OPERATION AND PARTS MANUAL SideWinder MODEL HS81A CUT-OFF SAW Revision #2 (07/26/10) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
Engine exhaust and some of its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Some examples of these chemicals are: Leadfromlead-basedpaints. Crystallinesilicafrombricks. Cementandothermasonryproducts. Arsenicandchromiumfromchemically treatedlumber.
NOTE PAGE
HS81A CUT-OFF SAW — TABLE OF CONTENTS MULTIQUIP — HS81A CUT-OFF SAW Proposition 65 Warning ............................................. 2 Table Of Contents ..................................................... 4 Parts Ordering Procedures ....................................... 5 Safety Message Alert Symbols .............................. 6-7 Rules For Safe Operation .................................... 8-11 Specifications (Saw/Engine) ................................... 12 Decal Placement .................
www.multiquip.com PARTS ORDERING PROCEDURES Ordering parts has never been easier! Choose from three easy options: Order via Internet (Dealers Only): Best Deal! Effective: January 1st, 2006 If you have an MQ Account, to obtain a Username and Password, E-mail us at: parts@multiquip. com. Order parts on-line using Multiquip’s SmartEquip website! N View Parts Diagrams N Order Parts N Print Specification Information To obtain an MQ Account, contact your District Sales Manager for more information.
HS81A CUT-OFF SAW — SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others. This Owner's Manual has been developed to provide complete NOTE instructions for the safe and efficient operation of the MULTIQUIP MODEL HS81A CUT-OFF SAW.
HS81A CUT-OFF SAW — SAFETY MESSAGE ALERT SYMBOLS Accidental Starting ALWAYS place the engine ON/OFF switch in the OFF position, when the saw is not in use. Over Speed Conditions NEVER tamper with the factory settings of the engine governor or settings. Personal injury and damage to the engine or equipment can result if operating in speed ranges above maximum allowable. Guards and Covers In Place NEVER operate the saw without blade guards and covers in place.
HS81A CUT-OFF SAW — RULES FOR SAFE OPERATION WARNING - Read This Manual Failure to follow instructions in this manual may lead to Serious Injury or even Death. This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the Multiquip HS81A Cut-off Saw. SAFETY ■ DO NOT operate or service this equipment before reading this entire manual.
HS81A CUT-OFF SAW — RULES FOR SAFE OPERATION General Safety ■ ALWAYS read, understand, and follow procedures in Operator's Manual before attempting to operate this equipment. ■ ALWAYS hold the saw with both hands when the engine is running. Use a firm grip with thumbs and fingers encircling the handles. ■ ALWAYS keep all parts of the body away from the cutting-off blades when the engine is running. ■ ALWAYS keep the handles dry, clean and free of oil or fuel.
HS81A CUT-OFF SAW — RULES FOR SAFE OPERATION ■ NEVER leave the machine unattended while running. Diamond Blade Safety ■ NEVER run the engine without the air filter. Severe engine damage could occur. ■ Use appropriate steel centered diamond blades manufactured for use on concrete saws. ■ NEVER wear jewelry or loose fitting clothing that may snag on the controls or moving parts, this can cause a serious injury. ■ NEVER operate this saw without the blade guard, or other protective guards in place.
HS81A CUT-OFF SAW — RULES FOR SAFE OPERATION EMERGENCIES ■ ALWAYS know the location of the nearest fire extinguisher. ■ ALWAYS know the location of the nearest first aid kit. ■ In emergencies always know the location of the nearest phone or keep a phone on the job site. Also know the phone numbers of the nearest ambulance, doctor, and fire department. This information will be invaluable in the case of an emergency. HS81A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV.
HS81A CUT-OFF SAW — SPECIFICATIONS Table 1. HS81A Cut-off Saw Specifications 5 0 x 1 8 x 3 3 in (1270 x 457 x 838 mm) Dimensions (Shipping) LxWxH Weight (without blade) 25.1 lbs. (11.4 kg) Blade Size 12 in. (305 mm) 14 in. (356 mm) Maximum Cut Depth 4 in. (100 mm) 5 in. (127 mm) Arbor Size 1 in. (25.4 mm) Cutting Arm Reversible Table 2. HS81A Power Source Specifications Engine Type Two-Stroke, Single Cylinder, Air cooled Displacement 4.92 cu. in. (80.7 cc.
HS81A CUT-OFF SAW — DECAL PLACEMENT Machine Operation And Safety Decals The HS81A CUT-OFF SAW is equipped with a number of operation and safety decals (Figure 1). Should any of these decals become unreadable, replacements can be obtained from your dealer. P/N DCL 230 P/N DCL 231 P/N DCL 232 P/N DCL 234A P/N DCL 161 Figure 1. Safety Decals HS81A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV.
HS81A CUT-OFF SAW — CONTROLS & COMPONENTS 1 2 3 4 7 6 5 12 11 10 9 8 Figure 2. HS81A Cut-off Saw Components 1 Figures 2 and 3 shows the location of the basic controls or components for the Multiquip Model HS81A Cut-off Saw. Listed below is a brief explanation of each control or component. 1. Air Filter – Prevents dirt and debris from entering the engine air intake. Check filter periodically and keep cleaned or replace when necessary. NEVER run engine with a dirty air filter. 2.
HS81A CUT-OFF SAW — CONTROLS & COMPONENTS 14 13 15 16 22 21 20 19 18 17 Figure 3. HS81A Cut-off Saw Components 2 13. Blade Guard – Covers saw blade. 14. Front Handle – When lifting or carrying of the saw is required, use this handle. 15. Throttle Lock Lever – Using your thumb, press this lever downward and squeeze the trigger lever to lock the throttle in place. This will allow the saw blade to rotate at maximum speed without having to hold the trigger lever.
HS81A CUT-OFF SAW — BLADE INSTALLATION INSTRUCTIONS The Multiquip Side Winder Cut-Off Saw comes with a Tool Kit (Figure 4) that assists you with day to day operations. You will need these tools for the assembly of your saw. Item is a versatile screwdriver/wrench that accommodates common bolt/screw and nut head sizes of your saw. Item is the wrench necessary to accommodate various allen screws. Figure 4.
HS81A CUT-OFF SAW — WATER KIT INSTALLATION INSTRUCTIONS Contents of Water Kit The contents of the Water Kit cannot be purchased seperately. See Water Kit Assembly in Parts Section of this manual for Water Kit part number. Hose Clamp Socket Head Cap Screw w/ Washer Quick Disconnect Fitting Water Hose Hex Key Tool (Included with Tool Kit) Figure 9.
HS81A CUT-OFF SAW — BLADES PREPARATION / PRE-INSPECTION 1. Read and fully understand this manual, the safety instructions in particular, and the engine manufacturer's manual supplied with the saw. 2. Select the correct blade for each application. If abrasive blades are used, MAKE CERTAIN they are designed for use on a concrete floor saw. They must be reinforced and have a hole for the driving pin. When wet cutting with an abrasive blade, MAKE CERTAIN the blade is intended for wet cutting.
HS81A CUT-OFF SAW — INITIAL START-UP/OPERATION INITIAL START-UP CAUTION DO NOT attempt to operate the saw until the Safety, General Information and Inspection sections of this manual have been read and thoroughly understood. Depending on engine manufacturer, operating steps may vary. See engine manufactures operating manual. 90 OCTANE PREMIUM UNLEADED GASOLINE CAUTION NEVER operate the saw in a confined area or enclosed area structure that does not provide ample free flow of air.
HS81A CUT-OFF SAW — INITIAL START-UP/OPERATION 7. Grasp the starter grip and slowly pull it out.The resistance becomes the hardest at a certain position, corresponding to the compression point. Pull the starter grip briskly and smoothly for starting. 8. If the engine has started, slowly return the choke lever to the "OPEN" position. If the engine has not started repeat steps 1 through 9. 9. Squeeze the throttle lever trigger to release it from the halfthrottle position. 10.
HS81A CUT-OFF SAW — MAINTENANCE V-Belt Changing Procedure N Remove the 2 hex nuts and hex screw and washer to gain access to the V-belt on the clutch side. Remove V-belt cover . Figure 14. Belt Guard Cover Removal Remove the 2 hex nuts and hex screw and guard adjustment knob to gain access to the V-belt on the spindle side. Remove the Cover Guard . Figure 15.
HS81A CUT-OFF SAW — MAINTENANCE V-Belt Changing Procedure (continued) Re-tension the V-belt by turning the belt tensioning cam . The V-belt should remain in tension. Fully tighten the three nuts that lock the V-belt into the proper tensioning position. Figure 18. Reversing the Cutting Arm Re-install the guard and V-belt covers. Fully tighten the two cap screws and reinstall the adjustment knob . N Figure 19.
HS81A CUT-OFF SAW — MAINTENANCE Reversing the Cutting Arm Procedure NOTE This assembly procedure permits the operator to reorient the cutting blade closer to a wall, column and/or object. The Multiquip Side Winder Cut-Off Saw comes with a Tool Kit (Figure 20) that assist you with day to day operations. You will need these tools for the maintenance of your saw. Item is a versatile screwdriver/wrench that accommodates common bolt/screw and nut head sizes of your saw.
HS81A CUT-OFF SAW — MAINTENANCE Reversing the Cutting Arm Procedure (continued) Reverse the cutting arm 180 degrees as shown in the Figure 23, and re-tension the V-belt by turning the belt tensioning cam . The V-belt should remain in tension. Fully tighten the three nuts that lock the V-belt into the proper tensioning position. Figure 23. Reversing the Cutting Arm Re-attach the cover guard with the 2 cap screws , and reconnect the guard adjustment knob Figure 24.
HS81A CUT-OFF SAW — MAINTENANCE (AIR/FUEL FILTER) Air/Fuel Filter Maintenance Procedures Check the fuel filter located inside the fuel tank periodically for dirt/debris build up. It is recommended to change the fuel filter every 50 tanks of fuel. This engine is a 2-stroke gasoline engine requiring a specific fuel to oil mixture of 25:1(4%). It is recommended to use an unleaded gasoline rated at 92 octane (premium) with an oil for use on 2-stroke engines only. See Figure 13. Figure 25.
HS81A CUT-OFF SAW — TROUBLESHOOTING (BLADE) TABLE 3. BLADE TROUBLESHOOTING SYMPTOM Blade slows or stops cutting. Blade does not cut straight and/or true. Blade discoloring, crackling and/or wearing excessively. POSSIBLE PROBLEM SOLUTION Blade too hard for the material being cut? Consult Dealer or Multiquip for correct blade. Try cutting very soft material (sandstone, silica brick, cinder block) to "Redress" the blade. Engine torque diminished because of loose V-belt? Tighten and/or replace V-Belts.
HS81A CUT-OFF SAW — TROUBLESHOOTING (ENGINE) TABLE 4. TROUBLESHOOTING (ENGINE) SYMPTOM Difficult to star t, "fuel is available, but no SPARK at spark plug". Difficult to star t, "fuel is available, and SPARK is present at the spark plug". Difficult to star t, "fuel is available, spark is present and compression is normal". Difficult to star t, "fuel is available, spark is present and compression is low". POSSIBLE CAUSE SOLUTION Spark plug bridging? Check gap, insulation or replace spark plug.
HS81A CUT-OFF SAW — TROUBLESHOOTING (ENGINE) TABLE 4. TROUBLESHOOTING (ENGINE, CONTINUED) SYMPTOM POSSIBLE CAUSE Air cleaner not clean? SOLUTION Clean or replace air cleaner. Check float adjustment. "Weak in power" compression is proper and does not misfire. Improper fuel level in carburetor? Rebuild carburetor. Defective spark plug? Clean or replace spark plug. Improper spark plug gap? Set to proper gap. Water in fuel system? Flush fuel system and replace with correct type fuel.
HS81A CUT-OFF SAW — FILTER KITS For Side Winder HS Series Cut-Off Saws HS81A DRY FILTER KITS HS81FK1A HS81FK5A HS81FK10A [ Includes 1 ea.] HS52010451R- Foam Filter HS018600125R- Paper Filter HS018600056AR - Inner Filter [ Includes 5 ea.] HS52010451R - Foam Filter HS018600125R - Paper Filter HS018600056AR - Inner Filter [ Includes 10 ea.
HS81A CUT-OFF SAW — EXPLANATION OF PARTS SECTION REMARKS The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. NOTICE The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availability of the parts listed. SAMPLE PARTS LIST NO. 1 2% 2% 3 4 PART NO. PART NAME QTY. REMARKS 12345 BOLT..............
HS81A CUT-OFF SAW — SUGGESTED SPARE PARTS SUGGESTED SPARE PARTS HS81A SIDEWINDER CUT-OFF SAW 1 to 3 Units Qty. P/N Description 1 ............ HS52012047A ....... STARTER ASSEMBLY 3 ............ HS098000079R .... ROPE, STARTER 1 ............ HS50140060 ......... HANDLE, ROPE 1 ............ HS098000060A ..... SPRING & CASE, STARTER 6 ............ HS3055118 ........... SPARK PLUG 1 ............ HS097000132 ....... CLUTCH ASSEMBLY 1 ............ HS52022005 ......... FUEL CAP, W/O-RING 3 ............
HS81A CUT-OFF SAW — MUFFLER ASSY. MUFFLER ASSY. PAGE 32 — HS81A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV.
HS81A CUT-OFF SAW — MUFFLER ASSY. MUFFLER ASSY. NO. 1 * 2 * 3 * 4 * 5 * 6 * 7 * 8 * 9 10 * 11 PART NO. HS3801052 HS3033074 HS097000342A HS3801045 HS005100913B HS3833073 HS098000133 HS098000132 HS52010441 HS097000092A HS097000094A PART NAME QTY. REMARKS SCREW 3 WASHER 5 COVER, MUFFLER 1 SCREW 2 SCREW 2 WASHER 2 DEFLECTOR, MUFFLER 1 SCREEN 1 MUFFLER ASSEMBLY ............................. 1 ......... INCLUDES ITEMS W/ * SCREW 2 GASKET, MUFFLER 1 HS81A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV.
HS81A CUT-OFF SAW — RECOIL START ASSY. RECOIL START ASSY. PAGE 34 — HS81A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV.
HS81A CUT-OFF SAW — RECOIL START ASSY. RECOIL START ASSY. NO. 14 * 15 * 16 * 17 * 18 * 19 * 20 * 21 * 22 * 23 24 25 * 26 * 27 * PART NO. HS50140060 HS098000079R HS098000060A HS3960017 HS3960116 HS50140055 HS3918006 HS52010439B HS3908036 HS099900296R HS52012047A HS52010410 HS50140056 HS52010404 PART NAME QTY. REMARKS HANDLE, STARTER ROPE 1 ROPE, STARTER 1 SPRING AND CASE, STARTER 1 SCREW 4 SCREW 1 COVER 1 WASHER 1 PULLEY, STARTER 1 SCREW 1 SCREW 4 STARTER ASSEMBLY .............................. 1 ........
HS81A CUT-OFF SAW — CRANKCASE ASSY. CRANKCASE ASSY. PAGE 36 — HS81A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV.
HS81A CUT-OFF SAW — CRANKCASE ASSY. CRANKCASE ASSY. NO. 3 11 12 16 18 19 * 20 21 22 23 24 26 28 30 31 37 * 40 41 PART NO. HS52010312 HS09990268 HS52020040 HS097000009A HS52012018 HS3034012 HS099900110 HS52010117 HS3833073 HS006100303 HS097000080BR HS3801015 HS005100987 HS097000057 HS006000102 HS3023008 HS52010078 HS3049030 PART NAME QTY. REMARKS PLATE 1 RUBBER CLAMP 1 CAP 1 GASKET, CRANKCASE 1 CRANKCASE W/ BEARING ASSY ........................ 1 .........
HS81A CUT-OFF SAW — V-BELT COVER (CLUTCH SIDE) ASSY. V-BELT COVER (CLUTCH SIDE) ASSY PAGE 38 — HS81A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV.
HS81A CUT-OFF SAW — V-BELT COVER (CLUTCH SIDE) ASSY. V-BELT COVER (CLUTCH SIDE) ASSY. NO. 25 31 34 40 41 42 43 44 PART NO. HS52010430 HS50010148R HS3833073 HS3806021A HS3801037 HS52010023 HS3916008R HS006000300 PART NAME V-BELT COVER, (CLUTCH SIDE) NUT WASHER SCREW SCREW GUARD, BELT INNER WASHER BUSHING QTY. 1 2 3 2 1 1 2 1 REMARKS HS81A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV.
HS81A CUT-OFF SAW — V-BELT COVER (PULLEY) /BLADE GUARD ASSY. V-BELT COVER (PULLEY-SIDE)/BLADE GUARD ASSY. BLADE FLANGE INNER (LIP) 10 2 8 1 34 5 14 BLADE FLANGE OUTER (FLAT) 6 22 7 20 14 46 12 13 14 23 34 4 28 36 12 24 27 11 37 35 15 21 9 6 38 39 16 47 45 17 18 26 32 33 CLUTCH PULLEY 34 19 29 30 PAGE 40 — HS81A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV.
HS81A CUT-OFF SAW — V-BELT COVER (PULLEY) /BLADE GUARD ASSY. V-BELT COVER (PULLEY-SIDE)/BLADE GUARD ASSY. NO. 1 2 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 26 27 28 29 30 32 33 34 35 36 37 38 39 45 46 47 PART NO.
HS81A CUT-OFF SAW — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 42 — HS81A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV.
HS81A CUT-OFF SAW — FUEL TANK ASSY. FUEL TANK ASSY. NO. 4 5 6 8 9 15 * 16 19 28 PART NO. HS52010082 HS093000448 HS018500066 HS018500096 HS50010093 HS099900090 HS52022005 HS4098377 HS50010218 PART NAME QTY. REMARKS BREATHER 1 TUBE 1 FITTING 1 VALVE BODY 1 TUBE 1 0-RING 1 CAP, FUEL ............................................................. 1 ......... INCLUDES ITEM W/ * CLIP 1 FILTER, FUEL 1 HS81A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV.
HS81A CUT-OFF SAW — LIFTING HANDLE AND ROLLER ASSY. LIFTING HANDLE AND ROLLER ASSY. PAGE 44 — HS81A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV.
HS81A CUT-OFF SAW — LIFTING HANDLE AND ROLLER ASSY. LIFTING HANDLE AND ROLLER ASSY. NO. 1 2 3 7 17 18 20 21 22 23 24 25 26 27 29 30 PART NO. HS52010047 HS097000061A HS3072015 HS3801020 HS52020026 HS3960087 HS52010214 HS018100317 HS018100171A HS52010098 HS3072015 HS3801024 HS52010066R HS097000485 HS3833076 HS3806035 PART NAME HANDLE SCREW WASHER SCREW GUARD, FUEL TANK SCREW MAIN ROLLER SUPPORT UPPER SPACER, ROLLER SUPPORT LOWER ROLLER SUPPORT, ROLLER LOWER WASHER SCREW SHOCK ABSORBER FUEL TANK ASSY.
HS81A CUT-OFF SAW — THROTTLE LINKAGE ASSY. THROTTLE ASSY. PAGE 46 — HS81A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV.
HS81A CUT-OFF SAW — THROTTLE LINKAGE ASSY. THROTTLE ASSY NO. 10 11 12 13 14 38% 39 40# PART NO. HS52010092 HS52010077 HS097000028 HS097000024 HS3960040 HS52012044 PART NAME QTY. REMARKS THROTTLE TRIGGER LEVER ............................... 1 ......... INCLUDES ITEM W/ # THROTTLE LOCK LEVER 1 SPRING 1 COVER, HANDLE/TANK 1 SCREW 3 CAP, THROTTLE LINKAGE ................................... 1 ......... NOT SOLD SEPARATELY THROTTLE LINKAGE ............................................ 1 .........
HS81A CUT-OFF SAW — FLYWHEEL COVER ASSY. FLYWHEEL COVER ASSY. PAGE 48 — HS81A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV.
HS81A CUT-OFF SAW — FLYWHEEL COVER ASSY. FLYWHEEL COVER ASSY. NO. 3 4 5 6 PART NO. HS005000361 HS3833080 HS004000142 HS097000019C PART NAME WASHER, FLAT WASHER, LOCK NUT FLANGE, STARTER QTY. 1 1 1 1 REMARKS HS81A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV.
HS81A CUT-OFF SAW — FLYWHEEL ASSY. FLYWHEEL ASSY. PAGE 50 — HS81A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV.
HS81A CUT-OFF SAW — FLYWHEEL ASSY. FLYWHEEL ASSY. NO. 1 2 * PART NO. HS52010136R HS52012027 PART NAME QTY. REMARKS FLYWHEEL ................................................ 1 ......... INCLUDES ITEM W/ * PAWL SET 1 HS81A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV.
HS81A CUT-OFF SAW — IGNITION COIL ASSY. IGNITION COIL ASSY. PAGE 52 — HS81A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV.
HS81A CUT-OFF SAW — IGNITION COIL ASSY. IGNITION COIL ASSY. NO. 7 * 8 * 9 10 11 12 13 15 16 17 18 19 PART NO. HS094600169 HS094600097A HS052010362 HS3916004 HS006000315 HS094000227 HS52010320R HS52010132 HS094500497 HS097000121A HS099900397 HS004000438 PART NAME QTY. REMARKS SPRING SPARK PLUG 1 CAP, SPARK PLUG 1 CABLE WIRE 1 WASHER 2 WASHER 2 SCREW 2 COIL, IGNITION ASSY. ............................. 1 .........
HS81A CUT-OFF SAW — AIR FILTER ASSY. AIR FILTER ASSY. PAGE 54 — HS81A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV.
HS81A CUT-OFF SAW — AIR FILTER ASSY. AIR FILTER ASSY. NO. 1 2 3 3A 4 5 6 7 8 9 10 11 12 13 14 20 21 22 23 24 PART NO. HS52012024B HS330000010 HS018600125 HS099900778A HS018600056AR HS3802002A HS3049007 HS52010014B HS52010451R HS015000100 HS018600090A HS52010059 HS52010016 HS072700182 HS3833073 HS52012004A HS52010060 HS52010041 HS52010018A HS093000468A PART NAME QTY. REMARKS FLANGE, PRE- FILTER, CAP 1 O- RING, FLANGE PRE- FILTER 2 FILTER, AIR (STANDARD) 1 FILTER, AIR (WET CUTTING) .................. 1 ....
HS81A CUT-OFF SAW — CARBURETOR MOUNTING ASSY. CARBURETOR MOUNTINGASSY. PAGE 56 — HS81A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV.
HS81A CUT-OFF SAW — CARBURETOR MOUNTING ASSY. CARBURETOR MOUNTING ASSY. NO. 6 11 12 13 14 15 16 17 18 19 20 21 22 23 PART NO. HS3833073 52010120 094600126 HS61052009B HS097000059A HS52010008A HS097000333 HS3960057 HS2318920B HS015000100 HS52010189 HS097000092A HS098000057 HS098000010 PART NAME WASHER SPRING TUBE SCREW SPRING, MANIFOLD MANIFOLD, OUTER FLANGE SCREW CARBURETOR ASSEMBLY FUEL LINE, CARBURETOR SCREW SCREW SUPPORT, CARBURETOR MANIFOLD, INNER QTY.
HS81A CUT-OFF SAW — CARBURETOR ASSY. CARBURETOR ASSY. PAGE 58 — HS81A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV.
HS81A CUT-OFF SAW — CARBURETOR ASSY. CARBURETOR ASSY. NO. 1 * 2 * 3 4 * 5 * 6 * 7 * 8 * 9 * 10 * 11 * 12 * 13 * 14 * 15 * 16 * 17 * 18 * 19 * 20 * 21 * 22 * 23 * 24 * 25 * 26 * 27 28 PART NO.
HS81A CUT-OFF SAW — CRANKSHAFT / PISTON ASSY. CRANKSHAFT AND PISTON ASSY. PAGE 60 — HS81A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV.
HS81A CUT-OFF SAW — CRANKSHAFT AND PISTON ASSY. CRANKSHAFT AND PISTON ASSY. NO. 1 2 3 4 5 # * 6 # * 7 # * 8 * 9 10 13 14 15 17 25 27 29+ 32 33$ 34 35 36 PART NO. HS3055118 HS005100906A HS3833076 HS52010067 HS098000004 HS094500007 HS007201198 HS098000033B HS50102012B HS097000010B HS006000010 HS098000001 HS094500028R HS094500004 HS099900014 HS097000132 HS004900137B HS097000097 HS52010030 HS52010035 HS52010034 HS52010029R PART NAME QTY.
HS81A CUT-OFF SAW — WATER KIT ASSY. WATER KIT ASSY. PAGE 62 — HS81A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV.
HS81A CUT-OFF SAW — WATER KIT ASSY. WATER KIT ASSY. NO. 1 2 * 3 * 4 * 5 * 6 * 7 * PART NO. HS52012062 HS52010121 HS52010207 NOTE PART NAME QTY. REMARKS WATER KIT ASSY. ....................................................... 1 .......... INCLUDES ITEMS W / * FITTING, QUICK DISCONNECT 1 PLASTIC TIE WRAPS .................................................. 8 .......... NOT SOLD SEPARATELY HOSE CLAMP ............................................................. 1 ..........
HS81A CUT-OFF SAW — CART ASSY. PAGE 64 — HS81A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV.
HS81A CUT-OFF SAW — CART ASSY. CART ASSY. NO. 1# 2# 3# 4 5# 6# 7 8 9 10# 11 12@+> 13@ 14@+ 15 16+ 17 18 19 20% 21% 22 23% 24 25 26 27 28$ 29$ 30 31# 32 33 34# 35 36 37 38 39 40 41 42 43 44 PART NO.
HS81A CUT-OFF SAW — TOOLS TOOLS PAGE 66 — HS81A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV.
HS81A CUT-OFF SAW — TOOLS TOOLS NO. 1 2 3 PART NO. HS4191240 00325 003256PAK PART NAME QTY. REMARKS TOOL KIT 1 SMOKELESS 2-STROKE OIL ....... 1 ............. CAN ONLY BE PURCHASED AS A CASE (QTY 48) SMOKELESS 2-STROKE OIL ....... 1 ............. CAN ONLY BE PURCHASED AS A 6 PACK HS81A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV.
HS81A CUT-OFF SAW — RECOMMENDED DIAMOND BLADES Recommended Diamond Blades For your Side Winder Saw 12" x .125" x 1" - 20mm Arbor Material to Cut Economy Standard Premium Supreme 12GPS 12SBL 12PDHS1 12PDHS2 12GPS 12SBLA 12PDHS1A 12PDHS2A 12GPS 12SBL 12PDHS1H 12PDHS2H 12GPS 12SBL 12PDHS1 12PDHS2 12GPS 12SBLA 12PDHS1A 12PDHS2A 14" x .
TERMS AND CONDITIONS OF SALE — PARTS PAYMENT TERMS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Multiquip reserves the right to quote and sell direct to Government agencies, and to Original Equipment Manufacturer accounts who use our products as integral parts of their own products. a. SPECIAL EXPEDITING SERVICE Terms of payment for parts are net 30 days.
OPERATION AND PARTS MANUAL HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING UNITED STATES Multiquip Corporate Office 18910 Wilmington Ave. Carson, CA 90746 Contact: mq@multiquip.com MQ Parts Department Tel. (800) 421-1244 Fax (800) 537-3927 Mayco Parts 800-427-1244 310-537-3700 Fax: 800-672-7877 Fax: 310-637-3284 Warranty Department 800-306-2926 310-537-3700 Fax: 800-672-7877 Fax: 310-637-3284 Service Department 800-421-1244, Ext. 279 310-537-3700, Ext.