Owner`s manual
Table Of Contents
- Contents
- Chapter 1 - Introduction and Description
- Chapter 2 - Installation
- Chapter 3 - Software Installation
- Chapter 4 - Troubleshooting
- Introduction
- The Card Service does not enable my card
- How do I know the FAST Ethernet PC card is
- How do you enable the FAST Ethernet PC card?
- How do you make the card work under Systemsoft Card Service?
- How do you make the card work under Phoenix Socket/Card Service?
- How do you make the card work under Award Socket/Card Service?
- How can the ODI driver run successfully but fail to login to the Netware server?
- What to do should your Driver installation fail
- Chapter 5 - Service
- Appendix A - Regulatory Agency Information
- Index
Software Installation
25-MultiMobile
2.Double-click on the System Setup icon.
3.Double-click on the Selective Install icon.
4.Select the PCMCIA Support button.
5.Select PCMCIA system.
For example : select IBM ThinkPad 750
6.Click OK.
7.Click Install
8.Select the source drive and directory
For Example D:\OS2IMAGE
9.Click Install
10.Click OK
Section B
Install NDIS2 driver for IBM LAN Server 4.0
1.In the OS/2 Desktop group, double-click on the
MPTS icon.
2.Click on the Configure button.
3.Select the LAN adapters and protocols option.
4.Click on the Configure button.
5.Select the Other adapters ... option.
6.Insert the driver diskette and type the driver
path:
A:\OS2\NDIS2
Click on the OK button.
7.Select PCMCIA Ethernet Adapter, and then click on
the Add button.
8.Select IBM OS/2 NETBIOS, and then click on the
Add button.
9.Click OK.
10.Click Close.
11.Click Exit.
12.Shutdown and restart your system.
ODI Driver for IBM OS/2 Warp
Before driver installation, ensure that the PCMCIA is
installed and working properly. If the PCMCIA Ser-
vice of OS/2 Warp has been enabled, go directly to
section B (Install NetWare Request) for driver instal-