OPERATION AND PARTS MANUAL MODEL QP3TZ TRASH PUMP (Hatz 1B30 Diesel Engine) Revision #3 (10/21/11) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
PROPOSITION 65 WARNING Diesel engine exhaust and some of PAGE 2 — QP3TZ TRASH PUMP — OPERATION AND PARTS MANUAL — REV.
NOTES QP3TZ TRASH PUMP — OPERATION AND PARTS MANUAL — REV.
TABLE OF CONTENTS MQ QP3TZ Trash Pump Hatz 1B30 Diesel Engine Proposition 65 Warning ............................................. 2 Table of Contents ...................................................... 4 Parts Ordering Procedures ....................................... 5 Safety Information ................................................ 6-10 Pump Specifications/Dimensions .............................11 Engine Specifications ...............................................12 General Information .....
www.multiquip.com PARTS ORDERING PROCEDURE Ordering parts has never been easier! Choose from three easy options: Order via Internet (Dealers Only): Best Deal! Effective: January 1st, 2006 If you have an MQ Account, to obtain a Username and Password, E-mail us at: parts@multiquip. com. Order parts on-line using Multiquip’s SmartEquip website! N View Parts Diagrams N Order Parts N Print Specification Information To obtain an MQ Account, contact your District Sales Manager for more information.
SAFETY INFORMATION Do not operate or service the equipment before reading the entire manual. Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the safety messages and operating instructions could result in injury to yourself and others. Potential hazards associated with the operation of this equipment will be referenced with hazard symbols which may appear throughout this manual in conjunction with safety messages.
SAFETY INFORMATION GENERAL SAFETY CAUTION NEVER operate this equipment without proper protective clothing, shatterproof glasses, respiratory protection, hearing protection, steel-toed boots and other protective devices required by the job or city and state regulations. NEVER operate this equipment when not feeling well due to fatigue, illness or when under medication. NEVER operate this equipment under the influence of drugs or alcohol.
SAFETY INFORMATION CAUTION NEVER lubricate components or attempt service on a running machine. NEVER block or restrict flow from discharge hose. Remove kinks from discharge line before starting pump. Operation with a blocked discharge line can cause water inside pump to overheat. NOTICE ALWAYS fill the pump casing with water before starting the engine. Failure to maintain water inside the pump housing will cause severe damage to the pump and mechanical seal.
SAFETY INFORMATION FUEL SAFETY DANGER DO NOT add fuel to equipment if it is placed inside truck bed with plastic liner. Possibility exists of explosion or fire due to static electricity. BATTERY SAFETY (ELECTRIC START ONLY) DANGER DO NOT drop the battery. There is a possibility that the battery will explode. DO NOT expose the battery to open flames, sparks, cigarettes, etc. The battery contains combustible gases and liquids.
SAFETY INFORMATION TRANSPORTING SAFETY CAUTION NEVER allow any person or animal to stand underneath the equipment while lifting. NOTICE Before lifting, make sure that the equipment parts (hook and vibration insulator) are not damaged and screws are not loose or missing. Always make sure crane or lifting device has been properly secured to the lifting bail (hook) of the equipment. ENVIRONMENTAL SAFETY NOTICE Dispose of hazardous waste properly.
SPECIFICATIONS/DIMENSIONS (PUMP) Table 1. Specifications (Pump) Model QP3TZ Type Trash Pump Suction & Discharge Size Pump 3.00 in. (76 mm.) Maximum Pumping Capacity 383 gallons/minute (1,450 liters/minute) Max. Solids Diameter Dimension (L x W x H) 1.50 in. (38 mm.) Max. Lift 25 ft. (7.62 meters) Max. Head 90 ft. (27.0 meters) 27.8 x 20.0 X 25.0 in. (705 X 510 X 635 mm.) Dry Net Weight 163 lbs. (74 Kg.) 20.0 IN. (51 CM.) 25 IN. (63.5 CM.) 27.8 IN. (70.5 CM.) Figure 1.
SPECIFICATIONS (ENGINE) Table 2. Engine Specifications (HATZ 1B30) HATZ Diesel Model 1B30 Air-Cooled No. Cylinders Displacement Idle Speed Lube Oil Capacity Type Air Cleaner Starting Method Weight 1 347 cu. cm. (.347 liters) 800 RPM's 1.16 qts. (1.1 liters) Dry Element Recoil Star t 88.18 lbs. (40 kg.) Engine Oil Type CCMC - D4 - D5 - PD@ or API - CDCE - CF -CG or SHPD Type Fuel EN 590 - DIN 51601 BS 2869 A1/A2ASTM D 975-1D/2D 100 90 80 70 TOTAL HEAD FT. 60 50 40 1.6 FT. 30 20 23.
GENERAL INFORMATION APPLICATION The QP3TZ Trash Pump is designed to be used for dewatering applications. Both the suction and discharge ports on the QP3TZ trash pump use a 3-inch diameter opening, which allows the pump to pump at a rate of approximately 383 gallons/minute (gpm) or 1,450 liters/minute (lpm). Trash or self-priming pumps are designed to purge air from the suction line and create a partial vacuum in the pump body.
COMPONENTS Figure 2 shows a typical application using the QP3TZ Trash pump. Please note that this pump is intended for the removal of clean water and water containing some debris and solids. Maximum size of solids should not exceed 1.5 inch (30 mm) in diameter. DO NOT set strainer on bottom of water bed. Placing the strainer above the water bed will prevent the pump from drawing in excessive amounts of sand and foreign debris. Figure 2.
BASIC ENGINE Figure 4. Engine Controls and Components INITIAL SERVICING The engine (Figure 4) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturer’s Engine manual for instructions & details of operation and servicing. 1. Fuel Filler Cap/Fuel Tank – Pull this latch to add diesel fuel to the tank. After refueling, always make sure the fuel cap is latched properly. DO NOT over fill. For additional information refer to engine owner's manual. 6.
INSPECTION 3. Insert and remove the dipstick without screwing it into the filler neck. Check the oil level shown on the dipstick. CAUTION NEVER operate the pump in a confined area or enclosed area structure that does not provide ample free flow of air. 4. If the oil level is low (Figure 6), fill to the edge of the oil filler hole with the recommended oil type (Table 5). Maximum oil capacity is 1.16 quarts (1.1 liters) CAUTION ALWAYS wear approved eye and hearing protection before operating the pump.
INSPECTION Before Starting 1. Read safety instructions at the beginning of manual. NOTE Suction and discharge hoses are available from Multiquip. Contact your nearest dealer for more information. 2. Place pump as near to water as possible, on a firm flat, level surface. 3. To prime pump, remove fill cap (Figure 2) and fill pump casing with water. If the pump casing is not filled with water before starting, it will not begin pumping. NOTICE Pump casing must be filled with water before using pump.
OPERATION CAUTION CAUTION DO NOT attempt to operate the pump until the Safety, General Information and Inspection sections of this manual have been read and thoroughly understood. This section is intended to assist the operator with the initial start-up of the trash pump. It is extremely important that this section be read carefully before attempting to use the pump in the field. Starting the Engine (HATZ engine) 3. Move the engine speed lever to the START position (Figure 8).
MAINTENANCE Pump Vacuum Test NOTICE DO NOT attempt to start the engine unless the pump has previously been primed with water. Severe pump damage will occur if pump has not been primed. To perform the pump vacuum test do the following: 1. Remove the pump fill cap (Figure 2), and fill the pump with water. 2. Start the engine as outlined in the initial start-up section, and wait for the pump to begin pumping. 3.
MAINTENANCE CAUTION DO NOT RUN PUMP WITHOUT WATER. PLACE VACUUM TESTER OVER PUMP SUCTION PORT DISCHARGE PORT WATER HOSE DIRECTION OF WATER FLOW WATER SOURCE NOTICE Pressure reading may vary depending on altitude. See Tables 3 and 4. -15 0 -20 -1 -60 -40 -25 -80 -20 -100 kPa in. Hg 0 -3 PUMP VACUUM TESTER WIKA -5 ACCEPTABLE READING SHOULD BE BETWEEN -25 AND -20 IN. HG. 25 IN. HG. TRANSLATES INTO 25 FEET OF LIFT AT SEA LEVEL. R Figure 13.
MAINTENANCE Engine Maintenance Perform engine maintenance procedures as referenced by Table 6 below: Table 6. Engine Maintenance Schedule DESCRIPTION (3) OPERATION BEFORE CHECK X FIRST EVERY MONTH 3 MONTHS OR OR 10 HRS. 25 HRS. EVERY 6 MONTHS OR 50 HRS. EVERY YEAR OR 100 HRS. EVERY 2 YEARS OR 200 HRS.
MAINTENANCE Maintenance Perform the engine maintenance procedures as indicated below: DAILY ■ Thoroughly remove dirt and oil from the engine and control area. Clean or replace the air cleaner elements as necessary. Check and retighten all fasteners as necessary. Check the spring box and bellows for oil leaks. Repair or replace as needed. DANGER DO NOT use gasoline as a cleaning solvent, because that would create a risk of fire or explosion. ENGINE AIR CLEANER 1.
PREPARATION FOR LONG-TERM STORAGE Pump Storage Pull the recoil starter grip slowly. STOP when it feels tight. This closes the intake and exhaust valves For storage of the pump for over 30 days, the following is (compression position) , and helps prevents rust from required: forming. Drain the fuel tank completely. Wipe any oil or dirt that may have accumulated on the engine. Run the engine for about 3 minutes and then stop. Stop the engine.
TROUBLESHOOTING Troubleshooting (Engine) Symptom Engine will not start or start is delayed, although engine can be turned over. At low temperatures engine will not start. Engine fires but stops soon as starter is switched off. Engine stops by itself during normal operation. Low engine power, output and speed. Possible Problem Solution No Fuel reaching injection pump? Add fuel. Check entire fuel system. Defective fuel pump? Replace fuel pump.
TROUBLESHOOTING Troubleshooting (Engine) - continued Symptom Low engine power output and low speed, black exhaust smoke. Engine overheats. Possible Problem Solution Air filter blocked? Clean or replace air filter. Incorrect valve clearances? Adjust valves per engine specification. Malfunction at injector? See engine manual. Too much oil in engine crankcase? Drain off engine oil down to uppermark on dipstick.
EXPLANATION OF CODE IN REMARKS COLUMN The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. NOTICE The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availability of the parts listed. SAMPLE PARTS LIST NO. 1 2% 2% 3 4 PART NO. PART NAME QTY. REMARKS 12345 BOLT......................1 .....
SUGGESTED SPARE PARTS QP3TZ TRASH PUMP 1 TO 3 UNITS W/ 1B30 Qty. P/N Description 2 ............ KIT3T .................... KIT, MECHANICAL SEAL, O-RINGS 1 ............ 2367040032 .......... IMPELLER, S/N 0381 AND BELOW 1 ............ 2367040031 .......... IMPELLER, S/N 0382 AND ABOVE 4 ............ 0631211159 .......... FLOODING CAP, W/ O-RING 3 ............ 50426000 .............. ELEMENT, AIR CLEANER 1 ............ 05088901 .............. ROPE STARTER 1 ............ 01535302 ..............
PUMP ASSY. 59 SEAL KIT 6 58 PAGE 28 — QP3TZ TRASH PUMP — OPERATION AND PARTS MANUAL — REV.
PUMP ASSY. PUMP ASSY. NO. PART NO.
PUMP ASSY. 59 SEAL KIT 6 58 PAGE 30 — QP3TZ TRASH PUMP — OPERATION AND PARTS MANUAL — REV.
PUMP ASSY. PUMP ASSY. (cont.) NO. PART NO. 38 0181090820 39 0181090825 40 41# 42 43 44 45 46 47 48 49 50 0151191257 0520040431 43342012400011 0204490060 0458220080 0205490080 0205490100 0205490100 0401650100 0451290080 0451290080 51 52 53 54 0451290100 0451290080 0451290100 0451290100 55 56 57 58 59 0480570850 1992108050 0742214080 1B30 KIT3T PART NAME QTY.
SPARE PARTS KITS ASSY. PAGE 32 — QP3TZ TRASH PUMP — OPERATION AND PARTS MANUAL — REV.
SPARE PARTS KITS ASSY. SPARE PARTS KITS ASSY. NO. 1 2 3 4 PART NO. 01582200 01582300 01582400 01582500 PART NAME GASKET SET CYL. HEAD GASKET SET CRANKCASE MAINTENANCE KIT- 1000 HRS EMERGENCY KIT QTY. 1 1 1 1 REMARKS QP3TZ TRASH PUMP — OPERATION AND PARTS MANUAL — REV.
ACCESSORIES ASSY. PAGE 34 — QP3TZ TRASH PUMP — OPERATION AND PARTS MANUAL — REV.
ACCESSORIES ASSY. ACCESSORIES ASSY. NO. 1 2 3 4 PART NO. 01578700 05120100 05130000 05130100 PART NAME TOOL KIT DECAL MAINTENANCE DECAL START DECAL QTY. 1 1 1 1 REMARKS QP3TZ TRASH PUMP — OPERATION AND PARTS MANUAL — REV.
CRANKCASE AND ENGINE MOUNT ASSY. NOTE: Refer to Table 9 at the end of the manual for letter ( A to L) call-outs. PAGE 36 — QP3TZ TRASH PUMP — OPERATION AND PARTS MANUAL — REV.
CRANKCASE AND ENGINE MOUNT ASSY. CRANKCASE AND ENGINE MOUNT ASSY. NO. 1 2 * 3 * 5 * 6 * 8 * 9 * 10 * 11 * 12 * 13 14 15 16 17% 18% 19 20 21 22 23 24 25 PART NO.
CRANKSHAFT ASSY. PAGE 38 — QP3TZ TRASH PUMP — OPERATION AND PARTS MANUAL — REV.
CRANKSHAFT ASSY. CRANKSHAFT ASSY. NO. 1 2 * 3 * 4 6 7 8 9 10 11 12 13 14 15 16 PART NO. 01334200 04125300 05127401 05142700 05127600 05127700 05127801 40065600 50021600 04114201 50443600 05141600 05107301 50473700 PART NAME QTY. REMARKS CRANKSHAFT NO. X W? PLUG ......................... 1 .................INCLUDES ITEMS W/ * CRANKSHAFT .................................................... 1 ................. NOT SOLD SEPARATELY CLOSING PLUG 12 MM 1 STUBSHAFT NO. 4 SAE GEN 1 STUBSHAFT TAP 25 DIA.
CAMSHAFT ASSY. PAGE 40 — QP3TZ TRASH PUMP — OPERATION AND PARTS MANUAL — REV.
CAMSHAFT ASSY. CAMSHAFT ASSY. NO. 1 3 * 4 * 5 * 6 * 7 * 8 * 9 10 11 12 13 14 PART NO. 01503520 01326400 50123200 01326600 50255300 01326500 04121700 04112100 04112200 04112300 04125100 04125200 PART NAME QTY. REMARKS CAMSHAFT ASSY. ..................................... 1 .............. INCLUDES ITEMS W/ * CAMLEVER 1 SHIM 5X10X0.5 DIN988 2 FLYWEIGHT 1 LOCK WASHER 2 FLYWEIGHT 1 CAMSHAFT................................................. 1 .............. NOT SOLD SEPARATELY WASHER 0.9MM 23X38X0.9 1 WASHER 1.
PISTON ASSY. PAGE 42 — QP3TZ TRASH PUMP — OPERATION AND PARTS MANUAL — REV.
PISTON ASSY. PISTON ASSY. NO. 1 2 % * 3 % * 4 % * 5 % * 6% 7 8 9$ 10$ 11 12 PART NO. 01328501 50464000 50463600 01328601 01582600 01329201 04113100 01582100 01582000 PART NAME QTY. REMARKS PISTON 80MM ASSY. ................................. 1 .............. INCLUDES ITEMS W/ * PISTON 80MM ............................................ 1 .............. NOT SOLD SEPARATELY CIRCLIP 2 PISTON PIN 1 PISTON RING SET 80MM 1 CYLINDER .................................................. 1 ..............
CYLINDER HEAD ASSY. PAGE 44 — QP3TZ TRASH PUMP — OPERATION AND PARTS MANUAL — REV.
CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. NO. 1 2 * 3 * 5 6 7 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 PART NO.
OIL PUMP/GOVERNOR ASSY. NOTE: Refer to Table 9 at the end of the manual for letter ( A to L) call-outs. PAGE 46 — QP3TZ TRASH PUMP — OPERATION AND PARTS MANUAL — REV.
OIL PUMP/GOVERNOR ASSY. OIL PUMP/GOVERNOR NO. 1 2 * 3 * 4 * 5 * 6 * 7 8 9 10 11 12 13 14 15 16 17 18 18 19 20 21 22 23 25 26 27 28 29 30 31 32 34 35 36 37 38 39 PART NO. 01530210 50434901 05097100 50447900 50429400 05097300 04102900 50447400 50447500 05078600 50434800 05079400 01530402 50422400 50125800 50435000 05079800 05131600 05078900 05148600 50144400 50144500 04095600 03927300 05079301 50092700 50347100 01333000 50114300 50144500 50144400 50423900 04122900 01316402 PART NAME QTY.
OIL PUMP/GOVERNOR ASSY. NOTE: Refer to Table 9 at the end of the manual for letter ( A to L) call-outs. PAGE 48 — QP3TZ TRASH PUMP — OPERATION AND PARTS MANUAL — REV.
OIL PUMP/GOVERNOR ASSY. OIL PUMP/GOVERNOR (cont.) NO. 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 PART NO. 40022401 50138100 50004200 05079601 05078501 50475300 05151300 50475400 50328300 04122800 04000200 05130900 05130800 50465300 05146900 05147001 05151700 50475800 50475700 PART NAME O- RING 8X2 THREADED PIN M6X35 THREADED PIN M6X18 CENTRIFUGAL WEIGHT GOVERNOR SLEEVE FILL. HEAD SCREW 5X25 SUPPORT PIN 5X8 HEX. NUT M6 PLATE SPRING TENSION SPRING GOVERNOR SPRING STOP PLATE CYL.
TIMING COVER ASSY. NOTE: Refer to Table 9 at the end of the manual for letter ( A to L) call-outs. PAGE 50 — QP3TZ TRASH PUMP — OPERATION AND PARTS MANUAL — REV.
TIMING COVER ASSY. TIMING COVER ASSY. NO. 1 2 * 3 * 4 * 5 * 5 6 * 7 * 8 9 10 11 12$ 13$ 14$ 15$ 16$ 17$ 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 * 39 40 41 42 43 44 45 46 PART NO.
FLYWHEEL ASSY. PAGE 52 — QP3TZ TRASH PUMP — OPERATION AND PARTS MANUAL — REV.
FLYWHEEL ASSY. FLYWHEEL ASSY. NO. 2 3 4 5 6 PART NO. 01321310 50327300 50003400 04117300 04110302 PART NAME BLOWER RING ALL. SCREW M4X20 SPRING WASHER A4 STICKER “TDC” FLYWHEEL QTY. 1 6 6 1 1 REMARKS QP3TZ TRASH PUMP — OPERATION AND PARTS MANUAL — REV.
FUEL INJECTION ASSY. PAGE 54 — QP3TZ TRASH PUMP — OPERATION AND PARTS MANUAL — REV.
FUEL INJECTION ASSY. FUEL INJECTION ASSY. NO. 1 2$ 3#$ 4#$ 4 5#$ 6#$ 8$ 9$ 10$ 11$ 12$ 13$ 14$ 15$ 16$ 17$ 18$ 19$ 20$ 21$ 22$ 23$ 24$ 25$ 26$ 27$ 28+$ 29+$ 30+$ 31+$ 32+$ 33 PART NO. 01328800 01582800 05096101 05070601 05081500 50436400 50436500 50436600 50436700 50436800 50436900 50437000 50437100 50437200 50437300 50437400 50437500 50437600 50437700 50437800 50437900 50438000 50438100 50438200 50438300 50442200 05070500 PART NAME QTY. REMARKS INJECTOR ASSY. ................................. 1 ........
FUEL INJECTION ASSY. PAGE 56 — QP3TZ TRASH PUMP — OPERATION AND PARTS MANUAL — REV.
FUEL INJECTION ASSY. FUEL INJECTION ASSY. NO. 34 35 * 36 37* 38* * 39 40* 41* * 42 43* * 44 45* * 46 47* 48* * 49 50 51 52 53 54 60 55 56$ 57$ 58$ 59$ 60 PART NO. 01322200 01330800 04096300 04096400 04096500 04096600 04096700 50471600 50476900 50476500 50445900 50476000 50433900 04097700 50323900 05089300 05056700 05084201 01326100 50464500 50110800 05129000 05130300 05084201 PART NAME QTY. REMARKS INJECTION PUMP ............................... 1 ............. INCLUDES ITEMS W/ * CONTROL SLEEVE 1 SHIM 0.
RECOIL STARTER ASSY. NOTE: Refer to Table 9 at the end of the manual for letter ( A to L) call-outs. PAGE 58 — QP3TZ TRASH PUMP — OPERATION AND PARTS MANUAL — REV.
RECOIL STARTER ASSY. RECOIL STARTER ASSY. NO. 1 2 * 4 # * 4 # * 5 * 6 * 7 * 8 * 9 * 10 * 11 * 12 * 13 * 14 * 15 * 16 * 17 18 19 20 PART NO. 01515002 01497800 03665200 05045201 01569300 50081200 50062700 05088901 01548800 05044901 05045001 50146300 50165600 05044800 05061300 50062700 50170900 50445800 05109100 PART NAME QTY. REMARKS RECOIL STARTER ASSY. ............................... 1 ............... INCLUDES ITEMS W/ * HANDLE ASSY. ............................................... 1 ...............
AIR DUCT ASSY. NOTE: Refer to Table 9 at the end of the manual for letter ( A to L) call-outs. PAGE 60 — QP3TZ TRASH PUMP — OPERATION AND PARTS MANUAL — REV.
AIR DUCT ASSY. AIR DUCT ASSY. NO. 1 2 3 4 5 6 7 8 * 9 * 10 * 11 12 13 14 15 16 17 19 20 21 22 23 24# 25# 26 27 29 30 31 32 33 35 36 37 38 39 PART NO. 01551401 01551301 50170900 50146300 50120000 50144400 01326300 05128900 50334800 50163801 50441600 50445400 50335600 50144400 50114300 50177100 01326800 04099500 04098400 01326700 01326200 04111500 05108100 04124600 03575500 00921400 05081700 50453300 01599600 50328000 50095100 50344700 50144500 50170900 PART NAME QTY.
AIR DUCT ASSY. NOTE: Refer to Table 9 at the end of the manual for letter ( A to L) call-outs. PAGE 62 — QP3TZ TRASH PUMP — OPERATION AND PARTS MANUAL — REV.
AIR DUCT ASSY. AIR DUCT ASSY. (cont.) NO. 40 41 42 43 44 45 46 47 48 49 50 50 51 52 53 54 55 56 57 58 59 PART NO. 50144400 04119100 50458100 05007300 04042000 05132900 04116700 50464401 40028300 05133800 05133900 05133900 05132700 50148000 05133000 50445000 05132800 50170900 50144400 05145800 05097600 PART NAME HEX. NUT M6 TUBE 6X8X14 STUD M6X45 SEALING STRIP 48MM WASHER 6.5X22.5X1 BUSH 6.5X13X14 COVER STUD M6X35 HEX. NUT M6 RUBBER RING 17X28X5 RUBBER RING 17X28X9 RUBBER RING 17X28X9 BUSH 6.5X17Z11.5 HEX.
CRANKCASE BREATHER ASSY. PAGE 64 — QP3TZ TRASH PUMP — OPERATION AND PARTS MANUAL — REV.
CRANKCASE BREATHER ASSY. CRANKCASE BREATHER ASSY. NO. 1 2 * 3 * 4 * 5 PART NO. 01599200 05102900 01617900 01551600 PART NAME QTY. REMARKS OIL SEPARATOR ASSY. ................................. 1 ............... INCLUDES ITEMS W/ * OIL SEPARATOR ............................................. 1 ............... NOT SOLD SEPARATELY FILTER BREATHER SYSTEM 1 BREATHER TUBE ........................................... 1 ...............
FUEL TANK ASSY. (OLD STYLE) NOTE: Refer to Table 9 at the end of the manual for letter ( A to L) call-outs. PAGE 66 — QP3TZ TRASH PUMP — OPERATION AND PARTS MANUAL — REV.
FUEL TANK ASSY. (OLD STYLE) FUEL TANK ASSY. (OLD STYLE) NO. 1 2 * 3 4* 5* * 6 7* 8* * 9 11* 12 * 13 14 15 16 17 18 19* * 20 21* 22 23 24 25 26 * 27 * 28 # * 29 * 30 * 31 34 35 36 37 38 39 40 41 42 43 44 49 50 51 52 53 54 55 * PART NO.
FUEL TANK ASSY. (NEW STYLE) PAGE 68 — QP3TZ TRASH PUMP — OPERATION AND PARTS MANUAL — REV.
FUEL TANK ASSY. (NEW STYLE) FUEL TANK ASSY. (NEW STYLE) NO. PART NO.
FUEL TANK ASSY. (NEW STYLE) PAGE 70 — QP3TZ TRASH PUMP — OPERATION AND PARTS MANUAL — REV.
FUEL TANK ASSY. (NEW STYLE) FUEL TANK ASSY. (NEW STYLE - cont.) NO. 51+ 52 53 54 55# * 59 60 61 63 64* 65 66% 67% 68% 69% 70+ 71+ 72+ 73+ 74+ 75 76+ 77+ 78+ 79+ 80+ 81+ 82+ 83+ 84+ 85+ 86+ 87+ 88 89+ 90+ 91 92 93# 94# 95# PART NO.
AIR FILTER ASSY. AIR FILTER ASSY. NOTE: Refer to Table 9 at the end of the manual for letter ( A to L) call-outs. PAGE 72 — QP3TZ TRASH PUMP — OPERATION AND PARTS MANUAL — REV.
AIR FILTER ASSY. AIR FILTER ASSY. NO. 1 * 2 3 4 5 6 7 8 9 10 11 12 * 13 14 15 16 17 * 35 36 PART NO. 05107600 05056400 50171500 50426000 50454300 05107500 50435800 01607900 50452200 04116600 04116501 05056100 50095100 05056300 05088300 05098100 05132000 04116700 PART NAME QTY. REMARKS SEALING STRIP 1 WASHER 1 ALL. SCREW M8X25 3 AIR FILTER ELEMENT ................................... 1 ............... IN MAINTENANCE KIT NUT M6 1 COVER AIR FILTER 1 RUBBER SLEEVE 1 AIR FILTER HOUSING ASSY ....................
MUFFLER ASSY. PAGE 74 — QP3TZ TRASH PUMP — OPERATION AND PARTS MANUAL — REV.
MUFFLER ASSY. MUFFLER ASSY. NO. 1 2 3 4 5 6 7 8 9 10 11 12 14 15 16 17 18 19 20 22 23 24 25 26 27 28 29 31 32 34 35 36 37 38 39 PART NO. 40028300 50144500 01531311 05081101 05081410 50422500 01531201 05081611 50128100 05103600 50144500 40028300 50028900 50450500 05103401 05081002 05104100 05104000 05103500 40028400 50445201 50148100 40028400 05083900 05103901 05103801 50445000 01560200 05100300 04054300 05127000 50460700 50460800 50144500 40028300 PART NAME QTY. REMARKS HEX.
SEALING AND BONDING ADHESIVES TABLE 9. SEALING AND BONDING ADHESIVES Item Part Number Description Amount A 50223001 Loctite Activator 500 ml B 50223100 Loctitie 573 50 ml C 50223200 Loctite 601 50 ml D 50223300 Loctitie 221 50 ml E 50223400 Loctite 648 10 ml F 50223800 + 50223900 Technicoll 8058 Technicoll 8367 0.75 kg 0.
TERMS AND CONDITIONS OF SALE — PARTS PAYMENT TERMS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Multiquip reserves the right to quote and sell direct to Government agencies, and to Original Equipment Manufacturer accounts who use our products as integral parts of their own products. a. SPECIAL EXPEDITING SERVICE Terms of payment for parts are net 30 days.
OPERATION AND PARTS MANUAL HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING UNITED STATES Multiquip Corporate Office 18910 Wilmington Ave. Carson, CA 90746 Contact: mq@multiquip.com MQ Parts Department Tel. (800) 421-1244 Fax (800) 537-3927 Mayco Parts 800-427-1244 310-537-3700 Fax: 800-672-7877 Fax: 310-637-3284 Warranty Department 800-306-2926 310-537-3700 Fax: 800-672-7877 Fax: 310-637-3284 Service Department 800-421-1244, Ext. 279 310-537-3700, Ext.