Owner`s manual

Software Installation
20-MultiMobile
before Install Microsoft Windows Network and No
Additional Network. Press OK to go back the
Network Settings screen.
4.Click the Drivers... button to select network driver.
5.In the Network Drivers dialog box, press the Add
Adapter... button to enter Add Network Adapter
dialog box. Select Unlisted or Updated Network
Adapter and press OK.
6.Windows will prompt a Install Driver dialog box. In
this time, put the driver diskette into floppy drive
and press OK.
7.Select the Real mode NDIS2 for.... string and press
OK.
8.Follow Windows instructions to complete the instal-
lation and exit Windows.
9.Run INSTALL.EXE from root directory of driver dis-
kette.
10.Select Windows for Workgroups in Network Op-
erating System screen.
11.If current settings are acceptable, select Start
Installation and go to step 13. Otherwise, select
Modify Parameters to make setting changes.
12.Move cursor to focus on the setting you wish to
change and press Enter to select a new value. When
the configuration is set, press Enter on the OK field
to exit the screen and go back to step 11.
13.Select NDIS Server (LAN Manager,...) as the net-
work server you wish to attach and press Enter. The
Installation program starts to copy related files to
the destination directory and modifies
AUTOEXEC.BAT under users agreement.
14.Reboot the computer to have the selected driver take
effect.
ODI Driver for Workgroups
1.Run Windows for Workgroups and click the
Network Setup icon in the Network group.
2.In the Network Setup dialog box, click the