OPERATION AND PARTS MANUAL AWD POWER BUGGY MODEL WBH-16EAWD (ELECTRIC START) Revision #5 (01/05/07) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
WBH-16EAWD POWER BUGGY — PROPOSITION 65 WARNING Engine exhaust and some of its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Some examples of these chemicals are: Leadfromlead-basedpaints. Crystallinesilicafrombricks. Cementandothermasonryproducts. Arsenicandchromiumfromchemically treatedlumber.
NOTE PAGE MQ-WHITEMAN WBH-16EAWD POWER BUGGY — PARTS & OPERATION MANUAL — REV.
TABLE OF CONTENTS MQ-Whiteman WBH-16EAWD Power Buggy Proposition 65 Warning ............................................ 2 Table Of Contents .................................................... 4 Parts Ordering Procedures ...................................... 5 Specifications (AWD Power Buggy) ......................... 6 Specifications (Engine) ............................................ 7 Dimensions .............................................................. 8 Safety Message Alert Symbols ............
www.multiquip.com Effective: January 1st, 2006 PARTS ORDERING PROCEDURES Ordering parts has never been easier! Choose from three easy options: Best Deal! Order via Internet (Dealers Only): If you have an MQ Account, to obtain a Username and Password, E-mail us at: parts@multiquip.com. Order parts on-line using Multiquip’s SmartEquip website! ■ View Parts Diagrams ■ Order Parts ■ Print Specification Information To obtain an MQ Account, contact your District Sales Manager for more information.
WBH-16EAWD POWER BUGGY — SPECIFICATIONS (AWD POWER BUGGY) TABLE 1. SPECIFICATIONS (POWER BUGGY) Model WBH-16EAWD Wheelbase 44 in. (1117.6 mm) Overall Length 103 in. (2616.2 mm) Overall Width- Dual Wheels 43.25 in. (1098.6 mm) Overall Width - Single Wheels 30.25 in. (738.65 mm) Overall Height 53 in. (1346.2 mm) Operating Weight 1,200 lbs. (544.2 kg.) Bucket Capacity 16 cu. ft. Water Level (.59 cu. yd.) Weight Capacity 2500 lbs.
WBH-16EAWD POWER BUGGY — SPECIFICATIONS (ENGINE) TABLE 2. SPECIFICATIONS (VANGUARD ENGINE) Model 3504471375E1T1001 2.82 x 2.75 in. Bore X Stroke 71.88 x 69.85 mm Displacment 5 7 0 cc Maximum Power 18.0 hp (3,600 r pm) 31.70 ft-lbs. (2,800 r pm) Maximum Torque 14.37 kgf-m (2,800 r pm) Idle Speed 1,400 ± r pm Maximum No Load RPM 3600 ± 100 r pm 1.64 gals./hr. Specific Fuel Consumption (6.05 liters/hr.) 5.5 gallons Fuel Tank Capacity (20.8 liters) 3.52 pints Crankcase Oil Capacity (1.
WBH-16EAWD POWER BUGGY — DIMENSIONS Figure 2. WBH-16EAWD Power Buggy Dimensions (Side-View) Figure 3. WBH-16EAWD Power Buggy Dimensions (Rear-View) PAGE 8 — MQ-WHITEMAN WBH-16EAWD POWER BUGGY — PARTS & OPERATION MANUAL — REV.
NOTE PAGE MQ-WHITEMAN WBH-16EAWD POWER BUGGY — PARTS & OPERATION MANUAL — REV.
WBH-16EAWD POWER BUGGY — SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others. This Owner's Manual has been developed to provide complete instructions for the safe and efficient operations of the NOTE MQ Whiteman Model WBH-16EAWD Power Buggy.
WBH-16EAWD POWER BUGGY — SAFETY MESSAGE ALERT SYMBOLS Accidental Starting Respiratory Hazard ALWAYS place the engine ON/OFF switch in the OFF position, and/or disconnect the spark plug lead before servicing the engine or equipment. Ground the lead to prevent sparks that could ignite a fire. ALWAYS wear approved respiratory protection. Equipment Damage Messages Sight and Hearing hazard ALWAYS wear approved eye and hearing protection.
WBH-16EAWD POWER BUGGY — RULES FOR SAFE OPERATION WARNING: Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the MQ Whiteman WBH-16EAWD Power Buggy: GENERAL SAFETY ■ DO NOT operate or service this equipment before reading this entire manual.
WBH-16EAWD POWER BUGGY — RULES FOR SAFE OPERATION GENERAL SAFETY ■ Always read, understand, and follow procedures in Operator’s Manual before attempting to operate equipment. ■ Always be sure the operator is familiar with proper safety precautions and operating techniques before using the saw. ■ Stop the engine when leaving the AWD Power Buggy unattended. ■ Block the unit when leaving or when using on a slope. ■ Maintain this equipment in a safe operating condition at all times.
WBH-16EAWD POWER BUGGY — RULES FOR SAFE OPERATION AWD POWER BUGGY TRANSPORTATION SAFETY Emergencies ■ When lifting of the AWD Power Buggy is required, use a properly rated forklift to lift the AWD Power Buggy. Forklift pockets are provided on the power buggy's frame. Make sure the forklift arms are insert into the power buggy's fork lift pockets a minimum of 24-inches. ■ ALWAYS know the location of the nearest fire extinguisher.
WBH-16EAWD POWER BUGGY — OPERATION AND SAFETY DECALS Machine Safety Decals The WBH-16EAWD Power Buggy is equipped with a number of safety decals (Figure 1). These decals are provided for operator safety and maintenance information. The illustrations below show these decals as they appear on the AWD Power Buggy. Should any of these decals become unreadable, replacements can be obtained from you dealer. Figure 1.
WBH-16EAWD POWER BUGGY — GENERAL INFORMATION The MQ Whiteman All-Wheel Drive AWD Power Buggy, Model WBH-16EAWD (electric start) are intended for the transportation of concrete and material handling. The AWD Power Buggy is equipped with a 6-inch dump height which provides clearance and enables the operator to maneuver over any form height.
WBH-16EAWD POWER BUGGY — COMPONENTS Figure 4. AWD Power Buggy Components 1. Tub or Bucket – Used for the transportation of material. Tub holds approximately 16 cubic feet ( .59 cubic yards) of water. 11. Dump Pedal - Use this pedal to place the tub in the dump position (vertical), press pedal a second time to return tub to the travel position (horizontal) 2. Handle Bar (Steering) - When driving the AWD Power Buggy, use both hands and hold onto both handle bar grips.
WBH-16EAWD POWER BUGGY — BASIC ENGINE COMPONENTS Figure 5. Briggs & Stratton 18HP Vanguard Engine Controls and Components INITIAL SERVICING The engine (Figure 5) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers Engine manual for instructions & details of operation and servicing. 1. Oil Fill Cap – Remove cap to refill or replace oil with recommended type as listed in Table 3. Make sure cap is tightened securely. DO NOT over fill. 2.
WBH-16EAWD POWER BUGGY — INSPECTION (ENGINE) Before Starting 1. Read safety instructions at the beginning of manual. 2. Clean the AWD POWER BUGGY, removing dirt and dust, particularly the engine cooling air inlet, carburetor and air cleaner. 3. Check the air filter for dirt and dust. If air filter is dirty, replace air filter with a new one as required. Figure 7. Engine Oil Dipstick (Oil Level) 4. Check carburetor for external dirt and dust. Clean with dry compressed air. 5.
WBH-16EAWD POWER BUGGY — INSPECTION (BUGGY) Explosive Fuel Gasoline Check 1. Remove the gasoline cap (Figure 8) located on top of fuel tank. 2. Visually inspect to see if fuel level is low. If fuel is low, replenish with unleaded fuel. Dump Cylinder Check Check the power buggy's dump cylinder as outline in the operation section of this manual. Make sure that both zerk fittings for the dump cylinder have been lubricated. Hydraulic Oil Check 1.
WBH-16EAWD POWER BUGGY — INITIAL START-UP CAUTION: DO NOT attempt to operate the AWD Power Buggy until the Safety, General InformationD and Inspection sections have been read and understood. The following start-up procedure makes reference to a BRIGGS AND STRATTON engine. ELECTRIC START 5. Push the Choke Knob (Figure 13) inward to the OPEN position slowly before operating the AWD Power Buggy. Figure 13. Choke Knob (Open Position) 1.
WBH-16EAWD POWER BUGGY — SHUT-DOWN PROCEDURE Shutdown Procedure (Normal) Emergency Shutdown Procedure Correct shutdown is important to safe operation. Follow these general steps: 1. Come to a FULL stop. The AWD Power Buggy is equipped with a safety kill switch. This switch is located on the right side of the handle bar (Figure 15). 2. Engage the parking brake (Figure 16). 1. Press the power buggy's kill switch (Figure 15) and listen for the engine to stop. 3.
WBH-16EAWD POWER BUGGY — OPERATION AWD Power Buggy Operation Loading Checking The Work Area If possible, plan to load, unload and turn of flat level ground. When you travel with a load, keep the speed reasonable for the load and the terrain to be traveled. The AWD Power Buggy is less stable when traveling with a load. Inspect the surface over which you will travel. Look for holes, drop-offs and obstacles. Look for rough spots. Look for weak spots on docks, ramps or floor.
WBH-16EAWD POWER BUGGY — OPERATION AWD Power Buggy Operation WARNING: 4. Place the power buggy's direction lever (Figure 18) in the forward direction. Operator must ALWAYS wear the appropriate protective equipment and clothing while operating the AWD Power Buggy. Pre-Check 1. Engage the parking brake lever (Figure 16) and attempt to rock the buggy back and forth. Figure 16.
WBH-16EAWD POWER BUGGY — OPERATION All-Wheel Drive (AWD) System Tub (Bucket) Dumping When operating the AWD Power Buggy in rough or uneven terrain, use the AWD/2WD switch (Figure 20) on the right hand side of the operators console. The hydraulic dump (Figure 22) can be controlled by a hand lever or foot pedal. 1. Set the switch to AWD to engage and lock the AWD system in place. 2. Set the switch to 2WD to return the buggy to normal operation. 1.
WBH-16EAWD POWER BUGGY — OPERATION WARNING: Clean-up When traveling on inclines (Figure 23), slopes, ramps and downgrades exercise extreme caution. ALWAYS make sure you can see the dump site. Keep work surfaces and engine compartments clean. Clean steps, pedals and floor. Remove any grease or oil. Brush away dirt or mud. During winter conditions, scrape away snow and ice. Remember, slippery surfaces can be hazardous. Be sure the landing point you intend to use can safely support the load.
WBH-16EAWD POWER BUGGY — MAINTENANCE Engine Refer to the Briggs and Stratton engine owner’s operating manual for specific information. Check engine oil after every 10 hours of operation and maintain proper levels. Drain oil after every 50 hours of operation and refill with grade of oil recommended below: Above 40o F. (13oC.) - S.A.E. 30 Below 40oF. (13oC.) - S.A.E.
WBH-16EAWD POWER BUGGY — MAINTENANCE Tires/Wheels/Lug Nuts CAUTION: Tires and wheels are a very important and critical components of the trailer. When specifying or replacing the trailer wheels it is important the wheels, tires, and axle are properly matched. CAUTION: DO NOT attempt to repair or modify a wheel. DO NOT install an inter-tube to correct a leak through the rim.
WBH-16EAWD POWER BUGGY — TROUBLESHOOTING (BUGGY) Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, refer to Table 6 (Power Buggy Troubleshooting) as a basic guideline for troubleshooting the AWD Power Buggy. If the problem cannot be remedied, contact Multiquip's Buisness Office or Service Department TABLE 6.
WBH-16EAWD POWER BUGGY — TROUBLESHOOTING (ENGINE) Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, refer to Table 7 (Engine Troubleshooting) as a basic guideline for troubleshooting the AWD Power Buggy's engine. If the problem cannot be remedied, contact Multiquip's Buisness Office or Service Department TABLE 7. ENGINE TROUBLESHOOTING SYMPTON Difficult to star t, "fuel is available, but no SPARK at spark plug".
WBH-16EAWD POWER BUGGY — TROUBLESHOOTING (ENGINE) TABLE 7. ENGINE TROUBLESHOOTING (CONTINUED) SYMPTON "Weak in power" compression is proper and does not misfire. POSSIBLE CAUSE SOLUTION Air cleaner not clean? Clean or replace air cleaner Improper level in carburetor? Check float adjustment, re-build carbureator. Defective Spark plug? Clean or replace spark plug. Defective Spark plug? "Weak in power" compression is proper but misfires. Engine overheats. Rotational speed fluctuates.
WBH-16EAWD POWER BUGGY — HYDRAULIC SYSTEM DIAGRAM Figure 26. Hydraulic System Diagram PAGE 32 — MQ-WHITEMAN WBH-16EAWD POWER BUGGY — PARTS & OPERATION MANUAL — REV.
WBH-16EAWD POWER BUGGY — ELECTRIC WIRING DIAGRAM Figure 27. Electric Wiring Diagram MQ-WHITEMAN WBH-16EAWD POWER BUGGY — PARTS & OPERATION MANUAL — REV.
WBH-16EAWD POWER BUGGY — HYDRAULIC HOSE CONNECTIONS B D G D E A F E C DIRECTIONAL VALVE B F A 4 G C 1 I 2 H CHASSIS 1 2 3 4 H DRIVE MOTORS NOTES: AWD STEERING MOTOR INDICATES FRONT OF MACHINE I HOSES SHADED FOR VISUAL CLARITY SEE HYDRAULIC DRIVE ASSY., PAGE 38 1 HYDRAULIC HOSE, ITEM 28 2 HYDRAULIC HOSE, ITEM 5 3 HYDRAULIC HOSE, ITEM 22 4 HYDRAULIC HOSE, ITEM 2 Figure 28.
NOTE PAGE MQ-WHITEMAN WBH-16EAWD POWER BUGGY — PARTS & OPERATION MANUAL — REV.
WBH-16EAWD POWER BUGGY — EXPLANATION OF CODE IN REMARKS COLUMN The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availibility of the parts listed. Sample Parts List: NO.
WBH-16EAWD POWER BUGGY — SUGGESTED SPARE PARTS WBH-16EAWD POWER BUGGY 1 to 3 Units QTY. 1 .............. 1 .............. 1 .............. 2 .............. 1 .............. 1 .............. 5 .............. 1 .............. 1 .............. 1 .............. 1 .............. 1 .............. 1 .............. 1 .............. PART NO. PART NAME 508667 ............. FILTER, HYDRAULIC OIL 18035 ............... PUMP, HYDROSTATIC 511719 ............. COUPLING, ENGINE SHAFT 18316 ...............
WBH-16EAWD POWER BUGGY — DECAL PLACEMENT DECAL PLACEMENT PAGE 38 — MQ-WHITEMAN WBH-16EAWD POWER BUGGY — PARTS & OPERATION MANUAL — REV.
WBH-16EAWD POWER BUGGY — DECAL PLACEMENT DECAL PLACEMENT NO. 1 2 3 4 5 6 7 8 9 10 11 12 PART NO. TBD 18252 EM985 513608 18245 18247 18248 18213 18214 513609 18195 18225 PART NAME QTY. REMARKS DECAL, WPB-16 2 DECAL, MQ WHITEMAN 2 DECAL, HYDRAULIC OIL 1 DECAL, LIFTING HOOK 3 DECAL, FORKLIFT LIFTING 6 DECAL, CRUSH WARNING 1 DECAL, HOT SURFACE WARNING 1 DECAL, BUCKET DUMP LEVER ........................ 1 ......... PART OF FUEL TANK COVER DECAL, TRAVEL LEVER DIRECTION ................ 1 .........
WBH-16EAWD POWER BUGGY — HYDRAULIC DRIVE ASSY. HYDRAULIC DRIVE ASSY. PAGE 40 — MQ-WHITEMAN WBH-16EAWD POWER BUGGY — PARTS & OPERATION MANUAL — REV.
WBH-16EAWD POWER BUGGY — HYDRAULIC DRIVE ASSY. HYDRAULIC DRIVE ASSY. NO. 1 2 3 4 5 6 7 8 9 * 10 * 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 PART NO. 511810 513606 3365 512201 513605 512189 492527 18029 511692 18237 492584 18190 491689 PT018038 18040 3365 505718 18011 PE449105 492600 492584 18027 513602 513547 513601 513603 512202 513607 516528 PART NAME QTY.
WBH-16EAWD POWER BUGGY — HYDRAULIC PUMP ASSY. HYDRAULIC PUMP ASSY. PAGE 42 — MQ-WHITEMAN WBH-16EAWD POWER BUGGY — PARTS & OPERATION MANUAL — REV.
WBH-16EAWD POWER BUGGY — HYDRAULIC PUMP ASSY. HYDRAULIC PUMP ASSY. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 PART NO. 18035 511808 3365 18256M 18258M 18261M 513599 512190 18257M 508667 508664 511799 3322 18058 18262M 18266M 513598 18265M PART NAME PUMP, HYDRAULIC ADAPTER, STRAIGHT ADAPTER, STRAIGHT HOSE, PUMP TO DUMP VALVE HOSE, FILTER TO PUMP HOSE, PUMP TO TANK HOSE, PUMP TO DIREC.
WBH-16EAWD POWER BUGGY — DUMP CYLINDER ASSY. DUMP CYLINDER ASSY. PAGE 44 — MQ-WHITEMAN WBH-16EAWD POWER BUGGY — PARTS & OPERATION MANUAL — REV.
WBH-16EAWD POWER BUGGY — DUMP CYLINDER ASSY DUMP CYLINDER ASSY. NO. 1 2 3 4 5 6 7 8 9 PART NO. 18022 491705 511803 18020 511804 512234 511806 18064 506191 PART NAME PISTON, HYD. DUMP ZERK FITTING ADAPTER, ELBOW HOSE, DUMP VALVE TO HYD. PISTON ADAPTER, STRAIGHT ADAPTER, ELBOW ADAPTER, STRAIGHT VALVE, DUMP ADAPTER, ELBOW QTY. 1 2 2 2 2 1 1 1 1 REMARKS MQ-WHITEMAN WBH-16EAWD POWER BUGGY — PARTS & OPERATION MANUAL — REV.
WBH-16EAWD POWER BUGGY — MANIFOLD ASSY. MANIFOLD ASSY. PAGE 46 — MQ-WHITEMAN WBH-16EAWD POWER BUGGY — PARTS & OPERATION MANUAL — REV.
WBH-16EAWD POWER BUGGY — MANIFOLD ASSY MANIFOLD ASSY. NO. 1 2 3 4 * 5 6 7 * 8 * 9 * 10 * 11 * 12 * 13 * 14 * 15 * 16 PART NO. 18045 3322 3365 509103 3365 513548 18159 18147 18161 25539 18134 18174 18034 18093 18095 18127 PART NAME QTY. REMARKS MANIFOLD BLOCK 1 ADAPTOR, ELBOW 3 ADAPTOR, ELBOW 1 ADAPTOR 1 ADAPTOR, ELBOW 2 ADAPTOR, ELBOW 1 ADAPTOR 3 ADAPTOR 1 ADAPTOR 2 ADAPTOR 2 BLOCK VALVE 2 SOLENOID 1 NUT, SOLENOID 3 SOLENOID, CONTROL 2 COIL, SOLENOID 3 MANIFOLD ASSEMBLY ...................................
WBH-16EAWD POWER BUGGY — PUMP AND COUPLING ASSY. PUMP AND COUPLING ASSY. PAGE 48 — MQ-WHITEMAN WBH-16EAWD POWER BUGGY — PARTS & OPERATION MANUAL — REV.
WBH-16EAWD POWER BUGGY — PUMP AND COUPLING ASSY. PUMP AND COUPLING ASSY. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 PART NO. 492472 511719 503112 18112 492598 492596 492355 492583 492313 512196 506250 513518 692061 807742 492368 505679 492582 492367 808033 PART NAME SCREW, ALLEN HEAD 3/8-16 X 3/4 COUPLING, ENGINE SHAFT SCREW, HEX 3/8-16 X 2-3/4 FAN WASHER, FLAT 3/8 WASHER, FLAT 1/4 SCREW, HHC 1/4-20 X 1/2 NUT, NYLOC 3/8-16 SCREW, HHC 3/8-16 X 1-1/2 BRACKET, HYD.
WBH-16EAWD POWER BUGGY — TUB ASSY. TUB ASSY. PAGE 50 — MQ-WHITEMAN WBH-16EAWD POWER BUGGY — PARTS & OPERATION MANUAL — REV.
WBH-16EAWD POWER BUGGY — TUB ASSY. TUB ASSY. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PART NO. 18004 492313 512193 492598 490957 18130 18129 18022 492365 492597 492583 492582 512279 18099 PART NAME TUB, PLASTIC SCREW, HHC 3/8-16 X 1-1/2 WASHER, FLAT 3/8 LARGE WASHER, FLAT 3/8 RING, SNAP PIN, HYD. PISTON CROSS PIN, TUB FRAME CROSS CYLINDER, HYDRAULIC DUMP SCREW, HHC 5/16-18 X 1-1/4 WASHER, FLAT 9.5 X 22.2 NUT, NYLOC 3/4-16 NUT, NYLOC 5/16-18 SUPPORT, BUM STOP FRAME, TUB MOUNT QTY.
WBH-16EAWD POWER BUGGY — PANEL ASSY. PANEL ASSY. PAGE 52 — MQ-WHITEMAN WBH-16EAWD POWER BUGGY — PARTS & OPERATION MANUAL — REV.
WBH-16EAWD POWER BUGGY — PANEL ASSY. PANEL ASSY. NO 1 2 3 4 5 6 7 8 9 10 11 PART NO 511476 511474 18008 18024 492597 18141 492364 492582 18140 492623 505401 PART NAME SCREW, ALLEN 1/8 X 1/4 FASTENER, ACCESS DOOR DOOR, ACCESS SCREW, WING 1/4-20X3/4 WASHER, FLAT 9.5X22.2 COVER, R/SIDE ENGINE SCREW, HHC 5/16-18X1 NUT, NYLOC 5/16-18 COVER, L/SIDE ENGINE WASHER, LOCK 5/16 SCREW, HHC 5/16-18X 1/2 QTY. 1 1 1 2 20 1 6 4 1 4 4 REMARKS MQ-WHITEMAN WBH-16EAWD POWER BUGGY — PARTS & OPERATION MANUAL — REV.
WBH-16EAWD POWER BUGGY — BRAKE ASSY. BRAKE ASSY. PAGE 54 — MQ-WHITEMAN WBH-16EAWD POWER BUGGY — PARTS & OPERATION MANUAL — REV.
WBH-16EAWD POWER BUGGY — BRAKE ASSY. BRAKE ASSY. NO 1 2 3 4 5 6 7 8 9 * 10 * 11 * 12 13 14 15 16 17 18 19 20 21 22 23 24 25 PART NO 511762 511698 511761 18111 492600 492584 18167 18307 18303 492395 18302 18032 18314 2105164 492303 505170 18016 492367 18015 492597 18145 512881 PART NAME QTY. REMARKS SCREW, HHC 1/2-13X8 1 CLEVIS, ASSY. BRAKE 2 NUT, HEX 3/8-24 NF 2 PEDAL, BRAKE 1 WASHER, FLAT 1/2 1 NUT, NYLOC 1/2-13 10 SPRING, BRAKE PEDAL 1 SPRING, BRAKE 2 BAND, BRAKE .......................................
WBH-16EAWD POWER BUGGY — STEERING ASSY. STEERING ASSY. PAGE 56 — MQ-WHITEMAN WBH-16EAWD POWER BUGGY — PARTS & OPERATION MANUAL — REV.
WBH-16EAWD POWER BUGGY — STEERING ASSY. STEERING ASSY.
WBH-16EAWD POWER BUGGY — CHASSIS ASSY. CHASSIS ASSY. PAGE 58 — MQ-WHITEMAN WBH-16EAWD POWER BUGGY — PARTS & OPERATION MANUAL — REV.
WBH-16EAWD POWER BUGGY — CHASSIS ASSY. CHASSIS ASSY. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 PART NO.
WBH-16EAWD POWER BUGGY — DUMP PEDAL AND HANDLE ASSY. DUMP PEDAL AND HANDLE ASSY. PAGE 60 — MQ-WHITEMAN WBH-16EAWD POWER BUGGY — PARTS & OPERATION MANUAL — REV.
WBH-16EAWD POWER BUGGY — DUMP PEDAL AND HANDLE ASSY. DUMP PEDAL AND HANDLE ASSY. NO. 1 2 3 4 5 6 7 8 9 * 10 11 12 13 14 15 16 17 18 19 PART NO. 492401 512184 18121 18065 512185 492622 512183 18064 492596 492581 492584 492600 18152 18123 511761 18153 492400 18122 PART NAME QTY. REMARKS SCREW, HHC 1/2- 13 X 4 1 NUT, NYLOC 3/16- 24 1 KNOB, LEVER 1 LEVER, DUMP VALVE 1 SCREW, HHC 1/4- 20 X1- 3/4 2 WASHER, LOCK 1/4 1 SCREW, HHC 3/16- 24 X1- 1/4 1 VALVE, DUMP ......................................1 ............
WBH-16EAWD POWER BUGGY — HYDRAULIC OIL TANK ASSY. HYDRAULIC OIL TANK ASSY. PAGE 62 — MQ-WHITEMAN WBH-16EAWD POWER BUGGY — PARTS & OPERATION MANUAL — REV.
WBH-16EAWD POWER BUGGY — HYDRAULIC OIL TANK ASSY. HYDRAULIC OIL TANK ASSY. NO. 1 2 3 4 5 6 7 8 9 10 11 PART NO. 3336 16477 18113 492375 491212 492598 492583 49123 492373 492624 18229 PART NAME SIGHT GAUGE, HYD. OIL TANK CAP, HYD. OIL TANK TANK HYD. OIL SCREW, HHC 3/8- 16 X1 PLUG, HYD. OIL TANK 1/2’’ WASHER, FLAT 3/8 NUT, NYLOC 3/8- 16 PLUG, HYD. OIL TANK 3/4 SCREW, HHC 3/8- 16 X 3/4 WASHER, LOCK 3/8 SCREEN, OIL RESERVOIR QTY.
WBH-16EAWD POWER BUGGY — BATTERY (OPTIONAL ELECTRIC START) HYDRAULIC OIL TANK ASSY. PAGE 64 — MQ-WHITEMAN WBH-16EAWD POWER BUGGY — PARTS & OPERATION MANUAL — REV.
WBH-16EAWD POWER BUGGY — BATTERY (OPTIONAL ELECTRIC START) BATTERY (OPTIONAL ELECTRIC START) NO. 2 4 6 8 10 12 14 16 18 20 22 24 PART NO. 505500 512557 511250 512555 492596 2101402 492595 508480 503118 503119 512585 4671 PART NAME QTY. REMARKS WINGNUT 2 BATTERY CABLE, NEGATIVE 1 BATTERY CABLE, POSITIVE 1 BATTERY SUPPORT BRACKET 1 WASHER, FLAT 1/4" 2 WASHER, LOCK 1/4" ............................. 2 ................
WBH-16EAWD POWER BUGGY — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 66 — MQ-WHITEMAN WBH-16EAWD POWER BUGGY — PARTS & OPERATION MANUAL — REV.
WBH-16EAWD POWER BUGGY — FUEL TANK ASSY. FUEL TANK ASSY. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PART NO.
TERMS AND CONDITIONS OF SALE — PARTS Effective: February 22, 2006 PAYMENT TERMS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Terms of payment for parts are net 30 days. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments are F.O.B. point of origin.
NOTE PAGE MQ-WHITEMAN WBH-16EAWD POWER BUGGY — PARTS & OPERATION MANUAL — REV.
OPERATION AND PARTS MANUAL HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING UNITED STATES Multiquip Corporate Office 18910 Wilmington Ave. Tel. (800) 421-1244 Carson, CA 90746 Fax (800) 537-3927 Contact: mq@multiquip.
