Specifications

BASIC FAXFINDER CONFIGURATION
Field Description
Tone Dial Select On for tone dialing or Off for pulse dialing. Default is On.
Fax Debugging If a communication error occurs when FaxFinder attempts to send or receive a fax, FaxFinder
creates a modem log file. This is available through the FaxFinder Web Management Log
menu. When you enable Fax Debugging, the log file provides more details about the fax call.
Select On if you want to log fax debugging information or Off if you do not.
Note: Multi-Tech recommends that you turn this on as needed to collect data for
troubleshooting and turn it off when you have the more detailed log file.
Routing Inbound Faxes
Select how you want inbound faxes routed:
■ Global Routing sends a copy of every incoming fax to the defined fax destination as well as to destinations
in the Lines or Recipients table.
■ Line Routing routes faxes for POTS lines/modems. Also defines a default fax destination when the incoming
fax does not include a valid recipient's extension.
■ Recipient Routing is based on the extension number. It requires that the Fax Configuration routing
parameter be set to DTMF Digits or a PBX Mode Code. This routing type requires the PBX/phone line to
provide DID extension information in the form of DTMF digits. FaxFinder matches the DID extension from
the PBX with the Recipients table to determine delivery options
You can define multiple fax destinations. Faxes can be delivered via email, sent to a printer, or written to a
network or SFTP share. You can also send incoming faxes directly to Trash.
1. Click Fax Configuration > Inbound Routing.
2. To configure inbound routing options, click Inbound Options. Select inbound fax options and click Save.
Refer to Inbound Options Fields for details.
3. Click Global Routing to add global fax destinations.
a. Click Edit, .
b. Click Add.
c. Select Destination Type from the drop down list and enter information required for that destination
type. Refer to Inbound Routing Destinations for details.
d. Click Save.
e. Repeat Steps b-d for each global destination. Click Done to return to the Inbound Routing page.
4. Click Lines to set the destination for POTS lines or incoming faxes that don't provide a valid extension.
You can enter multiple destinations for each line. By default, this is set to Email Fax to User: admin.
a. Click Edit , , for the line you want to configure.
b. Enter a Name, for example Sales Faxes, and click Save.
c. Click Add in the Destinations section.
d. Select Destination Type from the drop down list and enter information required for that destination
type. If you select Trash, you cannot define other destinations for this line. Refer to Inbound Routing
Destinations for destination details.
e. Click Save.
f. Repeat Steps c-e for each destination. Click Done to return to the Inbound Routing page.
36 FaxFinder
®
Fax Server FF240, FF440, FF840 Administrator Guide