OPERATION AND PARTS MANUAL CUTTER 1 MODEL CD613H18 (HONDA GX390 GASOLINE ENGINE) MODEL CD605E16 (5 HP ELECTRIC MOTOR) CONCRETE/ASPHALT SAW Revision #6 (06/06/08) To find the latest revision of this publication, visit our website at: www.stowmfg.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
STOW CUTTER 1 SAW — PROPOSITION 65 WARNING Engine exhaust and some of its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Some examples of these chemicals are: Leadfromlead-basedpaints. Crystallinesilicafrombricks. Cementandothermasonryproducts. Arsenicandchromiumfromchemically treatedlumber.
NOTES STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 1 SAW — TABLE OF CONTENTS Proposition 65 Warning ............................................. 2 Table Of Contents ..................................................... 4 Parts Ordering Procedures ....................................... 5 Safety Message Alert Symbols .............................. 6-7 Rules For Safe Operation .................................... 8-10 Specifications (Saw) ................................................ 11 Specifications (Engine) .................................
STOW CUTTER 1 SAW — PARTS ORDERING PROCEDURES When ordering parts, please supply the following information: ❒ ❒ ❒ ❒ ❒ ❒ ❒ Dealer account number Dealer name and address Shipping address (if different than billing address) Return fax number Applicable model number Quantity, part number and description of each part Specify preferred method of shipment: ✓ FedEx or UPS Ground Note: Unless otherwise indicated by customer, all ✓ FedEx or UPS Second Day or Third Day orders are treated as “Standard Orders”, and wil
STOW CUTTER 1 SAW — SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others. NOTE This Owner's Manual has been developed to provide complete instructions for the safe and efficient operation of the STOW CUTTER 1 SAW .
STOW CUTTER 1 SAW — SAFETY MESSAGE ALERT SYMBOLS Accidental Starting ALWAYS place the engine ON/OFF switch in the OFF position, when the saw is not in use. Over Speed Conditions NEVER tamper with the factory settings of the engine governor or settings. Personal injury and damage to the engine or equipment can result if operating in speed ranges above maximum allowable. Guards and Covers In Place NEVER operate the saw without blade guards and covers in place.
STOW CUTTER 1 SAW — RULES FOR SAFE OPERATION RULES FOR SAFE OPERATION CAUTION: Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the STOW CUTTER 1 SAW . Unless otherwise noted, these guidelines refer to saws with gasoline powered engines.
STOW CUTTER 1 SAW — RULES FOR SAFE OPERATION General Safety ■ ALWAYS read, understand, and follow procedures in Operator's Manual before attempting to operate equipment. ■ ALWAYS be sure the operator is familiar with proper safety precautions and operating techniques before using the saw. ■ NEVER leave the machine unattended while running. ■ Block the unit when leaving or when using on a slope. ■ MAKE CERTAIN the power cord/extension cord is free from damage and that the grounding circuit is operational.
STOW CUTTER 1 SAW — RULES FOR SAFE OPERATION Saw Transportation Safety Machine Operation And Safety Decals ■ Use appropriate lifting equipment to ensure the safe movement of the saw. The STOW CUTTER 1 SAW is equipped with a number of operation and safety decals. Should any of these decals become unreadable, replacements can be obtained from your dealer. ■ DO NOT use the handle bars and/or front pointer as lifting points.
STOW CUTTER 1 SAW — SPECIFICATIONS (SAW) C B G A F E Side View D Front View Figure 2. STOW CUTTER 1 SAW Dimensions Table 1. Cutter 1 Specifications REFERENCE LETTER DESCRIPTION Max Width Rear Wheel Base Front Wheel Base Handle Bar Width DIMENSION (cm) 37.0 In. (94 cm) 32.0 In. (80 cm) 54.5 In. (138 cm) 21.5 In. (55 cm) 17.0 In. (40 cm) 10.0 In. (25.4 cm) 21.5 In. (55 cm) DESCRIPTION CUTTER 1, 13 HP HONDA ENGINE WEIGHT (KG) 214 lbs. (97 K.
STOW CUTTER 1 SAW — SPECIFICATIONS (ENGINE) Table 2. Specifications (Engine) Model Type HONDA GX390K1QWT2/GX390U1QWT2 Air-cooled 4 stroke, Single Cylinder, OHV, Gasoline Engine Bore X Stroke 3.5 in. X 2.5 in. (88 mm x 64 mm) Displacement 23.7 cu-in. (389 cc) Max Output 13.0 H.P./3600 R.P.M. Engine Fuel Tank Capacity Fuel Lube Oil Capacity Approx. 1.72 U.S. Gallons (6.5 Liters) Unleaded Automobile Gasoline 86 Octane or higher 1.16 US qt (1.
STOW CUTTER 1 SAW — CONTROLS & COMPONENTS CONTROLS & COMPONENTS 8. Figure 3 shows the location of the basic controls or components for the STOW CUTTER 1 SAW. Listed below is a brief explanation of each control or component. (Gasoline-powered unit shown) Cutting Blade – Use appropriate type blades for cutting concrete or asphalt. 9. Blade Guard – Covers saw blade and flips up to allow blade to be changed. 1. 11. Front Pointer – Front pointer wheel assists in straight tracking.
STOW CUTTER 1 SAW — BASIC ENGINE BASIC ENGINE Figure 4. Engine Controls and Components Initial Servicing 6. The engine (Figure 4) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers engine manual for instructions & details of operation and servicing. Choke Lever – Used in the starting of a cold engine, or in cold weather conditions. The choke enriches the fuel mixture. 7. Air Cleaner – Prevents dirt and other debris from entering the fuel system.
STOW CUTTER 1 SAW — PREPARATION/PRE-INSPECTION PREPARATION / PRE-INSPECTION 1. Read and fully understand this manual, the safety instructions in particular, and the engine manufacturer's manual supplied with the saw. WARNING ALWAYS use a grounded (3-wire) extension cord and MAKE CERTAIN that the motor is connected to a properly grounded electric circuit to protect the operator from possible electric shock. 2. Select the correct blade for each application.
STOW CUTTER 1 SAW — PREPARATION/PRE-INSPECTION 3. Insert and remove the dipstick without screwing it into the filler neck. Check the oil level shown on the dipstick. 4. If the oil level is low (Figure 7), fill to the edge of the oil filler hole with the recommended oil type (Table 4). Guards And Covers WARNING NEVER operate the saw without blade guards and covers in place. DO NOT operate with the front of the blade guard raised. The blade exposure cannot exceed 180 degrees during operation.
STOW CUTTER 1 SAW — PREPARATION/PRE-INSPECTION V-belt Alignment and Tensioning This saw is equipped with a premium V-belt that has been aligned and tensioned by factory personnel. The V-belt must be aligned and tensioned for proper operation of the saw. Use the following procedure to check the alignment of V-belt: 1. Remove the bolts that secure the V-belt cover (Figure 9) to the saw frame. Figure 10. Pulley Alignment 3. Check V-belt tension by using a tension meter (3.0 lbs.
STOW CUTTER 1 SAW — BLADES BLADES Saw blades, or cutting disks, are available in either an abrasive design or as diamond blades. Either blade will work on the STOW CUTTER 1 SAW , however, diamond blades are recommended. Ask your dealer about your specific cutting application. SAW BLADE INSPECTION WARNING Failure to thoroughly inspect the diamond blade (Figure 11) for operational safety could result in damage to the blades or the saw and may cause injury to the user or others in the operating area. 1.
STOW CUTTER 1 SAW — BLADE PLACEMENT BLADE PLACEMENT WARNING WARNING Failure to thoroughly inspect the diamond blade for operational safety could result in damage to the blades or the saw and may cause injury to the user or others in the operating area. 1. Blade Guard - Pivot the blade guard front cover all the way back. The guard tension spring will keep the front cover in position. 2.
STOW CUTTER 1 SAW — INITIAL START-UP INITIAL START-UP CAUTION 3. Place the Engine ON/OFF switch (Figure 13) in the "ON" position. DO NOT attempt to operate the saw until the Safety, General Information and Inspection sections of this manual have been read and thoroughly understood. Depending on engine manufacturer, operating steps may vary. See engine manufactures operating manual. CAUTION Figure 13.
STOW CUTTER 1 SAW — INITIAL START-UP/OPERATION 5. Rotate the throttle lever (Figure 15) halfway between fast and slow for starting. All sawing is done at full throttle. The engine governor speed is factory set to ensure optimum blade operating speeds. 8. Before the saw is placed into operation, run the engine for several minutes. Check for fuel leaks, and noises that would associate with a loose guards and/or covers. OPERATION 1. Start the engine. Rotate the throttle lever (Figure 14) toward full throttle.
STOW CUTTER 1 SAW — MAINTENANCE MAINTENANCE 3. Adjust the front pointer wheel so it just touches the side of the straightedge or level. See the engine manual supplied with your machine for appropriate engine maintenance schedule and troubleshooting guide for problems. NOTE 4. Remove the straightedge or level. 5. Position the front pointer and blade directly over the chalk line. 6. Start the saw and lower the blade onto the chalk line. CAUTION! ALWAYS allow the engine to cool before servicing.
STOW CUTTER 1 SAW — MAINTENANCE Dispose of used oil properly. DO NOT pour used oil on the ground, down a drain, or throw in the trash. Used oil can generally be taken to your local recycling center or service station for reclamation. NOTE 4. Make sure the engine is in a level position and fill to the outer edge of the oil filler hole with the recommended oil. (See Table 4.) Engine oil capacity is 1.16 US quart (1.1 liter). 5. Screw in the filler cap/dipstick securely.
STOW CUTTER 1 SAW — TROUBLESHOOTING (SAW) TABLE 5. BLADE TROUBLESHOOTING SYMPTOM Blade slows or stops cutting. Blade does not cut straight and/or true. Blade discoloring, crackling and/or wearing excessively. POSSIBLE PROBLEM SOLUTION Blade too hard for the material being cut? Consult Dealer or Multiquip for correct blade. Try cutting very soft material (sandstone, silica brick, cinder block) to "Redress" the blade. Engine torque diminished because of loose V-belt? Tighten and/or replace V-Belts.
STOW CUTTER 1 SAW — TROUBLESHOOTING (ENGINE) TABLE 6. TROUBLESHOOTING (ENGINE) SYMPTOM Difficult to star t, "fuel is available, but no SPARK at spark plug". Difficult to star t, "fuel is available, and SPARK is present at the spark plug". Difficult to star t, "fuel is available, spark is present and compression is normal". Difficult to star t, "fuel is available, spark is present and compression is low". POSSIBLE CAUSE SOLUTION Spark plug bridging? Check gap, insulation or replace spark plug.
STOW CUTTER 1 SAW — TROUBLESHOOTING (ENGINE) TABLE 6. TROUBLESHOOTING (ENGINE, CONTINUED) SYMPTOM POSSIBLE CAUSE Air cleaner not clean? SOLUTION Clean or replace air cleaner. Check float adjustment. "Weak in power" compression is proper and does not misfire. Improper fuel level in carburetor? Rebuild carburetor. Defective spark plug? Clean or replace spark plug. Improper spark plug gap? Set to proper gap. Water in fuel system? Flush fuel system and replace with correct type fuel.
NOTES STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV.
EXPLANATION OF CODE IN REMARKS COLUMN The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availibility of the parts listed. * * Numbers Used - Item quantity can be indicated by a number, a blank entry, or A/R.
STOW CUTTER 1 SAW — SUGGESTED SPARE PARTS SUGGESTED SPARE PARTS STOW CUTTER 1 SAW CONCRETE/ASPHALT SAW 1 TO 3 UNITS WITH HONDA 13 HP GX390K1QWT2/GX390U1QWT2 ENGINES AND 5HP ELECTRIC MOTOR. 1 to 3 Units Qty. ......P/N ........................... Description 3 20478 ................... HAND GRIP 4 2621 ..................... GREASE ZERK, SPINDLE BEARING 4 1162 A .................. CAP, GREASE ZERK 3 13249 ................... BELT (3VX315) 13HP HONDA 3 16779-006 ............
STOW CUTTER 1 SAW — NAMEPLATE AND DECALS DECALS PAGE 30 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 1 SAW — NAMEPLATE AND DECALS NAMEPLATE AND DECALS NO. PART NO. PART NAME QTY. REMARKS 1 25215-001 DECAL, WARNING .......................... 1 .......... ELECTRIC MODEL ONLY 2 28997-001 DECAL, PROP 65 WARNING 1 3 13118 DECAL, POWDER COATED 1 4 22972-003 DECAL, STOW 6.00 1 5 23653-001 DECAL, STOW CUTTER 1 SAW 1 6 SERIAL NUMBER PLATE ............... 1 .......... CONTACT PARTS DEPT. 7 22122-001 DECAL, WARNING 1 8 25250-001 DECAL, WARNING FEET 1 9 22972-004 DECAL, STOW 7.
STOW CUTTER 1 SAW — ENGINE, BELTS AND PULLEYS ASSY. ENGINE, BELTS AND PULLEYS ASSY. PAGE 32 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 1 SAW — ENGINE, BELTS AND PULLEYS ASSY. ENGINE, BELTS AND PULLEYS ASSY. NO. 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 PART NO. 15103 0669 A 0300 B 5283 23811-352 6059 B 23665-001 25354 13249 23665-009 27044-001 26105-351 0202 161 C 26112-354 9152 10779-011 10133 10136 PART NAME QTY. ENGINE 13 HP HONDA CYCLONE 1 SCREW.
STOW CUTTER 1 SAW — ELECTRIC MOTOR ASSY. ELECTRIC MOTOR ASSY. 1 3 8 2 9 4 10 11 5 11 7 13 6 12 PAGE 34 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 1 SAW — ELECTRIC MOTOR ASSY. ELECTRIC MOTOR ASSY. NO. PART NO. PART NAME 1 26142-352 BELT GUARD 2 16779-006 BELT - 3VX300 3 23665-005 PULLEY (MOTOR) 4 26152-502 MOTOR, 5 HP ELECTRIC 5 27084-002 SPACER 6 23665-009 PULLEY (SPINDLE) 7 26145-351 FRAME 8 25215-001 LABEL, WARNING 9 23865-001 SCREW, 10 - 24 X 3/4 10 2623 SCREW, HHC 5/16 -18 x 1-1/4" 11 07030-005 FLAT WASHER 5/16 12 26136-004 SPINDLE 13 5283 NUT, 5/16 - 18 LOCK QTY.
STOW CUTTER 1 SAW — UNDERCARRIAGE ASSY. UNDERCARRIAGE ASSY PAGE 36 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 1 SAW — UNDERCARRIAGE ASSY. UNDERCARRIAGE ASSY. NO. PART NO.
STOW CUTTER 1 SAW — WATER SYSTEM AND BLADE ASSY. WATER SYSTEM AND BLADE ASSY. 1 2 3 4 5 7 19 20 27 26 17 16 25 16 6 10 9 8 24 28 26 18 2 2 23 21 12 15 11 13 14 22 25 30 29 32 31 35 36 41 30 40 37 33 39 35 38 26 1 PULLEY ASSEMBLY. SEE PAGE 30. 34 37 40 1 PAGE 38 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 1 SAW — WATER SYSTEM AND BLADE ASSY. WATER SYSTEM AND BLADE ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 22129-001 CLAMP 2 2 0948 FLAT WASHER, 1/4 5 3 0181 B LOCK WASHER 1/4 5 4 0949 HEX NUT 1/4 - 20 5 5 0424 SCREW, HHCS 1/4 - 20 X 1 4 6 29406-352 BLADE GUARD 1 7 18626-001 SPRING 2 8 23255-011 HOSE 26" 1 9 23566-001 BARBED FITTING 90 DEG.
STOW CUTTER 1 SAW — POINTER ASSY. POINTER ASSY. PAGE 40 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 1 SAW — POINTER ASSY. POINTER ASSY. NO. PART NO. 1 * 21017 2 29043-001 * 3 * 1007 4 * 1456 5 * 10133 27073-001 6 * 10136 7 * 29042-501 8 PART NAME QTY. REMARKS SCREW, POINTER ARM 1 WHEEL, POINTER 1 NUT, HEX JAM 3/8 - 16 2 NUT, HEX FINISH 3/8 - 16 2 NUT, NYLOC 3/8 - 16 2 ARM, POINTER 1 WASHER, FLAT 3/8 2 INDICATOR ASSEMBLY ................. 1 .......... INCLUDES ITEMS W/ * STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — AIR CLEANER ASSY. AIR CLEANER ASSY. PAGE 42 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — AIR CLEANER ASSY. AIR CLEANER ASSY. NO. 1 ◊ 1◊ 2 3 * 4# 5 6 * 7# 8# 9 10 ◊ 10◊ 11 12 13 14 15 16 PART NO. 16271ZE2000 16271ZE2010 17210ZE3010 17218ZE3000 17219ZE3840 17230ZE3841 17232891000 17238ZE2310 17239ZE3840 17410ZE3840 17470ZE3841 17470ZE3842 17475ZE3841 17476ZE3841 90142MB0000 90325044000 90009ZE2003 9405006000 NOTE PART NAME QTY. REMARKS GASKET, ELBOW 1 GASKET, ELBOW 1 ELEMENT, AIR CLEANER ........................ 1 .........
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CAMSHAFT ASSY. CAMSHAFT ASSY. PAGE 44 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CAMSHAFT ASSY. CAMSHAFT ASSY. NO. 1 2 3 4 5 6 * 7 8 9 10 11 12 13 14 15 16 17 PART NO. 14100ZF6W01 14410ZE3013 14431ZE2010 14441ZE2000 14451ZE1013 14568ZE1000 14711ZE3000 14721ZE3000 14751ZE2003 14771ZE2000 14773ZE2000 14775ZE2010 14781ZE2000 14791ZE2010 90012ZE0010 90206ZE1000 12209ZE8003 PART NAME QTY. REMARKS CAMSHAFT ASSEMBLY .......................... 1 .........
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CARBURETOR ASSY. CARBURETOR ASSY. PAGE 46 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CARBURETOR ASSY. CARBURETOR ASSY. NO. 1 2$ 3$ 4$ 4A+ 5$ 6$> 6A+ 7$ 7A+ 8$ 9$ 10$ 11$ 12$+ 13 14 15 16 20 22$ 23$ 24$ 25$+ 26$ 28$ 31 * 33$ 33$ 33$ 34$ 34A+ 35$ PART NO.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CONTROL ASSY. CONTROL ASSY. PAGE 48 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CONTROL ASSY. CONTROL ASSY. NO. 2 3 4 5 6 10 * 11 * 12 * 13 * 14 * 15 * 17 * 18 * 21 22 24 * 27 * 28 * 29 PART NO. 16551ZE3000 16555ZE3000 16561ZE3000 16562ZE3000 16570ZE3W20 16571ZE3W00 16574ZE1000 16575ZE2W00 16576891000 16578ZE1000 16581ZE3W00 16584883300 16592883310 90013883000 90015ZE5010 90114SA0000 93500050320A 93500050160A 9405006000 PART NAME QTY. REMARKS ARM, GOVERNOR 1 ROD, GOVERNOR 1 SPRING, GOVERNOR 1 SPRING, THROTTLE RETURN 1 CONTROL ASSY. (REMOTE) ......
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CRANKCASE ASSY. CRANKCASE COVER ASSY. PAGE 50 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CRANKCASE ASSY. CRANKCASE COVER ASSY. NO. 2 PART NO. 11300ZE3602 2 11300ZE3604 2◊ ◊ 3 4 5 8# * 9 10>%$+ 11>%$+ 12>%$+ >$% 13 >%$ 13 ◊>%$ 13◊ 15>%$ 16 17>%$ 18>%$ 19 20>%$ 21>%$ 11300ZE3604 11381ZE3801 15600ZG4003 15600735003 15625ZE1003 16510ZE3000 16511ZE8000 16512ZE3000 16513ZE2000 16531ZE2000 16531Z0A000 16531Z0A000 90602ZE1000 90701HC4000 91201ZE3004 9410106800 957010804000 961006202000 961006207000 NOTE PART NAME QTY. REMARKS COVER ASSY.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PAGE 52 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CRANKSHAFT ASSY. CRANKSHAFT ASSY. NO. 2 ◊ 2◊ PART NO. 13310ZF6W10 13310ZF6W11 2◊ ◊ 13310ZF6W12 8 11 12 * ◊# 12◊ ◊+ 12◊ 13351ZE3010 90745ZE2600 91001ZF6003 91001ZF6003 91001ZF6013 NOTE PART NAME QTY. REMARKS CRANKSHAFT .......................................... 1 ......... INCLUDES ITEM W/ * CRANKSHAFT .......................................... 1 ......... INCLUDES ITEM W/# ...............................................................................
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. PAGE 54 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. NO. 1 ◊ 1◊ 2 ◊ 2◊ ◊ 2◊ 4 9 10 12 %# 13 14 17 18 19 20 21%# 22 ◊ 22◊ ◊ 22◊ 23 PART NO. 12000ZF6W13 12000ZF6417 15510ZE2043 15510ZE2043 15510ZE2053 16541ZE3010 90131883000 90446KE1000 91201ZE3004 91203952771 91353671004 9405010000 9410912000 9425110000 957010601200 961006202000 34150ZH7003 34150ZH7003 34150ZH7013 90013883000 NOTE PART NAME QTY. REMARKS CYLINDER ASSY. (ALERT) .................... 1 ..............
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 56 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. NO. 1 ◊ 1◊ 2 % * 3 % * 4 % * 5 6 7 8 10 11 12 13 14 16 17 ◊ 17◊ ◊ 17◊ 18 18 18 18 PART NO. 12200ZF6W01 12200ZF6406 12204ZE2306 12205ZE2305 12216ZE2300 12251ZF6W00 12310ZE3791 12315ZE3840 12391ZE2020 17316611000 90014ZE2000 90042ZE8000 92900080320E 90441ZE2010 9430112200 957251008000 957251008000 957011008000 9807955846 9807955855 9807956846 9807956855 NOTE PART NAME QTY. REMARKS CYLINDER HEAD ..............................
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — FAN COVER ASSY. FAN COVER ASSY. PAGE 58 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — FAN COVER ASSY. FAN COVER ASSY. NO. 4 7 10 13 ◊ 13◊ ◊ 13◊ 15 PART NO. 16731ZE2003 19610ZE3010ZB 19631ZE3W00 36100ZH7003 36100ZF6P81 36100ZF6P82 90013883000 NOTE PART NAME QTY. REMARKS CLIP, TUBE 1 COVER, FAN *NH1* (BLACK) 1 SHROUD 1 SWITCH ASSY., ENGINE STOP 1 SWITCH ASSY., ENGINE STOP ................. 1 .............. S/N 1412956 AND BELOW SWITCH ASSY., ENGINE STOP ................. 1 ..............
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — FLYWHEEL ASSY. FLYWHEEL ASSY. PAGE 60 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — FLYWHEEL ASSY. FLYWHEEL ASSY. NO. 1 3 7 10 ◊ 10◊ ◊ 10◊ 11 PART NO. 19511ZE3000 28450ZE3W11 31100ZE3701 90201ZE3V00 90201ZE3V00 90201ZE3790 90741ZE2000 NOTE PART NAME QTY. REMARKS FAN, COOLING 1 PULLEY, STARTER (SCREEN GRID) 1 FLYWHEEL 1 NUT, SPECIAL (16MM) (1) 1 NUT, SPECIAL (16MM) (1) ........................... 1 .............. S/N 1317976 AND BELOW NUT, SPECIAL (16MM) (1) ........................... 1 ..............
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 62 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — FUEL TANK ASSY. FUEL TANK ASSY. NO. 1 3 6 ◊ 6◊ ◊ 6◊ ◊ 6◊ 8 ◊ 8◊ 9 * 9# 15 17 18 ◊ 18◊ PART NO. 16854ZH8000 16955ZE1000 17510ZE3010ZB 17510ZE3020ZB 17510ZE3800ZA 17510ZE3801ZA 17620ZH7023 17620Z0T305 17631ZH7003 17631Z0T812 91353671004 9405008000 950014523540 950014523540 18◊ ◊ 20 ◊ 20◊ ◊ 20◊ 22 91424Z5L801 9500202080 9500202080 950024080008 957010802500 NOTE PART NAME QTY.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — IGNITION COIL ASSY. IGNITION COIL ASSY. PAGE 64 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — IGNITION COIL ASSY. IGNITION COIL ASSY. NO. 1 ◊ 1◊ ◊ 1◊ 2 8 12 17 18 PART NO. 30500ZF6W02 30500ZF6W02 30500ZF6W03 30700ZE1013 31512ZE2000 36101ZE2701 90015883000 90684ZA0601 NOTE PART NAME QTY. REMARKS COIL ASSY., IGNITION 1 COIL ASSY., IGNITION ..................................... 1.......... S/N 1411816 AND BELOW COIL ASSY., IGNITION ..................................... 1.......... S/N 1411817 AND ABOVE CAP ASSY.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — MUFFLER ASSY. MUFFLER ASSY. PAGE 66 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — MUFFLER ASSY. MUFFLER ASSY. NO. 2 3 5 6 ◊ 6◊ ◊ 6◊ 7 8 9 10 19 22 27 28 31 PART NO. 18310ZE2W61 18320ZE2W61 18330ZE2W00 18331ZE3810 18331ZE3810 18331ZE3811 18333ZF6W01 18355ZE2W00 18381ZE2W10 18381ZE2800 90050ZE1000 90055ZE1000 90006ZE2000 9405008000 90055ZE1000 NOTE PART NAME QTY. REMARKS MUFFLER 1 PROTECTOR, MUFFLER 1 PIPE, EX. 1 CAP, MUFFLER 1 CAP, MUFFLER ...................................................... 1 ......... S/N 1166160 AND BELOW CAP, MUFFLER ......
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — PISTON ASSY. PISTON ASSY. PAGE 68 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — PISTON ASSY. PISTON ASSY. NO. 1 1 1 1 2 2 2 2 3 4 4 5 * 6 PART NO. 13010ZF6005 13011ZF6005 13012ZF6005 13013ZF6005 13101ZF6W00 13102ZF6W00 13103ZF6W00 13104ZF6W00 13111ZF6W00 13200ZE3020 13200ZE3315 90001ZE8000 90601ZE3000 PART NAME QTY. REMARKS RING SET, PISTON (STD) 1 RING SET, PISTON (0.25) 1 RING SET, PISTON (0.50) 1 RING SET, PISTON (0.75) 1 PISTON (STD) 1 PISTON (0.25) 1 PISTON (0.50) 1 PISTON (0.75) 1 PIN, PISTON 1 ROD ASSY., CONNECTING (STD) ...................
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — RECOIL STATER ASSY. RECOIL STARTER ASSY. PAGE 70 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — RECOIL STATER ASSY. RECOIL STARTER ASSY. NO. 1 2 * 3 * 4 * 5 * 6 * 7 * 8 * 10 * 11 * ◊ 11◊ * 13 * 14 PART NO. 28400ZE3W01ZB 28410ZE3W01ZB 28421ZE3W01 28422ZE2W01 28441ZE2W01 28442ZE2W01 28443ZE2W01 28444ZE2W01 28461ZE2W02 28462ZV7003 28462ZE3W01 90004ZE2W01 90008ZE2003 NOTE PART NAME QTY. REMARKS STARTER ASSY., RECOIL *NH1* (BLACK) .............. 1 ......
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — LABELS ASSY. LABELS ASSY. PAGE 72 — STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2/GX390U1QWT2 ENG. — LABELS ASSY. LABELS ASSY. NO. 1 ◊ 1◊ ◊ 1◊ 2 ◊ 2◊ ◊ 2◊ ◊ 3◊ 4 ◊ 5◊ 6 7 PART NO. 87522ZH9010 87516ZH7000 87516ZH7810 87521ZF6W02 87521ZF6W03 87521ZF6W04 87532ZH7000 87534ZE1841 87535ZE1841 87532ZH8810 87528ZE2810 NOTE PART NAME QTY. REMARKS LABEL, CAUTION(ENGLISH ETC.) 1 MARK OPERATOR CAUTION 1 MARK OPERATOR PICTOGRAPH (OPTION) 1 EMBLEM (GX390 HONDA 13.0) 1 EMBLEM (GX390 HONDA 13.0) ............................ 1 ............
TERMS AND CONDITIONS OF SALE — PARTS Terms and Conditions of Sale STOW Construction Equipment PAYMENT TERMS Terms of payment for unit sales are 2% 15 days net 30 days from date of invoice unless otherwise specifically stated on our invoice. Parts invoices have terms of net 10 days. Minimum parts billing is $15.00 net. Applicable discounts will be computed on merchandise value only. Late charges will be assessed at prevailing rates.
NOTES STOW CUTTER 1 SAW — OPERATION & PARTS MANUAL — REV.
OPERATION AND PARTS MANUAL HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING PARTS DEPARTMENT 800-427-1244 FAX: 800-672-7877 310-537-3700 FAX: 310-637-3284 SERVICE DEPARTMENT 800-478-1244 FAX: 310-537-4259 310-537-3700 TECHNICAL ASSISTANCE 800-478-1244 FAX: 310-631-5032 WARRANTY DEPARTMENT 800-421-1244, EXT. 279 FAX: 310-537-1173 310-537-3700, EXT. 279 SALES DEPARTMENT 310-661-4242 FAX: 310-604-9237 877-289-7869 (877-BUY-STOW) © COPYRIGHT 2008, MULTIQUIP INC.
