Operation and Parts Manual MODELS QP4TZT10P QP4TZTMP16F QP4TZTMPXF trash pump (Hatz 1B40U-2203A Diesel Engine) Revision #1 (08/29/11) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
proposition 65 warning Diesel engine exhaust and some of page 2 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
Reporting Safety Defects If you believe that your vehicle has a defect that could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Multiquip at 1-800-421-1244. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
Table of Contents QP4TZT10P/TMP16F/TMPXF Trash Pump Proposition 65 Warning............................................ 2 Reporting Safety Defects.......................................... 3 Table Of Contents..................................................... 4 Parts Ordering Procedures....................................... 5 Safety Information............................................... 6-10 Specifications......................................................... 12 Dimensions........................
www.multiquip.com Parts Ordering Procedures Ordering parts has never been easier! choose from three easy options: order via internet (Dealers only): Best Deal! Effective: January 1st, 2006 If you have an MQ Account, to obtain a Username and Password, E-mail us at: parts@multiquip. com. Order parts on-line using Multiquip’s SmartEquip website! ■ View Parts Diagrams ■ Order Parts ■ Print Specification Information To obtain an MQ Account, contact your District Sales Manager for more information.
Safety Information Do not operate or service the equipment before reading the entire manual. Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the safety messages and operating instructions could result in injury to yourself and others. Potential hazards associated with the operation of this equipment will be referenced with hazard symbols which may appear throughout this manual in conjunction with safety messages.
Safety Information general saFeTY CauTion never operate this equipment without proper protective clothing, shatterproof glasses, respiratory protection, hearing protection, steel-toed boots and other protective devices required by the job or city and state regulations. never operate this equipment when not feeling well due to fatigue, illness or when under medication. never operate this equipment under the influence of drugs or alcohol.
Safety Information CauTion never lubricate components or attempt service on a running machine. never block or restrict flow from discharge hose. Remove kinks from discharge line before starting pump. Operation with a blocked discharge line can cause water inside pump to overheat. NOTICE alWaYs fill the pump casing with water before starting the engine. Failure to maintain water inside the pump housing will cause severe damage to the pump and mechanical seal.
Safety Information BaTTerY saFeTY (eleCTriC sTarT onlY) Danger Do noT drop the battery. There is a possibility that the battery will explode. Do noT expose the battery to open flames, sparks, cigarettes, etc. The battery contains combustible gases and liquids. If these gases and liquids come into contact with a flame or spark, an explosion could occur. Warning alWaYs wear safety glasses when handling the battery to avoid eye irritation.
Safety Information ToWing saFeTY CauTion Check with your local county or state safety towing regulations, in addition to meeting Department of Transportation (DOT) Safety Towing Regulations, before towing your generator. Refer to MQ Power trailer manual for additional safety information.
notes qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
specifications Model Type Suction x Discharge Size Maximum Pumping Capacity Maximum Solids Diameter Maximum Lift Maximum Head Dry Net Weight (Pump) Dry Net Weight (Pump and Trailer) Fuel Tank Capacity Engine Make Engine Type Cylinder Bore x Stroke Displacement Maximum Output Fuel Tank Capacity Oil Capacity Starting Method Dry Net Weight Table 1. Pump Specifications QP4TZT10P QP4TZTMP16F QP4TZTMPXF Trash Pump 4 x 4 in. (100 x 100 mm) 526 gal/minute (2000 liters/minute) 1.50 in. (38 mm) 25 ft. (7.
DIMENSIONS A Reference Letter B A B C D E F G H J K L C Table 3. Dimensions QP4TZTMP16F/ QP4TZT10P QP4TZTMPXF in. (mm) in. (mm) 19 (485) 24.2 (615) 13.5 (343) 49 (1,245) 56.5 (1,435) 52.4 (1,331) 44.5 (1,130) 23.5 (597) 102 (2,591) 91.6 (2,327) 25 (635) 67 (1,702) 28.4 (721) K D F J L E G H Figure 2. Dimensions qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
general information APPLICATION Elevation The QP4TZ Trash Pump is designed to be used for dewatering applications. Both the suction and discharge ports on the trash pump use a 4-inch diameter opening, which allows it to pump at a rate of approximately 526 gallons/minute (gpm) or 2,000 liters/minute (lpm). Higher elevations will effect the performance of the pump. Due to less atmospheric pressure at higher altitudes, pumps DO NOT have the priming ability that they have at sea level.
components (pump) Figure 3 shows a typical application using the QP4TZ trash pump. Please note that this pump is intended for the removal of clean water and water containing some debris and solids. Maximum size of solids should not exceed 1.5 inch (30 mm) in diameter. DO NOT set strainer on bottom of water bed. Placing the strainer above the water bed will prevent the pump from drawing in excessive amounts of sand and foreign debris. 2 1 5 4 3 6 11 7 5 9 10 8 12 Figure 3.
basic engine 1 2 3 11 HATZ DIESEL 10 4 scs HATZ DIESEL 8 9 FRONT VIEW 7 6 5 REAR VIEW Figure 4. Engine Controls and Components INITIAL SERVICING The engine (Figure 4) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturer’s engine manual for instructions and details of operation and servicing. 1. Fuel Filler Cap/Fuel Tank — Pull this latch to add diesel fuel to the tank. After refueling, always make sure the fuel cap is latched properly.
inspection (engine) DANGER NEVER operate the pump in a confined area or enclosed area structure that does not provide ample free flow of air. 3. Insert and remove the dipstick without screwing it into the filler neck. Check the oil level shown on the dipstick. 4. If the oil level is low (Figure 6), fill to the edge of the oil filler hole with the recommended oil type (Table 6). Maximum oil capacity is 1.6 quarts (1.5 liters).
setup Before Starting 1. Read safety instructions at the beginning of manual. 2. Move the trailer as near to the water as possible. 3. To prime pump, remove fill cap (Figure 3) and fill pump casing with water. If the pump casing is not filled with water before starting, it will not begin pumping. NOTICE Pump casing must be filled with water before using pump. Otherwise pump will not be able to begin pumping. WARNING DO NOT open fill cap if pump is hot! Water inside may be under pressure. 4.
operation CAUTION DO NOT attempt to operate the pump until the Safety, General Information and Inspection sections of this manual have been read and thoroughly understood. Starting the Engine - Recoil Start 1. Move the speed lever control to the START position (Figure 7). Engine Indicators Engine Running (Happy Face) — indicates that the engine and associated components are functioning correctly. Battery Charge — indicates that the battery charging system is not working correctly.
operation Stopping The Engine Normal Shutdown 1. Move the engine speed lever to the low speed and run the engine for about three minutes with no load. 2. After the engine cools, move the engine speed lever to the STOP position (Figure 10). Figure 10. Engine Speed Lever Control (STOP) 3. Slowly pull the starter grip (Figure 8) until strong resistance is felt and leave it in this position. This prevents rust from forming while the engine is not in use.
maintenance PUMP VACUUM TEST ADJUSTING IMPELLER CLEARANCE To perform the pump vacuum test do the following: 1. If it is necessary to replace impeller or volute, be sure clearance between impeller and volute is adjusted correctly. NOTICE DO NOT attempt to start the engine unless the pump has previously been primed with water. Severe pump damage will occur if pump has not been primed. 1. Remove the pump fill cap (Figure 3), and fill the pump with water. 2.
maintenance Figure 11. Pump Vacuum Tester page 22 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
maintenance ENGINE MAINTENANCE Perform engine maintenance procedures as referenced by Table 7 below: Table 7. Engine Maintenance Schedule EVERY EVERY EVERY EVERY FIRST 2 YEARS YEAR BEFORE MONTH 3 MONTHS 6 MONTHS DESCRIPTION (3) OPERATION OR OR OR OR OR USE 100 HRS 200 HRS 50 HRS. 25 HRS. 1O HRS.
maintenance Perform the engine maintenance procedures as indicated below: DAILY ENGINE AIR CLEANER 1. Loosen the wing nut and detach the cover of the air cleaner shown in Figure 13. 1. Thoroughly remove dirt and oil from the engine and control area. 2. Clean or replace the air cleaner elements as necessary. Check and retighten all fasteners as necessary. 3. Check the spring box and bellows for oil leaks. Repair or replace as needed. WEEKLY 1.
maintenance Trailer MainTenanCe The following trailer maintenance guidelines are intended to assist the operator in preventive maintenance. adjustable Channel Your trailer may be equipped with an adjustable channel (Figure I) that allows the coupler to be raised or lowered to a desired height. Periodically check the channel bolts for damage or loosening.
maintenance Danger never crawl under the trailer unless it is on firm and level ground and resting on properly placed and secured jackstands. The possibility exists of the trailer falling thus causing equipment damage and severe bodily harm even death! leaf suspension The leaf suspension springs and associated components (Figure III) should be visually inspected every 6,000 miles for signs of excessive wear, elongation of bolt holes, and loosening of fasteners.
trailer safety guidelines The following guidelines are intended to assist the operator in the operation and handling of a trailer. Shift your automatic transmission into a lower gear for city driving. Safety precautions should be followed at all times when operating a trailer. Failure to read, understand and follow the safety guidelines could result in injury to yourself and others. Loss of control of the trailer or tow vehicle can result in death or serious injury.
trailer safety guidelines Driving ConDiTions When towing a trailer, you will have decreased acceleration, increased stopping distance, and increased turning radius (which means you must make wider turns to keep from hitting curbs, vehicles, and anything else that is on the inside corner). In addition, you will need a longer distance to pass, due to slower acceleration and increased length. Be alert for slippery conditions.
trailer safety guidelines inoperaBle BraKes, lighTs or Mirrors Be sure that the brakes and all of the lights on your trailer are functioning properly before towing your trailer. Check the trailer taillights by turning on your tow vehicle headlights. Check the trailer brake lights by having someone step on the tow vehicle brake pedal while you look at trailer lights. Do the same thing to check the turn signal lights. See Trailer Wiring Diagram section in this manual.
trailer safety guidelines To determine the “empty” or “net” weight of your trailer, weigh it on an axle scale. To find the weight of the trailer using an axle scale, you must know the axle weights of your tow vehicle without the trailer coupled. Some of the trailer weight will be transferred from the trailer to the tow vehicle axles, and an axle scale weighs all axles, including the tow vehicle axles. G VIN TA VIN TAG Figure B.
trailer safety guidelines saFeTY Chains If the coupler connection comes loose, the safety chains can keep the trailer attached to the tow vehicle. With properly rigged safety chains, it is possible to keep the tongue of the trailer from digging into the road pavement, even if the coupler-to-hitch connection comes apart. JaCKsTanD A device on the trailer that is used to raise and lower the coupler. The jack is sometimes called the “landing gear” or the “tongue jack”.
trailer safety guidelines Warning Lower the trailer (Figure D) until the coupler fully engages the hitch ball. A worn, cracked or corroded hitch ball can fail while towing and may result in death or serious injury. 2-INCH TRAILER COUPLER Before coupling trailer, inspect the hitch ball for wear, corrosion and cracks. TOW VEHICLE Replace worn or damaged hitch ball. 2-INCH BALL Warning A loose hitchball nut can result in uncoupling, leading to death or serious injury.
trailer safety guidelines attaching safety Chain Backup Lights (place tow vehicle gear shift in reverse). Visually inspect the safety chains and hooks for wear or damage. Replace worn or damaged safety chains and hooks before towing. Turn Signals (activate tow vehicle directional signal lever). Attach the safety chains so that they: • Cross underneath the coupler. See Figure E.
trailer safety guidelines pinTle hiTCh Coupler A pintle eye coupler (Figure F) connects to a pintle-hook hitch that is located on or under the rear bumper of the tow vehicle. This system of coupling a trailer to a tow vehicle is sometimes referred to as a “lunette eye, tow ring or G.I. hitch.
trailer safety guidelines Raise the bottom surface of the coupler to be above the top of the pintle hitch hook. Use the tongue jackstand to support the trailer tongue. Wood or concrete blocks may also be used. Warning Lower the trailer so that its entire tongue weight is held by the hitch. Raise the jackstand to a height where it will not interfere with the road. Tire saFeTY A defective pintle hitch not properly fastened can result in uncoupling, leading to death or serious injury.
trailer safety guidelines wrench, use a lug wrench (from your tow vehicle) and tighten the nuts as much as you can. Then have a service garage or trailer dealer tighten the lug nuts to the proper torque. Warning Metal creep between the wheel rim and lug nuts will cause rim to loosen and could result in a wheel coming off, leading to death or serious injury. Tighten lug nuts before each tow. Lug nuts are also prone to loosen after first being assembled.
trailer safety guidelines step 2. Determine the weight of the equipment being loaded on the tow vehicle. That weight may not safely exceed the available equipment load capacity. The trailer’s Tire Information Placard is attached adjacent to or near the trailer’s VIN (Certification) label at the left front of the trailer (See Figure I). along with other care and maintenance activities, can also: Locate the statement, “The combined weight of occupants and cargo should never exceed XXX lbs.
trailer safety guidelines next number: This two-digit number is the wheel or rim diameter in inches. If you change your wheel size, you will have to purchase new tires to match the new wheel diameter. in the tire. In general, the greater the number of plies, the more weight a tire can support. Tire manufacturers also must indicate the materials in the tire, which include steel, nylon, polyester, and others. next number: This two- or three-digit number is the tire’s load index.
trailer safety guidelines Tires for light trucks have other markings besides those found on the sidewalls of passenger tires. lT: The “LT” indicates the tire is for light trucks or trailers. sT: An “ST” is an indication the tire is for trailer use only. Max. load Dual kg (lbs) at kPa (psi) Cold: This information indicates the maximum load and tire pressure when the tire is used as a dual, that is, when four tires are put on each rear axle (a total of six or more tires on the vehicle). Max.
trailer safety guidelines Wheel rims If the trailer has been struck, or impacted, on or near the wheels, or if the trailer has struck a curb, inspect the rims for damage (i.e. being out of round); and replace any damaged wheel. Inspect the wheels for damage every year, even if no obvious impact has occurred. 3.
trailer safety guidelines Figure L. Trailer to Tow Vehicle Wiring Diagram qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
troubleshooting Troubleshooting (Trash pump) symptom Pump does not take on water. possible problem solution Not enough priming water in the housing? Add water. Engine speed too low? Increase throttle. Strainer plugged? Clean strainer. Suction hose damaged? Replace or repair hose, and clamps. Air leak at suction port? Check that fittings are tight and properly sealed. Pump is located too high above water line? Move pump closer to water. Debris collecting in pump housing? Clean pump housing.
troubleshooting Troubleshooting (engine) symptom Engine will not start or start is delayed, although engine can be turned over. At low temperatures engine will not start. Engine fires but stops soon as starter is switched off. Engine stops by itself during normal operation. Low engine power, output and speed. possible problem solution No Fuel reaching injection pump? Add fuel. Check entire fuel system. Defective fuel pump? Replace fuel pump.
troubleshooting Troubleshooting (engine) - continued symptom Low engine power output and low speed, black exhaust smoke. Engine overheats. possible problem solution Air filter blocked? Clean or replace air filter. Incorrect valve clearances? Adjust valves per engine specification. Malfunction at injector? See engine manual. Too much oil in engine crankcase? Drain off engine oil down to uppermark on dipstick.
NOTES qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
Explanation of Code in Remarks Column The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. NOTICE The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availability of the parts listed. saMple parTs lisT no. 1 2% 2% 3 4 parT no. parT naMe qTY. reMarKs 12345 BOLT .....................1 .....
Suggested Spare Parts qp4tz TRASH PUMP with 1B40U-2203A engine 1 to 3 units Qty. P/N Description 2 ...........KIT4TH..................KIT, MECHANICAL SEAL, O-RINGS 1............1471040030...........IMPELLER 4............0631211159 .........FLOODING CAP 3............50484100...............ELEMENT, AIR CLEANER 1............05088901...............ROPE STARTER 1............01535302...............CAP, FUEL TANK 3............50404900...............KEY, STARTER SWITCH 3............01542702...............
qp4tz pump assy. 63 22 2 23 SEAL KIT 17 32 11 26 41 28 25 4 1 24 7 34 19 39 36 37 27 12 14 3 40 54 38 30 19 4 52 9 8 20 31 51 13 10 46 47 16 5 29 53 6 23 6 page 48 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
qp4tz pump assy. NO. 1 2 3 4 5 6 7 8 9 10 11# 12 13 14 16# 17 19 20 22 23 24# 25# 26# 27# 28 29 30 31 32 34 36 37 38 39 40 41 46 47 51# 52 53 54 63 PART NO.
qP4tzTMP16f/qp4TZTMPXF DECALS 2 3 • READ OWNER’S SERVICE MANUAL BEFORE OPERATING OR SERVICING THIS MACHINE. CAUTION THIS PUMP DESIGNED FOR PUMPING NONHAZARDOUS LIQUIDS • ALWAYS KEEP UNAUTHORIZED, INEXPERIENCED, UNTRAINED PEOPLE AWAY FROM THIS MACHINE. • MAKE SURE ALL SAFETY DEVICES ARE OPERATIONAL BEFORE THIS MACHINE IS STARTED.
qP4tzTMP16f/qp4TZTMPXF DECALS NO. 1 2 3 4 5 6 7 8 PART NO. 27188 DCS02 920203290 B9504500004 29680 29842 49002 1630680004 PART NAME QTY. REMARKS DECAL, DO NOT RUN 1 DECAL, PUMP SAFETY 1 DECAL, CAUTION..............................................1................NPA329 DECAL, WARNING 1 DECAL, MULTIPLE TRAILER, VIN 1 DECAL, TIRE LOADING 1 DECAL, TRLR HITCH/WHEEL WARNING 1 DECAL, DIESEL FUEL ONLY 1 qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
qP4tzT10p DECALS 1 2 4 3 5 6 7 8 page 52 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
qP4tzT10p DECALS NO. 1 2 3 4 5 6 7 8 PART NO. DCS02 920203290 B9504500004 27188 1630680004 9315 29842 49002 PART NAME QTY. REMARKS DECAL, PUMP SAFETY 1 DECAL, CAUTION..............................................1................NPA329 DECAL, WARNING.............................................1 DECAL, DO NOT RUN.......................................
trailer assy. (qP4tzTMP16f/qp4TZTMPXF) 14 8 6 29 15 1 9 27 19 16 18 6 17 33 32 26 2 10 34 4 5 18 17 34 35 13 27 26 36 3 21 22 31 FENDER MOUNT KIT page 54 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
trailer assy. (qP4tzTMP16f/qp4TZTMPXF) NO. PART NO. 1 0205 2 4001 3 9502 4 9503 5 9505 6$% 8 9514 9 10019 10 10133 13 29228 14 29242 15 29243 16 29247 17 29248 18 29249 19 29370 21 29496 22 29572 26 29898 27 29900 29 5065 B 31 29754 32 23297 33 0202 34 0300 B 35 0161 C 36 5283 PART NAME QTY. REMARKS SCREW, HHC 3/8 - 16 x 1 8 WASHER, FLAT USS 3/8 PLD 16 SCREW, HHC 5/8 - 11 x 4-1/2 GR8 2 NUT, NYLOC 5/8 - 11 2 FENDER, 8 x 30 x 13 2 NUT 4 LIGHT ASM.
trailer assy. (TRLR10P) 19 12 13 30 14 20 9 6 27 10 22 8 15 2 3 17 18 1 21 32 31 25 4 24 16 26 33 34 7 23 page 56 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
trailer assy. (TRLR10P) NO. 1# 2 3 4# 6 7 8 9 10 11 12 13 14 15# 16 17 18 19 20 21 22 23 24 25 26 27 30 31 32 33 34 PART NO. 0205 1273 2540 4001 9500 9502 9503 9505 9506 9509 9512 9514 10019 10133 EE45318 29158 29228 29242 29243 29248 29249 29496 29563 29564 29572 29784 5065 B 60018 29754 29755 2764 PART NAME QTY. REMARKS SCREW, HHC 3/8-16 X 1.
axle assy. page 58 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
axle assy. NO. 1 2 3 4 5 6 7% 8% 9% 10% 11% 12% 13% 14% 15 PART NO. 29381U 29381S 29381B 46749 29755 EE45318 491688 114 L44649 L44610 10-215S L68111 L68149 58846 29381H PART NAME QTY. REMARKS KIT, U-BOLT 4 SPRING, 4 LEAF 25.25 2 AXLE BEAM 1 DUST CAP..........................................................2................HENDERSON LUG NUT KIT 1 WHEEL ASSY, ST175/80 D13 2 COTTER PIN 1 SPINDLE NUT....................................................1................HENDERSON OUTER BEARING CONE..............
lifting bail assy. (qP4tzTMP16f/qp4TZTMPXF) 1 2 2 3 4 page 60 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
lifting bail assy. (qP4tzTMP16f/qp4TZTMPXF) NO. 1 2 3 4 PART NO. MPQ102 0105051640 030216400 020316130 PART NAME LIFTING BAIL BOLT 3/4-10 X 2 GRD 8 WASHER, 3/4 NUT, 3/4 X 10 QTY. 1 4 4 4 REMARKS qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
fuel assy. (qp4TZTMPXF) CONNECT TO IGNITION SW. +12VDC CONNECT TO CHASSIS GND. 1 ENGINE FUEL INJECTION PUMP PORT 7 4 ENGINE TEE 5 IN 3 OUT 6 8 12 2 N R TU N E O R TI C U S 13 9 14 OU T AIR IN 10 11 15 16 17 page 62 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
fuel assy. (qp4TZTMPXF) NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 PART NO. 7V3177002 PICKUPTUBE 5284 6109152 6109204 84454 60028 6635BULK 6635BULK EE55144 EM14401 31223FG 6109210 13211 6109170 6109810 6109160 PART NAME CAP PICK UP TUBE BUSHING, HEX PIPE 3/8 X 1/4"BRASS CLAMP FITTING, HOSE ELBOW BRASS 1/4 MALE NPT FUEL HOSE 5/16, 25" FUEL HOSE 1/4, 28" FUEL HOSE 1/4, 65" TANK, FUEL 28 GAL.
fuel assy. (qP4tzTMP16f) CONNECT TO IGNITION SW. +12VDC 7 CONNECT TO CHASSIS GND. ENGINE FUEL INJECTION PUMP PORT 4 ENGINE TEE 2 IN OUT 3 1 E R 8 N R TU O TI C U S N 9 OU T AIR IN 16 10 12 17 13 15 20 14 FUEL TANK BRACKET KIT 5 PIECES 11 18 19 page 64 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
fuel assy. (qP4tzTMP16f) NO. 1 2 3 4 7 8 9 10 11 12 13 14 15 16 17 18 19 20 PART NO. 19340 19089 19086 6109152 6635BULK 6635BULK 6635BULK 19029 EM14401 ANGLEKIT16F 34577# 34590# 34591# 0202 3233 0161 C 2105164 34592 PART NAME QTY. REMARKS FUEL GAUGE 1 TUBE, TANK SUCTION 1 FITTING, STR-1/4MP 1 CLAMP 9 FUEL HOSE, 25" 1 FUEL HOSE, 28" 1 FUEL HOSE, 60" 1 TANK, FUEL 16 GAL. 1 FUEL PUMP 1 ANGLE KIT.........................................................1................
battery assy. (qP4tzTMP16f/qp4TZTMPXF) 1 2 9 3 7 8 5 4 6 page 66 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
battery assy. (qP4tzTMP16f/qp4TZTMPXF) NO. 1 2 3 4 5 6 7 8 9 PART NO. 34506 0202 0300 B 3233 0161 C 2105164 34584 34597 34596 PART NAME BATTERY BOX SCREW, HHC 5/16-18X1 WASHER, FLAT 5/16 MED WASHER, FENDER 3/8 X 1 1/2 WASHER, LOCK 5/16 MED NUT, 5/16 X 18 BRACKET, BATTERY POSITIVE BATTERY CABLE NEGATIVE BATTERY CABLE QTY. 1 2 2 2 2 2 1 1 1 REMARKS qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
PUMP assy. (qP4tzTMP16f/qp4TZTMPXF) 11 4 3 1 5 2 3 4 7 8 6 6 43 8 48 9 10 page 68 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
PUMP assy. (qP4tzTMP16f/qp4TZTMPXF) NO. 1 2 3 4 5 6 7 8 9 10 11 PART NO. 24592140210014 0105051040 0451250100 0205450100 0723302546 29175 6109184 6109170 6109180 6109160 1B40U-2203A PART NAME ENGINE BASE (NO BATTERY TRAY) BOLT (PUMP), M10 X 40 WASHER, LOCK M10 NUT, M10 CUSHION RUBBER BRACKET, CHANNEL BOLT, HEX 1/2-13 X 2-1/2 WASHER, FLAT 1/2" WASHER, LOCK 1/2" NUT, HEX 1/2-13 ENGINE, HATZ QTY. 1 2 6 8 4 2 4 8 4 4 1 REMARKS qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
PUMP and battery assy. (qp4tzt10P) 14 15 13 12 11 17 16 1 4 2 3 4 6 3 5 7 8 6 43 48 8 9 10 page 70 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
PUMP and battery assy. (qp4tzt10P) NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 PART NO.
HATZ 1B40U-2203a — spare parts kit 1 2 3 4 page 72 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
HATZ 1B40U-2203a — spare parts kit NO. 1 2 3 4 PART NO. 01679202 01679302 01679400 01679510 PART NAME GASKET SET CYL.HEAD GASKET SET CRK.CASE 1000H MAINTE.KIT EMERGENCY KIT QTY. 1 1 1 1 REMARKS qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
Hatz 1b40u-2203a — crankcase kit 32 SEALING AND BONDING ADHESIVES 33 10 11 DH 14 20 19 21 15 13 31 8 7 17 9 16 30 30 19 20 31 4 5 6 21 5 25 26 22 24 27 36 26 29 23 37 38 1 Parts not available separately page 74 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
Hatz 1b40u-2203a — crankcase kit CRANKCASE KIT no. D H 1 2# 3# 4# 5# 6# 7# 8# 9# 10# 11# 12# 13# 14 15 16 17$ 18$ 19 20 21 22 23 24 25 26 27 29 30 31 32 33 35% 36% 37% 38% parT no. 50223300 50282501 01679100 04141600 40002600 01336400 50502801 50440300 50249102 50062400 50062300 40022300 50479000 04144401 01342800 04125000 50208500 04219500 04144701 04141500 01542702 50373100 50001600 05036900 04163000 50478900 04133800 50564200 01555800 03568701 50475901 05148200 50170700 parT naMe qTY.
Hatz 1b40u-2203a — compensation of masses assy. page 76 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
Hatz 1b40u-2203a — compensation of masses assy. COMPENSATION OF MASSES ASSY. no. 1 parT no. 01349201 parT naMe COMPENSATING SHAFT qTY. 1 reMarKs qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
Hatz 1b40u-2203a — crankshaft assy. page 78 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
Hatz 1b40u-2203a — crankshaft assy. CRANKSHAFT ASSY. no. 3# 9 11 12# parT no. 50529700 05141600 01359201 parT naMe qTY. reMarKs COVER 14 1 KEY 6,35X61 1 CRANKSHAFT ASSY .......................................1................INCLUDES ITEMS W/ # CRANKSHAFT...................................................1................NOT SOLD SEPARATELY qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
Hatz 1b40u-2203a — camshaft assy. 1 4 7 6 4 6 3 5 9 10 11 12 13 14 Parts not available separately page 80 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
Hatz 1b40u-2203a — camshaft assy. CAMSHAFT ASSY. no. 1 3# 4# 5# 6# 7# 8# 9 10 11 12 13 14 parT no. 01345003 01326401 50123200 01326600 50255300 01326501 04121700 04112100 04112200 04112300 04125100 04125200 parT naMe qTY. reMarKs CAMSHAFT ASSY. ............................................1................INCLUDES ITEMS W/# CAMLEVER 1 SHIM 5X10X0.5 2 FLYWEIGHT 1 LOCKING WASHER 3.2 2 F.WEIGHT HAND-ST. 1 CAMSHAFT .......................................................1................
Hatz 1b40u-2203a — piston, conrod, cylinder assy. 6 8 5 1 3 4 ; 10 9 12 13 11 Parts not available separately page 82 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
Hatz 1b40u-2203a — piston, conrod, cylinder assy. PISTON, CONROD, CYLINDER ASSY. no. 1 2#% 3#% 4#% 5#% 6# 7# 8 9 10$ 11$ 12 13 parT no. 01374810 50482300 50527100 01374701 50479301 01679610 01343500 04100500 01679800 01692700 parT naMe qTY. reMarKs PISTON ASSY 88 EPA2 ....................................1................INCLUDES ITEMS W/ % PISTON ..............................................................1................
Hatz 1b40u-2203a — cylinder head assy. 30 29 29 16 17 18 28 28 16 19 20 15 15 24 14 23 13 44 45 46 12 11 7 3 18 22 21 16 17 16 19 21 5 15 14 20 7 44 45 46 13 12 11 1 3 5 43 6 42 6 10 9 34 34-1 35 35-1 36 36-1 37 37-1 38 39 40 Parts not available separately page 84 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
Hatz 1b40u-2203a — cylinder head assy. CYLINDER HEAD ASSY. no. 1 2# 3# 5 6 7 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 28 29 30 31 32 34 34-1 35 35-1 36 36-1 37 37-1 38 39 40 42 43 44 45 46 parT no.
Hatz 1b40u-2203a — oil pump and governor assy. page 86 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
Hatz 1b40u-2203a — oil pump and governor assy. OIL PUMP AND GOVERNOR ASSY. no. D H M 1 2# 3# 4# 5# 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 parT no.
Hatz 1b40u-2203a — timing cover assy. 46 1 45 48 12 13 42 46 42 43 47 44 12 42 13 51 11 10 40 39 6 9 41 3 49 38 37 7 4 5 36 15 8 35 29 33 53 24 34 25 32 26 27 30 28 31 DE HK Parts not available separately page 88 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
Hatz 1b40u-2203a — timing cover assy. TIMING COVER ASSY. no. D E H K 1 2# 3# 4# 5# 6# 7# 8# 9# 10# 11# 12 13 15# 16$ 17$ 18$ 19$ 20$ 21$ 22$ 24# 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 51# 53 parT no.
Hatz 1b40u-2203a — blower and flywheel assy. page 90 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
Hatz 1b40u-2203a — blower and flywheel assy. BLOWER AND FLYWHEEL ASSY. no. 1 2 3 4 5 6 7 parT no. 04205800 50003400 50327300 04153901 50205600 04155101 50502501 parT naMe BLOWER RING SPRING WASHER A4 ALLEN SCREW M4X20 FLYWHEEL ROLL PIN 10 X 12 PLATE ALLEN SCREW M8X35 qTY. 1 6 6 1 1 1 6 reMarKs qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
Hatz 1b40u-2203a — injection equipment assy. 66 51 52 68 55 54 4 50 49 D 53 54 2 1 35 45 60 43 67 62 29 63 30 64 31 65 61 32 28 33 34 57 58 59 36 56 37 38 39 40 41 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 page 92 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
Hatz 1b40u-2203a — injection equipment assy. INJECTION EQUIPMENT ASSY. no. D 1 2% 3%& 4%& 5%& 8% 9% 10% 11% 12% 13% 14% 15% 16% 17% 18% 19% 20% 21% 22% 23% 24% 25% 26% 27% 28% 29$% 30$% 31$% 32$% 33$% parT no. 50223300 01389700 01680600 05070601 50436400 50436500 50436600 50436700 50436800 50436900 50437000 50437100 50437200 50437300 50437400 50437500 50437600 50437700 50437800 50437900 50438000 50438100 50438200 50438300 01389900 50566600 parT naMe qTY. reMarKs LOCTITE221 50ML 1 INJECTOR CPL. ..........
Hatz 1b40u-2203a — recoil starter assy. SEALING AND BONDING ADHESIVES 20 DK 22 2 4 7 11 15 16 8 9 6 5 13 14 12 18 21 17 1 19 Not available separately page 94 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
Hatz 1b40u-2203a — recoil starter assy. RECOIL STARTER ASSY. no. D K 1 2% 3%# 4%# 5% 6% 7% 8% 9% 10%$ 11% 12% 13% 14% 15%$ 16% 17 18 19 20 21 22% parT no. 50223300 50342601 01851900 01497800 03665200 05045201 01569300 50081200 50062700 05088901 05044901 05045001 50146300 50390701 05044800 05061300 50062700 50170900 04155000 05298100 01548800 50514600 parT naMe qTY. reMarKs LOCTITE221 50ML 1 HOCHTEMP.FETT 400G 1 RECOIL-STARTER ...........................................1................
Hatz 1b40u-2203a — air ducting assy. (a) 20 21 19 2 17 18 22 1 SEALING AND BONDING ADHESIVES 13 12 24 G 15 4 23 12 6 25 23 12 16 9 10 11 8 11 10 9 Parts not available separately page 96 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
Hatz 1b40u-2203a — air ducting assy. (a) AIR DUCTING ASSY. (A) no. G 1 2# 3# 4 5$ 6$ 8$ 9 10 11 12 13 14% 15% 16 17 18 19 20 21 22 23 24 25 parT no. 50256501 01853100 05152100 01345400 04144200 50334800 50445401 50441600 50163801 50528100 01345300 04144200 50495000 50144400 50170900 03354600 01698200 50334800 03577200 50144500 04060600 05001200 parT naMe qTY. reMarKs LOCTITE IS407 20G 1 HOOD ASSY......................................................1................INCLUDES ITEM W/ # HOOD ................
Hatz 1b40u-2203a — air ducting assy. (B) 1 3 SEALING AND BONDING ADHESIVES 12 10 89 31 39 38 F 4 7 6 11 24 29 28 30 24 36 16 22 29 17 16 28 12 27 26 24 11 10 10 34 24 32 28 23 35 34 16 24 11 5 33 21 10 17 16 37 16 20 16 17 18 19 17 13 14 Parts not available separately page 98 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
Hatz 1b40u-2203a — air ducting assy. (B) AIR DUCTING ASSY. (B) no. F 1 2# 3 4# 5# 6# 7# 8 9 10 11 12 13 14 15$% 16$% 17$% 18 19 20$% 21 22 23 24 26 27 28 29 30 31 32 33 34 35 36 37% 38 39# parT no.
Hatz 1b40u-2203a — crankcase breathing system assy. SEALING AND BONDING ADHESIVES 4 E F H 1 3 5 8 7 6 Parts not available separately page 100 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
Hatz 1b40u-2203a — crankcase breathing system assy. CRANKCASE BREATHING SYSTEM ASSY. no. E F H 1 2# 3# 4# 5# 6# 7 8 parT no. 50223400 50223800 50282501 01885800 05102900 05098100 05197200 05196000 01626900 50456800 parT naMe qTY. reMarKs LOCTITE648 10ML 1 TECHNICOLL8058 0.75KG 1 SILICON 30ML 1 CRANKCASE BREATHER CP ..........................1................INCLUDES ITEMS W/ # OIL SEPARATOR ...............................................1................
Hatz 1b40u-2203a — air filter assy. page 102 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
Hatz 1b40u-2203a — air filter assy. AIR FILTER ASSY. no. 1 2# 3# 4# 5 6 7# 8 9 10$ 11$ 12 13 14 15 16 17 18 37 38 parT no. 01637410 05167700 05166200 50095100 50171500 50484100 50454300 01822000 05158000 50435800 50452200 04150800 04146800 05149900 05149800 04215200 04215300 05309300 parT naMe qTY. reMarKs AIR FILTER HOUSING ASSY............................1................INCLUDES ITEMS W/ # AIR FILTER HOUSING ......................................1................
Hatz 1b40u-2203a — exhaust silencer assy. page 104 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
Hatz 1b40u-2203a — exhaust silencer assy. EXHAUST SILENCER ASSY. no. 1 2# 3# 4# 7 8 9 10 11 12 13 14 15 16 17 parT no. 01682501 01732701 50403900 50474200 50114300 05177900 01655601 50144500 40028300 01629000 50422500 50114300 50170900 50177100 parT naMe qTY. reMarKs EXHAUST SILENCER ASSY.............................1................INCLUDES ITEMS W/ # EXHAUST SILENCER .......................................1................
Hatz 1b40u-2203a — starter, alternator assy. page 106 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
Hatz 1b40u-2203a — starter, alternator assy. STARTER, ALTERNATOR ASSY. no. 1 2 3 4 5 7 8 9 10# 11# 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 parT no. 50402300 50170900 50144500 04099100 50483500 04161502 04151100 50495100 50081900 50547000 50236600 50081200 50165400 50148100 05100701 01663000 05182912 50144400 50439500 50344700 50025400 50120000 03714100 50095100 50392900 50402100 parT naMe qTY. reMarKs ALLEN SCREW M6X70 2 SPRING WASHER 6 4 FLAT WASHER 6.4 3 RETAINING BRACKET 1 EL.
Hatz 1b40u-2203a — electric equipment, wiring assy. page 108 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
Hatz 1b40u-2203a — electric equipment, wiring assy. ELECTRIC EQUIPMENT, WIRING ASSY. no. 1 1 2# 3#$ 4#$ 5#$ 6 7#$ 8# 9# 10 11 12 13 14 15 16 17 19 parT no. 01560802 01796500 50384401 05126402 50404900 50149100 50144500 01785900 50167400 50439500 01546800 01778000 50469100 01546500 parT naMe qTY. reMarKs INSTRUMENT BOX ...........................................1................INCLUDES ITEMS W/ # INSTRUMENT BOX, AUTOMATIC 1 STARTING SWITCH ..........................................1................
Hatz 1b40u-2203a — speed control assy. page 110 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
Hatz 1b40u-2203a — speed control assy. SPEED CONTROL ASSY. no. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 parT no. 05141200 50144400 50025000 50483000 50511900 50216300 05117700 50094300 50484600 50483100 50025000 50342400 50148100 05189600 03599600 50328300 50208500 05117610 50423900 50380800 03292900 parT naMe ADJUSTING SCREW HEXAGON NUT M6 HEX SCREW M 4X10 CABLE CLAMP ALLEN SCREW M 5X30 WASHER 5.3 LEVER HEXAGON NUT M5 PRESSURE SPRING CABLE CLAMP 2.
Hatz 1b40u-2203a — engine stop device assy. page 112 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
Hatz 1b40u-2203a — engine stop device assy. ENGINE STOP DEVICE ASSY. no. 1 2# 3# 4# 5# 6 8$ 9$ 11$ 12$ 13$ parT no. 01786400 50446900 50329000 05221301 01786000 01547101 05223200 40021500 40021400 parT naMe qTY. reMarKs STOP DEVICE ASSY ........................................1................INCLUDES ITEMS W/ # STOP DEVICE ...................................................1................NOT AVAILABLE SEPARATELY ALLEN SCREW, M4 X 16 4 O-RING 1 STICKER LABEL 1 LIFT, MGT. EG. STOP ASSY ..................
Hatz 1b40u-2203a — engine special epa equipment page 114 — qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
Hatz 1b40u-2203a — engine special epa equipment ENGINE SPECIAL EPA EQUIPMENT no. 1 2 3 4 5 6 parT no. 04198800 04202600 04170600 50495000 04195700 05201500 parT naMe GRUB SCREW PLUG PLUG SCREW M6 X 12 GUARD CLOSING PLUG qTY. 1 1 1 1 1 1 reMarKs qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
Terms and Conditions of Sale — Parts paYMenT TerMs 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Multiquip reserves the right to quote and sell direct to Government agencies, and to Original Equipment Manufacturer accounts who use our products as integral parts of their own products. a. speCial eXpeDiTing serviCe Terms of payment for parts are net 30 days.
notes qp4tzT10P/TMP16F/TmpXf trash pump • operation & parts manual — rev.
Operation and Parts Manual HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING United StateS Multiquip Corporate Office 18910 Wilmington Ave. Carson, CA 90746 Contact: mq@multiquip.com MQ Parts Department Tel.
