Owner`s manual
Table Of Contents
- Contents
- Chapter 1 - Introduction and Description
- Chapter 2 - Installation
- Chapter 3 - Software Installation
- Chapter 4 - Troubleshooting
- Introduction
- The Card Service does not enable my card
- How do I know the FAST Ethernet PC card is
- How do you enable the FAST Ethernet PC card?
- How do you make the card work under Systemsoft Card Service?
- How do you make the card work under Phoenix Socket/Card Service?
- How do you make the card work under Award Socket/Card Service?
- How can the ODI driver run successfully but fail to login to the Netware server?
- What to do should your Driver installation fail
- Chapter 5 - Service
- Appendix A - Regulatory Agency Information
- Index
Software Installation
17-MultiMobile
to exit the screen and go back to step 4.
6.The Installation program copies related files from the
driver diskette to the destination directory and modi-
fies CONFIG.SYS and PROTOCOL.INI under
users agreement.
7. Reboot the computer to load driver and start LAN
Manager in batch.
8. Highlight Start Installation and press Enter to start
the LAN Manager in batch mode.
Figure 3-3. Microsoft LAN Manager
Installation Screen
Example of PROTOCOL.INI: used by LAN
Manager
[PROTMAN]
DRIVERNAME = PROTMAN$
DYNAMIC = YES
PRIORITY = NETBEUI
[NETBEUI_XIF]
Drivername = netbeui$
SESSIONS = 6
NCBS = 12
BINDINGS = LE100NDS_NIF
LANABASE = 0