OPERATION AND PARTS MANUAL MULTIQUIP MODEL QP-303H CENTRIFUGAL PUMP (HONDA GX160 GASOLINE ENGINE) Revision #0 (01/30/06) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
PAGE 2 — QP-303H CENTRIFUGAL PUMP — PARTS MANUAL — REV.
NOTE PAGE QP-303H CENTRIFUGAL PUMP — PARTS MANUAL— REV.
QP-303H — TABLE OF CONTENTS QP-303H Gasoline Powered Centrifugal Pump Honda GX160K1TX2 Engine Air Cleaner (Dual) Assembly .............................. 32-33 Camshaft Assembly ........................................... 34-35 Carburetor Assembly ......................................... 36-37 Control Assembly ............................................... 38-39 Crankcase Cover Assembly ............................... 40-41 Crankshaft Assembly .........................................
www.multiquip.com Effective: June 1st, 2005 QP-303H — PARTS ORDERING PROCEDURES Ordering parts has never been easier! Choose from three easy options: Best Deal! Order via Internet (Dealers Only): If you have an MQ Account, to obtain a Username and Password, E-mail us at: parts@multiquip.com. Order parts on-line using Multiquip’s SmartEquip website! ■ View Parts Diagrams ■ Order Parts ■ Print Specification Information To obtain an MQ Account, contact your District Sales Manager for more information.
QP-303H — SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others. This Owner's Manual has been developed to provide NOTE complete instructions for the safe and efficient operation of the Multiquip Model QP-303H Centrifugal Pump.
QP-303H — SAFETY MESSAGE ALERT SYMBOLS CAUTION - Rotating Parts CAUTION - Equipment Damage Messages NEVER operate equipment with covers, or guards removed. Keep fingers, hands, hair and clothing away from all moving parts to prevent injury. Other important messages are provided throughout this manual to help prevent damage to your light tower, other property, or the surrounding environment.
QP-303H — RULES FOR SAFE OPERATION DANGER Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the pump: GENERAL SAFETY ■ DO NOT operate or service this equipment before reading this entire manual. ■ This equipment should not be operated by persons under 18 years of age.
QP-303H — RULES FOR SAFE OPERATION ■ NEVER run engine without air cleaner. Severe engine damage may occur. ■ ALWAYS read, understand, and follow procedures in Operator’s Manual before attempting to operate equipment. ■ ALWAYS be sure the operator is familiar with proper safety precautions and operation techniques before using pump. ■ ALWAYS store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children.
QP-303H — SPECIFICATIONS/DIMENSIONS (PUMP) Table 1. Specifications (Pump) Model QP-303H Type Trash Pump Suction & Discharge Size Pump Dimension (L x W x H) Dry Net Weight 3.00 in. (76 mm.) Maximum Pumping Capacity 267 gallons/minute (1,011 liters/minute) Max. Lift 25 ft. (7.62 meters) Max. Head 105 ft. (32.0 meters) 21.25 x 14.25 X 18.0 in. (54 X 36 X 45 cm.) 77 lbs. (35 Kg.) Figure 1. QP-303H Dimensions PAGE 10 — QP-303H CENTRIFUGAL PUMP — PARTS MANUAL — REV.
QP-303H — SPECIFICATIONS/DIMENSIONS (ENGINE) Table 2. Specifications (Engine) Model HONDA GX160K1TX2 Type Air-cooled 4 stroke, Single Cylinder, OHV, Horizontal Shaft Gasoline Engine Bore X Stroke 2.7 in. x 1.8 in. (68 mm x 45 mm) Displacement 163 cc (9.9 cu-in) Max Output 5.5 H.P./3600 R.P.M. Engine Fuel Tank Capacity Fu e l Lube Oil Capacity Approx. 0.95 U.S. gallons (3.6 liters) Unleaded Automobile Gasoline .60 liters (0.
QP-303H — GENERAL INFORMATION APPLICATION The QP303H Centrifugal Trash Pump is designed to be used for de-watering applications. Both the suction and discharge ports on the QP-303H pump use a 3-inch diameter opening, which allows the pump to pump at a rate of approximately 200 gallons/minute (gpm) or 757 liters/minute (lpm). Centrifugal or self priming pumps are designed to purge air from the suction line and create a partial vacuum in the pump body.
QP-303H — PUMP COMPONENTS Figure 2 shows a typical application using the QP-303H centrifugal pump. Please note that this pump is intended for the removal of clean water and water containing some debris and solids. Maximum size of solids should not exceed 1 inch (25 mm) in diameter. DO NOT set strainer on bottom of water bed. Placing the strainer above the water bed will prevent the pump from drawing in excessive amounts of sand and foreign debris. Figure 2. QP-303H Pump Application 1. 2.
QP-303H — BASIC ENGINE Figure 3. Engine Controls and Components INITIAL SERVICING 6. The engine (Figure 3) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers engine manual for instructions & details of operation and servicing. The engine shown above is a HONDA engine, operation for other types of engines may vary somewhat. Choke Lever – Used in the starting of a cold engine, or in cold weather conditions. The choke enriches the fuel mixture. 7.
QP-303H — PRE-INSPECTION (ENGINE) Before Starting 1. Read safety instructions at the beginning of manual. 2. Clean the pump, removing dirt and dust, particularly the engine cooling air inlet, carburetor and air cleaner. 3. Check the air filter for dirt and dust. If air filter is dirty, replace air filter with a new one as required. Figure 5. Engine Oil Dipstick (Oil Level) 4. Check carburetor for external dirt and dust. Clean with dry compressed air. Table 5. Oil Type 5.
QP-303H — PRE-SETUP (PUMP) Before Starting 1. Read safety instructions at the beginning of manual. 2. Place pump as near to water as possible, on a firm flat, level surface. 3. To prime pump, remove fill cap (Figure 2) and fill pump casing with water. If the pump casing is not filled with water before starting, it will not begin pumping. CAUTION - Pump Casing Pump casing must be filled with water before using pump. Otherwise pump will not be able to begin pumping.
QP-303H — INITIAL START-UP (ENGINE) CAUTION - Read Manual DO NOT attempt to operate the pump until the Safety, General Information and Inspection sections of this manual have been read and thoroughly understood. 3. Place the choke lever (Figure 8) in the "OPEN " position if starting a cold engine. This section is intended to assist the operator with the initial start-up of the trash pump. It is extremely important that this section be read carefully before attempting to use the pump in the field.
QP-303H — INITIAL START-UP (ENGINE) 6. Grasp the starter grip (Figure 11) and slowly pull it out. The resistance becomes the hardest at a certain position, corresponding to the compression point. Pull the starter grip briskly and smoothly for starting. CAUTION - Maximum Engine Speed ALWAYS run engine at full speed while pumping. Stopping The Engine Normal Shutdown 1. Move the throttle lever to the IDLE position (Figure 14) and run the engine for three minutes at low speed. Figure 11. Starter Grip 7.
QP-303H — NOTE PAGE QP-303H CENTRIFUGAL PUMP — PARTS MANUAL— REV.
QP-303H — MAINTENANCE (PUMP) Pump Vacuum Test Adjusting Impeller Clearance CAUTION - Pump Priming DO NOT attempt to start the engine unless the pump has previously been primed with water. Severe pump damage will occur if pump has not been primed. To perform the pump vacuum test do the following: 1. Remove the pump fill cap (Figure 2), and fill the pump with water. 2. Start the engine as outlined in the initial start-up section, and wait for the pump to begin pumping. 3.
QP-303H — MAINTENANCE (PUMP) NOTE Pressure reading may vary depending on altitude. See Tables 3 and 4 on page 12. Figure 17. Pump Vacuum Tester QP-303H CENTRIFUGAL PUMP — PARTS MANUAL— REV.
QP-303H — MAINTENANCE (ENGINE) Engine Maintenance Perform engine maintenance procedures as referenced by Table 6 below: Table 6. Engine Maintenance Schedule DESCRIPTION (3) OPERATION BEFORE CHECK X FIRST EVERY MONTH 3 MONTHS OR OR 10 HRS. 25 HRS. EVERY 6 MONTHS OR 50 HRS. EVERY YEAR OR 100 HRS. EVERY 2 YEARS OR 200 HRS.
QP-303H — MAINTENANCE (ENGINE) MAINTENANCE Perform the engine maintenance procedures as indicated below: DAILY ■ Thoroughly remove dirt and oil from the engine and control area. Clean or replace the air cleaner elements as necessary. Check and retighten all fasteners as necessary. Check the spring box and bellows for oil leaks. Repair or replace as needed. WEEKLY ■ Remove the fuel filter cap and clean the inside of the fuel tank.
QP-303H — PREPARATION FOR LONG -TERM STORAGE Pump Storage For storage of the pump for over 30 days, the following is required: z Drain the fuel tank completely. z Run the engine until the fuel in the injection system is completely consumed. z Completely drain used oil from the engine crankcase and fill with fresh clean oil, then follow the procedures described in the engine manual for engine storage. z Remove the drain plug from the pump and drain out any water from left in the housing.
NOTE PAGE QP-303H CENTRIFUGAL PUMP — PARTS MANUAL— REV.
QP-303H — TROUBLESHOOTING (ENGINE) TABLE 7. ENGINE TROUBLESHOOTING SYMPTOM POSSIBLE PROBLEM SOLUTION Difficult to start Fuel is available but spark plug will not ignite. (Power available at high tension cable). Fuel is available but spark plug will not ignite. (Power NOT available at high tension cable). Fuel is available and spark plug ignites (compression normal). Fuel is available and spark plug ignites (compression low ). Ignition plug being bridge? Check ignition system.
QP-303H — TROUBLESHOOTING (ENGINE/PUMP) TABLE 7. ENGINE TROUBLESHOOTING (Continued) SYMPTOM POSSIBLE PROBLEM SOLUTION Operation not satisfactory Rotational speed fluctuates. Recoil star ter not working properly. Governor adjustment improper? Adjust governor to correct lever. Governor spring defective? Clean or replace ignition. Fuel flow erratic? Check fuel line. Air taken in through suction line? Check suction line. Dust in rotating par t? Clean recoil star ter assembly.
QP-303H — EXPLANATION OF CODE IN REMARKS COLUMN The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availibility of the parts listed. PART NO. PART NAME QTY. 12345 BOLT ....................... 1.... WASHER, 1/4 IN. ...........
QP-303H — SUGGESTED SPARE PARTS QP-303H CENTRIFUGAL PUMP 1 TO 3 UNITS WITH HONDA GX160K1TX2 ENGINE Qty. 2 2 2 1 1 1 1 3 3 1 1 P/N Description KIT303 ............................... KIT, PUMP, MECHANICAL SEAL, O-RINGS 0631211100ASSY .............. DRAIN CAP, FLOODING 0480350300 ....................... O-RING FLOODING DRAIN CAP 0808112320 ....................... MECHANICAL SEAL 0482200750 ....................... O-RING, VOLUTE CASING 0489312550 ....................... O-RING, CASING 1391000030 ..............
QP-303H — PUMP ASSY. PUMP ASSY. PAGE 30 — QP-303H CENTRIFUGAL PUMP — PARTS MANUAL — REV.
QP-303H — PUMP ASSY. PUMP ASSY. NO. PART NO.
HONDA GX160K1TX2 ENGINE — AIR CLEANER (DUAL) ASSY. AIR CLEANER (DUAL) ASSY. PAGE 32 — QP-303H CENTRIFUGAL PUMP — PARTS MANUAL — REV.
HONDA GX160K1TX2 ENGINE — AIR CLEANER (DUAL) ASSY. AIR CLEANER (DUAL) ASSY. NO. PART NO. 1 16271ZE1000 2 17210ZE1505 3 * 17218ZE1505 4 17230ZE1820 5 * 17232891000 6# 17238ZE7010 17239ZE1000 7# 8 17410ZE1020 9 90201415000 11 90325044000 12 90325044000 13 957010602000 PART NAME QTY. REMARKS GASKET, ELBOW 1 ELEMENT, AIR CLEANER (DUAL) ............... 1 ......
HONDA GX160K1TX2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. PAGE 34 — QP-303H CENTRIFUGAL PUMP — PARTS MANUAL — REV.
HONDA GX160K1TX2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. NO. PART NO. 1 14100ZE1812 2 14410ZE1010 3 14431ZE1000 4 14441ZE1010 5 14451ZE1013 6 * 14568ZE1000 7 14711ZF1000 8 14721ZH8810 9 14751ZF1000 10 14771ZE1000 11 14773ZE1000 12 14781ZE1000 13 14791ZE1010 14 90012ZE0010 15 90206ZE1000 PART NAME QTY. REMARKS CAMSHAFT ASSY. ...................................... 1 ...... INCLUDES ITEMS W/ * ROD, PUSH 2 ARM, VLAVE ROCKER 2 LIFTER, VALVE 2 PIVOT, ROCKER ARM 2 SPRING, WEIGHT RETURN 1 VALVE, IN. 1 VALVE, EX.
HONDA GX160K1TX2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. PAGE 36 — QP-303H CENTRIFUGAL PUMP — PARTS MANUAL — REV.
HONDA GX160K1TX2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. NO. PART NO.
HONDA GX160K1TX2 ENGINE — CONTROL ASSY. CONTROL ASSY. PAGE 38 — QP-303H CENTRIFUGAL PUMP — PARTS MANUAL — REV.
HONDA GX160K1TX2 ENGINE — CONTROL ASSY. CONTROL ASSY. NO. PART NO. 1 16500ZH8030 4 16551ZE0010 5 16555ZE1000 6 16561ZE1020 7 16562ZE1020 8 16571ZH8020 * 9 * 16574ZE1000 16575ZH8000 10 * 12 * 16578ZE1000 13 * 16580ZH8030 14 16584883300 * 17 90013883000 18 90015ZE5010 19 90114SA0000 * 93500050250A 22 * 9405006000 24 PART NAME QTY. REMARKS CONTROL ASSY. ......................................... 1 ......
HONDA GX160K1TX2 ENGINE — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. PAGE 40 — QP-303H CENTRIFUGAL PUMP — PARTS MANUAL — REV.
HONDA GX160K1TX2 ENGINE — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. NO. PART NO. 1 11300ZE1641 3 11381ZH8801 4 15600ZE1003 5 15600ZG4003 6# 15620ZE1003 15625ZE1003 9# 10+ 15625ZE1003 91202883005 11 * 12 9430108140 13 957010803200 14 961006205000 * PART NAME QTY. REMARKS COVER ASSY., CRANKCASE (U-TYPE) ..... 1 ...... INCLUDES ITEMS W/ * GASKET, CASE COVER 1 CAP ASSY., OIL FILLER ............................. 1 ...... INCLUDES ITEMS W/# CAP ASSY., OIL FILLER ............................. 1 ......
HONDA GX160K1TX2 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PAGE 42 — QP-303H CENTRIFUGAL PUMP — PARTS MANUAL — REV.
HONDA GX160K1TX2 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. NO. PART NO. 1 13310ZE1660 PART NAME CRANKSHAFT (T-TYPE) QTY. 1 REMARKS QP-303H CENTRIFUGAL PUMP — PARTS MANUAL— REV.
HONDA GX160K1TX2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. PAGE 44 — QP-303H CENTRIFUGAL PUMP — PARTS MANUAL — REV.
HONDA GX160K1TX2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. NO. PART NO. PART NAME QTY. REMARKS 2 12000ZH8811 CYLINDER ASSY. (OIL ALERT) ................ 1....... INCLUDES ITEMS W/ * 3 15510ZE1033 SWITCH ASSY., OIL LEVEL 1 4 16510ZE1000 GOVERNOR ASSY. ................................... 1.......
HONDA GX160K1TX2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 46 — QP-303H CENTRIFUGAL PUMP — PARTS MANUAL — REV.
HONDA GX160K1TX2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. NO. PART NO. 1 12210ZH8000 2 * 12204ZE1306 12205ZE1315 3 * 4 * 12216ZE5300 5 12251ZF1800 6 12310ZE1010 7 12391ZE1000 8 15721ZH8000 9 90016ZE1000 10 90043ZE1020 11 90047ZE1000 12 9430110160 14 957230806000 15 9807955846 15 9807956846 PART NAME QTY. REMARKS CYLINDER HEAD......................................... 1 ...... INCLUDES ITEMS W/ * GUIDE, VALVE (OS) (OPTIONAL) 1 GUIDE, EX.
HONDA GX160K1TX2 ENGINE — FAN COVER ASSY. FAN COVER ASSY. PAGE 48 — QP-303H CENTRIFUGAL PUMP — PARTS MANUAL — REV.
HONDA GX160K1TX2 ENGINE — FAN COVER ASSY. FAN COVER ASSY. NO. PART NO. 2 19610ZE1000ZC 4 19612ZH8810 4 19612ZH8811 7 8 10 11 13 14 17 19 90601ZH7013 19630ZH8000 32197ZH8003 36100ZE1015 90013883000 90022888010 34150ZH7003 957010600800 PART NAME QTY. REMARKS COVER, FAN *NH1* (BLACK) 1 PLATE, SIDE (OIL ALERT) .................... 1 .......... USE FROM ENGINE S/N 5372719 PLATE, SIDE (OIL ALERT) .................... 1 .......... USE FROM ENGINE ..................................................................
HONDA GX160K1TX2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. PAGE 50 — QP-303H CENTRIFUGAL PUMP — PARTS MANUAL — REV.
HONDA GX160K1TX2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. NO. 1 2 4 5 5 8 PART NO. 13331357000 19511ZE1000 28451ZH8003 31100ZE1010 31100ZE1810 90201878003 PART NAME KEY, SPECIAL WOODRUFF (25 X 18) FAN, COOLING PULLEY, STARTER FLYWHEEL FLYWHEEL (LAMP) NUT, SPECIAL (14 mm) QTY. 1 1 1 1 1 1 REMARKS QP-303H CENTRIFUGAL PUMP — PARTS MANUAL— REV.
HONDA GX160K1TX2 ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 52 — QP-303H CENTRIFUGAL PUMP — PARTS MANUAL — REV.
HONDA GX160K1TX2 ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. NO. 1 2 3 5 6 * 11 12 13 PART NO. 16854ZH8000 16955ZE1000 17510ZE1020ZF 17620ZH7023 17631ZH7003 91353671003 9405006000 950014500360M 14 15 9500202080 957010602500 PART NAME QTY. REMARKS RUBBER, SUPPORTER (107 mm) 1 JOINT, FUEL TANK 1 TANK, FUEL *NH1* (BLACK) 1 CAP, FUEL FILLER ...................................... 1 ...... INCLUDES ITEMS W/ * GASKET, FUEL FILLER CAP 1 O-RING (13.5 X 1.5) (ARAI) 1 NUT, FLANGE (6 mm) 2 BULK HOSE, FUEL (4.
HONDA GX160K1TX2 ENGINE — IGNITION COIL ASSY. IGNITION COIL ASSY. PAGE 54 — QP-303H CENTRIFUGAL PUMP — PARTS MANUAL — REV.
HONDA GX160K1TX2 ENGINE — IGNITION COIL ASSY. IGNITION COIL ASSY. NO. PART NO. 1 30500ZE1033 2 30700ZE1013 7 36101ZE1010 11 90121952000 PART NAME COIL ASSY., IGNITION CAP ASSY., NOISE SUPPRESSOR WIRE, STOP SWITCH (370 mm) BOLT, FLANGE (6 X 25) QTY. 1 1 1 2 REMARKS QP-303H CENTRIFUGAL PUMP — PARTS MANUAL— REV.
HONDA GX160K1TX2 ENGINE — MUFFLER ASSY. MUFFLER ASSY. PAGE 56 — QP-303H CENTRIFUGAL PUMP — PARTS MANUAL — REV.
HONDA GX160K1TX2 ENGINE — MUFFLER ASSY. MUFFLER ASSY. NO. PART NO. 1 18310ZF1000 1 18310ZH8810 3 18320ZF1H01 7 18355ZE1000 8 18381ZH8800 11 90050ZE1000 12 90055ZE1000 15 94001080000S PART NAME MUFFLER MUFFLER (OPTIONAL) PROTECTOR, MUFFLER ARRESTER, SPARK (OPTIONAL) GASKET, MUFFLER SCREW, TAPPING (5 X 8) SCREW, TAPPING (4 X 6) (OPTIONAL) NUT, HEX (8 mm) QTY. 1 1 1 1 1 4 1 2 REMARKS QP-303H CENTRIFUGAL PUMP — PARTS MANUAL— REV.
HONDA GX160K1TX2 ENGINE — PISTON ASSY. PISTON ASSY. PAGE 58 — QP-303H CENTRIFUGAL PUMP — PARTS MANUAL — REV.
HONDA GX160K1TX2 ENGINE — PISTON ASSY. PISTON + RINGS ASSY. NO. PART NO. 1 13010ZF1023 1 13010ZH8941 1 13011ZF1023 1 13011ZH8941 1 13012ZF1023 1 13012ZH8941 1 13013ZF1023 1 13013ZH8941 2 13101ZH8000 2 13102ZH8000 2 13103ZH8000 2 13104ZH8000 3 13111ZE1000 4 132A0ZE1000 4 13200ZE1000 4 13200ZE1010 5 90001ZE1000 * 90551ZE1000 6 PART NAME QTY. REMARKS RING SET, PISTON (STD) ................... 1 ......... USE UP TO ENGINE S/N 4733210 RING SET, PISTON (STD) ................... 1 .........
HONDA GX160K1TX2 ENGINE — RECOIL STARTER ASSY. RECOIL STARTER ASSY. PAGE 60 — QP-303H CENTRIFUGAL PUMP — PARTS MANUAL — REV.
HONDA GX160K1TX2 ENGINE — RECOIL STARTER ASSY. RECOIL STARTER ASSY. NO. PART NO. 1 28400ZH8013ZB 2 * 28410ZH8003ZB 28420ZH8013 3 * 4 * 28422ZH8013 28433ZH8003 5 * 6 * 28441ZH8003 7 * 28442ZH8003 8 28443ZH8003 * 9 * 28461ZH8003 10 * 28462ZH8003 90003ZH8003 11 * 12 90008ZE2003 PART NAME QTY. REMARKS STARTER ASSY., RECOIL “NH1”(BLACK) ............ 1 .....
HONDA GX160K1TX2 ENGINE — GASKET KIT ASSY. GASKET KIT ASSY. NO ARTWORK AVALIBLE PAGE 62 — QP-303H CENTRIFUGAL PUMP — PARTS MANUAL — REV.
HONDA GX160K1TX2 ENGINE — GASKET KIT ASSY. GASKET KIT ASSY. NO. PART NO. 1 11381ZH8800 2 * 11381zh8801 12251ZF1800 3 * 4 * 12391ZE1000 5 * 16212ZH8800 6 16221ZH8801 * 18381ZH8800 7 * PART NAME QTY. REMARKS GASKET KIT ............................................. 1 ...... INCLUDES ITEMS W/ * GASKET, CASE COVER 1 GASKET, CYLINDER HEAD 1 GASKET, CYLINDER HEAD COVER 1 GASKET, INSULATOR 1 GASKET, CARBURETOR 1 GASKET, MUFFLER 1 QP-303H CENTRIFUGAL PUMP — PARTS MANUAL— REV.
HONDA GX160K1TX2 ENGINE — LABELS ASSY. LABELS ASSY. PAGE 64 — QP-303H CENTRIFUGAL PUMP — PARTS MANUAL — REV.
HONDA GX160K1TX2 ENGINE — LABELS ASSY. LABELS ASSY. NO. PART NO. 1 87521ZH8010 1 87521ZH8020 2 87522ZE1810 3 87522ZH9000 6 87528ZE1810 7 87530ZH8810 8 87532ZH8810 15 87586ZH7W00 PART NAME QTY. REMARKS EMBLEM (INTERNAL) ............................. 1 ...... USE UP TO ENGINE S/N 7438467 EMBLEM (5.5) .......................................... 1 ...... USE FROM ENGINE S/N 7438468 MARK, CAUTION (EXTERNAL) ............... 1 ......
TERMS AND CONDITIONS OF SALE — PARTS Effective: October 1, 2002 PAYMENT TERMS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Terms of payment for parts are net 10 days. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments are F.O.B. point of origin.
NOTE PAGE QP-303H CENTRIFUGAL PUMP — PARTS MANUAL— REV.
OPERATION AND PARTS MANUAL HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING UNITED STATES Multiquip Corporate Office 18910 Wilmington Ave. Tel. (800) 421-1244 Carson, CA 90746 Fax (800) 537-3927 Contact: mq@multiquip.com Mayco Parts 800-306-2926 Fax: 800-672-7877 310-537-3700 Fax: 310-637-3284 Service Department 800-421-1244 Fax: 310-537-4259 310-537-3700 MQ Parts Department 800-427-1244 310-537-3700 MEXICO UNITED KINGDOM MQ Cipsa Carr. Fed. Mexico-Puebla KM 126.
