User's Manual

ST2037,47, 47B, 38P, 40T SUB. PUMPS — OPERATION AND PARTS MANUAL — REV. #3 (06/15/10) — PAGE 9
ST2037, 47, 47B, 38P, 40T SUB. PUMP — SPECIFICATIONS
1. Motor Rotation – Upon start-up, the pump " kicks " in the opposite direction of motor rotation. The correct rotation is
counterclockwise (CCW) as viewed from the impeller end of the pump.
2. Mechanical Seal Oil – Use a good grade 10 weight non-detergent hydraulic oil (i.e. Shell Turbo 32 or equivalent). Fill oil cavity
75% to 85% full (allow air space for expansion).
3. Control Box - Control box (Table 2) may be required for certain pumping applications.
snoitacificepSxoBlortnoC.2elbaT
.oNledoMepyTegatloV
ASC/LU
detsiL
lamrehT
daolrevO
noitcetorP
taolF
hctiwS
ytil
ibapaC
3BC
-elgniSzH06,CAV511
esahP
SEYSEYSEY
SNOITACIFICEPS.1ELBAT
ledoM7302-TSB7402-TS/7402-TSP8302-TST0402-TS
epyT
lagufirtneC
pmuPelbisrembuS
lagufirtneC
pmuPelbisrembuS
lagufirtneC
pmuPelbisrembuS
hsarTelbisrembuS
pmuP
rellepmI
revorebbuRelirotiN
leetS
revorebbuRelirotiN
leetS
rebbuRelirotiN
leetSrevo
rebbuRelirotiN
leetSrevo
eziSegrahcsiD&noitcuS)mm05(.ni00.2)mm05(.ni00.2)mm05(.ni00.2)mm05
(.ni00.2
yticapaCgnipmuPmumixaM
etunim/snollag37
)etunim/sretil272(
etunim/snollag78
)etunim/sretil223(
etunim/snollag06
)etunim/sretil722(
etunim/snollag97
)etunim/sretil992(
daeHxaM)sretem6.01(.tf73)sretem9.31(tf74)sretem11(tf83
4.11(.tf04
)sretem
rewoP)wk57.0(PH1)wk57.0(PH1)wk57.0(PH1)wk57.0(PH1
esahPegatloVV511Ø1V032Ø1/V511Ø1V511Ø1V021Ø1
spmAgnitratS525.21/525252
spmAgninnuR9.69.4/8.98.68.6
deriuqeRxoBlortnoC3etoNeeS3etoNeeS3etoNeeS3etoNeeS
noitcetorPdoalrevOlamrehTSEYSEYSEYSEY
noitatoR)1etoN(WCC)1etoN(WCC)1etoN(WCC)1etoN(WCC
yticapaCliOlaeSlacin
ahceM)2etoN(.cc021)2etoN(.cc021)2etoN(.cc021)2etoN(.cc331
ycneuqerFkcehC).srh003(ylhtnoM).srh003(ylhtnoM).srh003(ylhtnoM).srh003(ylhtnoM
)deepS(MPR03-/+093303-/+052303-/+004303-/+0933
htgneLelbaCrewoP).m6.7(.TF52).m2.51(.TF05).m6.7(.TF52).m6.7(.TF52
thgiewteNyrD)gk41(bl13)gk51(bl33)gk41(bl13)gk4.51(bl43