Product Manual

ga3.6HR

1. Place main circuit breaker (Figure 25) in the 
position.
Figure 25. Main Circuit Breaker (OFF)
2. Place idle control switch (Figure 26) in the ON position.
Figure 26. Idle Control switch (ON)
3. Let engine run at idle with no load for 2-3 minutes.
4. To shut-down the engine, place the generator's
operation switch (Figure 27) in the F position).
Figure 27. Operation Switch (OFF)
ON
OFF
OFF
ON
ON
OFF
5. Place engine fuel valve lever (Figure 28) in the 
position.
Figure 28. Engine Fuel Valve Lever (OFF)
6. Remove all loads from the generator.

1. Place operation switch (Figure 29) in the position.
Figure 29. Operation Switch (Emergency)
ON
OFF
SHUTDOWN