OPERATION AND PARTS MANUAL MODEL GA3.6H Series GA-3.6HZ GA3.6H GA3.6HA Portable Generators (HONDA GASOLINE ENGINE) Revision #0 (11/01/05) THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
PAGE 2 — GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
NOTE PAGE GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
TABLE OF CONTENTS Multiquip GA-3.6H Series AC Portable Generators HONDA GX240K1EDN2 ENGINE Proposition 65 Warning ............................................. 2 Table Of Contents ..................................................... 4 Parts Ordering Procedures ....................................... 5 Safety Message Alert Symbols .............................. 6-7 Rules for Safe Operation ..................................... 8-10 Specifications (Generator/Engine) ..........................
PARTS ORDERING PROCEDURES www.multiquip.com Effective: June 1st, 2005 Ordering parts has never been easier! Choose from three easy options: Best Deal! Order via Internet (Dealers Only): If you have an MQ Account, to obtain a Username and Password, E-mail us at: parts@multiquip.com. Order parts on-line using Multiquip’s SmartEquip website! ■ View Parts Diagrams ■ Order Parts ■ Print Specification Information To obtain an MQ Account, contact your District Sales Manager for more information.
GA-3.6H Series — SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! HAZARD SYMBOLS Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others. Potential hazards associated with the operation of the MQ GA-3.
GA-3H/GA-3HA — SAFETY MESSAGE ALERT SYMBOLS CAUTION Rotating Parts Hazards NEVER operate equipment with covers, or guards removed. Keep fingers, hands, hair and clothing away from all moving parts to prevent injury. CAUTION CAUTION Equipment Damage Hazards Other important messages are provided throughout this manual to help prevent damage to your portable generator, other property, or the surrounding environment.
GA-3.6H Series — RULES FOR SAFE OPERATION DANGER Read this manual! Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the GA-3.6H Series Portable Generator: GENERAL SAFETY ■ DO NOT operate or service this equipment before reading this entire manual.
GA-3.6H Series — RULES FOR SAFE OPERATION ■ ALWAYS be sure the operator is familiar with proper safety precautions and operation techniques before using generators. ■ NEVER leave the generators unattended, turn off engine when unattended. ■ Unauthorized equipment modifications will void all warranties. ■ ALWAYS ensure generators are on level ground before use. ■ DO NOT place hands or fingers inside generators engine compartment when engine is running. ■ NEVER run engine without air cleaner.
GA-3.6H Series— RULES FOR SAFE OPERATION DANGER -ELECTROCUTION HAZARDS During operation of this generation, there exists the possibility of electrocution, electrical shock or burn, which can cause severe bodily harm or even DEATH! Emergencies ■ ALWAYS know the location of the nearest fire extinguisher. ■ ALWAYS know the location of the nearest first aid kit. To avoid these hazards: NEVER use damaged or worn cables when connecting equipment to the generator.
GA-3.6H Series— SPECIFICATIONS (GENERATOR/ENGINE) Table 1. Specifications MODEL Type 60 Hz Generator GA-3.6H/GA-3.6HA/GA-3.6HZ 2-pole, Brushless Type Revolving Field Max. Output 3600 Watts Rated Voltage 120/240 V Max./Cont. Amps @ 120V 30/26.6 Max./Cont. Amps @ 240V 15/13.3 Main Circuit Breaker 2-Pole 13.5 Amps Phase Single Phase Frequency 60 Hz Rated Speed 3600 RPM Power Factor 100% Fuel Tank Capacity Approx. 5.0 U.S. Gallons (19 Liters) 170 lbs. (74 Kg.) GA3.6H/GA3.6HA 178 lbs.
GA-3.6H Series— DIMENSIONS Figure 2. Dimensions PAGE 12 — GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
GA-3.6H Series — GENERAL INFORMATION WARNING Before connecting this generators to any building’s electrical system, a licensed electrician must install an isolation (transfer) switch. Serious injury or death may result without this transfer switch.F GA-3.6H Series Familiarzation Generator The Multiquip GA-3.
GA-3.6H Series— LOAD APPLICATION Single Phase Load — 60 Hz Always be sure to check the nameplate on the generators and equipment to insure the wattage, amperage and frequency requirements are satisfactorily supplied by the generators for operating the equipment. Generally, the wattage listed on the nameplate of the equipment is its rated output.
GA-3.6H Series— CONTROLS AND INDICATORS Figure 2A. Generators Components 1. 2. 3. 4. Lifting Bail Eye – Attach a rope or chain to this lifting eye when lifting of the generators is required. Never stand underneath the generators while it is being lifted. Place lifting eye in down position when not in use. AC-Voltmeter – This voltmeter indicates (with a mark) the rated 60 Hz (single-phase) output voltage. In addition the voltmeter can also be used as a diagnostic tool.
GA-3.6H Series— CONTROLS AND INDICATORS NOTE Model GA3.6HZ shown. Location of Full Power Switch for Models GA3.6H and GA-3.6HA, is on front control panel. Figure 2B. Generators Components 11. Full Power Switch – The generators are provided with a full power switch. Figures 2C and 2D show simplified wiring diagrams of the dual voltage system.
GA-3.6H Series— CONTROLS AND INDICATORS NOTE Models GA3.6H and GA3.6HA shown. Componet location for GA3.6HZ is similar. Figure 2E. Generators Components 14. Fuel Cock Lever – Turn this lever downward to start (down)the flow of fuel into the carburetor. Turn upward to stop (up) the flow of fuel. 20. Engine Oil Drain Plug – Remove this drain plug when draining of the oil from the engine crankcase is required. Fill with recommeded type oil as listed in Table 4. 15.
GA-3.6H Series — GENERATOR REFUELING DANGER Adding fuel to the tank should be done only when the engine is stopped and has had an opportunity to cool down. In the event of a fuel spill, DO NOT attempt to start the engine until the fuel residue has been completely wiped up, and the area surrounding the engine is dry. If generators is placed in a truck bed with a plastic liner, REMOVE generators from truck bed and place on ground (Figure 3) to refuel.
GA-3.6H Series — INSTALLATION Outdoor Installation Indoor Installation Install the generator/welder in a area that is free of debris, bystanders, and overhead obstructions. Make sure the generators is on secure level ground so that it cannot slide or shift around. Also install the generators in a manner so that the exhaust will not be discharged in the direction of nearby homes. Exhaust gases from gasoline engines are extremely poisonous.
GA-3.6H Series — INSTALLATION Connecting the Ground The nut and ground terminal on the generators should always be used to connect the generators to a suitable ground. The ground cable should be #8 size wire minimum. At the generator, connect the terminal of the ground cable between the lock washer and the nut (Figure 4) and tighten the nut fully. Connect the other end of the ground cable to a suitable earth ground (ground rod). Figure 4. Generators Grounding PAGE 20 — GA-3.6H SERIES A.C.
GA-3.6H Series — PRE-INSPECTION General Inspection Prior to Operation Extension Cable Ground Power Tools When electric power is to be provided to various tools or loads at some distance from the generator, extension cords are normally used. Cables should be sized to allow for distance in length and amperage so that the voltage drop between the generators and point of use (load) is held to a minimum. Use the cable selection chart (Table 3) as a guide for selecting proper cable size.
GA-3H/HA Series — PRE-INSPECTION (ENGINE) CAUTION NEVER operate the generators in a confined area or enclosed area structure that does not provide ample free flow of air. Figure 7. Engine Oil Dipstick (Oil Level) ALWAYS wear approved eye and hearing protection before operating the generator. Before Starting 1. Read safety instructions at the beginning of manual. 2. Clean the generator, removing dirt and dust, particularly the engine cooling air inlet, carburetor and air cleaner. 3.
GA-3.6H Series— INITIAL START-UP (ENGINE) CAUTION 2. Place the choke lever (Figure 11) in the "CLOSED " position if starting a cold engine. DO NOT attempt to operate this generators until the Safety, General Information and Inspection sections of this manual have been read and thoroughly understood. This section is intended to assist the operator with the initial start-up of the portable generator.
GA-3.6H Series— INITIAL START-UP/GENERATOR OPERATION 6. If the engine has started, slowly return the choke lever (Figure 11) to the “OPEN” position. If the engine has not started repeat steps 1 through 5. 2. Place the full power switch (Figure 17) in the 120V position (up). 7. Before the generator is placed into operation, run the engine for 3-5 minutes. Check for abnormal smells, fuel leaks, and noises that would associate with lose components. 8.
GA-3.6H Series— GENERATOR OPERATION/SHUTDOWN 5. Read the voltmeter on the front panel of the generator (Figure 20) and verify that 240 VAC is present at the 240V twist-lock receptacle. Using an external voltmeter verify that 120V is present at the 120V twist-lock and GFCI duplex receptacles. Stopping the Engine 1. Place the main circuit breaker (Figure 21) in the OFF position. Figure 21. Main Circuit Breakers (Off) 2. Place the idle control switch (Figure 22) in the OFF position. Figure 22.
GA-3.6H Series— PREPARATION FOR LONG TERM STORAGE Generators Storage For storage of the generating set for over 30 days, the following is required: ■ Drain the fuel tank completely, or add STA-BIL to the fuel. ■ Run the engine until the gasoline in the carburetor is completely consumed. ■ Completely drain the oil from the crankcase and refill with fresh oil. ■ Remove the spark plug, pour 2 or 3 cc of SAE 30 oil into the cylinder and crank slowly to distribute the oil.
GA-3.6H Series— MAINTENANCE (ENGINE) Use Table 5 as a general maintenance guideline when servicing your engine. For more detail engine maintenance information, refer to the engine owner's manual supplied with your engine. Table 5. Engine Maintenance Schedule DESCRIPTION (3) OPERATION BEFORE CHECK X FIRST EVERY MONTH 3 MONTHS OR OR 10 HRS. 25 HRS. EVERY 6 MONTHS OR 50 HRS. EVERY Y E AR OR 100 HRS. EVERY 2 YEARS OR 200 HRS.
GA-3.6H Series— MAINTENANCE (ENGINE) Maintenance Perform the scheduled maintenance procedures as defined by Table 6 and below: DAILY ■ Thoroughly remove dirt and oil from the engine and control area. Clean or replace the air cleaner elements as necessary. Check and retighten all fasteners as necessary. Check the gearbox for oil leaks. Repair or replace as needed. WEEKLY ■ Remove the fuel filter cap and clean the inside of the fuel tank. ■ Remove or clean the filter at the bottom of the tank.
GA-3.6H Series — WIRING DIAGRAM (3.6HZ) GA-3.6HZ WIRING DIAGRAM Figure 28. Generator Wiring Diagram (GA-3.6HZ) GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
GA-3.6H Series— WIRING DIAGRAM (3.6H) GA-3.6H WIRING DIAGRAM Figure 29. Generator Wiring Diagram (GA-3.6H) PAGE 30 — GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
GA-3.6HA — WIRING DIAGRAM (GENERATOR) GA-3.6HA WIRING DIAGRAM Figure 30. Generators Wiring Diagram (GA-3.6HA) GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
GA-3.6H Series— TROUBLESHOOTING (ENGINE) Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take a remedial action following the diagnosis based on the Engine Troubleshooting (Table 6) and Generator Troubleshooting (Table 7) information shown below and on the proceeding page. If the problem cannot be remedied, please leave the unit just as it is and consult our company's business office or service plant. TABLE 6.
GA-3.6H Series— TROUBLESHOOTING (ENGINE) TABLE 6. ENGINE TROUBLESHOOTING (CONTINUED) SYMPTOM Insufficient power output "compression" and overheats Burns to much fuel Exhaust color is continiously "WHITE" Exhaust color is continiously "BLACK" POSSIBLE PROBLEM SOLUTION Malfunction in blower? Check or replace blower. Air in-take filter clogged? Clean or replace air in-take filter. Over accumulation of exhaust products? Clean and check valves. Check muffler, replace if necessary.
GA-3.6H Series— TROUBLESHOOTING (GENERATOR) TABLE 7. GENERATOR TROUBLESHOOTING SYMPTOM Low voltage POSSIBLE PROBLEM SOLUTION Engine speed too low? Raise engine speed to rated RPM. AC voltmeter not working? Replace AC voltmeter. Control box internal wiring malfunction? Check control box wiring. Defective ignition coil? Check red and green ignition wires. Replace ignition wires if necessary. Rotor winding malfunction? Check or replace rotor. Stator winding malfunction? Check or replace stator.
NOTE PAGE GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
GA-3.6H Series— EXPLANATION OF CODE IN REMARKS COLUMN The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. The contents and part numbers listed in the parts section are subject to change without notice . Multiquip does not guarantee the availibility of the parts listed. Sample Parts List: NO.
GA-3.6H Series— SUGGESTED SPARE PARTS GA-3.6H Series1 TO 3 UNITS WITH HONDA GX240K1EDN2 ENGINE 1 to 3 Units Qty. P/N Description 1 ........0810106004 ..............CAP FUEL TANK (GA3.6HZ) 1 ........A9924800014 ...........CAP FUEL TANK (GA3.6H/3.6HA) 1 ........A9924800004 ...........FILTER FUEL 1 ........7895419004 ..............RUBBER SUSPENSION 4 ........1725419214 ..............RUBBER SUSPENSION 3 ........9807955846 ..............SPARK PLUG 1 ........34150ZH7003 ...........ALERT UNIT, OIL 2 ........
GA-3.6H Series— NAMEPLATE AND DECALS NAMEPLATE AND DECALS PAGE 38 — GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
GA-3.6H Series — NAMEPLATE AND DECALS NAMEPLATE AND DECALS NO. PART NO. PART NAME QTY. REMARKS 1 7910501222 DECAL; CONTROL PANEL ......................................... 1......... GA-3.6HZ ONLY 1 A3511200002 DECAL; CONTROL PANEL ......................................... 1......... GA-3.6H ONLY 1 A3511200402 DECAL; CONTROL PANEL ......................................... 1......... GA3.6HA ONLY 2 87528898620 DECAL; CHOKE ......................................................... 1.........
GA-3.6H Series— GENERATOR ASSY. GENERATOR ASSY. PAGE 40 — GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
GA-3.6H Series— GENERATOR ASSY. GENERATOR ASSY. NO. PART NO. 1 7911002003 1 7901002403 1-1 * 0601823207? 1-2 * 0601823213 1-2 * 0771706304 0601822637 1-3 0071706304 * 2 7901017004 3 0801086104 4 0040010000 5 7911344003 5 A5135000103 6 7901315502 7 7871315022 8 7875021513 8 7875021523 9 7871331003 10 7901316004 11 0040008000 12 0041208000 13 7871329514 14 0601851760 15 0013608020 15A 0040008000 PART NAME QTY. REMARKS ROTOR ASSY. ............................. 1 ........... INCLUDES ITEMS W/ GA-3.
GA-3.6H Series — CONTROL BOX ASSY. (GA-3HZ) CONTROL BOX ASSY. (GA3.6HZ) PAGE 42 — GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
GA-3.6H Series — CONTROL BOX ASSY. (GA-3HZ) CONTROL BOX ASSY. (GA3.6HZ) NO PART NO PART NAME QTY. REMARKS 1 7911811403 CONTROL BOX 1 2 0601850102 GROMMET, G3 1 3 0601823853 SLOW DOWN UNIT, ND-80 1 4 0027104010 MACHINE SCREW 2 4A 0207004010 HEX. NUT 2 5 7911821413 CONTROL PANEL 1 6 7910501212 NAMEPLATE, N5431B ................................ 1 ......... S/N 2975451 AND BELOW 6 7910501222 NAMEPLATE, N-5431C ............................... 1 .........
GA-3.6H Series — CONTROL BOX ASSY. (GA-3H) CONTROL BOX ASSY. (GA-3H) PAGE 44 — GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
GA-3.6H Series — CONTROL BOX ASSY. (GA-3H) CONTROL BOX ASSY. (GA-3H) NO. PART NO. PART NAME QTY.
GA-3.6H Series — CONTROL BOX ASSY. (GA-3.6HA) CONTROL BOX ASSY. (GA-3.6HA) PAGE 46 — GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
GA-3.6H Series — CONTROL BOX ASSY. (3.6HA) CONTROL BOX ASSY. (3.6HA) NO. PART NO. PART NAME QTY. 1 A3214000103 CONTROL BOX 1 2 0601850102 GROMMET, G-3 1 3 0601823204 RECTIFIER, S5VB60 2 4 0027103012 MACHINE SCREW 2 5 0601823853 SLOW DOWN UNIT, ND-80 1 6 0027104010 MACHINE SCREW 2 6A 0207004000 HEX, NUT 2 7 A3224000103 CONTROL PANEL 1 8 0601805327 CIRCUIT BREAKER, KM-2 13.
GA-3.6H Series— MUFFLER ASSY. MUFFLER ASSY. PAGE 48 — GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
GA-3.6H Series— MUFFLER ASSY. MUFFLER ASSY. NO PART NO 1 7912310003 2 18320ZB4000 3 18325ZB4000 4 18329ZB4000 5 18355ZB4630 6 90183671003 7 0017106012 8 18333ZB4800 9 957000802000 10 7915461004 11 0017108020 12 7915460004 13 0017108025 13A 0207008000 14 0017108020 15 7915469004 16 0017106020 17 0017106012 PART NAME QTY. REMARKS MUFFLER 1 PROTECTOR ......................... 1 ......... REPLACES P/N 0602302001 PROTECTOR ......................... 1 ......... REPLACES P/N 0602302002 SEAL ......................
GA-3.6H Series — PIPE FRAME ASSY. (GA-3HZ) PIPE FRAME ASSY. (GA3.6HZ) PAGE 50 — GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
GA-3.6H Series — PIPE FRAME ASSY. (GA-3HZ) PIPE FRAME ASSY. (GA3.6HZ) NO PART NO PART NAME 1 7915412002 PIPE FRAME 2 7915415004 BRACKET 3 0017106016 HEX. HEAD BOLT 4 7915443003 BASE 5 7895419004 RUBBER SUSPENSION 6 0207008000 HEX. NUT 7 1725419214 RUBBER SUSPENSION 8 0207008000 HEX. NUT 9 0017108040 HEX. HEAD BOLT 10 0017108040 HEX. HEAD BOLT 0207008000 HEX. NUT 11 7915455103 COVER 12 7915455003 COVER 13 0017106016 HEX.
GA-3.6H Series— PIPE FRAME ASSY. (GA-3.6H/GA3.6HA) PIPE FRAME ASSY. (GA3.6H/GA3.6HA) PAGE 52 — GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
GA-3.6H Series— PIPE FRAME ASSY. (GA-3.6H/GA3.6HA) PIPE FRAME ASSY. (GA3.6H/GA3.6HA) NO. PART NO. PART NAME QTY. REMARKS 1 A3417000002 PIPE FRAME ............................... 1 ................GA-3.6H ONLY 1 A3417000202 PIPE FRAME ............................... 1 ................GA-3.
HONDA GX240K1EDN2 ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. PAGE 54 — GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
HONDA GX240K1EDN2 ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. NO. PART NO. 1 15721ZB4000 2 17211899000 3 17212ZB4003 4 17220ZB4003 5 17222ZC2000 6 17231899000 7 17235899000 8 17236899000 9 17252899000 10 17367413690 11 9405005000 12 9405006000 PART NAME TUBE BREATHER ELEMENT, AIR CLEANER SEPARATOR, AIR CLEANER HOUSING, AIR CLEANER STAY, AIR CLEANER COVER, AIR CLEANER CLIP A, AIR CLEANER WIRE CLIP B, AIR CLEANER WIRE SEAL, AIR CLEANER FILTER, DRAIN TUBE NUT, FLANGE (5MM) NUT, FLANGE (6MM) QTY.
HONDA GX240K1EDN2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. PAGE 56 — GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
HONDA GX240K1EDN2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. NO. PART NO. 1 14100ZE2W00 1 14100ZE2W01 1 14100ZE2306 2 3 4 5 6 * 7 8 9 10 11 14410ZE2013 14431ZE2010 14441ZE2000 14451ZE1013 14568ZE1000 14711ZE2000 14721ZE2000 14751ZE2003 14771ZE2000 14773ZE2000 PART NAME QTY. REMARKS CAMSHAFT ASSY. ................................... 1 ............. INCLUDES ITEMS/W USE UP TO * .................................................................................. S/N 3620688 CAMSHAFT ASSY. .....................
HONDA GX240K1EDN2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. PAGE 58 — GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
HONDA GX240K1EDN2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. NO. PART NO.
HONDA GX240K1EDN2 ENGINE — CONTROL ASSY. CONTROL ASSY. PAGE 60 — GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
HONDA GX240K1EDN2 ENGINE — CONTROL ASSY. CONTROL ASSY. NO. PART NO. 1 16550ZE2700 3 16555ZE2000 4 16561ZE2000 5 16562ZE2700 9 16570ZE2701 19 * 16584883300 23 90013883000 24 90015ZE5010 93500050350A 30 * 9405006000 33 PART NAME QTY. REMARKS ARM, GOVERNOR 1 ROD, GOVERNOR 1 SPRING, GOVERNOR 1 SPRING, THROTTLE RETURN 1 CONTROL ASSY. ................................................ 1 ...
HONDA GX240K1EDN2 ENGINE — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. PAGE 62 — GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
HONDA GX240K1EDN2 ENGINE — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. NO. PART NO. PART NAME QTY. REMARKS 2 11381ZE2801 GASKET, CASE COVER 1 3 11300ZE2000 COVER ASSY., CRANKCASE (S-TYPE) ............ 1 ........ INCLUDES ITEMS W/ USE UP TO * ........................................................................................ S/N 4211335 3 11300ZE2020 COVER ASSY., CRANKCASE ............................ 1 ........ INCLUDES ITEMS W/ * 4 15600ZG4003 CAP ASSY., OIL FILLER ....................................
HONDA GX240K1EDN2 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PAGE 64 — GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
HONDA GX240K1EDN2 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. NO. PART NO. 9 961006206000 10 13310ZE2701 16 90741ZE2000 PART NAME BEARING, RADIAL BALL (6206) CRANKSHAFT (E-TYPE) KEY, SPECIAL WOODRUFF (25X18) QTY. 1 1 1 REMARKS GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
HONDA GX240K1EDN2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. PAGE 66 — GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
HONDA GX240K1EDN2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. NO. PART NO. 1 12000ZE2815 2 15510ZE2043 3 16541ZE2010 4 31161ZE2000 5 90013883000 6 90131896650 7 90446KE1000 8 9410912000 10 91201890003 * 12 91353671003 13 9405010000 14 9425110000 15 957010601200 17 90013883000 18 34150ZH7003 19 06111ZE2408 PART NAME QTY. REMARKS CYLINDER ASSY. (ALERT) ................................. 1 ........ INCLUDES ITEMS W/ * SWITCH ASSY.
HONDA GX240K1EDN2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 68 — GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
HONDA GX240K1EDN2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. NO. PART NO. 1 12200ZH9405 2 12204ZE2306 3 * 12205ZE2305 12216ZE2300 4 * 5 12251ZE2800 6 12310ZE2020 8 14775ZE2010 11 90014ZE2000 12 90042ZE2700 13 90047ZE2000 13 92900080320E 14 90441ZE2010 15 9430112200 18 957011008000 19 9807955846 19 9807955855 PART NAME QTY. REMARKS CYLINDER HEAD ................................................ 1 ........ INCLUDES ITEMS W/ * GUIDE, VALVE (OS) (OPTIONAL) 1 GUIDE, EX.
HONDA GX240K1EDN2 ENGINE — FAN COVER ASSY. FAN COVER ASSY. PAGE 70 — GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
HONDA GX240K1EDN2 ENGINE — FAN COVER ASSY. FAN COVER ASSY. NO. PART NO. 2 19610ZE2700ZD 3 19631ZE2D00 6 81329567020 7 90013883000 8 90654SA4003 PART NAME COVER, FAN *NH1* (BLACK) SHROUD GROMMET, DRAIN HOLE BOLT, FLANGE (6X12) (CT200) CLIP, WIRE HARNESS (6MM) (WHITE) QTY. 1 1 1 6 2 REMARKS GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
HONDA GX240K1EDN2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. PAGE 72 — GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
HONDA GX240K1EDN2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. NO. PART NO. 2 19511ZE2000 5 28451ZE2W01 10 31100ZE2812 13 90201ZE3790 13 90201ZE3V00 PART NAME QTY. REMARKS FAN, COOLING 1 PULLEY STARTER 1 FLYWHEEL, LAMP 1 NUT, SPECIAL 16MM ......................................... 1 ........ USE UP TO S/N 3467138 NUT, SPECIAL 16MM ......................................... 1 ........ USE FROM TO S/N 3467139 GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
HONDA GX240K1EDN2 ENGINE — IGNITION COIL ASSY. IGNITION COIL ASSY. PAGE 74 — GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
HONDA GX240K1EDN2 ENGINE — IGNITION COIL ASSY. IGNITION COIL ASSY. NO. PART NO. 1 30500ZF6W02 2 30700ZE1013 3 31510ZE1811 4 31510ZE3003 6 31511ZE2000 7 31512ZE2000 10 36101ZE2701 11 36103ZE1000 12 90015883000 13 90013883000 PART NAME COIL ASSY., IGNITION CAP ASSY., NOISE SUPPRESSOR COIL ASSY., LAMP (12V/25W) COIL ASSY., LAMP (12V/25W) CLAMP, WIRE GROMMET, WIRE WIRE, STOP SWITCH (470MM) HOLDER, STOP SWITCH WIRE BOLT, FLANGE (6X28) BOLT, FLANGE (6X12) (CT200) QTY. 1 1 1 1 1 1 1 1 6 1 REMARKS GA-3.
HONDA GX240K1EDN2 ENGINE — PISTON ASSY. PISTON ASSY. PAGE 76 — GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
HONDA GX240K1EDN2 ENGINE — PISTON ASSY. PISTON ASSY. NO. PART NO. 1 13010ZE2013 1 13011ZE2013 1 13012ZE2013 1 13013ZE2013 2 13101ZE2W00 2 13102ZE2W00 2 13103ZE2W00 2 13104ZE2W00 3 13111ZF6000 4 13200ZE2010 5 90001ZE8000 * 90551ZE1000 6 PART NAME QTY. REMARKS RING SET, PISTON (STD) .................................. 1 ........ USE UP TO S/N 4081304 RING SET, PISTON (OS 0.25, OPTIONAL) ........ 1 ........ USE UP TO S/N 4081304 RING SET, PISTON (OS 0.50, OPTIONAL) ........ 1 ........
HONDA GX240K1EDN2 ENGINE — RECOIL STARTER ASSY. RECOIL STARTER ASSY. PAGE 78 — GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
HONDA GX240K1EDN2 ENGINE — RECOIL STARTER ASSY. RECOIL STARTER ASSY. NO. PART NO. 1 28400ZE2W01ZB 2 28410ZE2W01ZB * 3 * 28421ZE2W01 4 * 28422ZE2W01 5 28441ZE2W01 * 6 * 28442ZE2W01 7 28443ZE2W01 * 8 * 28444ZE2W01 9 * 28445ZE2W01 10 28461ZE2W02 * 11 * 28462ZE2W01 11 * 28462ZE2W11 12 28469ZE2W01 * 13 90004ZE2W01 * 90008ZE2003 14 PART NAME QTY. REMARKS STARTER ASSY., RECOIL *NH1* (BLACK) ........ 1 ........
HONDA GX240K1EDN2 ENGINE — SOLENOID ASSY. SOLENOID ASSY. PAGE 80 — GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
HONDA GX240K1EDN2 ENGINE — SOLENOID ASSY. SOLENOID ASSY. NO. PART NO. 1 * 16252ZA1010 16268893000 2 * 3 16270ZB4010 4 16271ZB4000 * 5 * 16273ZB4000 6 * 36160ZB4003 7 90013883000 * 8 * 91502ZB4701 9 * 93500050080A 9454004018 10 * PART NAME QTY. REMARKS CAP, CHOKE LEVER 1 SPRING, CHOKE RETURN 1 AUTO-THROTTLE ................................................ 1 ............. INCLUDES ITEMS W/ * STAY, SOLENOID THROTTLE 1 LEVER, SOLENOID THROTTLE 1 SOLENOID ASSY.
HONDA GX240K1EDN2 ENGINE — LABELS ASSY. LABELS ASSY. PAGE 82 — GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
HONDA GX240K1EDN2 ENGINE — LABELS ASSY. LABELS ASSY. NO. PART NO. 1 87521ZE2W01 4 87528898620 6 87533ZC0630 10 87594ZB4A00 PART NAME EMBLEM MARK, CHOKE MARK, AIR CLEANER MARK, OIL CAUTION QTY. 1 1 1 1 REMARKS GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
TERMS AND CONDITIONS OF SALE — PARTS Effective: October 1, 2002 PAYMENT TERMS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Terms of payment for parts are net 10 days. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments are F.O.B. point of origin.
NOTE PAGE GA-3.6H SERIES A.C. GENERATORS — OPERATION & PARTS MANUAL — REV.
OPERATION & PARTS MANUAL HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING UNITED STATES Multiquip Corporate Office 18910 Wilmington Ave. Tel. (800) 421-1244 Carson, CA 90746 Fax (800) 537-3927 Contact: mq@multiquip.com Mayco Parts 800-306-2926 Fax: 800-672-7877 310-537-3700 Fax: 310-637-3284 Service Department 800-421-1244 Fax: 310-537-4259 310-537-3700 MQ Parts Department 800-427-1244 310-537-3700 MEXICO UNITED KINGDOM MQ Cipsa Carr. Fed. Mexico-Puebla KM 126.