PARTS AND OPERATION MANUAL PARTS AND OPERATION MANUAL © COPYRIGHT 2001, MULTIQUIP INC. MQ POWER DCA-45SSIU2 TM WHISPERWATT GENERATOR (Standard) PARTS LIST NO. M1870300034A Revision #3 (11/30/01) MULTIQUIP INC. PARTS DEPARTMENT: 18910 WILMINGTON AVE. 800-427-1244 CARSON, CALIFORNIA 90746 FAX: 800-672-7877 310-537-3700 SERVICE DEPARTMENT: 800-421-1244 800-835-2551 FAX:310-537-3927 FAX:310-638-8046 E-mail:mq@multiquip.com • www:multiquip.
PAGE 2 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING PAR TS DEP AR TMENT ARTS DEPAR ARTMENT 800/427-1244 or 310/537-3700 FAX: 800/672-7877 or 310/637-3284 SER VICE DEP AR TMENT SERVICE DEPAR ARTMENT 800/835-2551 or 310/537-3700 FAX: 310/638-8046 WARRANTY DEP AR TMENT DEPAR ARTMENT 800/835-2551 or 310/537-3700 FAX: 310/638-8046 MAIN 800/421-1244 or 310/537-3700 FAX: 310/537-3927 DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD)— REV.
TABLE OF CONTENTS Here's How To Get Help ................................................... 3 Table Of Contents ............................................................ 4 Parts Ordering Procedures .............................................. 5 Rules for Safe Operation .............................................. 6-9 Towing and Transportation ............................................. 10 Trailer Safety Guidelines ........................................... 11-17 Trailer Wiring Diagram ...........
PARTS ORDERING PROCEDURES ■ ■ ■ ■ ■ ■ ■ Dealer account number Dealer name and address Shipping address (if different than billing address) Return fax number Applicable model number Quantity, part number and description of each part Specify preferred method of shipment: • • • • UPS Ground UPS Second Day or Third Day* UPS Next Day* Federal Express Priority One (please provide us with your Federal Express account number)* • • Airborne Express* Truck or parcel post *Normally shipped the same day the order
RULES FOR SAFE OPERATION CAUTION: ■ NEVER touch the hot exhaust manifold, muffler or cylinder. Allow these parts to cool before servicing engine or generator. Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only.
RULES FOR SAFE OPERATION CAUTION: CAUTION: DO NOT touch or open any of the below mentioned components while the generator is running. Always allow sufficient time for the engine and generator to cool before performing maintenance. ■ NEVER touch output terminals during operation. This is extremely dangerous. Always stop the machine when contact with the output terminals is required. CAUTION: ■ Backfeed to a utility system can cause electrocution and.or property damage.
RULES FOR SAFE OPERATION ■ NEVER Run engine without air filter. Severe engine damage may occur. Battery CAUTION: Never over fill the battery with water above the upper limit. The battery contains acids that can cause injury to the eyes and skin. To avoid eye irritation, always wear safety glasses. Use well insulated gloves when picking up the battery. Use the following guidelines when handling the battery: ■ Always service air cleaner frequently to prevent carburetor malfunction.
RULES FOR SAFE OPERATION Transporting ■ Always shutdown engine before transporting. ■ Tighten fuel tank cap securely. ■ Drain fuel when transporting generator over long distances or rough terrain. ■ Always tie-down the generator during transportation by securing the generator. ■ If generator is mounted on a trailer, make sure trailer complies with all local and state safety transportation laws. See page 10 for basic towing procedures.
DCA-45SSIU2 — TOWING RULES FOR SAFE OPERATION Towing Safety Precautions CAUTION : Check with your county or state safety towing regulations department before towing your generator. To reduce the possibility of an accident while transporting the generator on public roads, always make sure the trailer (Figure 1) that supports the generator and the towing vehicle are in good operating condition and both units are mechanically sound.
DCA-45SSIU2 — TRAILER-SAFETY GUIDELINES CAUTION :: 4. Frame Length - This measurement is from the ball hitch to the rear bumper (reflector). ALWAYS make sure the trailer is in good operating condition. Check the tires for 5. Frame Width - This measurement is from fender to fender. proper inflation and wear. Also check the 6. Jack Stand - Trailer support device with maximum wheel lug nuts for proper tightness. pound requirement from the tongue of the trailer. 7.
DCA-45SSIU2 —TRAILER-SPECIFICATIONS Table 1. Specifications MODEL APPLICATION FU E L C E LL BRAKE SYSTEM GVWR FRAME LENGTH FRAME WIDTH JACK STAND TRLR-10W SDW225, SGW250,TLW300 NO NO 1900LB S 96" 50" 800LB . FULL TILT WHEEL TRLR-10 D C A 10, TLG12, DCA15 NO NO 1900LB S 96" 50" 800LB . FULL TILT WHEEL TRLR-10XF DCA10, TLG12, D C A 15, TLW-300 52 GAL NO 1900LB S 96" 50" 800LB . FULL TILT WHEEL TRLR-225W WELDERS, D A 7000S S NO NO 2200LB S 85" 42" 800LB .
DCA-45SSIU2 —TRAILER-SPECIFICATIONS Table 1. Specifications (Con't) MODEL COUPLER TIRES WHEELS AXLE HUBS SUSPENSION ELECTRICAL TRLR-10W 2" B A LL C LA S S 2 ADJUSTABLE 175-13C 13"X4.50" 2200# 2X 2 5 LUG 3 LE A F 4 WIRE LOOM W/ 4 POLE FLAT TRLR-10 2" B A LL C LA S S 2 ADJUSTABLE 175-13C 13"X4.5" 2200#2X 2 5 LUG 3 LE A F 4 POLE FLAT TRLR-10XF 2" B A LL C LA S S 2 ADJUSTABLE 175-13C 13"X4.
DCA-45SSIU2 —TRAILER SAFETY GUIDELINES Brakes If your trailer has a braking system, the brakes should be inspected the first 200 miles of operation. This will allow the brake shoes and drums to seat properly. After the first 200 mile interval, inspect the brakes every 3,000 miles. If driving over rough terrain, inspect the brakes more frequently. Electric Brakes Electrically actuated brakes (Figure 2) are similar to hydraulic brakes.
DCA-45SSIU2 — TRAILER SAFETY GUIDELINES Figure 2. Electrical Brake Components Hydraulic/Air/Surge Brakes Hydraulic brakes (Figure 3) should not require any special attention with the exception of routine maintenance such as shoe and lining replacement. These brakes can be adjusted in the same manner as electric brakes. Brake lines should be periodically checked for cracks, kinks, or blockage.
DCA-45SSIU2 — TRAILER SAFETY GUIDELINES Tires/Wheels/Lug Nuts Tires and wheels are a very impor tant and critical components of the trailer. When specifying or replacing the trailer wheels it is important the wheels, tires, and axle are properly matched. CAUTION: DO NOT attempt to repair or modify a wheel. DO NOT install in inner tube to correct a leak through the rim.
DCA-45SSIU2 —TRAILER SAFETY GUIDELINES Table 3. Suspension Torque Requirements Item Torque (Ft.-Lbs.) 3/8" U-BOLT MIN-30 MAX-35 7/16" U-BOLT MIN-45 MAX-60 1/2" U-BOLT MIN-45 MAX-60 SHACKLE BOLT SPRING EYE BOLT SNUG FIT ONLY. PARTS MUST ROTATE FREELY. LOCKING NUTS OR COTTER PINS ARE PROVIDED TO RETAIN NUT-BOLT ASSEMBLY. MIN-30 MAX-50 SHOULDER TYPE SHACKLE BOLT Lug Nut Torque Requirements It is extremely important to apply and maintain proper wheel mounting torque on the trailer.
DCA-45SSIU2 —TRAILER-WIRING DIAGRAM NOTE: LIGHTS ARE ORIENTED FROM THE DRIVER’S SEAT PAGE 18 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
DCA-45SSIU2 —TRAILER-BRAKE TROUBLESHOOTING Table 5. Electric Brake Troubleshooting Symptom Possible Cause Solution No Brakes or Intermittent Brakes Any open circuits or broken wires? Find and correct. Any short circuits? Find and correct. Faulty controller? Test and correct. Any loose connections? Find and repair. Ground wire secure? Find and secure. Grease or oil on magnets or linings? Clean or replace. Connections corroded? Clean and correct cause of corrosion.
DCA-45SSIU2 —TRAILER-BRAKE TROUBLESHOOTING Table 6. Hydraulic Brake Troubleshooting Symptom Possible Cause Solution No Brakes Brake line broken or kinked? Repair or replace. Weak Brakes or Brakes Pull to One Side Brake lining glazed? Reburnish or replace. Trailer overloaded? Correct weight. Brake drums scored or grooved? Machine or replace. Tire pressure correct? Inflate all tires equally. Tires unmatched on the same axle? Match tires.
DCA-45SSIU2 — GENERATOR DECALS The DCA-45SSIU2 generator is equipped with a number of safety decals. These decals are provided for operator safety and maintenance information. The illustration below and on the preceding page show the decals as they appear on the machine. Should any of these decals become unreadable, replacements can be obtained from your dealer. DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD)— REV.
DCA-45SSIU2 — GENERATOR DECALS PAGE 22 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
DCA-45SSIU2 — SPECIFICATIONS Table 7. Specifications Generator Specifications Model DCA-45SSIU2 Type Revolving field, self ventilated, open protected type synchronous generator Armature Connection Star with Neutral Zig Zag Phase 3 Single Standby Output 47.7 KVA (38.2 KW) 27.6 KW Prime Output 45 KVA (36 KW) 26 KW Voltage 240V or 480V 240/120V Frequency 60 Hz Speed 1800 rpm Power Factor 0.8 1 Aux. AC Power Single Phase, 60 Hz Voltage 120 V Output 4.8 KW (2.
DCA-45SSIU2 — GENERAL INFORMATION DCA-45SSIU2 FAMILIARIZATION Control Box Generator ator The MQ Power Model DCA-45SSIU2 is a 26 kW gener generator that is designed as a high quality portable (requires a trailer for transport) power source for telecom sites, lighting facilities, power tools, submersible pumps and other industrial and construction machinery.
DCA-45SSIU2 — MAJOR COMPONENTS Figure 6. Major Components DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD)— REV.
DCA-45SSIU2 — DIMENSIONS (SIDE AND FRONT) Figure 7a. Dimensions PAGE 26 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
DCA-45SSIU2 — DIMENSIONS (TOP AND REAR) Figure 7b. Dimensions DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD)— REV.
DCA-45SSIU2 — CONTROL PANEL Figure 8. Control Panel PAGE 28 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
DCA-45SSIU2 — CONTROL PANEL The definitions below describe the controls and functions of the DCA-45SSIU2 " Control Panel " (Figure 8). 1. 2. Frequency Meter – Indicates the output frequency in hertz (Hz). Normally 63 Hz ±0.5 Hz. Voltage Regulator Control – Allows manual adjustment of the generator’s output voltage. 3. Voltmeter Change-Over Switch – This switch allows the AC voltmeter to indicate phase to phase voltage between any two phases of the output terminals or to be switched off. 4.
DCA-45SSIU2 — ENGINE OPERATING PANEL Figure 9. Engine Operating Panel PAGE 30 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
DCA-45SSIU2 — ENGINE OPERATING PANEL The definitions below describe the controls and functions of the DCA-45SSIU2 " Engine Operating Panel " (Figure 9). 1. Panel light - Normally used in dark places or at night. When activated, panel will luminate. When the generator is not in use, turn the panel light switch to the ‘OFF’ position. 2. Panel light switch- When activated, will turn on control panel light. 3.
DCA-45SSIU2 — OUTPUT TERMINAL PANEL Output Terminal Panel The output control panel is located on the rear (control panel) end of the generator. The UNV lugs are protected by a face plate cover that can be secured in the close position by a pad lock. 120 Volt Receptacle One GFCI Duplex NEMA 5-20R (120V, 20 Amp) receptacle is located on the output terminal. This receptacle can be used anytime the generator is in operation. The receptacle is controlled by the circuit breaker located on the control panel.
DCA-45SSIU2 — OUTPUT TERMINAL VOLTAGE SELECTION DCA-45SSIU2 Figure 12. Output Panel Location NOTE Legs O and Ground are considered Bonded Grounds. DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD)— REV.
DCA-45SSIU2 — OUTPUT AMPERAGE SETUP Output Terminal Panel Available Voltages A wide range of voltages are available to supply load to many different applications. Voltages may be selected by using the voltage selector switch and depending how you hookup your hard wire connection to the generator. To obtain some of the voltages listed, fine adjustment with the voltage regulator on the control panel is necessary. See Table 8 for available voltages the generator will supply.
DCA-45SSIU2 — OUTPUT AMPERAGE SETUP Receptacle Use When the UVWO terminals are providing power, the receptacle power availability will decrease. Do not exceed receptacle power as listed on Table 10. Table 10. Receptacle Use Pow er in Use Receptacle P o w er Available 240/480V 3-Phase 240/120V Single Phase or Tw ist L o ck C S 6369 Duplex NEMA 5-20R 120V KVA KW KW 45 26 0 40.9 24.8 1.2 36.7 23.6 2.4 32.6 22.4 3.6 28.4 21.2 4.8 Figure 13.
DCA-45SSIU2 — OUTPUT VOLTAGE SETUP 240/120V Hard Wire Hookup 480/240V Hard Wire Hookup With the voltage selector set and locked at ‘single phase 240/120’ and using single phase 120 volts, the generator will provide three legs available with 100 amps each on three different circuits (Figure 18). With the voltage selector set and locked at ‘3 phase 480/ 277’ (Figure 19) and using the 3-phase 240 hookup, it will provide one circuit available at 108 amps with any two wires plus the ground (Figure 20).
DCA-45SSIU2 — OUTPUT VOLTAGE SETUP Voltage Selector Switch- 3 Phase 480/277V Position The following are additional voltages available when the voltage selector switch is in the ‘3 phase 480/277V’ position. Single Phase: 480V, 440V, or 416 Volt This setting can provide single phase power at 480, 440, or 416 volts.
DCA-45SSIU2 — OUTPUT VOLTAGE SETUP Voltage Selector Switch- 3 Phase 240/139V Position The following are additional voltages available when the voltage selector switch is in the ‘3 phase 240/139V’ position. Figure 25. Voltage Selector Switch 240/139V Three Phase Position 3 Phase, 240V, 220V, or 208 Volt This setting can provide 3-phase power at 240, 220, or 208 volts.
DCA-45SSIU2 — OUTPUT VOLTAGE SETUP Voltage Selector Switch- Single Phase 240/120V Position The following are additional voltages available when the voltage selector switch is in the ‘single phase 240/120V’ position. Single Phase: 120 Volt This setting can provide single phase power at 120 volts. After hooking up the hard wires to the lugs as shown in Figure 31, 120 volts can be obtained with the voltage regulator knob turned to fine tune. Figure 31. Hard Wire Hookup for Single Phase, 120 volt Figure 29.
DCA-45SSIU2 — INSTALLATION Outdoor Installation Install the generator in a location where it will not be exposed to rain or sunshine. Make sure the generator is on secure level ground so that it cannot slide or shift around. Also install the generator in a manner so that the exhaust will not be discharged in the direction of nearby homes. CAUTION : The installation site must be relatively free from moisture and dust. All electrical equipment should be protected from excessive moisture.
DCA-45SSIU2 — INSTALLATION Figure 31. Typical Generator Grounding Application DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD)— REV.
DCA-45SSIU2 — PRE-SETUP General Inspection Prior to Operation The DCA-45SSIU2 generator has been thoroughly inspected and accepted prior to shipment from the factory. However, be sure to check for damaged parts or components, or loose nuts and bolts, which could have occurred in transit. Extension Cable Circuit Breakers To protect the generator from an overload, a 3-pole, 110 amp, main circuit breaker is provided to protect the UVW output terminals from overload.
DCA-45SSIU2 — PRE-SETUP Lubrication Oil Fuel Fill the engine crankcase with lubricating oil through the filler but do not overfill. Make sure the generator is level. With the dipstick inserted all the way verify that the oil level is maintained between the two notches (Figure 32) on the dipstick. See Table 12 for proper selection of engine oil. Use CC grade or higher type of oil. Fill the fuel tank with clean and fresh diesel fuel. DO NOT fill the tank beyond capacity.
DCA-45SSIU2 — PRE-SETUP CAUTION : When adding coolant or antifreeze to the radiator, do not remove the radiator cap until the unit has completely cooled. Day-to-day addition of coolant is done from the reserve tank. When adding coolant to the radiator, DO NOT remove the radiator cap until the unit has completely cooled. See Table 13. for engine, radiator, and reserve tank coolant capacities. Make sure the coolant level in the reserve tank is always between the "H" and the "L" markings. Table 13.
DCA-45SSIU2 — PRE-SETUP Battery This unit is of negative ground. DO NOT connect in reverse. Always maintain battery fluid level between the specified marks. Battery life will be shortened, if the fluid level is not properly maintained. Add only distilled water when replenishment is necessary. DO NOT over fill. The battery is sufficiently charged if the specific gravity of the battery fluid is 1.28 (at 68° F). If the specific gravity should fall to 1.
DCA-45SSIU2 — LOAD APPLICATION Single Phase Load CAUTION: Motors and motor-driven equipment draw Always be sure to check the nameplate on the generator much greater current for starting than and equipment to insure the wattage, amperage and during operation. frequency requirements are satisfactorily supplied by the generator for operating the equipment. Generally, the wattage listed on the nameplate of the An inadequate size connecting cable which cannot carry equipment is its rated output.
DCA-45SSIU2 — GENERATOR START-UP PROCEDURE WARNING: The engine's exhaust contains harmful W AYS ventilate the emissions. A LLW exhaust when operating inside tunnels, excavations or buildings. Direct exhaust away from nearby personnel. 2. Connect the load to the UVW terminals as shown in Figure 36. These terminals can be found on the output terminal panel, (see page 33 Figure 12). To gain access to the output terminals lift the terminal cover.
DCA-45SSIU2 — GENERATOR START-UP PROCEDURE 4. Close all engine enclosure doors (Figure 38). 8. Once the engine is warm and the engine is running properly, pull and turn the engine throttle control lever to ‘High’ (Figure 42). Figure 42. Engine Speed Switch (high) Figure 38. Engine Enclosure Doors 5. Check the voltage selection switch (Figure 39) is at the desired voltage. Figure 39. Voltage Selection Switch 6. 9.
DCA-45SSIU2 — GENERATOR START-UP PROCEDURE 11. The ammeter (Figure 46) will indicate zero amps with no 14. The tachometer (Figure 49) will indicate the speed of load applied. When a load is applied, this meter will the engine when the generator is operating. Under normal indicate the amount of current that the load is drawing operating conditions this speed is approximately 1800 from the generator’s alternator. RPM’s. 20 40 0 60 75 A Figure 46. Ammeter (No Load) 12.
DCA-45SSIU2 — GENERATOR SHUTDOWN PROCEDURE ENGINE SHUTDOWN To shutdown the generator, use the following procedure: 1. Switch both the MAIN, GFCI and LOAD circuit breakers (Figure 52) to the “OFF” position. EMERGENCY STOP 1. To stop the engine in the event of an emergency, switch the MAIN, GFCI and LOAD circuit breakers to ‘OFF’ position. 2. Turn the starter switch key to ‘Stop’ position. Figure 52. Main, GFCI and Load circuit breakers 2.
NOTE PAGE DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD)— REV.
DCA-45SSIU2 — MAINTENANCE General Inspection Cleaning the Fuel Strainer Prior to each use, the generator should be cleaned and inspected for deficiencies. Check for loose, missing or damaged nuts, bolts or other fasteners. Also check for fuel, oil, and coolant leaks. Engine Side (Refer to the Engine Instruction Manual) Clean the fuel strainer if it contains dust or water. Remove dust or water in the strainer cap and wash it in gasoline. Securely fasten the fuel strainer cap so that fuel will not leak.
DCA-45SSIU2 — MAINTENANCE Flushing Out Radiator and Replacing Coolant Open both cocks located at the crankcase side and at the lower part of the radiator and drain coolant. Open the radiator cap while draining. Remove the overflow tank and drain. Check hoses for softening and kinks. Check clamps for signs of leakage. Flush the radiator by running clean tap water through radiator until signs of rust and dirt are removed. DO NOT clean radiator core with any objects, such as a screwdriver.
DCA-45SSIU2 — MAINTENANCE Valve Clearance Check 3. Remove the timing check hole cover at the front of injection pump to check the alignment between the 1. In order to bring No. 1 or No. 4 cylinder to top dead center pointer “a” on the injection pump gear lock plate and the in the compression stroke, align the notched line on the projected area mark “b” on the timing gear case. crank pulley with TDC mark on the timing gear case cover. 4. If “a” and “b” are in alignment, the timing is set correctly.
DCA-45SSIU2 — MAINTENANCE INSPECTION / MAINTENANCE 10 Hrs DAILY Check Engine Fluid Levels X Check Air Cleaner X Check Battery Acid Level X Check Fan Belt Condition X Check for Leaks X Check for Loosening of Parts X 250 Hrs Replace Engine Oil and Filter *1 X Clean Air Filter X Drain Bottom of Fuel Tank X Clean Unit, Inside and Outside X 500 Hrs 1000 Hrs ENGINE Change Fuel Filter *2 X Clean Radiator and Check Coolant Protection Level X Test Fuel Injection Nozzle X Replace Air F
DCA-45SSIU2 — ENGINE WIRING DIAGRAM PAGE 56 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
DCA-45SSIU2 — ENGINE WIRING DIAGRAM DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD)— REV.
DCA-45SSIU2 — GENERATOR WIRING DIAGRAM PAGE 58 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
NOTE PAGE DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD)— REV.
DCA-45SSIU2 — TROUBLESHOOTING (ENGINE) Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, use the tables shown for diagnosis based on the Engine Troubleshooting (Table 1 7). If the problem cannot be remedied, consult our company's business office or service plant. TABLE 17. ENGINE TROUBLESHOOTING SYMPTOM POSSIBLE PROBLEM SOLUTION No fuel? Replenish fuel. Air in the fuel system? Bleed system.
DCA-45SSIU2 — TROUBLESHOOTING (ENGINE) TABLE 17. ENGINE TROUBLESHOOTING (CONTINUED) SYMPTOM Engine revolution is not smooth. Either white or blue exhaust gas is observed. Either black or dark gray exhaust gas is observed. Deficient output. POSSIBLE PROBLEM SOLUTION Fuel filter clogged or dirty? Clean or change. Air cleaner clogged? Clean or change. Fuel leak due to loose injection pipe retaining nut? Tighten nut. Injection pump malfunctioning? Repair or replace.
DCA-45SSIU2 — TROUBLESHOOTING (GENERATOR/ENGINE) Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, use the tables shown for diagnosis based on the Engine and Radiator Troubleshooting (Table18) . If the problem cannot be remedied, consult our company's business office or service plant. TABLE 17.
NOTE PAGE DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD)— REV.
EXPLANATION OF CODE IN REMARKS COLUMN How to read the marks and remarks used in this parts book. Items Found In the “Remarks” Column Serial Numbers-Where indicated, this indicates a serial number range (inclusive) where a particular part is used. Model Number-Where indicated, this shows that the corresponding part is utilized only with this specific model number or model number variant.
DCA-45SSIU2 — SUGGESTED SPARE PARTS DCA-45SSIU2 W/ISUZU 4BG1 DIESEL ENGINE 1 TO 3 UNITS Qty. P/N Description 1 ......... 0601808811 .............. CIRCUIT BREAKER 1 ......... 0601820671 .............. AUTOMATIC VOLTAGE REGULATOR 1 ......... 0601840073 .............. RHEOSTAT VOLTAGE REGULATOR 1 ......... 0601840121 .............. KNOB RHEOSTAT 1 ......... M1310500403 ........... RADIATOR HOSE 1 ......... M1310500303 ........... RADIATOR HOSE 1 ......... 8941324900 .............. RADIATOR HOSE 5 .........
DCA-45SSIU2 --- GENERATOR ASSY. GENERATOR ASSY. PAGE 66 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
DCA-45SSIU2 --- GENERATOR ASSY. GENERATOR ASSY. NO. PART NO.
DCA-45SSIU2 --- CONTROL BOX ASSY. CONTROL BOX ASSY. PAGE 68 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
DCA-45SSIU2 --- CONTROL BOX ASSY. CONTROL BOX ASSY. NO. PART NO.
DCA-45SSIU2 --- CONTROL BOX ASSY. CONTROL BOX ASSY. PAGE 70 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
DCA-45SSIU2 --- CONTROL BOX ASSY. CONTROL BOX ASSY. NO. PART NO. 26 27 28 29 30 31 32 33 34 35 36 37 37-1 38 39 40 41 42 43 0601808950 0601808986 0601801040 0601806813 0601806859 0601801041 0601840073 0601840121 M1223100004 0027105015 0027105010 0027105015 0027105010 M9220100004 0080200007 1825500732 0601802132 011106015 0601821370 0021004040 0040004000 031104080 0330000530 1825530400 011106015 ITEM QTY. REMARKS AC AMMETER .......................................... 1 ..........
DCA-45SSIU2 ENGINE AND RADIATOR ASSY. ENGINE AND RADIATOR ASSY. PAGE 72 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
DCA-45SSIU2 ENGINE AND RADIATOR ASSY. ENGINE AND RADIATOR ASSY. NO. PART NO. ITEM QTY. REMARKS 1 M19232000034 ENGINE .......................................... 1 .......... ISUZU B-4BG1 8970208220 FAN BELT ....................................... 1 .......... REPLACES 5136711320 AND 0602011403 1-1 8943212191 CARTRIDGE, OIL FILTER .............. 1 .......... REPLACES 0602041211 1-2 X132400240 CARTRIDGE, FUEL FILTER ........... 1 ..........
DCA-45SSIU2 --- ENGINE OPERATING PANEL ASSY. ENGINE OPERATING PANEL ASSY. PAGE 74 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
DCA-45SSIU2 --- ENGINE OPERATING PANEL ASSY. ENGINE OPERATING PANEL ASSY. NO. PART NO. ITEM QTY. REMARKS M1357200302 WIRE HARNESS. ENGINE 1 1 M1354300304 SLIDE LEVER 1 2 0601840190 KNOB .............................................. 1 ........... REPLACES M9320000004 3 020108060 HEX. NUT ....................................... 1 ........... REPLACES 0036003000 4 M1354200004 BRACKET 1 5 020108060 HEX. NUT ....................................... 1 ...........
DCA-45SSIU2 --- OUTPUT TERMINAL ASSY. OUTPUT TERMINAL ASSY. PAGE 76 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
DCA-45SSIU2 --- OUTPUT TERMINAL ASSY. OUTPUT TERMINAL ASSY. NO. PART NO. ITEM QTY REMARKS 1 8111860303 TERMINAL PANEL .................................................. 1 ...... REPLACES M1230700103 2 0801831704A OUTPUT TERMINAL BOLT .................................... 5 ...... REPLACES M9220100204 3 012210020 TIE BOLT ................................................................ 5 ...... REPLACES M9220100104 4 0039310000 HEX.
DCA-45SSIU2 --- BATTERY ASSY. BATTERY ASSY. PAGE 78 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
DCA-45SSIU2 --- BATTERY ASSY. BATTERY ASSY. NO. PART NO. 1 551010280 2 M9310500014 3 M9103000304 4 0602220920 5 0040006000 6 M1346400204 7 M1346400404 8 0016910020 0040510000 ITEM QTY. REMARKS BATTERY ........................................ 1 .......... REPLACES 0602220187;627MFD BATTERY SHEET 1 BATTERY BAND 1 BATTERY BOLT SET 2 LOCK WASHER 2 BATTERY CABLE 1 BATTERY CABLE 1 HEX. HEAD BOLT 1 TOOTHED WASHER 1 DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD)— REV.
DCA-45SSIU2 --- MUFFLER ASSY. MUFFLER ASSY. PAGE 80 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
DCA-45SSIU2 --- MUFFLER ASSY. MUFFLER ASSY. NO. PART NO. 1 0602300165 2 0016910025 3 M1333001303 4 1141450690 5 M1333200114 6 9098400850 0040010000 7 0016908035 8 M1330400304 9 M1333300004 10 0016906015 11 0602326090 ITEM QTY. REMARKS MUFFLER ....................................... 1 .......... 27242N HEX. HEAD BOLT 4 EXHAUST PIPE 1 GASKET ......................................... 1 .......... REPLACES 0602320004 GASKET 1 HEX. NUT ....................................... 3 ..........
DCA-45SSIU2 --- FUEL TANK ASSY. FUEL TANK ASSY. PAGE 82 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
DCA-45SSIU2 --- FUEL TANK ASSY. FUEL TANK ASSY. NO. PART NO. 1 M1363000302 2 0605505070 3 M1363200104 4 M9310500104 5 011008020 6 0207308000 7 0222100600 8 M9200000003 9 M9200200004 10 0150000018 11 011206020 12 M1363400104 13 0605515198 14 0602042420 15 0602220911 16 0191301200 17 0191300300 18 0191302000 19 0605515109 ITEM QTY. REMARKS FUEL TANK 1 CAP, FUEL TANK 1 TANK BAND 2 SUPPORTER SHEET 4 HEX. HEAD BOLT ........................... 2 ........... REPLACES 0016908020 HEX.
DCA-45SSIU2 --- ENCLOSURE ASSY. ENCLOSURE ASSY. ADD THE FOLLOWING DIGITS AFTER THE PART NUMBER WHEN ORDERING ANY PAINTED PANEL TO INDICATE COLOR OF UNIT: 5 -BLACK 1-ORANGE 6 -CATERPILLAR YELLOW 2-WHITE 3 -SPECTRUM GRAY 7 -CATO GOLD 4 -SUNBELT GREEN 8 -RED THE SERIAL NUMBER MAY BE REQUIRED. PAGE 84 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
DCA-45SSIU2 --- ENCLOSURE ASSY. ENCLOSURE ASSY. NO. PART NO.
DCA-45SSIU2 --- ENCLOSURE ASSY. ENCLOSURE ASSY. PAGE 86 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
DCA-45SSIU2 --- ENCLOSURE ASSY. ENCLOSURE ASSY. NO. PART NO.
DCA-45SSIU2 --- RUBBER SEAL ASSY. RUBBER SEAL ASSY. PAGE 88 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
DCA-45SSIU2 --- RUBBER SEAL ASSY. RUBBER SEAL ASSY. NO. PART NO.
DCA-45SSIU2 --- DECALS DECAL ASSY. PAGE 90 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
DCA-45SSIU2 --- DECALS DECAL ASSY. NO. PART NO.
ISUZU 4BG1 — CYLINDER HEAD COVER ASSY. CYLINDER HEAD COVER ASSY. PAGE 92 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — CYLINDER HEAD COVER ASSY. CYLINDER HEAD COVER ASSY. NO PART NO PART NAME QTY. REMARKS 1 8971334460 COVER ............................................ 1 4 8941332075 CAP ................................................ 1 5 8941236231 GASKET, OIL FILLER ..................... 1 27 9111790300 GASKET, HEAD COVER ................ 3 68 9111791050 WASHER ......................................... 3 69 8943109120 GASKET, HEAD TO COVER ........... 1 .......... REPLACES 8944625590 75 9111750120 NUT .......
ISUZU 4BG1 — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 94 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. NO PART NO 1 8971418211 2 8944189200 3 8943674380 8943674370 4* 5117510010 5A* 8970376860 5B* 5117110280 6* 9096600340 7A* 1096000051 7B* 5112190150 7C* 1096000160 7D* 9111291280 7E* 1096000160 7F* 5096000130 8 9111296010 9 9041108250 10 9825139289 11 5197320021 12 9117778050 13 0500410200 14 9041108750 9098301770 53 1093000180 54 5093000650 168 5117770640 PART NAME QTY. REMARKS CYLINDER HEAD ASSY. 1 INCL. ITEMS W/* GASKET, HEAD 1 BOLT ..................
ISUZU 4BG1 — CYLINDER BLOCK ASSY. CYLINDER BLOCK ASSY. PAGE 96 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — CYLINDER BLOCK ASSY. CYLINDER BLOCK ASSY. NO. PART NO.
ISUZU 4BG1 — OIL PAN AND LEVEL GAUGE ASSY. OIL PAN AND LEVEL GAUGE ASSY. PAGE 98 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — OIL PAN AND LEVEL GAUGE ASSY. OIL PAN AND LEVEL GAUGE ASSY. NO. 1 2 3* 4* 16 23 119A* 119B* 120A* 120B* 277 PART NO. 8941340361 5117601500 1096230570 9096620120 8943706660 0500408180 9992023160 9992023240 9095714160 9095714240 1117500120 PART NAME OIL PAN ASSEMBLY OIL LEVEL GAUGE DRAIN PLUG GASKET OIL DRAIN PLUG OIL PAN GASKET BOLT OIL HEATER BLIND PLUG OIL HEATER BLIND PLUG GASKET GASKET OIL FILLER CAP QTY. REMARKS 1 .......... INCL.
ISUZU 4BG1 — CAMSHAFT AND VALVE ASSY. CAMSHAFT AND VALVE ASSY. PAGE 100 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — CAMSHAFT AND VALVE ASSY. CAMSHAFT AND VALVE ASSY. NO. 1 4 5 7 9 10 11 12 45 53 55 58 59 65 69 71A 71B 72 76 78 81 83 84 85 86 88 89 93 95 101 107 111 112 196 PART NO.
ISUZU 4BG1 — CRANKSHAFT, PISTON AND FLYWHEEL ASSY. CRANKSHAFT, PISTON AND FLYWHEEL ASSY. PAGE 102 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — CRANKSHAFT, PISTON AND FLYWHEEL ASSY. CRANKSHAFT, PISTON AND FLYWHEEL ASSY. NO 1 7 12 28 32 33 35 37 38 40 42 44 48 56 59 63 68 73 83 84 85* 86* 126 PART NO 8943398950 8970716610 8970461810 8971379100 9081612200 5123190032 9123336070 9000901570 5123360030 5123340060 8970713580 5123780020 8941075970 8941004540 5095030240 8971766500 8971766510 8971238330 9122716080 912211604 1122301041 1122510270 1122350271 8941075751 PART NAME QTY. REMARKS CRANKSHAFT 1 CRANKSHAFT, STD KIT ............ 1 ......
ISUZU 4BG1 — TIMING GEAR AND FLYWHEEL HOUSING ASSY. TIMING GEAR AND FLYWHEEL HOUSING ASSY. PAGE 104 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — TIMING GEAR AND FLYWHEEL HOUSING ASSY. TIMING GEAR AND FLYWHEEL HOUSING ASSY. NO. 1 2 36 39 42 49 54 57 58 60 65 86 93 103 175 211 242 252 290 382 PART NO. 8944509752 8943213304 0500408200 0500408450 8943706710 9112290581 8943706720 8971298300 5113210090 0500406140 0500408250 0500408800 5090000841 5090300381 8970276011 8944533001 1096234650 1096254380 1096253630 0500408250 9095714160 0500408200 8943218380 9992023160 PART NAME QTY. REMARKS TIMING GEAR CASE 1 FLYWHEEL HOUSING 1 BOLT ..........
ISUZU 4BG1 — ENGINE MOUNTING ASSY. ENGINE MOUNTING ASSY PAGE 106 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — ENGINE MOUNTING ASSY. ENGINE MOUNTING ASSY. NO. 2C D 20 125 251 PART NO. 9117712470 9117712480 8943134650 9091105100 9091505100 PART NAME ENGINE FOOT, RIGHT ENGINE FOOT, LEFT BOLT NUT LOCK WASHER QTY. 1 1 7 1 1 REMARKS DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD)— REV.
ISUZU 4BG1 — INLET MANIFOLD ASSY. INLET MANIFOLD ASSY. PAGE 108 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — INLET MANIFOLD ASSY. INLET MANIFOLD ASSY. NO. 1 7 20 52 59 60 138 144 PART NO. 8971333280 8970241220 0911501080 8943216751 0500510300 0501510300 8943706760 8970225710 5141111970 0500408250 PART NAME QTY. REMARKS INLET MANIFOLD 1 GASKET 1 NUT 2 INLET PIPE 1 BOLT .............................................. 2 ........... M10X30 W/ LOCK WASHER BOLT .............................................. 2 ...........
ISUZU 4BG1 — EXHAUST MANIFOLD ASSY. EXHAUST MANIFOLD ASSY. PAGE 110 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — EXHAUST MANIFOLD ASSY. EXHAUST MANIFOLD ASSY. NO. 1 2 15 16 88 PART NO. 5141410360 8944046100 8943185540 8943185550 9044110300 8941704860 PART NAME QTY. REMARKS EXHAUST MANIFOLD 1 GASKET 2 BOLT ................................................... 1 ............. M8X63 W/PLAIN WASHER BOLT ................................................... 3 ............. M8X75 W/ PLAIN WASHER EXHAUST PIPE STUD 3 NUT 4 DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD)— REV.
ISUZU 4BG1 — VENTILATION ASSY. VENTILATION ASSY. PAGE 112 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — VENTILATION ASSY. VENTILATION ASSY. NO. 141 142 143 PART NO. 894110110 1143620020 9934905100 PART NAME DIAPHRAGM ASSY. PCV COVER SCREW QTY. 1 1 6 REMARKS DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD)— REV.
ISUZU 4BG1 — WATER PUMP AND CORROSION RESISTOR ASSY. WATER PUMP AND CORROSION RESISTOR ASSY. PAGE 114 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — WATER PUMP AND CORROSION RESISTOR ASSY. WATER PUMP AND CORROSION RESISTOR ASSY. NO. 2 3# 4* 7 9*# 18*# 19*# 20*# 25*# 26*# 27*# 28*# 29*# 30*# 32*# 34*# 36 57 66*# 67*# PART NO. 8971250510 8943706610 8943809470 8944161302 9091801470 5136210110 5136130070 5136120100 5136420530 5136390020 5098000520 5095030990 8943777860 9099521030 5136200061 9090908200 0500410400 5090300101 0500410500 5096050050 5096250780 5136390070 PART NAME QTY. REMARKS WATER PUMP ASSY. .......... 1 .....................
ISUZU 4BG1 — THERMOSTAT AND HOUSING ASSY. THERMOSTAT AND HOUSING ASSY. PAGE 116 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — THERMOSTAT AND HOUSING ASSY. THERMOSTAT AND HOUSING ASSY. NO. 1 2 14 27 28 44 49 50 58 64 66 PART NO. 5137700301 8944033142 9096610050 9095713160 5096050050 0501410250 0501410300 8944017531 0500408250 5096050050 8941760310 8943706730 PART NAME QTY. REMARKS THERMOSTAT 1 HOUSING 1 SWITCH 1 GASKET.................................... 1 ................ REPLACES 9095714160 HEATER PLUG 1 BOLT ......................................... 4 ................ M10X25 W/LOCK AND PLAIN WASHER BOLT ..........
ISUZU 4BG1 — ENGINE WATER PIPING ASSY. ENGINE WATER PIPING ASSY. PAGE 118 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — ENGINE WATER PIPING ASSY. ENGINE WATER PIPING ASSY. NO. 2 148 PART NO. 8941324900 9099153151 PART NAME HOSE CLIP QTY. 1 2 REMARKS DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD)— REV.
ISUZU 4BG1 — FAN AND FAN BELT ASSY. FAN AND FAN BELT ASSY. PAGE 120 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — FAN AND FAN BELT ASSY. FAN AND FAN BELT ASSY. NO. 1 16 24 36 38 77 80 86A 86B PART NO. 8970699020 9098516490 8942059861 5136711320 1136420250 9091647080 5136740320 0500408220 0501410300 PART NAME QTY. REMARKS COOLING FAN 1 WASHER 4 BOLT ...................................... 4 ................... M8X65 BELT 1 SPACER 1 WASHER 1 ADJUSTING PLATE 1 BOLT 1 BOLT 1 DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD)— REV.
ISUZU 4BG1 — FUEL INJECTION ASSY. FUEL INJECTION ASSY. PAGE 122 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — FUEL INJECTION ASSY. FUEL INJECTION ASSY. NO. 1 15* 16 17 18 19 31 32# 33# 34%# 35%# 36%# 37%# 38%# 39%# 41%# 42%# 45%# 46%# 54 62 63 65 66 75 80 82 84 87 93 113 133 PART NO.
ISUZU 4BG1 — FUEL FILTER AND BRACKET ASSY. FUEL FILTER AND BRACKET ASSY. PAGE 124 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — FUEL FILTER AND BRACKET ASSY. FUEL FILTER AND BRACKET ASSY. NO. 1 PART NO. 1132007011 20 21* 29* 30* 40 45 47 54 58* 69 88 5154112231 1132120870 1132600470 1096300850 5197550010 0501410350 0501408250 1094680021 1132400791 9099063251 0500410200 PART NAME QTY. REMARKS FUEL FILTER ASSY. ................. 1 ................ REPLACES 8944537371 AND 8941517451 INCL. ITEMS W/* EYE JOINT 1 COVER ...................................... 1 ................ REPLACES 5132120751 OVERFLOW VALVE ...........
ISUZU 4BG1 — FUEL PUMP AND PIPE ASSY. FUEL PUMP AND PIPE ASSY. PAGE 126 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — FUEL PUMP AND PIPE ASSY. FUEL PUMP AND PIPE ASSY. NO. 107 119 150 158A 158B 159 PART NO. 5154114570 9154127311 9095720140 5154190040 5154190051 0501406160 PART NAME QTY. REMARKS PIPE .......................................... 1 ................ REPLACES 8970209330 PIPE .......................................... 1 ................ REPLACES 8970209340 GASKET 2 CLIP 1 CLIP 1 BOLT 1 DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD)— REV.
ISUZU 4BG1 — OIL COOLER AND OIL FILTER ASSY. OIL COOLER AND OIL FILTER ASSY. PAGE 128 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — OIL COOLER AND OIL FILTER ASSY. OIL COOLER AND OIL FILTER ASSY. NO. 2* 109 288* 290* 321 329 331 356 375* 392 469 496 526 PART NO. 1878102201 0500408250 0500408450 0500408200 8942058961 9098621170 5096230670 8943706700 5090000071 9091605100 5132190261 9099205260 9091505100 8970196530 5132002262 5112800111 PART NAME QTY. REMARKS ELEMENT 1 BOLT ....................................... 11 ........... M8X25 W/LOCK WASHER BOLT ......................................... 8 ...........
ISUZU 4BG1 — OIL PUMP AND OIL STRAINER ASSY. OIL PUMP AND OIL STRAINER ASSY. PAGE 130 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — OIL PUMP AND OIL STRAINER ASSY. OIL PUMP AND OIL STRAINER ASSY. NO. 1 2* 3* 5* 8* 19* 29 32*# 34*# 35* 38A* 38B* 40*# 41* 42* 43* 67* 86* PART NO. 5131001373 5131650040 9081040300 5095800980 5131250020 5878102022 0500410250 1131280180 5131210140 5131130351 5131410171 5131410180 1131230160 5098430030 5131190060 0108058000 9091505080 1131190010 PART NAME QTY. REMARKS OIL PUMP ASSY. ...................... 1 ................ INCL. ITEMS W/* SPRING SEAT 1 PIN 1 COIL SPRING 1 GEAR 1 GEAR SET ......
ISUZU 4BG1 — OIL AND VACUUM PIPING ASSY. OIL AND VACUUM PIPING ASSY. PAGE 132 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — OIL AND VACUUM PIPING ASSY. OIL AND VACUUM PIPING ASSY. NO. 1 26 28 37 40 47 116 142 279 343 434 448 PART NO. 8971242340 8941753012 9099211880 5133112561 0501408450 0500408350 0500408320 1096234620 9095720100 9098440220 8941625680 1093600430 0911501080 8941405812 PART NAME QTY. REMARKS PIPE 1 PIPE 1 GASKET 2 PIPE 1 BOLT ...................................... 4 ................... M8X45 W/LOCK AND PLAIN WASHER BOLT ...................................... 2 ...................
ISUZU 4BG1 — ELECTRICAL CONTROL ASSY. ELECTRICAL CONTROL ASSY. PAGE 134 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — ELECTRICAL CONTROL ASSY. ELECTRICAL CONTROL ASSY. NO. 1 2 4 16 19 26 38 89 252 286 288 PART NO. 1811001911 8971433290 0500512280 0287812350 0501408350 5197110620 050041000 0500410450 5090300101 9825300460 8970299880 8943717120 0911502080 9091606080 PART NAME QTY. REMARKS STARTER ASSY. ....................... 1 ................ 24V 4.5KW GENERATOR ASSY. ................. 1 ................ 24V 30A BOLT ......................................... 1 ................ M12X28 BOLT ...................
ISUZU 4BG1 — BATTERY RELAY ASSY. BATTERY RELAY ASSY. PAGE 136 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — BATTERY RELAY ASSY. BATTERY RELAY ASSY. NO. 68 PART NO. 1823200010 PART NAME QTY. BATTERY RELAY ...................... 1 REMARKS DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD)— REV.
ISUZU 4BG1 — STARTER COMP. ASSY. STARTER COMP. ASSY. PAGE 138 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — STARTER COMP. ASSY. STARTER COMP. ASSY. NO. 1 2 3# 4 5 6 8 9% 10 11A 11B 11C 12 15 16 17A$ 17B$ 18$ 19 20@ 21@ 22@ 23@ 27A 27B 28 29 30 31 50@ 54 57 59 61 62 63 64 65 77 78 80 86 PART NO.
ISUZU 4BG1 — INJ. PUMP COMP. ASSY. INJ. PUMP COMP. ASSY. PAGE 140 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — INJ. PUMP COMP. ASSY. INJ. PUMP COMP. ASSY. NO. PART NO.
ISUZU 4BG1 — INJ. PUMP COMP. ASSY. INJ. PUMP COMP. ASSY. PAGE 142 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — INJ. PUMP COMP. ASSY. NJ. PUMP COMP. ASSY. NO. PART NO.
ISUZU 4BG1 — GOVERNOR COMP. ASSY. GOVERNOR COMP. ASSY. PAGE 144 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — GOVERNOR COMP. ASSY. GOVERNOR COMP. ASSY. NO. 1 2* 3* 4* 7* 8A* 8B* 11* 12* 13* 15* 16* 17* 18* 23* 24* 25* 28* 34* 37* 40* 41* 43* 45A* 45B* 59* 60B* 60C* 63* 71* 79* 83* 86* 87* 90* 91* PART NO.
ISUZU 4BG1 — GOVERNOR COMP. ASSY. GOVERNOR COMP. ASSY. PAGE 146 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — GOVERNOR COMP. ASSY. GOVERNOR COMP. ASSY. NO. PART NO. PART NAME QTY.
ISUZU 4BG1 —FEED PUMP ASSY. FEED PUMP ASSY. PAGE 148 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — FEED PUMP ASSY. FEED PUMP ASSY. NO. 1 2* 3* 4* 5* 8* 9* 10* 11* 13* 15* 16* 17* 18* 19* 28* 29*# 30*# 31*# PART NO. 8971219100 1157610060 1196230160 9813517020 1157550020 1156190820 1157590010 1157590030 5157590270 9813550250 5157510120 9813512050 9813513020 9813550350 8941711850 5157540010 9813514030 9813514100 1157590020 PART NAME QTY. REMARKS PUMP ASSY. .................................. 1 ................. INCL.
ISUZU 4BG1 — MISC. INJECTION PUMP ASSY. MISC. INJECTION PUMP ASSY. PAGE 150 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — MISC. INJECTION PUMP ASSY. MISC. INJECTION PUMP ASSY. NO. 2 3 8 9 10 19A 19B 20 2 PART NO. 5197510500 9041010300 9091645100 9091506100 5156390020 5090000841 5090002221 9095720080 8943706750 PART NAME QTY. REMARKS BRACKET 1 STUD 4 WASHER 4 WASHER 4 NUT 4 BOLT ......................................... 6 ........... M8X55 W/LOCK WASHER BOLT ......................................... 1 ........... M8X22 GASKET 1 GASKET 1 DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD)— REV.
ISUZU 4BG1 — COUPLING ASSY, COUPLING ASSY. PAGE 152 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — COUPLING ASSY. COUPLING ASSY. NO. 1 4 9 10 11 27 30 PART NO. 5157810030 1156192470 9096620070 9884105020 5156190480 5125240210 8944575170 PART NAME COUPLING PLATE BOLT NUT WASHER GEAR BOLT QTY. 1 1 1 1 1 1 6 REMARKS DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD)— REV.
ISUZU 4BG1 — ACCELERATOR PEDAL ASSY. ACCELERATOR PEDAL ASSY. PAGE 154 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — ACCELERATOR PEDAL ASSY. ACCELERATOR PEDAL ASSY. NO. 204 PART NO. 5197890040 PART NAME BRACKET QTY. 1 REMARKS DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD)— REV.
ISUZU 4BG1 — AIR DUCT ASSY. AIR DUCT ASSY. PAGE 156 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — AIR DUCT ASSY. AIR DUCT ASSY. NO. 343 345 PART NO. 8943216680 8942420340 PART NAME HOSE CLIP QTY. 1 2 REMARKS DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD)— REV.
ISUZU 4BG1 — WATER SEDIMENTER ASSY. WATER SEDIMENTER ASSY. PAGE 158 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — WATER SEDIMENTER ASSY. WATER SEDIMENTER ASSY. NO. 1 3* 4* 5* 7* 9* 34* 35*# 36* 38* 46* 47 50B 51B 50C 50C 51 62A 62B PART NO. 1132008410 1132112110 5132120591 5096230700 5132190200 5096300240 8944537460 8944163770 5132190221 5132190210 9095720140 894470470 1097007590 9097161140 1097007600 9097161240 0500406200 9099063251 5157590270 PART NAME QTY. REMARKS FUEL SEDIMENTER ................. 1 ................ INCL. ITEMS W/* BODY ASSY. 1 COVER 1 GASKET 1 PLUG 1 GASKET 1 PLUG ...................
ISUZU 4BG1 — CLUTCH ASSY. CLUTCH ASSY. PAGE 160 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — CLUTCH ASSY. CLUTCH ASSY. NO. 17 18 PART NO. 9910664500 9091505140 PART NAME BOLT LOCK WASHER QTY. 6 6 REMARKS DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD)— REV.
ISUZU 4BG1 — SWITCH AND RELAY ASSY. SWITCH AND RELAY ASSY. PAGE 162 — DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD) — REV.
ISUZU 4BG1 — SWITCH AND RELAY ASSY. SWITCH AND RELAY ASSY. NO. 15 58 417 434* PART NO. 1819001372 1823100080 1825500732 1823170070 PART NAME QTY. REMARKS ENG. STOP ACTUATOR 1 IGNITION SWITCH ................... 1 ................ INCL. ITEMS W/* EMERGENCY RELAY 1 KEY 1 DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD)— REV.
TERMS AND CONDITIONS OF SALE — PARTS Effective: July 1, 2000 PAYMENT TERMS 4. Terms of payment for parts are net 10 days. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments are F.O.B. point of origin. Multiquip’s responsibility ceases when a signed manifest has been obtained from the carrier, and any claim for shortage or damage must be settled between the consignee and the carrier. Freight is at the sender’s expense.
NOTE PAGE DCA-45SSIU2 — PARTS AND OPERATION MANUAL (STD)— REV.
PARTS AND OPERATION MANUAL PARTS AND OPERATION MANUAL HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING © COPYRIGHT 2001, MULTIQUIP INC.
