OPERATION AND PARTS MANUAL SERIES MODELS MVH-306D (RECOIL START) MVH-306DS (ELECTRIC START) REVERSIBLE PLATE COMPACTOR (YANMAR L-70EE DIESEL ENGINE) Revision #11 (04/04/14) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
PROPOSITION 65 WARNING Diesel engine exhaust and some of PAGE 2 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
NOTES MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
TABLE OF CONTENTS MIKASA MVH-306D/DSREVERSIBLE PLATE COMPACTOR Proposition 65 Warning ..............................................2 Table Of Contents ......................................................4 Parts Ordering Procedures ........................................5 Safety information ................................................ 8-10 Specifications ...........................................................11 Dimensions ..............................................................
www.multiquip.com PARTS ORDERING PROCEDURES Ordering parts has never been easier! Choose from three easy options: Order via Internet (Dealers Only): Best Deal! Effective: January 1st, 2006 If you have an MQ Account, to obtain a Username and Password, E-mail us at: parts@multiquip. com. Order parts on-line using Multiquip’s SmartEquip website! ■ View Parts Diagrams ■ Order Parts ■ Print Specification Information To obtain an MQ Account, contact your District Sales Manager for more information.
SAFETY INFORMATION Do not operate or service the equipment before reading the entire manual. Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the safety messages and operating instructions could result in injury to yourself and others. Potential hazards associated with the operation of this equipment will be referenced with hazard symbols which may appear throughout this manual in conjunction with safety messages.
SAFETY INFORMATION GENERAL SAFETY CAUTION NEVER operate this equipment without proper protective clothing, shatterproof glasses, respiratory protection, hearing protection, steel-toed boots and other protective devices required by the job or city and state regulations. NEVER operate this equipment when not feeling well due to fatigue, illness or when under medication. NEVER operate this equipment under the influence of drugs or alcohol.
SAFETY INFORMATION COMPACTOR SAFETY DANGER NEVER operate the equipment in an explosive atmosphere or near combustible materials. An explosion or fire could result causing severe bodily harm or even death. WARNING NEVER disconnect any emergency or safety devices. These devices are intended for operator safety. Disconnection of these devices can cause severe injury, bodily harm or even death. Disconnection of any of these devices will void all warranties.
SAFETY INFORMATION FUEL SAFETY BATTERY SAFETY (ELECTRIC START ONLY) DANGER DANGER DO NOT add fuel to equipment if it is placed inside truck bed with plastic liner. Possibility exists of explosion or fire due to static electricity. FUEL DO NOT drop the battery. There is a possibility that the battery will explode. DO NOT expose the battery to open flames, sparks, cigarettes, etc. The battery contains combustible gases and liquids.
SAFETY INFORMATION TRANSPORTING SAFETY CAUTION NEVER allow any person or animal to stand underneath the equipment while lifting. NOTICE Before lifting, make sure that the equipment parts (hook and vibration insulator) are not damaged and screws are not loose or missing. Always make sure crane or lifitng device has been properly secured to the lifting bail (hook) of the equipment. ALWAYS shutdown engine before transporting. NEVER lift the equipment while the engine is running.
SPECIFICATIONS Table 1. MVH-306D/DS Reversible Plate Compactor Specifications Centrifugal Force 10,125 lbs. (4,593 kg) Vibration Frequency 4,400 vpm (70 Hz) Traveling Speed 0 to 75 ft/min (0 to 23 m/min) Plate Size (L x W) 18 x 34 in (45.72 x 86.36 cm) External Plate Size (L x W) 24 x 34 in (60.96 x 86.36 cm) Max. Area of Compaction (no extensions) 6,750 sq. ft. (2,057 sq. meters) Overall Length 61.8 in (1570 mm) Overall Width 18.0 in (457 mm ) Overall Height (with handle) 44.
DIMENSIONS Figure 3. MVH-306D/DS Reversible Plate Compactor Dimensions TABLE 3. DIMENSIONS REF. DIMENSIONS A 53 in. (134.6 cm.) B 18 in. (46 cm.) C 34 in. (86 cm.) D 63.8 in. (162 cm.) E 32.5 in. (82.5 cm.) PAGE 12 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
GENERAL INFORMATION Plate Compactor Frequency/Speed The Mikasa MVH-306D/DS is a walk behind, reversible plate compactor designed for the compaction of sand, clay and asphalt. This plate compactor is a powerful compacting tool capable of applying a tremendous force in consecutive high frequency vibrations to a soil surface. Its applications include soil compacting for road, embankments and reservoirs as well as backfilling for gas pipelines, water pipelines and cable installation work.
COMPONENTS Figure 4. MVH-306D/DS Reversible Plate Compactor Components Figure 4 illustrates the location of the major components for the MVH-306D/DS Reversible Plate Compactor. The function of each component is described below: 8. Belt Cover – Remove this cover to gain access to the Vbelts. NEVER run the compactor without the V-belt cover. If the V-belt cover is not installed, the possibility exist that your hand may get caught between the V-belt and clutch, thus causing serious injury and bodily harm.
BASIC ENGINE Figure 5. MVH-306D/DS Engine Components ENGINE COMPONENTS Figure 5 illustrates the location of the major lever components of the machine. Each component is described below: 6. Recoil Starter– Manual-starting method. Pull the starter grip until resistance is felt, then pull briskly and smoothly. 1. Fuel Filler Cap – Remove this cap to add unleaded gasoline to the fuel tank. Make sure cap is tighten securely. DO NOT over fill. 7.
INSPECTION CAUTION NEVER operate the compactor in a confined area or enclosed area structure that does not provide ample free flow of air. 4. If the oil level is low (Figure 7), fill to the edge of the oil filler hole with the recommended oil type (Table 4). Maximum oil capacity is 1.16 quarts (1.10 liters). CAUTION ALWAYS wear approved eye and hearing protection before operating the compactor. Before Starting 1. Read safety instructions at the beginning of manual. 2.
INSPECTION CAUTION DO NOT overfill hydraulic oil tank. This could cause oil leaks and sluggish operation. Clean cap and surrounding area before opening to prevent dirt from entering oil tank. 5. When adding hydraulic oil, only fill to the specified oil level as marked on the front of the hydraulic oil tank (Figure 9). DO NOT overfill DANGER EXPLOSIVE FUEL! Motor fuels are highly flammable and can be dangerous if mishandled. DO NOT smoke while refueling.
OPERATION CAUTION DO NOT attempt to operate the compactor until the Safety, General Information and Inspection sections of this manual have been read and thoroughly understood. Releasing the Handle 1. Pull the handle release pin, (Figure 13) then push down on the hand grip to release the handle. Figure 14. Handle Adjustment STARTING THE ENGINE Electric Start (Option) 1. Open the fuel cock (Figure 15). Figure 15. Open Fuel Cock 2. Place the throttle lever (Figure 16) in the START position (center).
OPERATION 5. If the engine fails to start, DO NOT continue to rotate the ignition key for more than 5 seconds. Return the key to the RUN position and wait 10 seconds before starting again Figure 18. Engine Start Handle 4. Figure 17. Starter Switch (Option) Push down decompression lever (Figure 19) and release. CAUTION While the engine is running, never try to turn the ignition key to the START position. 6.
OPERATION NOTICE ALWAYS move the throttle lever quickly without hesitation, because increasing the engine speed slowly causes the clutch to slip. 3. To make the compactor move in the forward direction push the travel lever ( Figure 21) forward. Figure 22. Throttle Lever (Stop) Figure 23. Starter Switch (STOP) Figure 21. Travel Lever 4. To make the compactor move in the reverse direction pull the travel lever ( Figure 21) backwards. 5.
MAINTENANCE NOTICE CAUTION Fuel piping and connections should be replaced every 2 years. Inspection and other services should always be carried out on hard and level ground with the engine shutdown. TABLE 6. MVH-306D/DS ENGINE CHECK Inspection and Maintenance Service Tables. 1. To make sure your plate compactor is always in good working condition before using, carry out the maintenance inspection in accordance with Tables 5 through 7. TABLE 5.
MAINTENANCE Engine Oil Replacement: 1. Replace engine oil, in first 25 hours of operation and every 50 to 100 hours afterwards. 2. Oil may be drained more easily when it is warm after operation (For more details, see separate engine Owner's Manual). Air Filter (Every 6 Months or 400 Hours) 1. The air filter element should be cleaned because a clogged air cleaner can cause poor engine starting, lack of power and shorten engine life substantially. Figure 25. Engine Air Filter and Element 2.
MAINTENANCE Vibrator Oil Level Check 2. Push the travel lever back and forth to drain the hydraulic oil from the hand pump (hydraulic oil reservoir). NOTICE Always clean the area around the vibrator oil level check plug before removing oil check plug. This will prevent dirt and debris from entering the system. 1. In every 100 hours of operation, with the machine positioned horizontally, use a 3/4” (19 mm) wrench and remove vibrator oil level check plug (Figure 28).
MAINTENANCE CAUTION Make sure hydraulic oil is at a normal safe operating level. DO NOT over fill. Over filling (excessive oil) will cause excess oil to blow out of breather plug. 3. Loosen bleeder plug located at top of hydraulic cylinder on side of vibrator (Figure 32). Air remaining in the circuit will be forced out of the bleeder plug. Once all air has been purged from the hydraulic system, tighten bleeder plug securely 4. Re-insert oil plug into hydraulic oil tank and tighten securely.
MAINTENANCE Battery fluid will be lost through continuous charging and LONG TERM STORAGE discharging. When storing your compactor for long periods do the following: Discontinue charging if the electrolyte temperature exceeds Run the engine at idle spped for 3-5 minutes. 117° F (45° C) Stop the engine. Drain the engine crankcase oil while the engine is still warm. Fill Engine crankcase with fresh oil. NOTICE Remove the rubber plug (Figure 36) on the rocker arm cover and add about 2 cc of lube oil.
TROUBLESHOOTING Practically all breakdowns can be prevented by proper diagnosis based on the Engine Troubleshooting (Table 8) handling and maintenance inspections, but in the event of a information shown below. If the problem cannot be remedied, please leave the unit just as it is and consult our company's breakdown, please take a remedial action following the business office or service plant. TABLE 8.
TROUBLESHOOTING Practically all breakdowns can be prevented by proper diagnosis based on the Compactor Troubleshooting (Table 9) handling and maintenance inspections, but in the event of a information shown below. If the problem cannot be remedied, please leave the unit just as it is and consult our company's breakdown, please take a remedial action following the business office or service plant. TABLE 9. TROUBLESHOOTING COMPACTOR SYMPTOM Travel speed low and vibration weak.
EXPLANATION OF CODE IN REMARKS COLUMN The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. NOTICE The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availability of the parts listed. SAMPLE PARTS LIST NO. 1 2% 2% 3 4 PART NO. PART NAME QTY. REMARKS 12345 BOLT......................1 .....
SUGGESTED SPARE PARTS MVH-306 W/YANMAR L-70EE DIESEL ENGINE 1 to 3 Units Qty. ..... P/N ......................... Description 1 ......... 956100054 .............. THROTTLE WIRE 2 ......... 070200373 .............. V-BELT 3 ......... 11425012580 .......... ELEMENT W/ PRE-FILTER 1 ......... 16081076630 .......... STARTER ROPE 2 ......... 11425055121 .......... FUEL FILTER W/GASKET 1 ......... 11428855010 .......... CAP, FUEL TANK W/GASKET 1 ......... 11425035110 .......... LUBE OIL STRAINER 1 .........
NAMEPLATE AND DECALS NAMEPLATE AND DECALS 5 Shell Tellus Oil 46 NPA-748 J STOP 12 RUN 13 START OPERATIONAL CAUTION Do not move travel lever if engine stops 6 8 NPA-1106 10 11 V BELT HDPF-5370 NPA-537 J 4 0PERATIONAL CAUTION Prior to OPERATION, check the engine oil and fuel levels. If not enough, add to proper levels. Warm up engine at low speed for 3-5 minutes. 3 Operate machine at full throttle speed. (incorrect clutch engagement causes clutch to burn.
NAMEPLATE AND DECALS NAMEPLATE AND DECALS NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 PART NO. 920201950 920105070 920110370 920209620 920207480 920204580 920203330 920211060 920206960 920201580 920211010 920106760 0732004460 PART NAME QTY. REMARKS DECAL: OIL SAE 10W-30 1 DECAL: MIKASA LOGO ............................ 1.........
VIBRATING PLATE ASSY. VIBRATING PLATE ASSY. PAGE 32 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
VIBRATING PLATE ASSY. VIBRATING PLATE ASSY. NO. PART NO.
BASE AND ENGINE ASSY. BASE AND ENGINE ASSY. PAGE 34 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
BASE AND ENGINE ASSY. BASE & ENGINE ASSY. NO. PART NO. 1 464117850 2 914410022 3 0105051045 4 030210250 5 031110160 6 464216560 7 011208025 8 030208200 9 031108160 10 464343670 11 464457360 12 456343340 13 951400110 13-1 951406790 14 952400690 15 001220830 16 030208200 17 464216640 18 092006010 19 464343660 20 464216590 21 001521050 35 464117920 36 456449950 37 011208030 38 030208200 39 031108160 40 022710809 PART NAME BASE ENGINE ASSY.
BASE AND ENGINE ASSY. BASE AND ENGINE ASSY. (CONTINUED) PAGE 36 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
BASE AND ENGINE ASSY. BASE AND ENGINE ASSY. (CONTINUED) NO. 41 42 43 44 45 46 47 48 51 52 53 59 60 61 62 63 64 65 66 70 71 72 103 104 105 106 107 PART NO.
VIBRATOR ASSY. VIBRATOR ASSY. PAGE 38 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
VIBRATOR ASSY. VIBRATOR ASSY. NO. PART NO.
CONTROL HANDLE ASSY. CONTROL HANDLE ASSY. PAGE 40 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
CONTROL HANDLE ASSY. CONTROL HANDLE ASSY. NO. PART NO.
CONTROL HANDLE ASSY. CONTROL HANDLE ASSY. PAGE 42 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
CONTROL HANDLE ASSY. CONTROL HANDLE ASSY. NO. PART NO.
HAND PUMP ASSY. HAND PUMP ASSY. 84 O-RING SET C PAGE 44 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
HAND PUMP ASSY. HAND PUMP ASSY. NO. B * C * 2 * 3 * 4 * 9 * 10 * 11 * 12 * 13 * 14 * 15 * 16# * 17# * 19# * 22 * 22 * 26# * 27# * 28# * 48# * 49# * 81 82 83 84 PART NO. 4649-10040 464910080 464010040 464010050 464010060 464010070 099205005 464010080 464010090 464010100 458010080 001520620 050200200 050200220 050200180 464010110 464010111 050300400 050200150 050100400 069904010 069901010 984010030 984010040 984010050 464216721 PART NAME QTY. REMARKS ACCUMLATOR 1 O-RING DUST,SEAL,SET ......................
BATTERY ASSY. (OPTION) BATTERY ASSY. (OPTION) PAGE 46 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
BATTERY ASSY. (OPTION) BATTERY ASSY. (OPTION) NO. PART NO.
ELECTRIC DEVICE ASSY. ELECTRIC DEVICE ASSY. PAGE 48 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
ELECTRIC DEVICE ASSY. ELECTRIC DEVICE ASSY. NO. PART NO. 1 464457460 2 464457470 20 464343740 24 456439070 26 454010020 28 955300400 30 506010070 42 515450380 43 11468578560 44 105198-78570 45 0105050616 46 030206150 47 952404470 PART NAME BATTERY CORD (-) 400L BATTERY CORD (+) 550L HOLDER, BATTERY WIRE CP CLAMP TC-100 BUZZER (EBL) CLAMP TC-150 WIRE HARNESS WIRE HARNESS HARNESS (C), WIRE BOLT 6X15 T WASHER, LOCK M6 WASHER, FLAT M6 QTY.
YANMAR L-70EE — CYLINDER BLOCK ASSY. CYLINDER BLOCK ASSY. PAGE 50 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
YANMAR L-70EE — CYLINDER BLOCK ASSY. CYLINDER BLOCK ASSY. NO. PART NO.
YANMAR L-70EE — CYLINDER HEAD AND COVER ASSY. CYLINDER HEAD AND COVER ASSY. PAGE 52 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
YANMAR L-70EE — CYLINDER HEAD AND COVER ASSY. CYLINDER HEAD & COVER ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 11487111020 CYLINDER HEAD 1 6 11487111100 VALVE, SUCTION 1 7 11487111110 VALVE, EXHAUST 1 8 11435011120 SPRING, VALVE 2 9 10115811180 RETAINER, SPRING 2 10 27310060001 COTTER ASSY 2 12 11477111250 SUPPORT CAM, ARM ........................................1 ............. INCLUDES ITEMS W/ * 13 11477111260 SUPPORT, ROCKER ARM 1 * 14 ARM ASSY, INTAKE ...........................................1 ......
YANMAR L-70EE — MUFFLER ASSY. MUFFLER ASSY. PAGE 54 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
YANMAR L-70EE — MUFFLER ASSY. MUFFLER ASSY. NO. PART NO. 1 11425013201 2 11438813600 8 26106060122 9 26216080182 10 26366080002 11 11428813800 12 26554060182 * 13 26367060002 * PART NAME QTY. REMARKS GASKET (NON — ASB.) 1 MUFFLER ASSY 1 BOLT M 6X 12 PLATED 2 STUD M 8X 18 PLATED 2 NUT M 8 2 DEFLECTOR EXH ...............................................1 ............. INCLUDES ITEMS W/ * SCREW M 6X 18 1 U — NUT M6 1 MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
YANMAR L-70EE — AIR CLEANER ASSY. AIR CLEANER ASSY. PAGE 56 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
YANMAR L-70EE — AIR CLEANER ASSY. AIR CLEANER ASSY. NO. PART NO. 1 11425012211 2 71425012560 4 * 11425012520 5 11425012530 * 6 * 11465012591 7 * 11425012560 8 11425012550 * 9 11425012300 10 11439912010 11 11435012202 12 26106060252 13 26226060142 14 26226060552 PART NAME QTY. REMARKS GASKET, AIR CLEANER 1 CLEANER ASSY, AIR .........................................1 .............
YANMAR L-70EE — CRANKSHAFT, PISTON, CAMSHAFT ASSY. CRANKSHAFT, PISTON AND CAMSHAFT ASSY. PAGE 58 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
YANMAR L-70EE — CRANKSHAFT, PISTON, CAMSHAFT ASSY. CRANKSHAFT, PISTON & CAMSHAFT ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 71488014580 CAMSHAFT (D) ASSY 1 6 11425014200 TAPPET 2 7 11477114260 TAPPET, F.O. 1 8 11435014450 ROD, PUSH 2 12 71487621730 CRANKSHAFT ASSY 1 25 10385401221 NUT M16 1 26 11425021550 WASHER, FLYWHEEL 1 29 11488121590 FLYWHEEL W/RING GEAR ............................ 1 .................
YANMAR L-70EE — LUB OIL PUMP AND GOVERNOR ASSY. LUB. OIL PUMP AND GOVERNOR ASSY. PAGE 60 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
YANMAR L-70EE — LUB OIL PUMP AND GOVERNOR ASSY. LUB. OIL PUMP & GOVERNOR ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 11425032010 PUMP ASSY, LUB. OIL 1 6 11425032070 COVER, LUB. OIL PUMP 1 7 10333832570 O — RING 1 8 22312030160 PARALLEL PIN 3 X 16 1 9 26476060142 BOLT M 6X 14, TAPPING 3 10 11425035110 STRAINER, LUB. OIL ..................................... 1 ................. INCLUDES ITEMS W/ * 12 24341000224 O — RING 1A S — 22.
YANMAR L-70EE — COOLING AND STARTING DEVICE ASSY. COOLING AND STARTING DEVICE ASSY. PAGE 62 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
YANMAR L-70EE — COOLING AND STARTING DEVICE ASSY. COOLING & STARTING DEVICE ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 11487045201 COVER 1 2 11435045320 RUBBER, SEAL 1 3 11435045340 COLLAR 1 4 18372055210 GROMMET 1 5 26106060202 BOLT M 6X 20 PLATED 1 6 11436045101 CASE, FAN (SILVER) (17) 1 7 11425045301 RUBBER, CUSHION 4 8 11425045310 COLLAR 4 9 11425045330 SEAL, FAN CASE 1 10 11437045351 BOLT, FAN CASE 4 11 11488076050 STARTER ASSY, RECOIL ............................. 1 .................
YANMAR L-70EE — FUEL INJECTION PUMP ASSY. FUEL INJECTION PUMP ASSY. PAGE 64 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
YANMAR L-70EE — FUEL INJECTION PUMP ASSY. FUEL INJECTION PUMP ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 71465051100 PUMP ASSY, F. INJECT. ................................ 1 ................. INCLUDES ITEMS W/ * 2 10554651020 GASKET 1 * 3 11425051080 PLATE 1 * 4 BODY, F.I. PUMP 1 * 11465051100 10 11425051160 SPRING 1 * 11465051300 11 VALVE ASSY, DELIVERY 1 * 14 SPRING, DELIV. VALVE 1 * 10554651330 15 11425051340 HOLDER, F.I.P.
YANMAR L-70EE — FUEL TANK AND FUEL LINE ASSY. FUEL TANK AND FUEL PIPE ASSY. PAGE 66 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
YANMAR L-70EE — FUEL TANK AND FUEL LINE ASSY. FUEL TANK & FUEL LINE ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 71435055711 TANK, FUEL (RED) (50) ................................. 1 ............. INCLUDES ITEMS W/ * 3 11428855040 CAP ASSY, TANK ........................................... 1 ............. INCLUDES ITEMS W/# * 5 # 11428855080 VALVE 1 * 6 STRAINER, FUEL 1 * 11425055100 7 11435055150 PIPE, GAUGE 1 * 11425055201 8 DAMPER.
YANMAR L-70EE — STARTING MOTOR AND DYNAMO ASSY. STARTING MOTOR AND DYNAMO ASSY. PAGE 68 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
YANMAR L-70EE — STARTING MOTOR AND DYNAMO ASSY. STARTING MOTOR & DYNAMO ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 11436277011 STARTER (S114 - 414A) ..................................1 ............
YANMAR L-70EE — TOOL, LABEL, AND GASKET ASSY. TOOL, LABEL AND GASKET SET ASSY. PAGE 70 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
YANMAR L-70EE — TOOL, LABEL, AND GASKET ASSY. TOOL, LABEL & GASKET SET ASSY. NO. PART NO. PART NAME QTY. REMARKS 3 18325007230 LABEL, OPERATION 1 4 11425007090 LABEL, AIR COOLED 1 5 11425007111 LABEL, YANMAR 1 6 11426807240 LABEL, CAUTION 1 7 11426107350 LABEL 1 8 11426807350 LABEL, HOW TO START 1 12 11425092600 BAG, TOOL 1 13 16033092730 SCREWDRIVER 1 14 28110100120 WRENCH 10X12 1 15 28110140170 WRENCH 14X17 1 16 28210000150 FEEDER, OIL 1 17 71487192600 GASKET SET ..........................................
TERMS AND CONDITIONS OF SALE — PARTS PAYMENT TERMS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Multiquip reserves the right to quote and sell direct to Government agencies, and to Original Equipment Manufacturer accounts who use our products as integral parts of their own products. a. SPECIAL EXPEDITING SERVICE Terms of payment for parts are net 30 days.
NOTES MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
OPERATION AND PARTS MANUAL HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING UNITED STATES Multiquip Corporate Office 18910 Wilmington Ave. Carson, CA 90746 Contact: mq@multiquip.com MQ Parts Department Tel.