Operation and Parts Manual MODEL QP205SLT/QPT205SLT HIGH PRESSURE CENTRIFUGAL PUMP (HONDA GX240K1PMT2/GX240U1PMT2 GASOLINE ENGINE) Revision #1 (10/11/10) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
proposition 65 warning page 2 —QP205SLT/QPT205SLT CENTRIFUGAL PUMP • operation and parts manual — rev.
notes QP205SLT/QPT205SLT CENTRIFUGAL PUMP • operation and parts manual — rev.
Table of Contents QP205SLT/QPT205SLT High Pressure Centrifugal Pump Proposition 65 Warning............................................ 2 Table Of Contents..................................................... 4 Parts Ordering Procedures....................................... 5 Safety Information................................................. 6-9 Specifications/Dimensions (Pump)......................... 10 Specifications (Engine)........................................... 11 General Information...........
www.multiquip.com Parts Ordering Procedures Ordering parts has never been easier! Choose from three easy options: order via Internet (dealers only): Best deal! Effective: January 1st, 2006 If you have an MQ Account, to obtain a Username and Password, E-mail us at: parts@multiquip. com. Order parts on-line using Multiquip’s SmartEquip website! ■ View Parts Diagrams ■ Order Parts ■ Print Specification Information To obtain an MQ Account, contact your District Sales Manager for more information.
SAFETY INFORMATION FOR YOUR SAFETY AND SAFETY OF OTHERS! HAZARD SYMBOLS Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the safety messages and operating instructions could result in injury to yourself and others. Potential hazards associated with the operation of this equipment will be referenced with hazard symbols which may appear throughout this manual in conjunction with safety messages.
SAFETY INFORMATION GENERAL SAFETY DO NOT operate or service this equipment before reading the entire manual. The equipment is to be operated by trained and qualified personnel only! The equipment is for industrial use only. This equipment should not be operated by persons under 18 years of age. NEVER operate this equipment without proper protective clothing, shatterproof glasses, respiratory protection, hearing protection, steel-toed boots and other protective devices required by the job.
Safety Information ■ NEVER run engine without air cleaner. Severe engine damage may occur. ■ ALWAYS ensure pump is on level ground before use. ■ NEVER pump volatile, explosive, flammable or low flash point fluids. These fluids could ignite or explode. NEVER pump corrosive chemicals or water containing toxic substances. These fluids could create serious health and environmental hazards. Contact local authorities for assistance. ■ NEVER open the priming plug when pump is hot.
Safety Information REFUELING EMERGENCIES ■ ALWAYS know the location of the nearest fire extinguisher. ■ ALWAYS know the location of the nearest first aid kit. ■ In emergencies, always know the location of the nearest phone or keep a phone on the job site. Also know the phone numbers of the nearest ambulance , doctor and fire department . This information will be invaluable in case of emergency. MAINTENANCE SAFETY ■ NEVER lubricate components or attempt service on a running machine.
SPECIFICATIONS/DIMENSIONS (PUMP) Table 1. Specifications (Pump) Model QP205SLT/QPT205SLT Type High Pressure Centrifugal Pump Suction Size 2.00 in. (50 mm.) 1.00 in. (25 mm.) 2 ea. Discharge Size 1.50 in. (38 mm.) 1 ea. 126 gallons/minute Maximum Pumping Capacity (480 liters/minute) Max. Lift 25 ft. (7.62 m) Max. Head 312 ft. (95 m) Dimension 25.2 x 18.9 x 23.2 in. (L x W x H) (64 x 48 x 59 cm.) Dry Net Weight 99 lbs. (45 Kg.) Figure 1.
SPECIFICATIONS (ENGINE) Model Type Bore x Stroke Displacement Max Output Fuel Tank Capacity Fuel Lube Oil Capacity Speed Control Method Starting Method Dimension (L x W x H) Dry Net Weight Table 2. Specifications (Engine) HONDA GX240K1PMT2/GX240U1PMT2 Air-cooled 4 stroke, Single Cylinder, OHV, Horizontal Shaft Gasoline Engine 2.90 in. x 2.30 in. (73 mm x 58 mm) 14.81 cc 8.0 H.P./3,600 R.P.M. Approx. 1.59 U.S.
general information APPLICATION The QP205SLT/QPT205SLT centrifugal pump is a high pressure pump designed to be used for dewatering applications. The suction port on the QP205SLT/ QPT205SLT uses a 2-inch diameter opening. There are three discharge ports on the pump, 2 are 1-inch in diameter and the third is 1.5-inches in diameter. This pump can discharge water at a rate of approximately 126 gallons/ minute (gpm) or 480 liters/minute (lpm).
pump components Figure 2 shows a typical application using the QP205SLT/QPT205SLT centrifugal pump. Please note that this pump is intended for the removal of clean water. Figure 2. QP205SLT/QPT205SLT Pump Application 1. Discharge Port 1.5-Inch — Connect a flexible rubber hose to this 1.5-inch discharge port on the pump. Make sure that the hose lays flat and is not kinked. Use only recommended type discharge hose. Contact Multiquip parts department for ordering information. 6.
basic engine Figure 3. Engine Controls and Components iNITIAL SERVICING The engine (See Figure 3) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturer's engine manual for instructions and details of operation and servicing. The engine shown above is a HONDA engine, operation for other types of engines may vary somewhat. 1. Fuel Filler Cap — Remove this cap to add unleaded gasoline to the fuel tank. Make sure cap is tightened securely. DO NOT over fill.
inspection CAUTION ALWAYS wear approved eye and hearing protection before operating the pump. CAUTION 3. Insert and remove the dipstick without screwing it into the filler neck. Check the oil level shown on the dipstick. 4. If the oil level is low (See Figure 5), fill to the edge of the oil filler hole with the recommended oil type (Table 5). Maximum oil capacity is 1.16 quarts (1.1 liters). NEVER operate the pump in a confined area or enclosed area structure that does not provide ample free flow of air.
SET-UP Before Starting 1. Read safety instructions at the beginning of manual. 2. Place pump as near to water as possible, on a firm flat, level surface. 3. To prime pump, remove fill cap (See Figure 2) and fill pump casing with water. If the pump casing is not filled with water before starting, it will not begin pumping. CAUTION Pump casing must be filled with water before using pump. Otherwise, pump will not be able to begin pumping. NOTICE Suction and discharge hoses are available from Multiquip.
OPERATION CAUTION DO NOT attempt to operate the pump until the Safety, General Information and Inspection sections of this manual have been read and thoroughly understood. 3. Place the choke lever (See Figure 8) in the “CLOSED” position if starting a cold engine. This section is intended to assist the operator with the initial start-up of the pump. It is extremely important that this section be read carefully before attempting to use the pump in the field. Starting the Engine (HONDA) 1.
OPERATION 6. Grasp the starter grip (See Figure 11) and slowly pull it out. The resistance becomes the hardest at a certain position, corresponding to the compression point. Pull the starter grip briskly and smoothly for starting. CAUTION ALWAYS run engine at full speed while pumping. Stopping the Engine Normal Shutdown 1. Move the throttle lever to the IDLE position (See Figure 14) and run the engine for three minutes at low speed. Figure 11. Starter Grip 7.
maintenance (pump) Pump Vacuum Test CAUTION DO NOT attempt to start the engine unless the pump has previously been primed with water. Severe pump damage will occur if pump has not been primed. To perform the pump vacuum test do the following: 1. Remove the pump fill cap (See Figure 2), and fill the pump with water. 2. Start the engine as outlined in the initial start-up section, and wait for the pump to begin pumping. 3.
maintenance (pump) Figure 17. Pump Vacuum Tester page 20 —QP205SLT/QPT205SLT CENTRIFUGAL PUMP • operation and parts manual — rev.
maintenance (engine) Engine Maintenance Perform engine maintenance procedures as referenced by Table 6 below: Description (3) Operation Table 6.
maintenance (engine) Maintenance Perform the engine maintenance procedures as indicated below: Daily 1. Thoroughly remove dirt and oil from the engine and control area. 2. Clean or replace the air cleaner elements as necessary. 3. Check and retighten all fasteners as necessary. 4. Check the spring box and bellows for oil leaks. Repair or replace as needed. Weekly Figure 19. Oil Drain DANGER DO NOT use gasoline as a cleaning solvent, because that would create a risk of fire or explosion. 1.
preparation for long-term storage Pump Storage For storage of the pump for over 30 days, the following is required: Drain the fuel tank completely. Run the engine until the fuel in the injection system is completely consumed. Completely drain used oil from the engine crankcase and fill with fresh clean oil, then follow the procedure described in the engine manual for engine storage. Remove the drain plug from the pump and drain out any water left in the housing.
troubleshooting Symptom Troubleshooting (Pump) Possible Cause Not enough priming water in the housing? Engine speed too low? Strainer plugged? Suction hose damaged? Air leak at suction port? Pump does not take on water. Pump is located too high above water line? Solution Add water. Increase throttle. Clean strainer. Replace or repair hose, and clamps. Check that fittings are tight and properly sealed. Move pump closer to water.
troubleshooting Troubleshooting (Engine) Symptom Possible Problem Solution Spark plug bridging? Check gap, insulation or replace spark plug. Carbon deposit on spark plug? Clean or replace spark plug. Short circuit due to deficient spark plug insulation? Check spark plug insulation, replace if worn. Improper spark plug gap? Set to proper gap. Fuel reaching carburetor? Check fuel line. Water in fuel tank? Flush or replace fuel tank. Fuel filter clogged? Replace fuel filter.
troubleshooting Troubleshooting (Engine) - continued Symptom Weak in power, compression is proper and does not misfire. Weak in power, compression is proper but misfires. Engine overheats. Rotational speed fluctuates. Recoil starter malfunctions. (if applicable) Starter malfunctions. Possible Problem Air cleaner dirty? Clean or replace air cleaner. Improper level in carburetor? Check float adjustment, rebuild carburetor. Defective spark plug? Clean or replace spark plug.
notes QP205SLT/QPT205SLT CENTRIFUGAL PUMP • operation and parts manual — rev.
Explanation of Code in Remarks Column The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. NOTICE The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availability of the parts listed. SAMPLE PARTS LIST No. 1 2% 2% 3 4 paRT No. PART NAME QTY. REMARKS 12345 BOLT .....................1 .....
Suggested Spare Parts QP205SLT/QPT205SLT centrifugal pump With honda gx240k1pmt2/GX240U1PMT2 engine 1 to 3 units Qty. P/N Description 2............kit205...................KIT, PUMP, MECHANICAL SEAL, SLEEVE, O-RINGS 2............0631211100...........DRAIN CAP, FLOODING W/ O-RING 1............1878000040...........IMPELLER (QP205SLT)) 1............7207060030...........IMPELLER (QPT205SLT) 3............17210ZE2505........ELEMENT AIR CLEANER (GX240K1PMT2) 3............7210ZE2822..........
Pump Assembly 30 18 19 34 36 31 35 25 16 27 15 33 29 3 26 12 24 2 1 49 8 13 47 7 22 46 45 11 20 54 9 21 4 28 10 53 8 6 7 5 48 43 4 9 QP205SLT ONLY 44 28 58 10 6 57 5 QPT205SLT ONLY 43 44 48 40 OH V 38 41 37 39 52 42 50 32 55 51 56 23 23 14 PUMP KIT 42 42 39 39 page 30 —QP205SLT/QPT205SLT CENTRIFUGAL PUMP • operation and parts manual — rev.
Pump Assembly NO. 1 2 3 4 4 5 5 6* 7 7 8 8 9 9 10 10 11 12 * 13 14 15 16 18 19# 20 21 22* 23 24 25 25 26* 27 28* PART NO.
Pump Assembly 30 18 19 34 36 31 35 25 16 27 15 33 29 3 26 12 24 2 1 49 8 13 47 7 22 46 45 11 20 54 9 21 4 28 10 53 8 6 7 5 48 43 4 9 QP205SLT ONLY 44 28 58 10 6 57 5 QPT205SLT ONLY 43 44 48 40 OH V 38 41 37 39 52 42 50 32 55 51 56 23 23 14 PUMP KIT 42 42 39 39 page 32 —QP205SLT/QPT205SLT CENTRIFUGAL PUMP • operation and parts manual — rev.
Pump Assembly CONTINUED NO. PART NO. PART NAME QTY. REMARKS 29 0105050820 BOLT M8X20 4 30 0105050845 BOLT M8X45......................................................4................S/N 205SLT-0131 AND BELOW 30 0105050840 BOLT M8X40......................................................4................S/N 205SLT-0132 AND ABOVE 31 0451250080 LOCK WASHER M8 4 32 0105050850 BOLT M8X50 1 33$ CAP, W/ WASHER..............................................1 ...............NOT SOLD SEPARATELY 34$ CAP, W/ WASHER..
honda GX240K1PMT2/GX240U1PMT2 — air cleaner (dual) assy. page 34 —QP205SLT/QPT205SLT CENTRIFUGAL PUMP • operation and parts manual — rev.
honda GX240K1PMT2/GX240U1PMT2 — air cleaner (dual) assy. NO. 1+ 1, 2+ 2, 3+ 3, 4 6 7 8* 9* 10 13 14 15 PART NO. 16271ZE2000 16271ZE2010 17210ZE2505 17210ZE2822 17218ZE2505 17218ZE2821 17230ZE2820 17232891000 17235ZE2820 17238ZE2310 17239ZE1000 17410ZE2020 90325044000 90009ZE2003 9405006000 PART NAME QTY.
honda GX240K1PMT2/GX240U1PMT2 — camshaft assy. page 36 —QP205SLT/QPT205SLT CENTRIFUGAL PUMP • operation and parts manual — rev.
honda GX240K1PMT2/GX240U1PMT2 — camshaft assy. NO. 1+ 1+ 1, 2 3 4 5 6# 7 8 9 10 11 12 13 14 15 16, 17+ 17, PART NO. 14100ZE2W00 14100ZE2W01 14100ZE2W01 14410ZE2013 14431ZE2010 14441ZE2000 14451ZE1013 14568ZE1000 14711ZE2000 14721ZE2000 14751ZE2003 14771ZE2000 14773ZE2000 14781ZE2000 14791ZE2010 90012ZE0010 90206ZE1000 14775ZE2010 12209ZE8003 12209ZE8003 PART NAME QTY. REMARKS CAMSHAFT ASSEMBLY....................................1................INCLUDES ITEM W/# CAMSHAFT ASSEMBLY..........................
honda GX240K1PMT2/GX240U1PMT2 — carburetor assy. page 38 —QP205SLT/QPT205SLT CENTRIFUGAL PUMP • operation and parts manual — rev.
honda GX240K1PMT2/GX240U1PMT2 — carburetor assy. NO. PART NO. PART NAME QTY. REMARKS 1 16010ZE2812 CARBURETOR, GASKET SET..........................1................INCLUDES ITEM W/ + 2$%# 16011ZA0931 VALVE SET, FLOAT 1 3$%# 16013ZA0931 FLOAT SET 1 4+$ 16015ZE2005 CHAMBER SET, FLOAT.....................................1................INCLUDES ITEM 4A INCLUDES ITEM W/ > S/N BE70B A AND BELOW 4+% 16015ZE8005 CHAMBER SET, FLOAT.....................................1................
honda GX240K1PMT2/GX240U1PMT2 — carburetor assy. page 40 —QP205SLT/QPT205SLT CENTRIFUGAL PUMP • operation and parts manual — rev.
honda GX240K1PMT2/GX240U1PMT2 — carburetor assy. CONTINUED NO. PART NO. PART NAME QTY. REMARKS 15 16220ZA0702 SPACER, CARBURETOR 1 16 16221ZA0800 GASKET, CARBURETOR 1 17 16223ZA0800 GASKET, INSULATOR 1 18 16610ZE1000 LEVER, COMPLETE, CHOKE (STD) . ..............1................
honda GX240K1PMT2/GX240U1PMT2 — control assy. page 42 —QP205SLT/QPT205SLT CENTRIFUGAL PUMP • operation and parts manual — rev.
honda GX240K1PMT2/GX240U1PMT2 — control assy. NO. 2 3 4 5 6 10* 11* 12* 14* 15* 16* 19 20 21* 24* 27 PART NO. 16551ZE2000 16555ZE2000 16561ZE2000 16562ZE2000 16570ZE2W00 16571ZE2W00 16574ZE1000 16575ZE2W00 16578ZE1000 16581ZE2W00 16584883300 90013883000 90015ZE5010 90114SA0000 93500050280A 9405006000 PART NAME QTY. REMARKS ARM, GOVERNOR 1 ROD, GOVERNOR 1 SPRING, GOVERNOR 1 SPRING, THROTTLE RETURN 1 CONTROL ASSEMBLY......................................1................
honda GX240K1PMT2/GX240U1PMT2 — crankcase cover assy. page 44 —QP205SLT/QPT205SLT CENTRIFUGAL PUMP • operation and parts manual — rev.
honda GX240K1PMT2/GX240U1PMT2 — crankcase cover assy. NO. PART NO. PART NAME QTY. REMARKS + 2 11399ZE2600 COVER ASSY., CRANKCASE . .........................1 ...............INCLUDES ITEMS W/ * S/N 421135 AND BELOW + 2 11399ZE2601 COVER ASSY., CRANKCASE . .........................1 ...............INCLUDES ITEMS W/ > S/N 421136 AND ABOVE 2, 11399ZE2602 COVER ASSY., CRANKCASE . .........................1 ...............
honda GX240K1PMT2/GX240U1PMT2 — crankshaft assy. page 46 —QP205SLT/QPT205SLT CENTRIFUGAL PUMP • operation and parts manual — rev.
honda GX240K1PMT2/GX240U1PMT2 — crankshaft assy. NO. PART NO. PART NAME QTY. REMARKS + 5 13310ZE2651 CRANKSHAFT COMPLETE...............................1................INCLUDES ITEMS W/% 5, 13310ZE2651 CRANKSHAFT COMPLETE...............................1................INCLUDES ITEMS W/ % S/N 1006124 AND BELOW 5, 13310ZE2652 CRANKSHAFT, P-TYPE.....................................1................
honda GX240K1PMT2/GX240U1PMT2 — cylinder barrel assy. page 48 —QP205SLT/QPT205SLT CENTRIFUGAL PUMP • operation and parts manual — rev.
honda GX240K1PMT2/GX240U1PMT2 — cylinder barrel assy. NO. 1 2 3 4 5+ 6+ 7 8 9 10 11 12 13 14+ 14, 15# PART NO. 15510ZE2043 957010601200 9405010000 91353671004 32197ZE2003 90013883000 90446KE1000 9425110000 16541ZE2010 90013883000 34150ZH7003 90131883000 9410912000 12000ZE2815 12000ZE2406 91201890003 PART NAME QTY. REMARKS SWITCH ASSEMBLY, OIL LEVEL 1 BOLT, FLANGE 6X12 2 NUT, FLANGE 10MM 1 O-RING, 14MM (NOK) 1 SUB HARNESS..................................................1................
honda GX240K1PMT2/GX240U1PMT2 — cylinder head assy. page 50 —QP205SLT/QPT205SLT CENTRIFUGAL PUMP • operation and parts manual — rev.
honda GX240K1PMT2/GX240U1PMT2 — cylinder head assy. NO. 1+ 1, 2* 3* 4* 5 6 7 8+ 10 11 12 13 14 15+ 15, 16+ 16, 17 17, 17 17, PART NO. 12200ZH9000 12200ZH9405 12204ZE2306 12205ZE2305 12216ZE2300 12251ZE2800 12310ZE2020 12391ZE2020 14775ZE2010 90014ZE2000 90042ZE2000 92900080320E 90441ZE2010 9430112200 950051100130M 950051110030 957011008000 957251008000 9807955846 9807955855 9807956846 9807956855 PART NAME QTY. REMARKS CYLINDER HEAD...............................................1................
honda GX240K1PMT2/GX240U1PMT2 — fan cover assy. page 52 —QP205SLT/QPT205SLT CENTRIFUGAL PUMP • operation and parts manual — rev.
honda GX240K1PMT2/GX240U1PMT2 — fan cover assy. NO. 1 2 3 4 5+ 5+ 5, 7 9+ PART NO. 16731ZE2003 19610ZE2010ZC 19631ZE2D00 32197ZH8003 36100ZE1015 36100ZH7003 36100ZF6P81 90013883000 90684ZA0601 PART NAME QTY. REMARKS CLIP, TUBE 1 COVER, FAN *NH1* (BLACK) 1 SHROUD 1 SUB HARNESS..................................................1................S/N 3566259 AND BELOW SWITCH ASSY., ENGINE STOP........................1................S/N 3566259 AND BELOW SWITCH ASSY., ENGINE STOP........................1.......
honda GX240K1PMT2/GX240U1PMT2 — flywheel assy. page 54 —QP205SLT/QPT205SLT CENTRIFUGAL PUMP • operation and parts manual — rev.
honda GX240K1PMT2/GX240U1PMT2 — flywheel assy. NO. 1 2 3 4+ 4+ 4, PART NO. 31100ZE2010 19511ZE2000 28450ZE2W11 90201ZE3790 90201ZE3V00 90201ZE3V00 PART NAME QTY. REMARKS FLYWHEEL, COMPLETE 1 FAN, COOLING 1 PULLEY, STARTER (SCREEN GRID) 1 NUT, SPECIAL 16MM . ......................................1................S/N 3467138 AND BELOW NUT, SPECIAL 16MM . ......................................1................
honda GX240K1PMT2/GX240U1PMT2 — fuel tank assy. page 56 —QP205SLT/QPT205SLT CENTRIFUGAL PUMP • operation and parts manual — rev.
honda GX240K1PMT2/GX240U1PMT2 — fuel tank assy. NO. PART NO. PART NAME QTY. REMARKS 1 16854ZH8000 RUBBER, SUPPORTER 107MM 1 2 16955ZE1000 JOINT, FUEL TANK 1 + 3 17510ZE2010ZD TANK, FUEL *NH1* BLACK 1 3, 17510ZE2020ZD TANK, FUEL *NH1* BLACK................................1................S/N 1016062 AND BELOW 3, 17510ZE2800ZA TANK, FUEL *NH1* BLACK................................1................S/N 1016063 AND ABOVE + 5 17620ZH7023 CAP, FUEL FILLER.............................................1..............
honda GX240K1PMT2/GX240U1PMT2 — ignition coil assy. page 58 —QP205SLT/QPT205SLT CENTRIFUGAL PUMP • operation and parts manual — rev.
honda GX240K1PMT2/GX240U1PMT2 — ignition coil assy. NO. 1 2 3 4 5, 6 PART NO. 30500ZE2023 30700ZE1013 36101ZE1010 31512ZE2000 90684ZA0601 90015883000 PART NAME COIL ASSY., IGNITION CAP, ASSY., NOISE SUPPRESSOR WIRE, STOP SWITCH (370 MM) GROMMET, CORD CLIP, HARNESS BOLT, FLANGE (6X28) QTY. 1 1 1 1 1 2 REMARKS NOTICE + GX240K1PMT2: Model QP205SLT S/N 205SLT-0049 AND BELOW , GX240U1PMT2: Model QP205SLT S/N 205SLT-0050 AND ABOVE. QP205SLT/QPT205SLT CENTRIFUGAL PUMP • operation and parts manual — rev.
honda GX240K1PMT2/GX240U1PMT2 — muffler assy. page 60 —QP205SLT/QPT205SLT CENTRIFUGAL PUMP • operation and parts manual — rev.
honda GX240K1PMT2/GX240U1PMT2 — muffler assy. NO. 1 2 3 4 5 6 7+ 7, 8 9 10 11, PART NO. 18310ZE2822 18320ZE2P50 18325ZE2P50 18330ZE2000 18333ZE3800 18336ZE2000 18381ZE2800 18381ZE2W10 90050ZE3H00 90055ZE1000 9405008000 18355ZE2010 PART NAME QTY.
honda GX240K1PMT2/GX240U1PMT2 — piston assy. page 62 —QP205SLT/QPT205SLT CENTRIFUGAL PUMP • operation and parts manual — rev.
honda GX240K1PMT2/GX240U1PMT2 — piston assy. NO. 1+ 1+ 1, 1+ 1+ 1, 1+ 1+ 1, 1+ 1+ 1, 2 2 2 2 3 4+ 4, 4 5# 6 PART NO. 13010ZE2014 13010ZE2921 13010ZE2921 13011ZE2014 13011ZE2921 13011ZE2921 13012ZE2014 13012ZE2921 13012ZE2921 13013ZE2014 13013ZE2921 13013ZE2921 13101ZE2W00 13102ZE2W00 13103ZE2W00 13104ZE2W00 13111ZE2000 13200ZE2000 13200ZE2010 13200ZE2305 90001ZE8000 90551ZE1000 PART NAME QTY. REMARKS RING SET, PISTON (STD.).................................1................
honda GX240K1PMT2/GX240U1PMT2 — recoil starter assy. page 64 —QP205SLT/QPT205SLT CENTRIFUGAL PUMP • operation and parts manual — rev.
honda GX240K1PMT2/GX240U1PMT2 — recoil starter assy. NO. 1+ 1, 2#% 3#% 4#% 5#% 6#% 7#% 8#% 9+# 10#% 11+# 11+# 11,% 13#% 14 PART NO. 28400ZE2W01ZB 28400ZE2W01ZB 28410ZE2W01ZB 28421ZE2W01 28422ZE2W01 28441ZE2W01 28442ZE2W01 28443ZE2W01 28444ZE2W01 28469ZE2W01 28461ZE2W02 28462ZE2W01 28462ZE2W11 28462ZE2W11 90004ZE2W01 90008ZE2003 PART NAME QTY. REMARKS STARTER ASSY., RECOIL *NH1* BLACK.........1................INCLUDES ITEMS W/ # STARTER ASSY., RECOIL *NH1* BLACK.........1................
honda GX240K1PMT2/GX240U1PMT2 — gASKET KIT page 66 —QP205SLT/QPT205SLT CENTRIFUGAL PUMP • operation and parts manual — rev.
honda GX240K1PMT2/GX240U1PMT2 — gASKET KIT NO. 1+ PART NO. 061A1ZE2040 PART NAME QTY. REMARKS GASKET KIT, ENGINE.......................................1................S/N 4045100 AND ABOVE NOTICE + GX240K1PMT2: Model QP205SLT S/N 205SLT-0049 AND BELOW , GX240U1PMT2: Model QP205SLT S/N 205SLT-0050 AND ABOVE. QP205SLT/QPT205SLT CENTRIFUGAL PUMP • operation and parts manual — rev.
honda GX240K1PMT2/GX240U1PMT2 — LABELS ASSY. page 68 —QP205SLT/QPT205SLT CENTRIFUGAL PUMP • operation and parts manual — rev.
honda GX240K1PMT2/GX240U1PMT2 — LABELS ASSY. NO. 1+ 1+ 1, 2, 3+ 3, 4+ 4, 5+ PART NO. 87521ZE2W01 87521ZE2W02 87521ZE2W03 87532ZH7000 87528ZE2810 87528ZH7000 87522ZH9010 87516ZH7000 87532ZH8810 PART NAME QTY. REMARKS EMBLEM (GX240 HONDA 8.0)..........................1................S/N 4192760 AND BELOW EMBLEM (GX240 HONDA 8.0)..........................1................S/N 4192761 AND ABOVE EMBLEM (GX240 HONDA 8.0)..........................1................
Terms and Conditions of Sale — Parts PAYMENT TERMS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Multiquip reserves the right to quote and sell direct to Government agencies, and to Original Equipment Manufacturer accounts who use our products as integral parts of their own products. a. SPECIAL EXPEDITING SERVICE Terms of payment for parts are net 30 days.
notes QP205SLT/QPT205SLT CENTRIFUGAL PUMP • operation and parts manual — rev.
Operation and Parts Manual HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING UNITED STATES Multiquip Corporate Office 18910 Wilmington Ave. Carson, CA 90746 Contact: mq@multiquip.com MQ Parts Department Tel. (800) 421-1244 Fax (800) 537-3927 Mayco Parts 800-427-1244 310-537-3700 Fax: 800-672-7877 Fax: 310-637-3284 Warranty Department 800-306-2926 310-537-3700 Fax: 800-672-7877 Fax: 310-637-3284 Service Department 800-421-1244, Ext. 279 310-537-3700, Ext.