OPERATION AND PARTS MANUAL MC-42S © COPYRIGHT 2004, MULTIQUIP INC. CONCRETE MIXER FINAL REVISION Revision #8 (12/16/05) MULTIQUIP INC.. PARTS DEPARTMENT: 18910 WILMINGTON AVE. 800-427-1244 CARSON, CALIFORNIA 90746 FAX: 800-672-7877 SERVICE DEPARTMENT/TECHNICAL ASSISTANCE: 310-537-3700 800-421-1244 800-478-1244 FAX: 310-537-3927 FAX: 310-631-5032 E-mail:mq@multiquip.com • www:multiquip.
HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING MULTIQUIP’S MAIN PHONE NUMBERS 800-421-1244 FAX: 310-537-3927 310-537-3700 PARTS DEPARTMENT 800-427-1244 FAX: 800-672-7877 310-537-3700 FAX: 310-637-3284 MAYCO PARTS 800-306-2926 FAX: 800-672-7877 310-537-3700 FAX: 310-637-3284 SERVICE DEPARTMENT 800-478-1244 FAX: 310-537-4259 310-537-3700 MQ POWER SERVICE DEPARTMENT 800-835-2551 FAX: 310-638-8046 310-537-3700 TECHNICAL ASSISTANCE 800-478-1244 FAX: 310-631-5032 WARRANTY DEPA
MC-42S CONCRETE MIXER — TABLE OF CONTENTS Multiquip MC-42S Concrete Mixer Here's How To Get Help ............................................ 3 Table Of Contents ..................................................... 4 Parts Ordering Procedures ....................................... 5 Specifications ............................................................ 6 Dimensions (Mixer) ................................................... 7 Safety Message Alert Symbols .................................
MC-42S CONCRETE MIXER — PARTS ORDERING PROCEDURES When ordering parts, please supply the following information: ❒ ❒ ❒ ❒ ❒ ❒ ❒ Dealer account number Dealer name and address Shipping address (if different than billing address) Return fax number Applicable model number Quantity, part number and description of each part Specify preferred method of shipment: ✓ FedEx or UPS Ground Note: Unless otherwise indicated by customer, all ✓ FedEx or UPS Second Day or Third Day orders are treated as “Standard Orders”, and
MC-42S CONCRETE MIXER — SPECIFICATIONS Table 1. Specifications (Engine/Electric Motor) Engine/Electric Motor Model HONDA GX120K1QX2 Baldor 34F324-5596 Type Air-cooled 4 stroke, Single Cylinder, OHV, Horizontal Shaft Gasoline Engine 1/2 HP, Single-phase 115 VAC, Electric Motor Bore X Stroke 2.7 in. X 1.7 in. (60 mm x 42 mm) N/A Displacement 7.3 cu. in. (119 cc) N/A Max Output 3.9 H.P./3,600 rpm 1/2 HP/1725 R.P.M. Fuel Tank Capacity 0.63 U.S. Gallons (0.
MC-42S CONCRETE MIXER — DIMENSIONS (MIXER) See Table 2 for mixer dimensions Figure 1A. Mixer Dimensions MC-42S CONCRETE MIXER — PARTS & OPERATION MANUAL — REV.
MC-42S CONCRETE MIXER — SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others. NOTE This Owner's Manual has been developed to provide complete instructions for the safe and efficient operation of the Multiquip Model MC-42S (Steel) Concrete Mixer.
MC-42S CONCRETE MIXER — RULES FOR SAFE OPERATION DANGER: Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the Multiquip MC-42S Concrete Mixer: GENERAL SAFETY ■ DO NOT operate or service this equipment before reading this entire manual.
MC-42S CONCRETE MIXER — RULES FOR SAFE OPERATION ■ NEVER run engine without air cleaner. Severe engine damage may occur. ■ ALWAYS read, understand, and follow procedures in Operator’s Manual before attempting to operate equipment. ■ ALWAYS be sure the operator is familiar with proper safety precautions and operations techniques before using roller. ■ ALWAYS store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children.
MC-42S CONCRETE MIXER — OPERATION AND SAFETY DECALS Machine Safety Decals The Multiquip MC-42S mixer is equipped with a number of safety decals (Figure 1A). These decals are provided for operator safety and maintenance information. The illustration below and on the next page shows these decals as they appear on the machine. Should any of these decals become unreadable, replacements can be obtained from your dealer. Figure 1A. MC-42S Mixer Decals MC-42S CONCRETE MIXER — PARTS & OPERATION MANUAL — REV.
MC-42S CONCRETE MIXER — GENERAL INFORMATION Ensure that the extension cable is carefully laid out avoiding wet areas, sharp edges and locations where vehicles might run over it. Avoid allowing the extension cable to be trapped underneath the mixer. Application This mixer is only intended for the production of concrete. The mixer must be used for its intended purpose and is not suitable for the mixing of flammable or explosive substances. The mixer must not be used in an explosive atmosphere.
MC-42S CONCRETE MIXER — MIXER BASIC COMPONENTS Figure 2. Mixer Major Components 1. Steel Mixing Drum — The Multiquip MC-42S uses a 4 cu. ft steel mixing drum. This drum is to be used for mixing of concrete. Always clean the drum after each use. DO NOT use this mixing drum for the mixing of volatile liquids. 8. Leaf Suspension — This mixer uses a leaf type suspension. Check the mounting hardware for bolt hole elongation and tightness. See maintenance section of this manual for recommended maintenance.
MC-42S CONCRETE MIXER — BASIC ENGINE COMPONENTS Honda GX Series Engine Shown Figure 3. Engine Controls and Components INITIAL SERVICING 5. The engine (Figure 3) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers Engine manual for instructions & details of operation and servicing. Fuel Valve Lever – OPEN to let fuel flow, CLOSE to stop the flow of fuel. 6. Choke Lever – Used in the starting of a cold engine, or in cold weather conditions.
MC-42S CONCRETE MIXER — HANDWHEEL ASSEMBLY Assembly The Multiquip MC-42S concrete mixer is shipped with the handwheel detached. Attach the handwheel to the mixer as shown in Figure 4. Figure 4. Handwheel Assembly MC-42S CONCRETE MIXER — PARTS & OPERATION MANUAL — REV.
MC-42S CONCRETE MIXER — TOWING GUIDELINES Towing Safety Precautions CAUTION: ■ Check with your county or state safety towing regulations department before towing your mixer. ■ Check wheel mounting lug nuts with a torque wrench. Torque wheel lug nuts as described in the maintenance section of this manual. ■ Check tightness of U-clamp nuts, torque suspension hardware as referenced in the maintenance section of this manual. ■ Avoid sudden stops and starts. This can cause skidding, or jackknifing.
MC-42S CONCRETE MIXER — SAFETY CHAIN CONNECTION CAUTION: NEVER ! tow the mixer with the safety chain removed. The safety chain is intended to prevent complete separation of the mixer from the towing vehicle in the event of a tow bar failure. Reference Figure 5 for the installation of the Saftey Chain. Tow Bar to Mixer Connection 1. Insert the tow bar through the round opening at the bottom of the mixer stand.
MC-42S CONCRETE MIXER — ELECTRIC MOTOR Electric Motor For maintenance care and operation of the electric motor, refer to your electric motor instruction booklet furnished with the electric motor. Protect the electric motor from dust as much as possible and keep ventilating openings clean. CAUTION: ■ DO NOT spray water at any time on the electric motor. Table 5. Recommended Extension Cord Sizes Electric Motor Input Voltage 50 ft. (15.24 m) 75 ft. (22.86 m) 100 ft. (30.48 m) 200 ft. (60.
MC-42S CONCRETE MIXER — ELECTRIC MOTOR Figure 6. Single Phase Electric Motor with 12 inch Pigtail Cable MC-42S CONCRETE MIXER — PARTS & OPERATION MANUAL — REV.
MC-42S CONCRETE MIXER — PRE-INSPECTION (GAS ENGINE) Before Starting 1. Read safety instructions at the beginning of manual. 2. Clean the mixer, removing dirt and dust, particularly the engine cooling air inlet, carburetor and air cleaner. 3. Check the air filter for dirt and dust. If air filter is dirty, replace air filter with a new one as required. 4. Check carburetor for external dirt and dust. Clean with dry compressed air. Table 6.
MC-42S CONCRETE MIXER — INITIAL START-UP (GAS ENGINE) Starting the Engine (Gasoline Only) The following steps outline the procedure for starting the engine. Depending on the type of engine employed in the mixer the steps may vary slightly. If your mixer has an electric motor disregard this section. 1. 4. Turn the engine switch (Figure 12) to the ON position. Move the fuel shut-off lever (Figure 9) to the ON position. Figure 12. Engine ON/OFF Switch 5.
MC-42S CONCRETE MIXER — INITIAL START-UP (ELECT. MOTOR) Initial Start-up Instructions (Electric Motor) Starting CAUTION: DO NOT attempt to operate the mixer until the Safety, General Information and Inspection sections have been read and understood. 5. Plug the other end of the extension cord into a 120 VAC G.F.C.I. protected receptacle. Remember the power requirements for this electric motor is 120 VAC, 60 Hz. The use of any other input voltage will severely damage the motor.
MC-42S CONCRETE MIXER — OPERATION Operation 1. To position the tub, make sure the mixer is placed on firm level ground, then pull up on the dump latch (Figure 18) and turn the hand wheel until the tub is at the desired position. Once the tub is at the desired position, pull down on the dump latch to lock the tub in position. 3. Placing the shovel all the way inside the drum (Figure 20) will cause the shovel to strike the blades.
MC-42S CONCRETE MIXER — MAINTENANCE (ENGINE) Use Table 7 as a general maintenance guideline when servicing your engine. For more detail engine maintenance information, refer to the engine owner's manual supplied with your engine. Table 7. Engine Maintenance Schedule DESCRIPTION (3) OPERATION BEFORE CHECK X FIRST EVERY MONTH 3 MONTHS OR OR 10 HRS. 2 5 HRS . EVERY 6 MONTHS OR 5 0 HRS . EVERY Y E AR OR 100 HRS. EVERY 2 YEARS OR 200 HRS.
MC-42S CONCRETE MIXER — MAINTENANCE (ENGINE) Maintenance Perform the scheduled maintenance procedures as defined by Table 6 and below: DAILY ■ Thoroughly remove dirt and oil from the engine and control area. Clean or replace the air cleaner elements as necessary. Check and retighten all fasteners as necessary. Check the gearbox for oil leaks. Repair or replace as needed. WEEKLY ■ Remove the fuel filter cap and clean the inside of the fuel tank. ■ Remove or clean the filter at the bottom of the tank.
MC-42S CONCRETE MIXER — MAINTENANCE (MIXER) Ball Socket and Clamp Face Maintenance 1. 2. 3. If the towing vechicle is equipped with a ball socket, smear socket periodically with multi-purpose grease. This will keep the ball socket well lubricated. Periodically oil pivot points and clamp face surfaces of coupler with SAE 30 WT. motor oil. When parking or storing your mixer. Keep the coupler off the ground so dirt will not build up in the ball socket. 2.
MC-42S CONCRETE MIXER — MAINTENANCE (MIXER) Tires/Wheels/Lug Nuts Tires and wheels are a very important and critical components of the trailer. When specifying or replacing the trailer wheels it is important the wheels, tires, and axle are properly matched. CAUTION: DO NOT attempt to repair or modify a wheel. DO NOT install an inter-tube to correct a leak through the rim.
MC-42S CONCRETE MIXER — MAINTENANCE (MIXER) Lug Nut Torque Requirements It is extremely important to apply and maintain proper wheel mounting torque on the trailer. Be sure to use only the fasteners matched to the cone angle of the wheel. Proper procedure for attachment of the wheels is as follows: 1. Start all wheel lug nuts by hand. 2. Torque all lug nuts in sequence. See Figure 30. DO NOT torque the wheel lug nuts all the way down.Tighten each lug nut in 3 separate passes as defined by Table 10. 3.
NOTE PAGE MC-42S CONCRETE MIXER — PARTS & OPERATION MANUAL — REV.
MC-42S CONCRETE MIXER — TROUBLESHOOTING (ENGINE) Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take a remedial action following the diagnosis based on the Troubleshooting (Tables 9 and 10) information shown below and on the next page. If the problem cannot be remedied, please leave the unit just as it is and consult our company's business office or service plant. TABLE 9.
MC-42S CONCRETE MIXER — TROUBLESHOOTING (ENG./MIXER) TABLE 9. ENGINE TROUBLESHOOTING (Continued) SYMPTOM POSSIBLE PROBLEM SOLUTION Operation not satisfactory Rotational speed fluctuates. Recoil starter not working properly. Governor adjustment improper? Adjust governor to correct lever. Governor spring defective? Clean or replace ignition. Fuel flow erratic? Check fuel line. Air taken in through suction line? Check suction line. Dust in rotating part? Clean recoil starter assembly.
EXPLANATION OF CODE IN REMARKS COLUMN How to read the marks and remarks used in this parts book. NOTE The contents of this parts catalog are subject to change without notice. Items Found In the “Remarks” Column Serial Numbers-Where indicated, this indicates a serial number range (inclusive) where a particular part is used. Model Number-Where indicated, this shows that the corresponding part is utilized only with this specific model number or model number variant.
MC-42S CONCRETE MIXER — SUGGESTED SPARE PARTS MC-42S CONCRETE MIXER 1 TO 4 UNITS WITH HONDA GX120K1QX2 Qty. P/N Description 2 ....... 491115 ................ V-BELT 1 ....... EM940734 ........... STOP BUTTON w/GAS ENGINE 2 ....... 491010 ................ LATCH SET 1 ....... 505390 ................ EXPANSION PLUG 2 ....... EM903026 ........... SPINDLE BEARING CUP 2 ....... EM903063 ........... SPINDLE BEARING CONES 1 ....... EM505472 ........... SPACER, DRUM 2 ....... 492179 ................
MC-42S CONCRETE MIXER — NAME PLATE AND DECALS NAME PLATE AND DECALS PAGE 34 — MC-42S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV.
MC-42S CONCRETE MIXER— NAME PLATE AND DECALS NAME PLATE AND DECALS NO 1 2 3 4 5 6 7 PART NO 18252 CIPDCL160 504713 EM948630 DCL151 13118 PART NAME QTY. REMARKS DECAL, MQ MULTIQUIP LOGO 3 DECAL, CRUSH WARNING 2 DECAL, SAFETY INSTRUCTIONS 1 DECAL, EMERGENCY STOP 1 DECAL, TOWING INSTRUCTIONS 1 DECAL, POWDER COATED 1 NAMEPLATE ........................................................ 1 ......... CONTACT MQPARTS DEPT. SEE OPERATION AND SAFETY DECALS PAGE.
MC-42S — STEEL BARREL STEEL BARREL ASSY. PAGE 36 — MC-42S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV.
MC-42S — STEEL BARREL STEEL BARREL ASSY. NO 1 2 3 4 5 6 7 8 8 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 PART NO 500904 501867 EM903054 EM903017 502427 EM963610 502449 511732 511731 511730 EM969013 490956 502019 493296 EM963692 492584 502018 491008 EM916001 500214 501917 492467 EM505472 492483 500601 EM963102 492584 502016 491685 500601 501269 PART NAME QTY. REMARK CAP 1 KING PIN 1 SPINDLE BEARING 5/8" CONE ............ 2 ............. REPLACES 492154 SPINDLE BEARING CUP .............
MC-42S — MAIN FRAME ASSEMBLY MAIN FRAME ASSY. PAGE 38 — MC-42S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV.
MC-42S — MAIN FRAME ASSEMBLY MAIN FRAME ASSY. NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 * 19 * 20 21 22 23 24 PART NO 501844 2101402 492284 502017 EM969013 490896 EM963610 EM916001 491008 EM963055 492621 495595 502448 10176 EM124 500596 501902 01004 490958 13363KIT HBC-1 HLC-1 HPC-1 PART NAME QTY. REMARK GUARD, GEAR WHEEL 1 WASHER, LOCK 1/4" 4 ROUND HEAD BOLT 1/4" NC 3/8 G2" ......... 4..............
MC-42S — AXLE ASSEMBLY AXLE ASSY. PAGE 40 — MC-42S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV.
MC-42S — AXLE ASSEMBLY AXLE ASSY. NO 1 2 3 # * 4 * 4# 5 # * 6 PART NO EM969023 4922406 EM914288 EM903049 EM903113 EM903012 3504 6 7 8 9 10 10 11 11 12 # * 13 # * 14 14 EM941306 EM511159 EM501299 491688 12426 8164 3005 493236C 8115 3469 501960 511335 PART NAME QTY. REMARK LOCK NUT 5/8" NC 4 BOLT 5/8" NC 1-1/2" G5 4 OIL SEAL 2 BEARING CONE, (7/8" SPINDLE) 4 BEARING CONE, (1-1/16" SPINDLE) 4 BEARING CUP 4 HUB ASSY., 4-BOLT (7/8" SPINDLE) ............................. 2 ........... INCLUDES ITEMS W/ * .....
MC-42S — CABINET ASSEMBLY CABINET ASSY. PAGE 42 — MC-42S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV.
MC-42S — CABINET ASSEMBLY CABINET ASSY. NO 1 2 3 4 5 6 7 8 * 9 10 11 PART NO 490202 501954 492363 EM923023 13287 2203 1307 491010 EM923343 2105164 EM947007 PART NAME QTY. REMARKS RUBBER PROTECTOR 4 ENGINE HOUSING CABINET, W/DECALS ............. 1 ............ INCLUDES ITEM W/ * BOLT 5/16" NC X 3/4" G5 4 WASHER, FLAT 5/16" 8 LOCK NUT 8-32 ....................................................... 6 ............ REPLACEMENT PART ONLY WASHER, FLAT #10 ................................................ 6 .........
MC-42S — GAS ENGINE MOUNTING PLATE ASSEMBLY GAS ENGINE MOUNTING PLATE ASSY. PAGE 44 — MC-42S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV.
MC-42S — GAS ENGINE MOUNTING PLATE ASSEMBLY GAS ENGINE MOUNTING PLATE ASSY. NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 PART NO GX120K1QX2 490956 500246 EM961045 492066 501019 491115 492467 492065 EM923343 EM923023 2105164 502023 492600 EM963692 29174-001 EM940734 503600 492584 492367 PART NAME QTY. REMARKS ENGINE, HONDA 4.0 HP 1 RING, RETAINING 1 SQUARE KEY 1 SET SCREW 5/16" NC X 3/4" 1 UPPER PULLEY 1 SQUARE KEY 3/16" X 45 MM 1 V-BELT A-46 1 ALLEN SCREW 5/16" NC X 3/8" 1 DRIVE PULLEY 4.
MC-42S — ELECTRIC MOTOR MOUNTING PLATE ASSEMBLY ELECTRIC MOTOR MOUNTING PLATE ASSY. PAGE 46 — MC-42S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV.
MC-42S — ELECTRIC MOTOR MOUNTING PLATE ASSEMBLY ELECTRIC MOTOR MOUNTING PLATE ASSY. NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 PART NO 34F3245596 490956 500246 EM961045 492066 501019 491115 492467 492067 EM923343 EM923023 2105164 502023 492600 EM963692 492584 492367 PART NAME MOTOR, ELECTRIC .
HONDA GX120K1QX2 — AIR CLEANER ASSY. AIR CLEANER ASSY. PAGE 48 — MC-42S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV.
HONDA GX120K1QX2 — AIR CLEANER ASSY. AIR CLEANER ASSY. NO. 1 2 3 * 4 5 * 7# 8# 9 12 13 14 PART NO. 16271ZE1000 17210ZE0505 17218ZE0505 17230ZE0820 17232891000 17238ZE0010 17239ZE1000 17410ZE0030 90325044000 957010602000 9405006000 PART NAME QTY. REMARKS GASKET, ELBOW 1 ELEMENT, AIR CLEANER (DUAL) ................... 1............. INCLUDES ITEMS W/ * FILTER, OUTER 1 COVER, AIR CLEANER (DUAL) 1 GROMMET, AIR CLEANER 1 COLLAR, AIR CLEANER 2 COLLAR B, AIR CLEANER 1 ELBOW, AIR CLEANER .........................
HONDA GX120K1QX2 — CAMSHAFT ASSY. CAMSHAFT ASSY. PAGE 50 — MC-42S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV.
HONDA GX120K1QX2 — CAMSHAFT ASSY. CAMSHAFT ASSY. NO. 1 2 3 4 5 6 * 7 8 9 10 11 12 13 14 15 PART NO. 14100ZE0812 14410ZE0010 14431ZE1000 14441ZE1010 14451ZE1013 14568ZE1000 14711ZF0010 14721ZF0000 14751ZF1000 14771ZE1000 14773ZE1000 14781ZE1000 14791ZE0010 90012ZE0010 90206ZE1000 PART NAME QTY. REMARKS CAMSHAFT ASSEMBLY .................................. 1............. INCLUDES ITEMS W/ * ROD, PUSH 2 ARM, VALVE ROCKER 2 LIFTER, VALVE 2 PIVOT, ROCKER ARM 2 SPRING, WEIGHT RETURN 1 VALVE, IN. 1 VALVE, EX.
HONDA GX120K1QX2 — CARBURETOR ASSY. CARBURETOR ASSY. PAGE 52 — MC-42S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV.
HONDA GX120K1QX2 — CARBURETOR ASSY. CARBURETOR ASSY. NO. 1 * 2 * 3 * 4 * 5 * 6 * 7 * 8 * 9 10 * 11 * 12 * 13 14 15 16 17 18 * 19 * 20 * 21 * 22 * 23 * 24# 25 25 25 * 26 * PART NO.
HONDA GX120K1QX2 — CONTROL ASSY. CONTROL ASSY. PAGE 54 — MC-42S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV.
HONDA GX120K1QX2 — CONTROL ASSY. CONTROL ASSY. NO. 3 4 5 6 7 8# 9# 10# 11# 12# 14# 15# 16# 18 19 20 21# 24# 25# 26 PART NO. 16500ZH7820 16551ZE0010 16555ZE0000 16561ZE0020 16562ZE0020 16571ZH7000 16574ZE1000 16575ZH8000 16576891000 16578ZE1000 16580ZH7810 16584883300 16592ZE1810 90013883000 90015ZE5010 90022888010 90114SA0000 93500050250H 0202005T125 9405006000 PART NAME QTY. REMARKS CONTROL ASSEMBLY (REMOTE) ........... 1 ............
HONDA GX120K1QX2 — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. PAGE 56 — MC-42S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV.
HONDA GX120K1QX2 — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. NO. 1 2 3 4 7# 9 10 * 11 * 12 PART NO. 11300ZE0640 11381ZH7800 15600ZE1003 15600ZG4003 15625ZE1003 90015883000 91001878003 91203ZE0013 9430108140 PART NAME QTY. REMARKS COVER ASSEMBLY, CRANKCASE (W- TYPE) ....... 1 .............. INCLUDES ITEMS W/ * GASKET, CASE COVER 1 CAP ASSEMBLY, OIL FILLER ................................ 1 .............. INCLUDES ITEMS W/# CAP ASSEMBLY, OIL FILLER ................................ 1 ..............
HONDA GX120K1QX2 — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PAGE 58 — MC-42S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV.
HONDA GX120K1QX2 — CRANKSHAFT ASSY. CRANKSHAFT ASSY. NO. 1 2 PART NO. 13310ZE0601 90745ZE1600 PART NAME CRANKSHAFT, H-TYPE KEY 4.78 X4.78X38 QTY. 1 1 REMARKS MC-42S CONCRETE MIXER — PARTS & OPERATION MANUAL — REV.
HONDA GX120K1QX2 — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. PAGE 60 — MC-42S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV.
HONDA GX120K1QX2 — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. NO. 2 3 4 5# 6# 7# 8 9 10 11 12 13 14 * 15 * 16 17 18 19 20 PART NO. 120A0ZH7810 15510ZE1033 16510ZE1000 16511ZE1000 16512ZE1000 16513ZE1000 16531ZE1000 16541ZE1000 90131ZE1000 90451ZE1000 90601ZE1000 90602ZE1000 91001878003 91202ZE6003 91353671003 9405010000 58176 9425108000 957010601200 PART NAME QTY. REMARKS CYLINDER ASSEMBLY (OIL ALERT) ........1 ............ INCLUDES ITEMS W/ * SWITCH ASSEMBLY, OIL LEVEL 1 GOVERNOR ASSEMBLY ..............
HONDA GX120K1QX2 — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 62 — MC-42S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV.
HONDA GX120K1QX2 — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. NO. 1 2 * 3 * 4 + * 5 6 7 8 9 10 11 12 14 15 PART NO. 12210ZH7000 12204ZE1306 12205ZE1315 12216ZE5300 12251ZH7800 12310ZE1020 12391ZE1000 15721ZH8000 90013883000 90043ZE1020 90047ZE1000 9430110160 957230805500 9807955846 PART NAME QTY. REMARKS CYLINDER HEAD .................................................. 1 .............. INCLUDES ITEMS W/ * GUIDE, VALVE (OS) OPTIONAL 1 GUIDE, EX. VALVE (OS) OPTIONAL ................... 1 ..............
HONDA GX120K1QX2 — FAN COVER ASSY. FAN COVER ASSY. PAGE 64 — MC-42S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV.
HONDA GX120K1QX2 — FAN COVER ASSY. FAN COVER ASSY. NO. 1 2 3 4 5 6 7 7 8 9 10 11 13 PART NO.
HONDA GX120K1QX2 — FLYWHEEL ASSY. FLYWHEEL ASSY. PAGE 66 — MC-42S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV.
HONDA GX120K1QX2 — FLYWHEEL ASSY. FLYWHEEL ASSY. NO. 1 2 4 5 7 PART NO. 13331357000 19511ZE0000 28451ZH8003 31100ZE0010 90201878003 PART NAME KEY, SPECIAL WOODRUFF 25X18 FAN, COOLING PULLEY, STARTER FLYWHEEL NUT, SPECIAL 14MM QTY. 1 1 1 1 1 REMARKS MC-42S CONCRETE MIXER — PARTS & OPERATION MANUAL — REV.
HONDA GX120K1QX2 — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 68 — MC-42S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV.
HONDA GX120K1QX2 — FUEL TANK ASSY. FUEL TANK ASSY. NO. 1 2 3 5 6 * 11 12 13 14 15 PART NO. 16854ZH8000 16955ZE1000 17510ZE0020ZD 17620ZH7023 17631ZH7003 91353671003 9405006000 950014500360M 9500202080 90004ZH7003 PART NAME QTY. REMARKS RUBBER, SUPPORTER 107MM 1 JOINT, FUEL TANK 1 TANK, FUEL *NH1* (BLACK) 1 CAP, FUEL FILLER ..................................... 1 .......... INCLUDES ITEMS W/ * GASKET, FUEL FILLER CAP 1 O- RING 13.5X1.5 (ARAI) 1 NUT, FLANGE 6MM 2 BULK HOSE, FUEL (4.5X3000) (4.
HONDA GX120K1QX2 — IGNITION COIL ASSY. IGNITION COIL ASSY. PAGE 70 — MC-42S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV.
HONDA GX120K1QX2 — IGNITION COIL ASSY. IGNITION COIL ASSY. NO. 1 2 8 PART NO. 30500ZE1043 30700ZE1013 957010602500 PART NAME COIL ASSEMBLY, IGNITION CAP ASSEMBLY, NOISE SUPPRESSOR BOLT, FLANGE 6X25 QTY. 1 1 2 REMARKS MC-42S CONCRETE MIXER — PARTS & OPERATION MANUAL — REV.
HONDA GX120K1QX2 — MUFFLER ASSY. MUFFLER ASSY. PAGE 72 — MC-42S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV.
HONDA GX120K1QX2 — MUFFLER ASSY. MUFFLER ASSY. NO. 1 3 7 10 13 PART NO. 18310ZF1000 18320ZF1H01 18381ZH8800 90050ZE1000 020108060 PART NAME MUFFLER PROTECTOR, MUFFLER GASKET, MUFFLER SCREW, TAPPING 5X8 NUT, HEX. 8MM QTY. 1 1 1 4 2 REMARKS MC-42S CONCRETE MIXER — PARTS & OPERATION MANUAL — REV.
HONDA GX120K1QX2 — PISTON ASSY. PISTON ASSY. PAGE 74 — MC-42S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV.
HONDA GX120K1QX2 — PISTON ASSY. PISTON ASSY. NO. 1 1 1 1 2 2 2 2 3 4 4 5 * 6 PART NO. 13010ZK7V02 13011ZE6013 13012ZK7V01 13013ZK7V01 13101ZH7000 13102ZH7000 13103ZH7000 13104ZH7000 13111ZE0000 132A0ZE0000 13200ZE0000 90001ZE1000 90551ZE0000 PART NAME QTY. REMARKS RING SET, PISTON (STANDARD) 1 RING SET, PISTON (OS 0.25), OPTIONAL 1 RING SET, PISTON (OS 0.50) , OPTIONAL 1 RING SET, PISTON (OS 0.75), OPTIONAL 1 PISTON, STANDARD 1 PISTON, OS 0.25 1 PISTON, OS 0.50 1 PISTON, 0.
HONDA GX120K1QX2 — RECOIL STARTER ASSY. RECOIL STARTER ASSY. PAGE 76 — MC-42S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV.
HONDA GX120K1QX2 — RECOIL STARTER ASSY. RECOIL STARTER ASSY. NO. 1 2 * 3 * 4 * 5 * 6 * 7 * 8 * 9 * 10 * 11 * 12 PART NO. 28400ZH8013ZB 28410ZH8003ZB 28420ZH8013 28422ZH8013 28433ZH8003 28441ZH8003 28442ZH8003 28443ZH8003 28461ZH8003 28462ZH8003 90003ZH8003 9008ZE2003 PART NAME QTY. REMARKS STARTER ASSY., RECOIL *NH1* (BLACK) .......... 1 ..............
HONDA GX120K1QX2 ENGINE — GASKET KIT ASSY. NO ARTWORK AVALIBLE PAGE 78 — MC-42S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV.
HONDA GX120K1QX2 ENGINE — GASKET KIT ASSY. GASKET KIT ASSY. NO. 2 3 * 4 * 5 * 6 * 7 * 8 * PART NO. 06111ZH7405 11381ZH7800 12251ZH7800 12391ZE1000 16212ZH7800 16221ZH8801 18381ZH8800 PART NAME QTY. REMARKS GASKET KIT ......................................................... 1 .............. INCLUDES ITEMS W/ * GASKET, CASE COVER 1 GASKET, CYLINDER HEAD 1 GASKET, CYLINDER HEAD COVER 1 GASKET, INSULATOR 1 GASKET, CARBURETOR 1 GASKET, MUFFLER 1 MC-42S CONCRETE MIXER — PARTS & OPERATION MANUAL — REV.
HONDA GX120K1QX2 — ENGINE LABELS ASSY. ENGINE LABELS ASSY. PAGE 80 — MC-42S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV.
HONDA GX120K1QX2 — ENGINE LABELS ASSY. LABELS ASSY. NO. 1 3 4 6 PART NO. 87521ZH7020 87522zH9000 87528ZE1810 87532ZH8810 PART NAME RING SET, PISTON (STANDARD) LABEL CAUTION MARK CHOKE MARK, OIL ALERT QTY. 1 1 1 1 REMARKS MC-42S CONCRETE MIXER — PARTS & OPERATION MANUAL — REV.
TERMS AND CONDITIONS OF SALE — PARTS Effective: October 1, 2002 PAYMENT TERMS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Terms of payment for parts are net 10 days. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments are F.O.B. point of origin.
NOTE PAGE MC-42S CONCRETE MIXER — PARTS & OPERATION MANUAL — REV.
OPERATION AND PARTS MANUAL HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING MULTIQUIP’S MAIN PHONE NUMBERS 800-421-1244 FAX: 310-537-3927 310-537-3700 PARTS DEPARTMENT 800-427-1244 FAX: 800-672-7877 310-537-3700 FAX: 310-637-3284 MAYCO PARTS 800-306-2926 FAX: 800-672-7877 310-537-3700 FAX: 310-637-3284 SERVICE DEPARTMENT 800-478-1244 FAX: 310-537-4259 310-537-3700 MQ POWER SERVICE DEPARTMENT 800-835-2551 FAX: 310-638-8046 310-537-3700 TECHNICAL ASSISTANCE 800-478-1244 FAX