OPERATION AND PARTS MANUAL SERIES HPLA/HPHA-SERIES 46" MODELS: HPLA46411H HPHA46411H WALK-BEHIND TROWEL (Honda GX340K1QAP2 Gasoline Engine) Revision #6 (07/06/10) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
HPLA/HPHA-SERIES 46" TROWEL— PROPOSITION 65 WARNING Engine exhaust and some of its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Some examples of these chemicals are: Leadfromlead-basedpaints. Crystallinesilicafrombricks. Cementandothermasonryproducts. Arsenicandchromiumfromchemically treatedlumber.
NOTE PAGE HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV.
HPLA/HPHA-SERIES 46" TROWEL— TABLE OF CONTENTS Proposition 65 Warning ............................................. 2 Table Of Contents ..................................................... 4 Parts Ordering Procedures ....................................... 5 Training Checklist ...................................................... 6 Daily Pre-Operation Checklist ................................... 7 Safety Message Alert Symbols .............................. 8-9 Rules For Safe Operation ...................
www.multiquip.com PARTS ORDERING PROCEDURES Ordering parts has never been easier! Choose from three easy options: Order via Internet (Dealers Only): Best Deal! Effective: January 1st, 2006 If you have an MQ Account, to obtain a Username and Password, E-mail us at: parts@multiquip. com. Order parts on-line using Multiquip’s SmartEquip website! N View Parts Diagrams N Order Parts N Print Specification Information To obtain an MQ Account, contact your District Sales Manager for more information.
HPLA/HPHA-SERIES 46" TROWEL— TRAINING CHECKLIST TRAINING CHECKLIST This checklist will lists some of the minimum requirements for machine maintenance and operation. Please feel free to detach it and make copies. Use this checklist whenever a new operator is to be trained or it can be used as a review for more experienced operator’s. TRAINING CHECKLIST NO. DESCRIPTION 1 Read Operator’s Manual completely. 2 Machine layout, location of components, checking of engine and gearbox fluid level.
HPLA/HPHA-SERIES 46" TROWEL— DAILY PRE-OPERATION CHECKLIST DAILY PRE-OPERATION CHECKLIST DAILY PRE-OPERATION CHECKLIST 1 Engine Oil Level. 2 Gearbox Fluid Level. 3 Condition of Blades. 4 Blade Pitch Operation. 5 Safety Stop Switch Operation. 6 V-Belt Clutch Operation. COMMENTS: HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV.
HPLA/HPHA-SERIES 46" TROWEL— SAFETY MESSAGE ALERT Y SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others. NOTE This Owner's Manual has been developed to provide complete instructions for the safe and efficient operation of the Multiquip HPLA/HPHA-SERIES 46" WALKBEHIND TROWEL.
HPLA/HPHA-SERIES 46" TROWEL— SAFETY MESSAGE ALERT SYMBOLS Accidental Starting ALWAYS place the engine ON/OFF switch in the OFF position, when the trowel is not in use. Over Speed Conditions NEVER tamper with the factory settings of the engine governor or settings. Personal injury and damage to the engine or equipment can result if operating in speed ranges above maximum allowable. Respiratory Hazard ALWAYS wear approved respiratory protection.
HPLA/HPHA-SERIES 46" TROWEL— RULES FOR SAFE OPERATION CAUTION: Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the HPLA/HPHA-SERIES 46" walk-behind trowel. SAFETY ■ DO NOT operate or service this equipment before reading this entire manual.
HPLA/HPHA-SERIES 46" TROWEL— RULES FOR SAFE OPERATION ■ DO NOT operate this trowel unless all guards and safety devices are attached and in place. See pages 16 and 17. ■ ALWAYS use proper lifting techniques when moving the trowel. See page 24. ■ ALWAYS check to make sure that the operating area is clear before starting the engine. ■ ALWAYS test the safety stop switch devices before operating the trowel. ■ NEVER place your feet or hands inside the guard rings while starting or operating this equipment.
HPLA/HPHA-SERIES 46" TROWEL— OPERATION AND SAFETY DECALS Machine Safety Decals The HPLA/HPHA-SERIES 46" walk-behind trowel is equipped with a number of safety decals. These decals are provided for operator safety and maintenance information. (Figure 1) below illustrates these decals as they appear on the machine. Should any of these decals become unreadable, replacements can be obtained from your dealer. CAUTION WARNING! DO NOT LIFT MACHINERY BY GUARD RING.
HPLA/HPHA-SERIES 46" TROWEL— SPECIFICATIONS (TROWEL) Side View Figure 2. HPLA/HPHA-SERIES 46" Trowel Dimensions Table 1. HPLA/HPHA-Series 46" Trowel Specifications A– Height (Lifting Hook) 34.5 in (876.2 mm) B– Height Engagement Lever) 41.1 in (1,044.2 mm) 46.0 (1,168.4 mm) C–Width 75.2 (1,910.1 mm) D–Length Weight – Operating 230 lbs./105 Kg. Sound Pressure 97 db Vibration 2.5g (24.5 m/s2) Ring Diameter 46 in (117 cm) Number of Blades 3 or 4 Blade Tip Speed – FPM (m/s) 1,478 fpm (7.
HPLA/HPHA-SERIES 46" TROWEL— SPECIFICATIONS (ENGINES) Table 2. Specifications (Engine) Engine Model HONDA GX340K1QAP2 Type Air-cooled 4 stroke, Single Cylinder, OHV, Horizontal Shaft Gasoline Engine Bore X Stroke 3.2 in. X 2.5 in. (82 mm x 64 mm) Displacement 23.7 cu. in. 389 cc Max Output Fuel Tank Capacity Fuel Lube Oil Capacity Speed Control Method Star ting Method Dimension (L x W x H) Dry Net Weight 11.0 H.P./3600 R.P.M. Approx. 1.72 U.S. Gallons (6.
HPLA/HPHA-SERIES 46" TROWEL— GENERAL INFORMATION HPLA/HPHA-SERIES Familiarization 46" Walk-Behind Trowel This walk-behind trowel is designed for the floating and finishing of concrete slabs. Take a walk around the trowel. Take notice of all the major components (see Figure 3, pages 16 and 17) like the engine, blades, quick pitch control, air cleaner, centrifugal stop switch etc. Check that there is always oil in the engine. Read all the safety instructions carefully.
HPLA/HPHA-SERIES 46" TROWEL— CONTROLS AND COMPONENTS Figure 3. HPLA/HPHA-SERIES 46" WalkBehind Trowels PAGE 16 — HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HPLA/HPHA-SERIES 46" TROWEL— CONTROLS AND COMPONENTS (Figures 3) shows the location of the basic controls or components, for the HPLA/HPHA-SERIES 46" trowel. Listed below is a brief explanation of each control or component 1. Quick Pitch™ Control Handle – To adjust the pitch of the blades, grasp the handle then squeeze and either move the handle forward or backward to achieve the desired blade pitch. 2.
HPLA/HPHA-SERIES 46" TROWEL— BASIC ENGINE Figure 4. Engine Controls and Components INITIAL SERVICING The engine (Figure 4) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers engine manual for instructions & details of operation and servicing. 6. Choke Lever – Used in the starting of a cold engine, or in cold weather conditions. The choke enriches the fuel mixture. 1. 7. Air Cleaner – Prevents dirt and other debris from entering the fuel system.
HPLA/HPHA-SERIES 46" TROWEL — ASSEMBLY AND INSTALLATION Assembly and Installation Before the trowel can be put into operation there are some components that must be installed before the trowel can be used. This section provided general instructions on how to install those components. Instruction sheet P/N 20485 provides further details for the handle assembly. Handle Tube Installation (All Models) 1. Install the handle tube to the gearbox as shown in (Figure 5).
HPLA/HPHA-SERIES 46" TROWEL — ASSEMBLY AND INSTALLATION 4. Tighten cable clamp screw and swivel stop screw. 5. After the cable has been installed on the engine, adjust and tighten operator position of the handle to lock the throttle cable at the proper length. 6. Adjust cable tension loosening the lock nut on the throttle cable receiver (Figure 9), loosening or tightening the adjuster nut below it, then retightening the lock nut. Figure 9. Throttle Adjust 7. These are general instructions.
HPLA/HPHA-SERIES 46" TROWEL — ASSEMBLY AND INSTALLATION Pre-load Adjustment (Quick-Pitch™ Models Only) 2. 3. 4. Lock the spring in the compressed position, by releasing the blade pitch adjustment trigger, (Quick-Pitch™ model). Remove one brass set nut from the blade pitch cable end as shown in (Figure 13). 1. After the Quick-Pitch™ handle has been installed on the trowel, spring pre-load adjustment will be required. 2. Locate the adjustment screw on the underside of the handle tube (Figure 15).
HPLA/HPHA-SERIES 46" TROWEL— PRE-INSPECTION CAUTION NEVER operate the trowel in a confined area or enclosed area structure that does not provide ample free flow of air. ALWAYS wear approved eye and hearing protection before operating the trowel. NEVER place hands or feet inside the guard rings while the engine is running. ALWAYS shut the engine down before performing any kind of maintenance service on the trowel. Figure 16. Engine Oil Dipstick (Removal) 3.
HPLA/HPHA-SERIES 46" TROWEL— PRE-INSPECTION Blade Check Explosive Fuel DANGER Motor fuels are highly flammable and can be dangerous if mishandled. DO NOT smoke while refueling. DO NOT attempt to refuel the trowel if the engine is hot! or running. Check for worn or damaged blades. Check to see if one blade is worn out while the others look new. If this is the case there could be a blade pitch problem. Refer to the maintenance section of this manual for blade pitch adjustment procedure.
HPLA/HPHA-SERIES 46" TROWEL — INITIAL START-UP CAUTION The trowel is heavy and awkward to move around. Use proper heavy lifting procedures and DO NOT lift the trowel by the guard rings. Lifting the Trowel Onto a Slab. Auxiliary Lifting Tube Remove the auxiliary lifting tube located on top of the main handle. Insert the tube into the socket located on the opposite side of the gearbox (Figure 20) from the handle. Make sure that the hole in the tube engages with the pin in the socket.
HPLA/HPHA-SERIES 46" TROWEL — INITIAL START-UP 3. Place the centrifugal safety stop switch (Figure 23) in the "ON" position. 6. If the engine has started, slowly return the choke lever (Figure 24) to the OPEN position. If the engine has not started repeat steps 1 through 5. 7. Before the trowel is placed into operation, run the engine for several minutes. Check for fuel leaks, and noises that would associate with a loose guard ring and/or covers. 8. Test the Safety Stop Switch. a.
HPLA/HPHA-SERIES 46" TROWEL — OPERATION The following steps are intended as a basic guide to machine operation, and are not to be considered a complete guide to concrete finishing. We suggest that all operators (experienced and novice) read “Slabs on Grade” published by the American Concrete Institute, Detroit, Michigan. Read the “Training” section of this manual for more information. Maneuvering the Trowel PITCHING THE BLADES 2.
HPLA/HPHA-SERIES 46" TROWEL — OPERATION (Figure 30) below illustrates a typical walk-behind trowel application. Practice maneuvering the trowel. The trick is to let the trowel do the work. Continue to practice maneuvering the trowel. Try to practice as if you were finishing a slab of concrete. Practice edging and covering a large area. Remember a good finishing technique is to work backwards. Be careful when moving backwards so that hazards can be avoided.
HPLA/HPHA-SERIES 46" TROWEL — OPTIONS Clip-On Float Blades (Optional) Blades Blades should be changed when they fail to finish concrete in a satisfactory manner. NOTE Blades are a vital part of finishing concrete. This trowel, or finisher, has been designed to finish concrete and the blades are built to stringent quality standards out of the finest trowel steel.
HPLA/HPHA-SERIES 46" TROWEL — OPTIONS Grinding Attachments Trowel Arm Adjustment Tool Available grinding attachments are used for grinding surface imperfections or joints.These attachments allow greater utilization of your trowel. (Figure 35) illustrates a typical grinding disk assembly, complete with hub and stone mounting plate. If blades show uneven wear patterns or some tend to wear out faster than others, the trowel arms may need to be adjusted.
HPLA/HPHA-SERIES 46" TROWEL — MAINTENANCE (ENGINE) QP40TH — MAINTENANCE (ENGINE) Engine Maintenance Perform engine maintenance procedures as referenced by Table 4 below: Table 4. Engine Maintenance Schedule DESCRIPTION (3) OPERATION BEFORE CHECK X FIRST EVERY MONTH 3 MONTHS OR OR 10 HRS. 25 HRS. EVERY 6 MONTHS OR 50 HRS. EVERY YEAR OR 100 HRS. EVERY 2 YEARS OR 200 HRS.
HPLA/HPHA-SERIES 46" TROWEL — MAINTENANCE (ENGINE) Maintenance DANGER : Perform the engine maintenance procedures as indicated below: DAILY ■ Thoroughly remove dirt and oil from the engine and control area. Clean or replace the air cleaner elements as necessary. Check and retighten all fasteners as necessary. Check the spring box and bellows for oil leaks. Repair or replace as needed. WEEKLY ■ Remove the fuel filter cap and clean the inside of the fuel tank.
HPLA/HPHA-SERIES 46" TROWEL — MAINTENANCE (TROWEL) See the engine manual supplied with your machine for appropriate engine maintenance schedule and troubleshooting guide for problems. NOTE At the front of the book (Page 7) there is a “Daily Pre-Operation Checklist ”. Make copies of this checklist and use it on a daily basis. CAUTION! ALWAYS allow the engine to cool before servicing. NEVER attempt any maintenance work on a hot! engine. MAINTENANCE SCHEDULE Daily (8-10 Hours) 1.
HPLA/HPHA-SERIES 46" TROWEL — MAINTENANCE (TROWEL) 2. Start engine, and bring trowel blades up to full speed and look for the following conditions: ■ Does the trowel have a perceived rolling or bouncing motion when in use? ■ Look at the trowel while it is running, does the guard ring “rock up and down” relative to the ground? Spider Removal b. Loosen the jam nut and cone point square head set screw, and carefully lift the upper trowel assembly off of the spider assembly.
HPLA/HPHA-SERIES 46" TROWEL — MAINTENANCE (TROWEL) 3. Should the trowel arm inserts (bronze bushing ) come out with the trowel arm, remove the bushing from the trowel arm and set aside in a safe place. If the bushing is retained inside the spider plate, carefully remove the bushing. 4. Examine the bronze trowel arm bushing insert (Figure 46), clean if necessary. Replace bushing if out of round or worn. Trowel Arm Flatness Test 1.
HPLA/HPHA-SERIES 46" TROWEL — MAINTENANCE (TROWEL) Trowel Arm Adjustment Shown in (Figure 49) is the adjustment fixture with a trowel arm inserted. As each trowel arm is locked into the fixture, the arm bolt is adjusted to where it contacts a stop on the fixture. This will consistently adjust all of the trowel arms, keeping the finisher as flat and evenly pitched as possible. 1. Locate the trowel arm adjustment tool P/N 1817.
HPLA/HPHA-SERIES 46" TROWEL — MAINTENANCE (TROWEL) 11. Carefully lift the upper trowel assembly, line up the keyway on gear box main shaft and insert into spider assembly. V-Belt Removal and Replacement 12. Reinstall square head cone point into spider plate and tighten in place. Tighten jam nut. Use care in making sure point of set screw engages groove in gear box main shaft. 1. Remove the two T-Bolts and lockwashers hold on the belt guard. 13.
HPLA/HPHA-SERIES 46" TROWEL — TROUBLESHOOTING (TROWEL) TABLE 5. TROWEL TROUBLESHOOTING SYMPTOM Engine running rough or not at all. Safety switch not functioning. If trowel “bounces, rolls concrete, or makes uneven swirls in concrete”. Machine has a perceptible rolling motion while running. POSSIBLE PROBLEM SOLUTION Safety switch malfunction? Make sure that the safety switch is ON or replace switch if necessary. Fuel? Look at the fuel system. Make sure there is fuel being supplied to the engine.
HPLA/HPHA-SERIES 46" TROWEL — TROUBLESHOOTING (TROWEL) TABLE 5. TROWEL TROUBLESHOOTING (CONTINUED) SYMPTOM Clutch slipping or sluggish response to engine speed change. POSSIBLE PROBLEM SOLUTION Worn V-belts? Replace V-belt. Dir ty centrifugal clutch? Disassemble and clean clutch. Defective or worn out centrifugal clutch? Replace entire clutch. Worn bearings in gearbox? Rotate input shaft by hand. If shaft rotates with difficulty, check the input and output shaft bearings. Replace as necessary.
HPLA/HPHA-SERIES 46" TROWEL — TROUBLESHOOTING (ENGINE) TABLE 6. ENGINE TROUBLESHOOTING (CONTINUED) SYMPTOM POSSIBLE PROBLEM SOLUTION Difficult to start Fuel is available but spark plug will not ignite. (Power available at high tension cable). Fuel is available but spark plug will not ignite. (Power NOT available at high tension cable). Fuel is available and spark plug ignites (compression normal). Fuel is available and spark plug ignites (compression low ).
HPLA/HPHA-SERIES 46" TROWEL — EXPLANATION OF CODES The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. NOTICE The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availability of the parts listed. SAMPLE PARTS LIST NO. 1 2% 2% 3 4 PART NO. PART NAME QTY. REMARKS 12345 BOLT....................
HPLA/HPHA-SERIES 46" TROWEL — SUGGESTED SPARE PARTS HPLA/HPHA-SERIES 46" TROWEL 1 TO 3 UNITS WITH HONDA GX-340K1QAP2 ENGINE. 1 to 3 Units Qty. ......P/N ........................... Description 1 ...........20478 ................ GRIP, LEFT 1 ...........20463 ................ GRIP, RIGHT 2 ...........20856 ................ SAFETY SWITCH 1 ...........20285 ................ CABLE STANDARD HANDLE 1 ...........20297 ................ CABLE QUICK-PITCH™ 1 ...........21172 ................ THROTTLE CABLE 4 .......
HPLA/HPHA-SERIES 46" TROWEL — NAMEPLATE AND DECALS NAMEPLATES AND DECALS PAGE 42 — HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HPLA/HPHA-SERIES 46" TROWEL — NAMEPLATE AND DECALS NAMEPLATE AND DECALS NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 PART NO. 1758 12405 20527 20526 2942 1736 1735 11246 1940 11092 11246 1492 1147 11246 1261 1848 2938 11246 PART NAME QTY. REMARKS DECAL: QUICK-PITCH™ HANDLE 1 2 DECAL: QUICK-PITCH™ HANDLE INSERT DECAL: QUICK-PITCH™ WARNING 1 DECAL: QUICK-PITCH™ LATCH WARNING 1 DECAL: MQ WHITEMAN 13" 1 DECAL: ARROWS 1 DECAL: PRE-LOAD INDICATOR 1 DECAL: OIL CHECK .......................................
HPLA/HPHA-SERIES 46" TROWEL — STANDARD HANDLE ASSY. STANDARD HANDLE ASSY. 40 3 21 5 7 4 8 6 9 10 22 18 DETAIL “A” 17 43 16 14 3 12 42 15 19 2 20 44 SEE DETAIL “B” 21 22 11 SEE DETAIL “A” 1 13 24 23 39 27 30 31 32 25 26 41 ASM 38 37 28 1 36 45 35 29 33 2 DETAIL “B” 34 1 APPLY THREAD LOCK (LOCTITE 242 BLUE OR EQUIVALENT). 2 PART OF ENGINE ASSEMBLY. PAGE 44 — HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HPLA/HPHA-SERIES 46" TROWEL — STANDARD HANDLE ASSY. STANDARD HANDLE ASSY. NO. 1 2 3 4 * 5 * 6 * 7 * 8 * 9 * 10 11 12 13 14 15 16 17 18 19 20 21■ 22 23 24 25# 26# 27# 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 PART NO. 20463 20774 20818 20817 0281 20282 0122C 3615 1478 20478 12556 21171 20439 1492 20438 0786 0786A 20287 20285 20856 1602 20988 20514 1662 20275 1118 20279 21017 1493 12567 2942 21173 20845 1116 10133 20392 20280 20819 20301 20421 A8638 21172 PART NAME QTY.
HPLA/HPHA-SERIES 46" TROWEL — QUICK-PITCH™ HANDLE ASSY. QUICK-PITCH ™ T-HANDLE ASSY. 2 3 25 55 6 5 1 18 20 19 26 21 14 58 4 10 24 25 17 8 26 16 10 60 23 SEE DETAIL “A” 7 9 DETAIL “A” 22 59 27 15 11 SEE DETAIL “B” 28 11 ASM 54 48 12 13 46 30 45 49 ASM 50 29 57 31 32 51 43 44 52 33 1 34 42 61 38 DETAIL “B” 40 41 47 2 39 37 36 35 56 53 1 APPLY THREAD LOCK (LOCTITE 242 BLUE OR EQUIVALENT). 2 PART OF ENGINE ASSEMBLY.
HPLA/HPHA-SERIES 46" TROWEL — QUICK-PITCH™ HANDLE ASSY. QUICK-PITCH HANDLE ASSY. NO. 1 2 3 4 5 6 7 * 8 * 9 * 10 * 11 12 * 13 * 14 15 16 17 18 19+ 20+ 21+ 22+ 23+ 24 25■ 26 27 28 29 30 31 32 33 34 35# 36# 37# 38 39 40 PART NO. 20463 20774 20478 12556 20526 21171 20527 20389 1746 12405 1729 1706 20437 4568 1711 1719 20439 20438 1731 20443 1709 20269 20276 20856 1602 20988 20514 20297 2942 1715 20270 1735 21017 1662 20275 1118 20279 1493 1737 1733 PART NAME QTY.
HPLA/HPHA-SERIES 46" TROWEL — QUICK PITCH™ HANDLE ASSY. 2 3 25 55 6 5 1 18 20 19 26 21 14 58 4 10 24 25 17 8 26 16 10 60 23 SEE DETAIL “A” 7 9 DETAIL “A” 22 59 27 15 11 SEE DETAIL “B” 28 11 ASM 54 48 12 13 46 30 45 49 ASM 50 29 57 31 32 51 43 44 52 33 1 34 42 61 38 DETAIL “B” 40 41 47 2 39 37 36 35 56 53 1 APPLY THREAD LOCK (LOCTITE 242 BLUE OR EQUIVALENT). 2 PART OF ENGINE ASSEMBLY.
HPLA/HPHA-SERIES 46" TROWEL — QUICK PITCH™ HANDLE ASSY. QUICK PITCH HANDLE ASSY. NO. 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 PART NO. 1736 1718 1732 1717 12642 1758 20845 21173 20392 10133 1116 20390 20293 20280 20421 A8638 20271 21172 PART NAME QTY. REMARKS DECAL, ARROW 1 NUT, QP TRIM CTRL ADJ 1 BOLT, STRIPPER 3/8 X 1/2 1 SCREW, QP TRIM ADJUSTMENT 1 TUBE, MAIN HANDLE 1 DECAL, PATENT QP 1 SWIVEL, ENGINE THROTTLE CABLE 1 HOUSING, THROTTLE CABLE 74” 1 DECAL, CAUTION, LIFT HANDLE .....
HPLA/HPHA-SERIES 46" TROWEL — 4-BLADE SPIDER ASSY. 4-BLADE SPIDER ASSY. PAGE 50 — HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HPLA/HPHA-SERIES 46" TROWEL — 4-BLADE SPIDER ASSY. 4-BLADE SPIDER ASSY. NO. 1 * 2 * 3 * 4 * 5% 6% 7% 8% 9% 10% 11% 12% 13% 14% 15% 16% 17% 18% 19% 20% 21 22 # * 23 PART NO. 12208 12778 10793 1154A 1157A 0164B 1875 1876 0105 0161C 1162A 2827 1163 4164 1316 1161 1322 1456 1167A 0166A 1490 1471 10968 PART NAME QTY. REMARKS WEAR RING 1 FLANGE BEARING 1 THRUST COLLAR ............................................................. 1 ...........
HPLA/HPHA-SERIES 46" TROWEL — GEARBOX & ENGINE MOUNTS ASSY. GEARBOX & ENGINE MOUNTS ASSY. 1 2 1 36 37 12 13 3 8 4 35 5 4 6 34 7 38 11 9 7 6 14 2 10 15 17 31 32 16 18 30 6 19 20 GEARBOX OIL 28 0Z. QTY. 1 19 33 39 GEARBOX ASSEMBLY 40 GASKET/SEAL KIT 41 BEARING KIT GEARBOX REQUIRES 28 OZ. OF LUBRICATING OIL FOR OPERATION. 18 32 31 22 1 APPLY THREAD LOCK (LOCTITE 242 BLUE OR EQUIVALENT). 2 APPLY SEALANT (LOCTITE 572 OR EQUIVALENT). 3 TORQUE TO 15 LB/FT.
HPLA/HPHA-SERIES 46" TROWEL — GEARBOX & ENGINE MOUNTS ASSY. GEARBOX & ENGINE MOUNTS ASSY. NO. 1% * 2% 3% 4% * 5% PART NO.
HPLA/HPHA-SERIES 46" TROWEL — GEARBOX & ENGINE MOUNTS ASSY. GEARBOX & ENGINE MOUNTS ASSY. 1 2 1 36 37 12 13 3 8 4 35 5 4 6 34 7 38 11 9 7 6 14 2 10 15 17 31 32 16 18 30 6 19 20 GEARBOX OIL 28 0Z. QTY. 1 19 33 39 GEARBOX ASSEMBLY 40 GASKET/SEAL KIT 41 BEARING KIT GEARBOX REQUIRES 28 OZ. OF LUBRICATING OIL FOR OPERATION. 18 32 31 22 1 APPLY THREAD LOCK (LOCTITE 242 BLUE OR EQUIVALENT). 2 APPLY SEALANT (LOCTITE 572 OR EQUIVALENT). 3 TORQUE TO 15 LB/FT.
HPLA/HPHA-SERIES 46" TROWEL — GEARBOX & ENGINE MOUNTS ASSY. GEARBOX & ENGINE MOUNTS ASSY. NO. 30 31 32 33 34 35 36 37 38 39 40 41 PART NO. 1150 20802 20803 20801 20797 1245 10700 1948 1247 20407 21046 21047 PART NAME QTY. REMARKS ARM, YOKE 1 RING, SNAP, TRUARC 5100-37 OR EQUIV. 2 SPACER, .50 OD X .40 ID X 0.25L 2 PIN, YOKE 1 STATIONARY GUARD RING 1 BUSHING, GUARD RING 4 FRONT ENGINE MOUNT 1 REAR ENGINE MOUNT 1 GROMMET 1/4 X .875 ID X 1-5/8 OD 4 GEARBOX ASSY. ...............................................
HPLA/HPHA-SERIES 46" TROWEL — ENGINE ASSY. ENGINE ASSY. PAGE 56 — HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HPLA/HPHA-SERIES 46" TROWEL — ENGINE ASSY. ENGINE ASSY. NO. PART NO. 1 1388 2 1391 3 0161C 4 0300B 5 20845 6 0310 7 1488 8 1475 9 1127 9 0740 10 0250 11 0261 11 0152 3 12 1335 13 0181B 14 2577 15 1284 16 0166A 17 20982 18 1480 19 1948 20 10700 21 1245 22 1247 23 * 0252 24 * 0456 0251 25 * 26 * 0458 27 * B1766 28 * 0855 0253 29 * 30 * 1868 31 PART NAME QTY. REMARKS ENGINE 11HP HONDA GX340K1QAP2 1 HHCS 5/16-24 x 1-1/2" 4 LOCK WASHER 5/16" 4 FLAT WASHER 5/16" 4 SWIVEL, THROTTLE CABLE 1 SQUARE KEY 1/4X1/4X1.
HPLA/HPHA-SERIES 46" TROWEL — GUARD RING ASSY. GUARD RING ASSY. PAGE 58 — HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HPLA/HPHA-SERIES 46" TROWEL — GUARD RING ASSY. GUARD RING ASSY. NO. 1 2 PART NO. 20811 1940 PART NAME GUARD RING ASSEMBLY DECAL QTY. 1 1 REMARKS HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV.
HPLA/HPHA-SERIES 46" TROWEL — STABILIZER RING ASSY. STABILIZER RING ASSY. SEE DETAIL “A” 5 4 DETAIL “A” 1 4 3 1 1 2 1 APPLY LOCTITE 242 BLUE OR EQUIVALENT. PAGE 60 — HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HPLA/HPHA-SERIES 46" TROWEL — STABILIZER RING ASSY. STABILIZER RING ASSY. NO PART NO 1 0161C 2 1237 3 1723 4 6014C 5 1483 PART NAME WASHER, LOCK, 5/16 MED SCREW, SCH 5/16-18 X 7/8, NYL, NP ROD END, 5/16-24 MALE NUT, HEX FINISH 5/16-24 RING, STABILIZER, 16-1/2" ARM QTY. 4 4 4 8 1 REMARKS HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV.
HPLA/HPHA-SERIES 46" TROWEL — BLADES & ARM ADJ. FIXTURE ASSY. (OPTIONS) BLADES & ARM ADJ. FIXTURE ASSY. PAGE 62 — HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HPLA/HPHA-SERIES 46" TROWEL — BLADES & ARM ADJ. FIXTURE ASSY. BLADES & ARM ADJ. FIXTURE ASSY. NO. PART NO. PART NAME QTY. REMARKS 20 COMBO FLOAT & FINISH BLADE ................. 4 ........ CONTACT UNIT SALES DEPT./ACC. ITEM 20 ENDURO COMBO FLOAT &FINISH BLADE . 4 ........ CONTACT UNIT SALES DEPT./ACC. ITEM 21 FLOAT BLADE ............................................... 4 ........ CONTACT UNIT SALES DEPT./ACC. ITEM 22 FINISH BLADE ............................................... 4 ........
HPLA/HPHA-SERIES 46" TROWEL — LIFTING BAIL ASSY. (OPTION) LIFTING BAIL ASSY. (OPTION) PAGE 64 — HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HPLA/HPHA-SERIES 46" TROWEL — LIFTING BAIL ASSY. (OPTION) LIFTING BAIL ASSY. (OPTION) NO. PART NO. PART NAME QTY. REMARKS 1 LIFTING BAIL ASSY. ........................... 1 ............ CONTACT UNIT SALES DEPT./ACC. ITEM 2 10229 HHCS 5/16-24X1" 4 3 0161C LOCK WASHER 5/16" 4 4 LIFTING BAIL ASSY. ........................... 1 ............ CONTACT UNIT SALES DEPT. /ACC.
HONDA GX-340K1QAP2 ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. PAGE 66 — HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX-340K1QAP2 ENGINE — AIR CLEANER ASSY. NO. 1 2 3 * 4 5 * 6 7# 8# 9 11 12 13 14 PART NO. 16271ZE2000 17210ZE3505 17218ZE3505 17231ZE3W00 17232891000 17235ZH9N00 17238ZE2310 17239ZE1000 17410ZH9N00 90203ZA0800 90325044000 934040602008 9405006000 PART NAME QTY. REMARKS GASKET, ELBOW 1 ELEMENT, AIR CLEANER ............................... 1 ................
HONDA GX-340K1QAP2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. PAGE 68 — HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX-340K1QAP2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. NO. 1 2 3 4 5 6 * 7 8 9 10 11 12 13 14 15 16 17 PART NO. 14100ZE3020 14410ZE3013 14431ZE2010 14441ZE2000 14451ZE1013 14568ZE1000 14711ZE3000 14721ZE3000 14751ZE2003 14771ZE2000 14773ZE2000 14775ZE2010 14781ZE2000 14791ZE2010 90012ZE0010 90206ZE1000 12209ZE8003 PART NAME QTY. REMARKS CAMSHAFT ASSEMBLY ................................. 1 ................
HONDA GX-340K1QAP2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. PAGE 70 — HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX-340K1QAP2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. NO. 1 * 2 * 3 * 4 * 5 * 6 * 7 * 8 * 9 * 10 * 11 * 12 * 13 * 14 15 16 17 18 19 * 20 * 21 * 22 * 23 * 24 * 25# 26 * 26 * 26 * 27 * PART NO.
HONDA GX-340K1QAP2 ENGINE — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. PAGE 72 — HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX-340K1QAP2 ENGINE — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. NO. 1 2 3 4 5 7 * 8% 9$ 10#♣$ 11#♣$ 12#♣$ 13♣$ 15♣$ 16 17$ 18♣$ 19 20$ 21$ PART NO. 06165ZE3000 11300ZE3602 11381ZE3801 15600ZG4003 15600735003 15625ZE1003 15625ZE1003 16510ZE3000 16511ZE8000 16512ZE3000 16513ZE2000 16531ZE2000 90602ZE1000 90701HC4000 91201ZE3004 9410106800 957010804000 961006202000 961006207000 PART NAME QTY. REMARKS GOVERNOR KIT (OPTIONAL) ......................... 1 ................ INCLUDES ITEMS W/♣ COVER ASSY.
HONDA GX-340K1QAP2 ENGINE — CONTROL ASSY. CONTROL ASSY. NO ART WORK AVAILABLE PAGE 74 — HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX-340K1QAP2 ENGINE — CONTROL ASSY. CONTROL ASSY. NO. 2 3 4 5 6 8 9 10 11 12 14 15 16 17 18 19 20 21 22 23 24 PART NO.
HONDA GX-340K1QAP2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL PAGE 76 — HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX-340K1QAP2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. NO. 1 2 3 6 7 9 * 10 * 11 12 13 14 15 16 * 17 18 PART NO. 12000ZE3816 15510ZE2043 16541ZE3010 90131896650 90446KE1000 91201ZE3004 91201ZE9003 91353671003 9405010000 9410912000 9425110000 957010601200 961006202000 90013883000 34150ZH7003 PART NAME QTY. REMARKS CYLINDER ASSEMBLY ................................... 1 ................ INCLUDES ITEMS W/ * SWITCH ASSEMBLY OIL LEVEL 1 SHAFT, GOVERNOR ARM 1 BOLT, DRAIN PLUG 2 WASHER 8.2X17X0.
HONDA GX-340K1QAP2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 78 — HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX-340K1QAP2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. NO. 1 2 * 3 * 4 * 5 6 7 8 10 11 12 13 14 15 16 PART NO. 12200ZF6W00 12204ZE2306 12205ZE2305 12216ZE2300 12251ZE3W00 12310ZE3791 12315ZE3840 12391ZE2020 90014ZE2000 90042ZE8000 92900080320E 90441ZE2010 9430112200 957011008000 9807956846 PART NAME QTY. REMARKS CYLINDER HEAD ............................................ 1 ................ INCLUDES ITEMS W/ * GUIDE, VALVE OS (OPTIONAL) 1 GUIDE, EX.
HONDA GX-340K1QAP2 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PAGE 80 — HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX-340K1QAP2 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. NO. 1 5 6 7 * PART NO. 13310ZE3601 13351ZE3010 90745ZE2600 961006207000 PART NAME QTY. REMARKS CRANKSHAFT, Q- TYPE ................................. 1 ................ INCLUDES ITEM W/ * WEIGHT, BALANCER 1 KEY 6.3X6.3X43 1 BEARING, RADIAL BALL 6207 1 HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV.
HONDA GX-340K1QAP2 ENGINE — FAN COVER ASSY. FAN COVER ASSY. PAGE 82 — HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX-340K1QAP2 ENGINE — FAN COVER ASSY. FAN COVER ASSY. NO. 1 2 3 5 7 8 PART NO. 16731ZE2003 19610ZE3010ZB 19631ZE3W00 36100ZH7003 90013883000 90684ZA0601 PART NAME CLIP, TUBE COVER, FAN *NH1* (BLACK) SHROUD SWITCH ASSEMBLY, ENGINE STOP BOLT, FLANGE 6X12 (CT200) CLIP, WIRE HARNESS QTY. 1 1 1 1 6 1 REMARKS HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV.
HONDA GX-340K1QAP2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. PAGE 84 — HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX-340K1QAP2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. NO. 1 2 4 6 7 PART NO. 19511ZE3000 28450ZE3W11 31100ZE3701 90201ZE3V00 90741ZE2000 PART NAME FAN, COOLING PULLEY, STARTER (SCREEN GRID) FLYWHEEL NUT, SPECIAL 16MM KEY, SPECIAL WOODRUFF 25X18 QTY. 1 1 1 1 1 REMARKS HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV.
HONDA GX-340K1QAP2 ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 86 — HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX-340K1QAP2 ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. NO. 1 2 3 5 6 * 7 10 11 12 13 14 PART NO. 16854ZH8000 16955ZE1000 17510ZE3010ZB 17620ZH7023 17631ZH7993 17672ZE2W01 91353671003 9405008000 950014500360M 9500202080 957010802500 PART NAME QTY. REMARKS RUBBER, SUPPORTER 107MM 1 JOINT FUEL TANK 1 TANK, FUEL "NH1" (BLACK) 1 CAP, FUEL FILLER .......................................... 1 ................ INCLUDES ITEM W/ * GASKET, FUEL FILLER CAP 1 FILTER, FUEL 1 O- RING 13.5X1.
HONDA GX-340K1QAP2 ENGINE — IGNITION COIL ASSY. IGNITION COIL ASSY. PAGE 88 — HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX-340K1QAP2 ENGINE — IGNITION COIL ASSY. IGNITION COIL ASSY. NO. 1 2 4 7 10 PART NO. 30500ZE2023 30700ZE1013 31512ZE2000 36101ZE2701 90015883000 PART NAME COIL ASSEMBYL, IGNITION CAP ASSEMBLY, NOISE SUPPRESSOR GROMMET, WIRE WIRE, STOP SWITCH 430MM BOLT, FLANGE 6X28 QTY. 1 1 1 1 2 REMARKS HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV.
HONDA GX-340K1QAP2 ENGINE — MUFFLER ASSY. MUFFLER ASSY. PAGE 90 — HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX-340K1QAP2 ENGINE — MUFFLER ASSY. MUFFLER ASSY. NO. 1 2 3 4 5 6 8 9 11 12 13 14 15 PART NO. 18310ZE3W00 18320ZE3W01 18323ZE3W40 18330ZE2W00 18331ZE3810 18333ZF6W01 18355ZE3010 18381ZE2W10 90013883000 90050ZE1000 90055ZE1000 93500060060B 9405008000 PART NAME MUFFLER PROTECTOR, MUFFLER PROTECTOR, EXHAUST PIPE PIPE, EXHAUST CAP, MUFFLER GASKET, EXHAUST PIPE ARRESTER, SPARK GASKET, MUFFLER (ARRESTER) BOLT, FLANGE 6X12 (CT200) SCREW, TAPPING 5X8 SCREW, TAPPING 4X6 SCREW, PAN 6X6 NUT, FLANGE 8MM QTY.
HONDA GX-340K1QAP2 ENGINE — PISTON ASSY. PISTON ASSY. PAGE 92 — HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX-340K1QAP2 ENGINE — PISTON ASSY. PISTON ASSY. NO. 1 1 1 1 2 2 2 2 3 4 4 5 6 PART NO. 13010ZE3003 13011ZE3003 13012ZE3003 13013ZE3003 13101ZE3W00 13102ZE3W00 13103ZE3W00 13104ZE3W00 13111ZF6000 13200ZE3010 13200ZE3315 90001ZE8000 90601ZE3000 PART NAME QTY. RING SET, PISTON (STANDARD) 1 RING SET, PISTON (OS 0.25 1 RING SET, PISTON (OS 0.50) 1 RING SET, PISTON (0.75) 1 PISTON STANDARD 1 PISTON (OS 0.25) 1 PISTON (OS 0.50) 1 PISTON (0.75) 1 PIN, PISTON 1 ROD ASSEMBLY, CONNECTING (STD.
HONDA GX-340K1QAP2 ENGINE — RECOIL STARTER ASSY. RECOIL STARTER ASSY. PAGE 94 — HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX-340K1QAP2 ENGINE — RECOIL STARTER ASSY. RECOIL STARTER ASSY. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PART NO. 28400ZE3W01ZB 28410ZE3W01ZB 28421ZE3W01 28422ZE2W01 28441ZE2W01 28442ZE2W01 28443ZE2W01 28444ZE2W01 28445ZE2W01 28461ZE2W02 28462ZE3W01 28469ZE2W01 90004ZE2W01 957010600800 PART NAME QTY. REMARKS STARTER ASSY., RECOIL "NH1" .................. 1 ................ BLACK CASE, RECOIL STARTER "NH1" .................... 1 ................
HONDA GX-340K1QAP2 ENGINE — LABELS ASSY. LABELS ASSY. PAGE 96 — HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX-340K1QAP2 ENGINE — LABELS ASSY. LABELS ASSY. NO. 1 3 4 6 9 PART NO. 87521ZE3W01 87522ZH9000 87528ZE2810 87532ZH8810 89218ZE1000 PART NAME EMBLEM LABEL, CAUTION MARK, CHOKE (EXTERNAL) MARK, OIL ALERT (E) WRENCH, SPARK PLUG QTY. 1 1 1 1 1 REMARKS HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV.
TERMS AND CONDITIONS OF SALE — PARTS PAYMENT TERMS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Multiquip reserves the right to quote and sell direct to Government agencies, and to Original Equipment Manufacturer accounts who use our products as integral parts of their own products. a. SPECIAL EXPEDITING SERVICE Terms of payment for parts are net 30 days.
NOTE PAGE HPLA/HPHA-SERIES 46" WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV.
OPERATION AND PARTS MANUAL HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING UNITED STATES Multiquip Corporate Office 18910 Wilmington Ave. Carson, CA 90746 Contact: mq@multiquip.com MQ Parts Department Tel. (800) 421-1244 Fax (800) 537-3927 Mayco Parts 800-427-1244 310-537-3700 Fax: 800-672-7877 Fax: 310-637-3284 Warranty Department 800-306-2926 310-537-3700 Fax: 800-672-7877 Fax: 310-637-3284 Service Department 800-421-1244, Ext. 279 310-537-3700, Ext.