Owner`s manual
Table Of Contents
- Contents
- Chapter 1 - Introduction and Description
- Chapter 2 - Installation
- Chapter 3 - Software Installation
- Chapter 4 - Troubleshooting
- Introduction
- The Card Service does not enable my card
- How do I know the FAST Ethernet PC card is
- How do you enable the FAST Ethernet PC card?
- How do you make the card work under Systemsoft Card Service?
- How do you make the card work under Phoenix Socket/Card Service?
- How do you make the card work under Award Socket/Card Service?
- How can the ODI driver run successfully but fail to login to the Netware server?
- What to do should your Driver installation fail
- Chapter 5 - Service
- Appendix A - Regulatory Agency Information
- Index
![](/manual/multitech/mt10100zl-x-e/owner-s-manual-english/images/img-12.png)
Software Installation
13-MultiMobile
Menu Installation
1.Run INSTALL.EXE from the root directory of driver
diskette.
2.Select NetWare 3.x and 4.x Workstation item from
the Installation menu.
3.If current settings are acceptable, select Start Instal-
lation and go to step 5. Otherwise, select Modify
Parameters to make setting changes.
4. Move the cursor to highlight the settings you want
to change and press Enter to select an appropriate
value. When the configurations are set, press En-
ter on the OK field to exit the screen. The Installa-
tion program copies related files from the Drivers
diskette to the destination directory and modifies
the AUTOEXEC.BAT and NET.CFG files as
specified. The installation is complete.
5. Reboot the computer to make the NetWare connec-
tions. The Driver Installation screen is displayed:
Figure 3-2. Driver Installation Screen