Specifications

31
MA6
2 Remove the top cover from the MiniArray
III
by removing the seven cover mounting
screws located in the back of the MiniArray
III
. See figure 4-3.
3 Remove the chassis mounting screw from the card cage. See figure 4-4.
4 Partially remove the card cage and remove power cabling at midplane.
5 Remove power cables from the back of hard drive, floppy drive, and CD ROM drive.
6 Remove the three power supply mounting screws from the back of the MiniArray
III
.
7 Remove the power supply from the chassis.
8 To install a new power supply, follow steps 1-7 in reverse.