIFTER COLLAR VALVE SPRING RETAINER TAPPET ADJ. NUT QTY.
HONDA GXH50QXA ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. PAGE 40 — BP-25H CE GASOLINE VIBRATOR — OPERATION MANUAL — REV.
HONDA GXH50QXA ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. NO. 1 * 2 * 3 * 7 * 8 * 9 PART NO. 16010ZG1015 16011ZE0005 16013ZG0811 16028ZG0811 16044ZM7003 16100ZM7G11 9 16100ZM7G13 10 * 11 * 13 14 15 16 * 17 * 18 * 19 * 21 22 22 22 * 23 * 24 * 25 * 26 16124ZE0005 16166ZM7003 16211ZM7000 16212ZM7000 16221ZG0801 16953ZG0812 16954ZE1812 16956ZE1811 16957ZE1812 93500030060H 99101ZG00500 99101ZG00520 99101ZG00550 99204ZE20350 16015ZG0811 16024ZE1811 16016ZH7W01 * PART NAME QTY.
HONDA GXH50QXA ENGINE — CONTROL ASSY. CONTROL ASSY. PAGE 42 — BP-25H CE GASOLINE VIBRATOR — OPERATION MANUAL — REV.
HONDA GXH50QXA ENGINE — CONTROL ASSY. CONTROL ASSY. NO. 1 2 3 4 5 * 6 * 7 * 8 * 9 * 10 * 11 * 12 13 14 * 15 * 16 PART NO. 16500ZM7000 16551ZM7000 16555ZM7000 16561ZM7000 16562ZM7000 16571ZM7000 16574ZE1000 16575ZH8000 16578ZE1000 16580ZM7000 16584ZE3790 90003892000 90015ZE5010 90114SA0000 93500050200A 9405006000 PART NAME QTY. REMARKS CONTROL ASSY. ............................................ 1 ........
HONDA GXH50QXA ENGINE — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. PAGE 44 — BP-25H CE GASOLINE VIBRATOR — OPERATION MANUAL — REV.
HONDA GXH50QXA ENGINE — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. NO. 1 1 2 3 4 5 6 7 8 PART NO. 11340ZM7801 11340ZM7802 16510ZM7000 16531ZM7000 90006ZM7000 90441ZM7000 90602ZM7000 91202HC5005 9430106100 PART NAME QTY. REMARKS CRANKCASE SIDE COVER ............................ 1 ........S/N 1199157 AND BELOW CRANKCASE SIDE COVER ............................ 1 ........S/N 1199158 AND ABOVE GOVERNOR ASSY. 1 GOVERNOR SLIDER 1 FLANGE BOLT, 5X23 6 WASHER, 4.
HONDA GXH50QXA ENGINE — CRANKSHAFT/BALANCER ASSY. CYLINDER BARREL ASSY. PAGE 46 — BP-25H CE GASOLINE VIBRATOR — OPERATION MANUAL — REV.
HONDA GXH50QXA ENGINE — CRANKSHAFT/BALANCER ASSY. CRANKSHAFT/BALANCER ASSY. NO. 2 3 4 * 5 PART NO. 13310ZM7800 13331ZM7000 961006203000 90741ZM7000 PART NAME QTY. REMARKS CRANKSHAFT ................................................. 1 ........INCLUDES ITEMS W/ * SPECIAL KEY 1 RADIAL BALL BEARING 1 KEY 4.78MM, OPTIONAL 1 BP-25H CE GASOLINE VIBRATOR — OPERATION MANUAL— REV.
HONDA GXH50QXA ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. PAGE 48 — BP-25H CE GASOLINE VIBRATOR — OPERATION MANUAL — REV.
HONDA GXH50QXA ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 13 14 PART NO. 12100ZM7000 12311ZM7000 15571ZM7003 15572ZM7000 16541ZM7000 19631ZM7000 90003892000 90443ZC3000 91231ZC3003 93500030050A 9425106000 9622060150 9805655757 9805655777 90003892000 PART NAME CYLINDER HEAD COVER OIL OUTLET VALVE STOPPER PLATE GOVERNOR ARM SHAFT SHROUD FLANGE BOLT 5X12 WASHER 5.
HONDA GXH50QXA ENGINE — FAN COVER ASSY. FAN COVER ASSY. PAGE 50 — BP-25H CE GASOLINE VIBRATOR — OPERATION MANUAL — REV.
HONDA GXH50QXA ENGINE — FAN COVER ASSY. FAN COVER ASSY. NO. 1 2 3 PART NO. 19610ZM7000ZA 90042ZM7000 90043ZM7000 PART NAME FAN COVER *R8* BRIGHT RED STUD BOLT A STUD BOLT B QTY. 1 2 1 REMARKS BP-25H CE GASOLINE VIBRATOR — OPERATION MANUAL— REV.
HONDA GXH50QXA ENGINE — FLYWHEEL + IGNITION COIL ASSY. FLYWHEEL AND IGNITION COIL ASSY. PAGE 52 — BP-25H CE GASOLINE VIBRATOR — OPERATION MANUAL — REV.
HONDA GXH50QXA ENGINE — FLYWHEEL AND IGNITION COIL ASSY. FLY WHEEL AND IGNITION COIL ASSY. NO. 1 2 3 4 5 6 7 8 10 11 12 13 14 PART NO. 30500ZM7004 31110ZM7004 32195ZM7800 34150ZH7003 35124ZM7800 35480ZM7801 36100ZE1015 90004ZC3000 90012896750 90684ZA0601 91301ZA8003 9405010000 957010600800 PART NAME IGNITION COIL ASSY. FLYWHEEL STOP SWITCH WIRE OIL ALERT UNIT STOP SWITCH BRACKET OIL LEVEL SWITCH ASSY. ENGINE STOP SWITCH ASSY.
HONDA GXH50QXA ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 54 — BP-25H CE GASOLINE VIBRATOR — OPERATION MANUAL — REV.
HONDA GXH50QXA ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. NO. 1 2 3 4 5 6 6 7 8 9 10 11 PART NO. 16952ZE6000 17511ZM7000 17532ZM7000 17533ZM7000 17560ZM7000 17620ZL8003 17620ZL8013 17701ZM7000 19052MB4880 8599292979 9500202120 957010602007 PART NAME QTY. REMARKS FUEL FILTER 1 FUEL TANK 1 TANK MOUNTING RUBBER A 2 TANK MOUNTING RUBBER B 1 FUEL TANK STAY 1 FUEL TANK CAP ASSY. .................................. 1 ........S/N 1159947 AND BELOW FUEL TANK CAP ASSY. .................................. 1 ........
HONDA GXH50QXA ENGINE — OIL CASE ASSY. OIL CASE ASSY. PAGE 56 — BP-25H CE GASOLINE VIBRATOR — OPERATION MANUAL — REV.
HONDA GXH50QXA ENGINE — OIL CASE ASSY. OIL CASE ASSY. NO. 1 2 3# 4 5 6 * 7 PART NO. 11300ZM7800 15600ZM7003 15625ZE1003 90006ZM7000 90471580000 91202HC5005 957010801208 PART NAME QTY. REMARKS OIL CASE ASSY. ............................................. 1 ........INCLUDES ITEMS W/ * OIL FILLER CAP ASSY. .................................. 1 ........
HONDA GXH50QXA ENGINE — PISTON AND CONNECTING ROD ASSY. PISTON AND CONNECTING ROD ASSY. PAGE 58 — BP-25H CE GASOLINE VIBRATOR — OPERATION MANUAL — REV.
HONDA GXH50QXA ENGINE — PISTON AND CONNECTING ROD ASSY. PISTON AND CONNECTING ROD ASSY. NO. 1 2 3 4 5 7 * 8 * PART NO. 13010ZM7000 13101ZM7010 13111GS7000 13115147000 13200ZM7000 13281ZM7000 90001ZM7000 PART NAME QTY. REMARKS PISTON RING SET, STANDARD 1 PISTON, STANDARD 1 PISTON PIN 1 PISTON PIN CLIP 2 CONNECTING ROD ASSY. ............................. 1 ........INCLUDES ITEMS W/ * CONNECTING ROD DIPPER 1 CONNECTING ROD BOLT 2 BP-25H CE GASOLINE VIBRATOR — OPERATION MANUAL— REV.
HONDA GXH50QXA ENGINE — RECOIL STARTER ASSY. RECOIL STARTER ASSY. PAGE 60 — BP-25H CE GASOLINE VIBRATOR — OPERATION MANUAL — REV.
HONDA GXH50QXA ENGINE — RECOIL STARTER ASSY. RECOIL STARTER ASSY. NO. 1 2 * 3 * 4 * 5 6 * 7 * 8 * 9 * 10 11 * 12 * 14 * PART NO. 28400ZM7003 28414ZM7003 28421ZM7003 28433ZM3003 28451ZM7003 28459ZM7003 28461ZM3003 28462ZM7003 91504ZM7003 9405005000 90012ZM3003 28404968004 28442ZH8003 PART NAME QTY. REMARKS RECOIL STARTER ASSY. ............................... 1 ........
HONDA GXH50QXA ENGINE — LABELS ASSY. LABELS ASSY. PAGE 62 — BP-25H CE GASOLINE VIBRATOR — OPERATION MANUAL — REV.
HONDA GXH50QXA ENGINE — LABELS ASSY. LABELS ASSY. NO. 4 6 7 PART NO. 87521ZM7000 87528ZG0W40 87532ZM3G00 PART NAME EMBLEM PETCOCK MARK, EXTERNAL THROTTLE INDICATION MARK QTY. 1 1 1 REMARKS BP-25H CE GASOLINE VIBRATOR — OPERATION MANUAL— REV.
HONDA GXH50QXA ENGINE — TOOLS ASSY. TOOLS ASSY. PAGE 64 — BP-25H CE GASOLINE VIBRATOR — OPERATION MANUAL — REV.
HONDA GXH50QXA ENGINE — TOOLS ASSY. TOOLS ASSY. NO. 1 PART NO. 89216130690 PART NAME SPARK PLUG WRENCH, OPTIONAL QTY. 1 REMARKS BP-25H CE GASOLINE VIBRATOR — OPERATION MANUAL— REV.
TERMS AND CONDTIONS OF SALE — PARTS PAYMENT TERMS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Terms of payment for parts are net 30 days. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments are F.O.B. point of origin.
NOTE PAGE BP-25H CE GASOLINE VIBRATOR — OPERATION MANUAL— REV.
OPERATION AND PARTS MANUAL HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING UNITED STATES Multiquip Corporate Office 18910 Wilmington Ave. Tel. (800) 421-1244 Carson, CA 90746 Fax (800) 537-3927 Contact: mq@multiquip.com Mayco Parts 800-306-2926 Fax: 800-672-7877 310-537-3700 Fax: 310-637-3284 Service Department 800-421-1244 Fax: 310-537-4259 310-537-3700 MQ Parts Department 800-427-1244 310-537-3700 MEXICO UNITED KINGDOM MQ Cipsa Carr. Fed. Mexico-Puebla KM 126.