Owner`s manual
Table Of Contents
- Contents
- Chapter 1 - Introduction and Description
- Chapter 2 - Installation
- Chapter 3 - Software Installation
- Chapter 4 - Troubleshooting
- Introduction
- The Card Service does not enable my card
- How do I know the FAST Ethernet PC card is
- How do you enable the FAST Ethernet PC card?
- How do you make the card work under Systemsoft Card Service?
- How do you make the card work under Phoenix Socket/Card Service?
- How do you make the card work under Award Socket/Card Service?
- How can the ODI driver run successfully but fail to login to the Netware server?
- What to do should your Driver installation fail
- Chapter 5 - Service
- Appendix A - Regulatory Agency Information
- Index
Software Installation
23-MultiMobile
Windows 95 Installation
1. We assume that the PCMCIA Chipset drivers are
loaded and functioning. The System Icon in the Con-
trol Panel can report on its functionality. Any ques-
tions on this layer must be taken up with the
computers manufacturer.
2.Insert the PC Card into the slot. In New Hardware
Found dialog box, select Driver from disk provided
by hardware manufacturer.
Figure 3-4. Windows 95 Driver
Installation Screen
3. Type the full path (e.g., A:\) and insert the Instal-
lation disk.
4.For first time installation, click the Network icon in
Control Panel to add Protocols, Client and Service
if needed.
5.Reboot the computer; the card is now fully functional.
*: Should driver installation procedure fail, refer to
Chapter 4 Troubleshooting.