OPERATION AND PARTS MANUAL SERIES MODEL MVH-150D2 REVERSIBLE PLATE COMPACTOR (YANMAR L48V6 DIESEL ENGINE) Revision #2 (01/16/07) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
MVH-150D2 — PROPOSITION 65 WARNING Engine exhaust and some of its PAGE 2 — MVH-150D2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
NOTE PAGE MVH-150D2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
MVH-150D2 — TABLE OF CONTENTS MQ MIKASA SERIES MVH-150D2 PLATE COMPACTOR YANMAR L48V6F3R4AAW4 ENGINE Proposition 65 Warning .............................................. 2 Table Of Contents ...................................................... 4 Parts Ordering Procedures ........................................ 5 Safety Message Alert Symbols ............................... 6-7 Rules for Safe Operation ........................................ 8-9 Dimensions ...............................................
www.multiquip.com Effective: January 1st, 2006 PARTS ORDERING PROCEDURES Ordering parts has never been easier! Choose from three easy options: Best Deal! Order via Internet (Dealers Only): If you have an MQ Account, to obtain a Username and Password, E-mail us at: parts@multiquip.com. Order parts on-line using Multiquip’s SmartEquip website! ■ View Parts Diagrams ■ Order Parts ■ Print Specification Information To obtain an MQ Account, contact your District Sales Manager for more information.
MVH-150D2 — SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others. NOTE This Owner's Manual has been developed to provide complete instructions for the safe and efficient operation of the Multiquip Model MVH-150D2 ReversiblePlate Compactor.
MVH-150D2 — SAFETY MESSAGE ALERT SYMBOLS CAUTION - Rotating Parts CAUTION - Equipment Damage Messages NEVER operate equipment with covers, or guards removed. Keep fingers, hands, hair and clothing away from all moving parts to prevent injury. Other important messages are provided throughout this manual to help prevent damage to your COMPACTOR, other property, or the surrounding environment. CAUTION - Sight and Hearing Hazards ALWAYS wear approved eye and hearing protection.
MVH-150D2 — RULES FOR SAFE OPERATION DANGER - Read Manual Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the compactor: GENERAL SAFETY ■ NEVER touch the hot exhaust manifold, muffler or cylinder. Allow these parts to cool before servicing engine or plate compactor.
MVH-150D2 — RULES FOR SAFE OPERATION Loading and Unloading ■ Before lifting compactor, make sure that machine parts, guard hook, and vibration insulators are not damaged and screws are not loosened or lost. ■ When using a crane or lifting device, always make sure that it is properly secured to the guard hook on the compactor. Maintenance Safety ■ NEVER lubricate components or attempt service on a running machine. ■ ALWAYS allow the machine a proper amount of time to cool before servicing.
MVH-150D2 — DIMENSIONS C B D A Figure 1. MVH-150D2 Reversible Plate Compactor Dimensions TABLE 1. DIMENSIONS REFERENCE LETTER DIMENSIONS IN. (MM) A 17.0 in. (432 mm.) B 30.5 in. (775 mm.) C 43 in. (1,092 mm.) D 26.0 in. (660 mm.) PAGE 10 — MVH-150D2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
MVH-150D2 — SPECIFICATIONS TABLE 2. Specifications (Compactor) Models MVH-150D2 Centrifugal Force 6,620 lbs. (3,002 kg) Number of Vibrations 5,600 vibrations/min Traveling Speed 75 ft./min (23 meters/min) Plate Size (LxW) 17.0 x 26.0 in. (430 x 700 mm) Operating Weight 357 lbs. (162 kg) Table 3. Specifications (Engine) Model Type Engine 2.7 in. x 1.8 in. (70 mm x 57 mm) Displacement 219 cc (13.4 cu-in) Max Output 4.2 H.P./3600 R.P.M.
MVH-150D2 — GENERAL INFORMATION Plate Compactor Frequency/Speed The Mikasa MVH-150D2 is a walk-behind reversible plate compactor designed for the compaction of sand, clay and asphalt. This plate compactor is a powerful compacting tool capable of applying a tremendous force in consecutive high frequency vibrations to a soil surface. Its applications include soil compacting for road, embankments and reservoirs as well as backfilling for gas pipelines, water pipelines and cable installation work.
MVH-150D2 — COMPONENTS (PLATE COMPACTOR) Figure 2. MVH-150D2 Components Figure 2 shows the location of the controls, indicators and general maintenance parts. The function of each control is described below: 7. Engine – This plate compactor use a YANMAR L48V6 diesel engine. Refer to the owner’s manual for engine information and related topics. 1. Breather Cap – Remove this cap to bleed (remove air) the hydraulic system. When replacing hydraulic oil, use "Shell Tellus #46 or equivalent". 8. 2.
MVH-150D2 — COMPONENTS (YANMAR L48V6 ENGINE) 9 3 4 1 2 10 5 11 7 8 6 Figure 3. Engine Controls and Components The engine shown above is a YANMAR L48V6 engine (Figure 3). 7. Oil Filler Cap / Dipstick – Remove this cap to add oil to the engine crankcase. Read dipstick to determine if oil level is The engine must be checked for proper lubrication and filled low. DO NOT over fill. with fuel prior to operation.
MVH-150D2 — INSPECTION CAUTION - General Safety Precautions NEVER operate the compactor in a confined area or enclosed area structure that does not provide ample free flow of air. 3. Insert and remove the dipstick without screwing it into the filler neck. Check the oil level shown on the dipstick. 4. If the oil level is low (Figure 6), fill to the edge of the oil filler hole with the recommended oil type (Table 4). Maximum oil capacity is 0.84 quarts (0.80 liters).
MVH-150D2 — INSPECTION 2. The V-belt tension is proper if the V-belt bends 10 to 15 mm (Figure 9) when depressed with finger at midway between the clutch and vibration pulley shafts. V-Belt Check CAUTION - V-Belt Check NEVER attempt to check the V-belt with the engine running. Severe injury can occur of your hand (Figure 7) gets caught between the V-belt and the clutch. Always use safety gloves. CLUTCH PULLEY Figure 9. V-Belt Tension VIBRATOR PULLEY Figure 7. V-Belt Hazard 1.
MVH-150D2 — OPERATION This section is intended to assist the operator with the initial start-up of the compactor. It is extremely important that this section be read carefully before attempting to use the compactor in the field. Starting the Engine 4. Grasp the starter grip (Figure 14) and slowly pull it out. The resistance becomes the hardest at a certain position, corresponding to the compression point. Pull the starter grip briskly and smoothly for starting. 1. Open the fuel cock (Figure 11).
MVH-150D2 — OPERATION/PREPARATION FOR LONG TERM STORAGE CAUTION - Safety Rules Make sure to follow all safety rules referenced in the safety section of this manual before operating compactor. Keep work area clear of debris and other objects that could cause damage to the compactor or bodily injury. Normal Shut-Down Procedure: 1. Place the speed control lever in the IDLE position. Allow the engine to cool down for 2 to 3 minutes. 2.
MVH-150D2 — MAINTENANCE CAUTION - General Maintenance Safety TABLE 6. MVC-150D2 ENGINE CHECK Inspection and other services should always be carried out on hard and level ground with the engine shutdown. Inspection and Maintenance Service Tables. To make sure your plate compactor is always in good working condition before using, carry out the maintenance inspection in accordance with Tables 5 through 7.
MVH-150D2 — MAINTENANCE Engine Oil Replacement Checking and the V-Belt 1. Replace engine oil, first in 25 hours of operation and every 50 to 100 hours afterwards. After 200 hours of operation, remove the belt cover to check the Vbelt tension (Figure 20). 2. Drain the engine oil when the oil is warm as shown in Figure 18. 1. Remove the belt cover. 2. Tension is proper if the belt bends about 10 mm when depressed strongly with finger between shafts.
MVH-150D2 — MAINTENANCE 2. After draining, reconnect the hydraulic hose to vibrator. 3. Fill oil through breather hole of hand pump. (Capacity: About 300 cc). Use Shell Tellus Oil #46 or equivalent 4. Removing breather plug at vibrator cylinder causes oil to flow out of breather hole in a while. When aeration disappears, replace the plug and tighten securely. 5. Replace breather plug of hand pump and fit the plug cap. After making sure that oil in pump is at proper level, replace the breather plug.
MVH-150D2 — ENGINE TROUBLESHOOTING Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take remedial action following the diagnosis based on the Engine Troubleshooting Table (Table 8) information shown below and on the following page. If the problem cannot be remedied, please leave the unit as it is and consult Multiquip’s business office or service plant. TABLE 8.
MVH-150D2 — PLATE COMPACTOR TROUBLESHOOTING Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take remedial action following the diagnosis based on the Compactor Troubleshooting Table (Table 9) information shown below. If the problem cannot be remedied, please leave the unit as it is and consult Multiquip’s business office or service plant. TABLE 9.
MVH-150D2 — EXPLANATION OF CODE IN REMARKS COLUMN The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availibility of the parts listed. PART NO. PART NAME QTY. 12345 BOLT ....................... 1 .... WASHER, 1/4 IN. ...........
MVH-150D2 — SUGGESTED SPARE PARTS MQ MIKASA MVH-150D2 PLATE COMPACTOR W/YANMAR L48V6 DIESEL ENGINE 1 to 3 Units Qty. P/N Description 3 ......... 070100352 ....... V-BELT A-35 (BLUE) 2 ......... 956100059 ....... THROTTLE WIRE 3 ......... 11465012590 ... ELEMENT, A/C W/PRE-FILTER 1 ......... 11429955040 ... CAP, FUEL TANK 1 ......... 11429976630 ... ROPE, RECOIL STARTER 2 ......... 11429935110 ... LUB. OIL FILTER COMPLETE 2 ......... 11425055121 ... FILTER, FUEL STAINER 1 ......... 11429955100 ...
MVH-150D2 — NAMEPLATE AND DECALS NAME PLATE AND DECAL ASSY. 1 SHELL TELLUS OIL 46 NPA-748 J 2 10 OPERATIONAL CAUTION Prior to OPERATION: Check engine oil and fuel level if not enough, add to proper level To START engine: NPA-953 J 1. Warm up engine at low speed for 3 to 5 minutes. 2. Operate machine always at full speed to avoid incorrect clutch engagement. 3. Use travel lever for forward and reverse motion. Do not push or pull lever strongly. To STOP engine: Move stop switch to “OFF” position.
MVH-150D2 — NAMEPLATE AND DECALS NAME PLATES ASSY. NO. 1 2 3 4 5 6 7 8 9 10 PART NO. 920207480 920207430 920203330 920207690 920207670 920201580 920201950 920207660 920209530 PART NAME QTY. REMARKS DECAL: SHELL TELLUS OIL 46 .................. 1 ........... NPA-748 DECAL: CAUTION ........................................ 1 ........... NPA-743 EAR PROTECTION LABEL .......................... 1 ........... NPA-333 DECAL: CAUTION, MANUAL ....................... 1 ........... NPA-769 DECAL: V-BELT RPF-3350 ....
MVH-150D2 — VIBRATING PLATE ASSY. VIBRATING PLATE PAGE 28 — MVH-150D2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
MVH-150D2 — VIBRATING PLATE ASSY. VIBRATING PLATE NO. 1 2 3 4 5 6 7 8 PART NO. 459115390 939010130 020312100 030212300 001221230 952405600 460449160 953405260 PART NAME VIBRATING PLATE SHOCK ABSORBER MED-70S NUT M12 WASHER, LOCK M12 BOLT 12 X 30 T WASHER 12.5 X 35 4.5 OIL GAUGE PACKING 1/4, CU QTY. 1 4 4 8 4 4 1 1 REMARKS MVH-150D2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
MVH-150D2 — BODY ASSY. BODY ASSY. PAGE 30 — MVH-150D2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
MVH-150D2 — BODY ASSY. BODY ASSY. NO. 1 2 3 3-1 4 5 6 7 8 11 12 13 14 15 16 17 18 19 20 21 22 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 51 52 53 56 57 58 59 PART NO.
MVH-150D2 — VIBRATOR ASSY. VIBRATOR ASSY. PAGE 32 — MVH-150D2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
MVH-150D2 — VIBRATOR ASSY. VIBRATOR ASSY. NO. A 1 2* 3* 4* 5* 6* 9* 11* 12* 13* 14* 15* 16* 17* 18* 19* 20* 21 22* 23* 24* 25* 26* 27* 28* 29* 30* 31* 32* 33* 34* 35* 36 37* 38 39 40 * 41 PART NO.
MVH-150D2 — CONTROL ASSY. CONTROL ASSY. PAGE 34 — MVH-150D2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
MVH-150D2 — CONTROL ASSY. CONTROL ASSY. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 26 27 28 29 30 31 31-1# 31-2# 32 34 35 36 40 51 52 53 PART NO.
MVH-150D2 — CONTROL ASSY. CONTROL ASSY. PAGE 36 — MVH-150D2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
MVH-150D2 — CONTROL ASSY. CONTROL ASSY. NO. A 54 * 55 * 56 * 57 * 58 * 59 * 60 * 61 * 62 * 63 * 64 * 65 * 66 * 68 69 70 81 82 83 84 PART NO. 362910060 342341550 362910090 362455630 362455620 050100450 050200100 031110160 032110180 096206006 020410060 1022131008 096208020 020408050 001220625 030206150 031106100 956100059 16067066350 26756060002 26366060002 PART NAME QTY. REMARKS THROTTLE LEVER ASSY. ........................... 1 ...........
MVH-150D2 — HAND PUMP ASSY. HANDLE PUMP ASSY. PAGE 38 — MVH-150D2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
MVH-150D2 — HAND PUMP ASSY. HANDLE PUMP ASSY. NO. A B 1 * 2 * 4 * 7 * 8 * 9 % * 10 % * 11 % * 12 % * 13 * 14 * 16 * 17 * 18 * 19 * 20 * 21 * 22 * 25 * 26 * 27 * 28 * 29 * 30 * 31 # * PART NO. 458338001 458310150 458010160 458010100 458010170 458010110 458010120 458010180 042500607 458010190 458010090 025406025 458010200 458010210 458010220 458010131 458010140 001540635 458010080 458451630 050100250 050200200 050200150 050300670 050300080 050300220 050200180 PART NAME QTY. REMARKS PUMP ASSY. .............
YANMAR L48V6 ENGINE— CYLINDER BLOCK ASSY. CYLINDER BLOCK ASSY. PAGE 40 — MVH-150D2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
YANMAR L48V6 ENGINE — CYLINDER BLOCK ASSY. CYLINDER BLOCK ASSY. NO. 1 5 6 7 8 9 10 11 12 13 14 20 21 22 33 34 35 36 37 38 39 40 45 * 45 45 48 49 50 53 54 56# 57 58 59 60 61 62 PART NO.
YANMAR L48V6 ENGINE— CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 42 — MVH-150D2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
YANMAR L48V6— CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. NO. 1 6 7 8 9 10 11 12 13 * 14 * 16% 17% 18 * 20$ 21$ 22 * 23 24 25 26 27 28 29 30 31 32 33 35# 38# 39# 55 PART NO.
YANMAR L48V6 ENGINE— AIR CLEANER ASSY. AIR CLEANER PAGE 44 — MVH-150D2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
YANMAR L48V6 ENGINE— AIR CLEANER ASSY. AIR CLEANER ASSY. NO. 1 2 3 4 * 5 * 6 * 7 * 8 * 10 $ * 11 13 14 15 16 17 PART NO. 11429912210 11429912300 11428812511 11465007450 11428812520 11428812532 11425212560 11465012590 11465012550 11425212550 11477112010 11477112200 26106060252 26226060142 26226060552 PART NAME QTY. REMARKS GASKET, AIR CLEANER 1 U- NUT 3 CLEANER, AIR ASSY. ................................ 1 .............. INCLUDES ITEMS W/ * LABEL, AIR CLEANER 1 COVER COMPL.
YANMAR L48V6 ENGINE— MUFFLER ASSY. MUFFLER ASSY. PAGE 46 — MVH-150D2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
YANMAR L48V6 ENGINE— MUFFLER ASSY. MUFFLER ASSY. NO. 18 24 27 28 29 30 PART NO. 11429913200 11428813500 26106060142 26216080182 26366080002 11429913800 PART NAME MUFFLER GASKET MUFFLER ASSY. BOLT M6X14 PLATED STUD M 8X 18 PLATED NUT M 8 EXHAUST DEFLECTOR QTY. 1 1 2 2 2 1 REMARKS MVH-150D2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
YANMAR L48V6 ENGINE— CRANKSHAFT AND CAMSHAFT ASSY. CRANKSHAFT AND CAMSHAFT ASSY. PAGE 48 — MVH-150D2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
YANMAR L48V6 ENGINE— CRANKSHAFT AND CAMSHAFT ASSY. PISTON ASSY. NO. 1 6 7 8 10 19 20 21 24 27 * 61 66 67 68 69 PART NO. 71429514580 11429914200 11477114260 11425014451 71477221701 11429921220 11429921550 22512040120 11429921590 11426221600 71477028531 24101062020 16031014550 22512050300 26106080202 PART NAME QTY. REMARKS CAMSHAFT (D) ASSY. 1 TAPPET 2 TAPPET, F.O. 1 PUSH ROD 2 CRANKSHAFT ASSY. 1 NUT 1 FLYWHEEL WASHER 1 KEY 4X 12 1 FLYWHEEL ASSY. ...................................... 1 ..............
YANMAR L48V6 ENGINE— PISTON ASSY. PISTON ASSY. PAGE 50 — MVH-150D2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
YANMAR L48V6 ENGINE— PISTON ASSY. PISTON ASSY. NO. 28 28 28 30# 30# 30# 36 37 38 41 * 42 * 42 42 44 * PART NO. 71429522720 71429522620 71429522580 71429522500 71429522540 71429522550 11429922300 22252000190 71429923700 11926523200 71477023600 71477023610 71477023620 11477023100 PART NAME QTY. REMARKS PISTON W/RINGS (D) STD. ........................ 1 .............. INCLUDES ITEMS W/# PISTON W/RING OS=0.25 .......................... 1 .............. INCLUDES ITEMS W/# PISTON W/RING OS=0.50 ...............
YANMAR L48V6 ENGINE— LUB. OIL PUMP AND GOVERNOR ASSY. LUB. OIL PUMP & GOVERNOR ASSY. PAGE 52 — MVH-150D2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
YANMAR L48V6 ENGINE— LUB. OIL PUMP AND GOVERNOR ASSY. LUB. OIL PUMP & GOVERNOR ASSY. NO. 1 7 9 10 11 12 14# 15 16 22 23 25 * 29 30 31 32 40 42 43 44 45 46 47 48 49 50 51 52 53 54 55 57 58 60+ 61+ 62 PART NO.
YANMAR L48V6 ENGINE— COOLING AND STARTING DEVICE ASSY. COOLING AND STARTING DEVICE ASSY. PAGE 54 — MVH-150D2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
YANMAR L48V6 ENGINE— COOLING AND STARTING DEVICE ASSY. COOLING & STARTING DEVICE ASSY. NO. 1 2 4 5 6 7 8 10 11 * 13 * 15 * 17 * 19 * 20 * 21 * 22 * 23 * 24 * 25 26 27 29 30 PART NO. 11429945210 26106060122 11429545100 11429945300 11429945310 11429945330 11429945350 11429976250 11429976500 11429976520 11439976530 11439976540 11439975550 11439976560 11439976570 11439976580 11439976620 11429976630 11429976590 26106060082 26106060122 11429976600 11429976610 PART NAME QTY.
YANMAR L48V6 ENGINE— FUEL INJECTION PUMP ASSY. FUEL INJECTION PUMP ASSY. PAGE 56 — MVH-150D2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
YANMAR L48V6 ENGINE— FUEL INJECTION PUMP ASSY. FUEL INJECTION PUMP ASSY. NO. 1 2 * 3 * 4 * 5 * 11 * 14 * 15 * 16 * 17 * 18 * 19 * 20 * 21 * 22 23 # 24 # 25 # 26 # 27 # 28 # 29 # 32 #% 33 # 44 PART NO.
YANMAR L48V6 ENGINE— FUEL TANK & FUEL LINE ASSY. FUEL TANK AND FUEL LINE ASSY. PAGE 58 — MVH-150D2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
YANMAR L48V6 ENGINE — FUEL TANK AND FUEL LINE ASSY. FUEL TANK & FUEL LINE ASSY. NO. 1 3# 4# 5# 6# 7# 8 9% 10# 11 12 13+ 14 15 16 17 18 19 20 * 21 * 22 23 PART NO. 71429955720 10530055080 23414080000 11429955100 11429955040 11429955201 11425055121 11425055130 11429955210 11429955230 11425055301 24341000150 11429955810 22117080000 26106080452 26368060002 26106060162 11477059030 11427059010 11426859061 12472259050 11425059060 PART NAME QTY. REMARKS FUEL TANK, BLACK ..................................... 1 ...
YANMAR L48V6— TOOLS, LABELS AND GASKETS SET ASSY. TOOLS, LABELS AND GASKET SET ASSY. PAGE 60 — MVH-150D2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
YANMAR L48V6 ENGINE— TOOLS, LABELS AND GASKETS SET ASSY. TOOLS, LABESL AND GASKET SET ASSY. NO. 3 4 5 6 7 10 11 * 12 * 13 * 14 * 15 * 16 17# 23# 24# 25# 26# 27# 28# 29# 30# 31# 32# 33# 34# 35# 36# 37# 38# PART NO.
Effective: February 22, 2006 PAYMENT TERMS TERMS AND CONDITIONS OF SALE — PARTS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Terms of payment for parts are net 30 days. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments are F.O.B. point of origin.
NOTE PAGE MVH-150D2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV.
OPERATION AND PARTS MANUAL HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING UNITED STATES Multiquip Corporate Office 18910 Wilmington Ave. Tel. (800) 421-1244 Carson, CA 90746 Fax (800) 537-3927 Contact: mq@multiquip.